Merge branch 'phylib-consolidation'

Russell King says:

====================
phylib consolidation

Over the last few releases, there has been a push to clean up and
consolidate the phylib code. Some cases have been missed, and this
series catches those cases.

1. Remove redundant .aneg_done initialisers; calling genphy_aneg_done()
   for clause 22 PHYs is the default when .aneg_done is not set.

2. Some PHY drivers manually set phydev->pause and phydev->asym_pause,
   but we have a helper for this - phy_resolve_aneg_pause(), introduced
   in 2d880b8709c0 ("net: phy: extract pause mode").  Use this in the
   lxt, marvell and uPD60620 drivers.

   Incidentally, this brings up the question whether marvell fiber mode
   is correctly interpreting and advertising the pause parameters.

3. Add a genphy_check_and_restart_aneg() helper, which complements the
   clause 45 version of this. This will be useful for PHY drivers that
   open code this logic (e.g. marvell.c)

4. Add a genphy_read_status_fixed() helper to read the fixed-mode
   status from a clause 22 PHY.  lxt and marvell both contain copies
   of this code, so convert them over.

5. Arrange marvell driver to use genphy_read_lpa() for copper mode.
   This needs some rearrangement of the code in
   marvell_read_status_page_an(), but preserves using the PHY specific
   status register to derive the current negotiation results.

6. Simplify the marvell driver so we can use the
   genphy_read_status_fixed() helper directly rather than
   marvell_read_status_page_fixed().

7. Use positive logic in the marvell driver to determine the link
   state, and get rid of the REGISTER_LINK_STATUS definition; we
   already have a definition for this.

8. The marvell driver reads the PHY specific status register multiple
   times when determining the status: once in marvell_update_link()
   and again in marvell_read_status_page_an(). This is a waste;
   rearrange to read the status register once, and pass its value into
   marvell_read_status_page_an().  We preserve using
   genphy_update_link() for the copper side.

9. The marvell driver was using private clause 37 definitions, but we
   have clause 37 definitions in uapi/linux/mii.h. Use the generic
   definitions.

10. Switch the marvell driver to use phy_modify_changed() to modify
    the fiber advertisement.

11. Switch the marvell driver to use genphy_check_and_restart_aneg()
    introduced above rather than open-coding this functionality.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 129 insertions, 217 deletions

diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index 356bd6472f49..fec58ad69e02 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -190,27 +190,11 @@ static int lxt973a2_read_status(struct phy_device *phydev)
 				phydev->duplex = DUPLEX_FULL;
 		}
 
-		if (phydev->duplex == DUPLEX_FULL) {
-			phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
-			phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
-		}
+		phy_resolve_aneg_pause(phydev);
 	} else {
-		int bmcr = phy_read(phydev, MII_BMCR);
-
-		if (bmcr < 0)
-			return bmcr;
-
-		if (bmcr & BMCR_FULLDPLX)
-			phydev->duplex = DUPLEX_FULL;
-		else
-			phydev->duplex = DUPLEX_HALF;
-
-		if (bmcr & BMCR_SPEED1000)
-			phydev->speed = SPEED_1000;
-		else if (bmcr & BMCR_SPEED100)
-			phydev->speed = SPEED_100;
-		else
-			phydev->speed = SPEED_10;
+		err = genphy_read_status_fixed(phydev);
+		if (err < 0)
+			return err;
 
 		phydev->pause = phydev->asym_pause = 0;
 		linkmode_zero(phydev->lp_advertising);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index b1fbd1937328..28e33ece4ce1 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -162,19 +162,9 @@
 #define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII	0x1	/* SGMII to copper */
 #define MII_88E1510_GEN_CTRL_REG_1_RESET	0x8000	/* Soft reset */
 
-#define LPA_FIBER_1000HALF	0x40
-#define LPA_FIBER_1000FULL	0x20
-
 #define LPA_PAUSE_FIBER		0x180
 #define LPA_PAUSE_ASYM_FIBER	0x100
 
-#define ADVERTISE_FIBER_1000HALF	0x40
-#define ADVERTISE_FIBER_1000FULL	0x20
-
-#define ADVERTISE_PAUSE_FIBER		0x180
-#define ADVERTISE_PAUSE_ASYM_FIBER	0x100
-
-#define REGISTER_LINK_STATUS	0x400
 #define NB_FIBER_STATS	1
 
 MODULE_DESCRIPTION("Marvell PHY driver");
@@ -497,16 +487,15 @@ static inline u32 linkmode_adv_to_fiber_adv_t(unsigned long *advertise)
 	u32 result = 0;
 
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, advertise))
-		result |= ADVERTISE_FIBER_1000HALF;
+		result |= ADVERTISE_1000XHALF;
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, advertise))
-		result |= ADVERTISE_FIBER_1000FULL;
+		result |= ADVERTISE_1000XFULL;
 
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertise) &&
 	    linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertise))
-		result |= LPA_PAUSE_ASYM_FIBER;
+		result |= ADVERTISE_1000XPSE_ASYM;
 	else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertise))
-		result |= (ADVERTISE_PAUSE_FIBER
-			   & (~ADVERTISE_PAUSE_ASYM_FIBER));
+		result |= ADVERTISE_1000XPAUSE;
 
 	return result;
 }
@@ -524,7 +513,7 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev)
 {
 	int changed = 0;
 	int err;
-	int adv, oldadv;
+	u16 adv;
 
 	if (phydev->autoneg != AUTONEG_ENABLE)
 		return genphy_setup_forced(phydev);
@@ -533,44 +522,19 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev)
 	linkmode_and(phydev->advertising, phydev->advertising,
 		     phydev->supported);
 
-	/* Setup fiber advertisement */
-	adv = phy_read(phydev, MII_ADVERTISE);
-	if (adv < 0)
-		return adv;
-
-	oldadv = adv;
-	adv &= ~(ADVERTISE_FIBER_1000HALF | ADVERTISE_FIBER_1000FULL
-		| LPA_PAUSE_FIBER);
-	adv |= linkmode_adv_to_fiber_adv_t(phydev->advertising);
-
-	if (adv != oldadv) {
-		err = phy_write(phydev, MII_ADVERTISE, adv);
-		if (err < 0)
-			return err;
+	adv = linkmode_adv_to_fiber_adv_t(phydev->advertising);
 
+	/* Setup fiber advertisement */
+	err = phy_modify_changed(phydev, MII_ADVERTISE,
+				 ADVERTISE_1000XHALF | ADVERTISE_1000XFULL |
+				 ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM,
+				 adv);
+	if (err < 0)
+		return err;
+	if (err > 0)
 		changed = 1;
-	}
-
-	if (changed == 0) {
-		/* Advertisement hasn't changed, but maybe aneg was never on to
-		 * begin with?	Or maybe phy was isolated?
-		 */
-		int ctl = phy_read(phydev, MII_BMCR);
-
-		if (ctl < 0)
-			return ctl;
-
-		if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
-			changed = 1; /* do restart aneg */
-	}
 
-	/* Only restart aneg if we are advertising something different
-	 * than we were before.
-	 */
-	if (changed > 0)
-		changed = genphy_restart_aneg(phydev);
-
-	return changed;
+	return genphy_check_and_restart_aneg(phydev, changed);
 }
 
 static int m88e1510_config_aneg(struct phy_device *phydev)
@@ -1302,93 +1266,29 @@ static int m88e6390_config_aneg(struct phy_device *phydev)
 static void fiber_lpa_mod_linkmode_lpa_t(unsigned long *advertising, u32 lpa)
 {
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-			 advertising, lpa & LPA_FIBER_1000HALF);
+			 advertising, lpa & LPA_1000XHALF);
 
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-			 advertising, lpa & LPA_FIBER_1000FULL);
-}
-
-/**
- * marvell_update_link - update link status in real time in @phydev
- * @phydev: target phy_device struct
- *
- * Description: Update the value in phydev->link to reflect the
- *   current link value.
- */
-static int marvell_update_link(struct phy_device *phydev, int fiber)
-{
-	int status;
-
-	/* Use the generic register for copper link, or specific
-	 * register for fiber case
-	 */
-	if (fiber) {
-		status = phy_read(phydev, MII_M1011_PHY_STATUS);
-		if (status < 0)
-			return status;
-
-		if ((status & REGISTER_LINK_STATUS) == 0)
-			phydev->link = 0;
-		else
-			phydev->link = 1;
-	} else {
-		return genphy_update_link(phydev);
-	}
-
-	return 0;
+			 advertising, lpa & LPA_1000XFULL);
 }
 
 static int marvell_read_status_page_an(struct phy_device *phydev,
-				       int fiber)
+				       int fiber, int status)
 {
-	int status;
 	int lpa;
-	int lpagb;
-
-	status = phy_read(phydev, MII_M1011_PHY_STATUS);
-	if (status < 0)
-		return status;
-
-	lpa = phy_read(phydev, MII_LPA);
-	if (lpa < 0)
-		return lpa;
-
-	lpagb = phy_read(phydev, MII_STAT1000);
-	if (lpagb < 0)
-		return lpagb;
-
-	if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
-		phydev->duplex = DUPLEX_FULL;
-	else
-		phydev->duplex = DUPLEX_HALF;
-
-	status = status & MII_M1011_PHY_STATUS_SPD_MASK;
-	phydev->pause = 0;
-	phydev->asym_pause = 0;
-
-	switch (status) {
-	case MII_M1011_PHY_STATUS_1000:
-		phydev->speed = SPEED_1000;
-		break;
-
-	case MII_M1011_PHY_STATUS_100:
-		phydev->speed = SPEED_100;
-		break;
-
-	default:
-		phydev->speed = SPEED_10;
-		break;
-	}
+	int err;
 
 	if (!fiber) {
-		mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, lpa);
-		mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, lpagb);
+		err = genphy_read_lpa(phydev);
+		if (err < 0)
+			return err;
 
-		if (phydev->duplex == DUPLEX_FULL) {
-			phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
-			phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
-		}
+		phy_resolve_aneg_pause(phydev);
 	} else {
+		lpa = phy_read(phydev, MII_LPA);
+		if (lpa < 0)
+			return lpa;
+
 		/* The fiber link is only 1000M capable */
 		fiber_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
 
@@ -1405,31 +1305,25 @@ static int marvell_read_status_page_an(struct phy_device *phydev,
 			}
 		}
 	}
-	return 0;
-}
 
-static int marvell_read_status_page_fixed(struct phy_device *phydev)
-{
-	int bmcr = phy_read(phydev, MII_BMCR);
-
-	if (bmcr < 0)
-		return bmcr;
-
-	if (bmcr & BMCR_FULLDPLX)
+	if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
 		phydev->duplex = DUPLEX_FULL;
 	else
 		phydev->duplex = DUPLEX_HALF;
 
-	if (bmcr & BMCR_SPEED1000)
+	switch (status & MII_M1011_PHY_STATUS_SPD_MASK) {
+	case MII_M1011_PHY_STATUS_1000:
 		phydev->speed = SPEED_1000;
-	else if (bmcr & BMCR_SPEED100)
+		break;
+
+	case MII_M1011_PHY_STATUS_100:
 		phydev->speed = SPEED_100;
-	else
-		phydev->speed = SPEED_10;
+		break;
 
-	phydev->pause = 0;
-	phydev->asym_pause = 0;
-	linkmode_zero(phydev->lp_advertising);
+	default:
+		phydev->speed = SPEED_10;
+		break;
+	}
 
 	return 0;
 }
@@ -1444,25 +1338,38 @@ static int marvell_read_status_page_fixed(struct phy_device *phydev)
  */
 static int marvell_read_status_page(struct phy_device *phydev, int page)
 {
+	int status;
 	int fiber;
 	int err;
 
-	/* Detect and update the link, but return if there
-	 * was an error
+	status = phy_read(phydev, MII_M1011_PHY_STATUS);
+	if (status < 0)
+		return status;
+
+	/* Use the generic register for copper link status,
+	 * and the PHY status register for fiber link status.
 	 */
+	if (page == MII_MARVELL_FIBER_PAGE) {
+		phydev->link = !!(status & MII_M1011_PHY_STATUS_LINK);
+	} else {
+		err = genphy_update_link(phydev);
+		if (err)
+			return err;
+	}
+
 	if (page == MII_MARVELL_FIBER_PAGE)
 		fiber = 1;
 	else
 		fiber = 0;
 
-	err = marvell_update_link(phydev, fiber);
-	if (err)
-		return err;
+	linkmode_zero(phydev->lp_advertising);
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
 
 	if (phydev->autoneg == AUTONEG_ENABLE)
-		err = marvell_read_status_page_an(phydev, fiber);
+		err = marvell_read_status_page_an(phydev, fiber, status);
 	else
-		err = marvell_read_status_page_fixed(phydev);
+		err = genphy_read_status_fixed(phydev);
 
 	return err;
 }
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index d5f8f351d9ef..50214c081164 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -2404,7 +2404,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.soft_reset	= &genphy_soft_reset,
 	.config_init	= &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
-	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
 	.ack_interrupt	= &vsc85xx_ack_interrupt,
 	.config_intr	= &vsc85xx_config_intr,
@@ -2429,7 +2428,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
-	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
 	.ack_interrupt  = &vsc85xx_ack_interrupt,
 	.config_intr    = &vsc85xx_config_intr,
@@ -2454,7 +2452,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.soft_reset	= &genphy_soft_reset,
 	.config_init	= &vsc85xx_config_init,
 	.config_aneg	= &vsc85xx_config_aneg,
-	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
 	.ack_interrupt	= &vsc85xx_ack_interrupt,
 	.config_intr	= &vsc85xx_config_intr,
@@ -2479,7 +2476,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
-	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
 	.ack_interrupt  = &vsc85xx_ack_interrupt,
 	.config_intr    = &vsc85xx_config_intr,
@@ -2504,7 +2500,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
-	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
 	.ack_interrupt  = &vsc85xx_ack_interrupt,
 	.config_intr    = &vsc85xx_config_intr,
@@ -2530,7 +2525,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
-	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
 	.ack_interrupt  = &vsc85xx_ack_interrupt,
 	.config_intr    = &vsc85xx_config_intr,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 0887ed2bb050..ec19efe7ea99 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1771,6 +1771,36 @@ int genphy_restart_aneg(struct phy_device *phydev)
 EXPORT_SYMBOL(genphy_restart_aneg);
 
 /**
+ * genphy_check_and_restart_aneg - Enable and restart auto-negotiation
+ * @phydev: target phy_device struct
+ * @restart: whether aneg restart is requested
+ *
+ * Check, and restart auto-negotiation if needed.
+ */
+int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart)
+{
+	int ret = 0;
+
+	if (!restart) {
+		/* Advertisement hasn't changed, but maybe aneg was never on to
+		 * begin with?  Or maybe phy was isolated?
+		 */
+		ret = phy_read(phydev, MII_BMCR);
+		if (ret < 0)
+			return ret;
+
+		if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE))
+			restart = true;
+	}
+
+	if (restart)
+		ret = genphy_restart_aneg(phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL(genphy_check_and_restart_aneg);
+
+/**
  * __genphy_config_aneg - restart auto-negotiation or write BMCR
  * @phydev: target phy_device struct
  * @changed: whether autoneg is requested
@@ -1795,23 +1825,7 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed)
 	else if (err)
 		changed = true;
 
-	if (!changed) {
-		/* Advertisement hasn't changed, but maybe aneg was never on to
-		 * begin with?  Or maybe phy was isolated?
-		 */
-		int ctl = phy_read(phydev, MII_BMCR);
-
-		if (ctl < 0)
-			return ctl;
-
-		if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
-			changed = true; /* do restart aneg */
-	}
-
-	/* Only restart aneg if we are advertising something different
-	 * than we were before.
-	 */
-	return changed ? genphy_restart_aneg(phydev) : 0;
+	return genphy_check_and_restart_aneg(phydev, changed);
 }
 EXPORT_SYMBOL(__genphy_config_aneg);
 
@@ -1979,6 +1993,36 @@ int genphy_read_lpa(struct phy_device *phydev)
 EXPORT_SYMBOL(genphy_read_lpa);
 
 /**
+ * genphy_read_status_fixed - read the link parameters for !aneg mode
+ * @phydev: target phy_device struct
+ *
+ * Read the current duplex and speed state for a PHY operating with
+ * autonegotiation disabled.
+ */
+int genphy_read_status_fixed(struct phy_device *phydev)
+{
+	int bmcr = phy_read(phydev, MII_BMCR);
+
+	if (bmcr < 0)
+		return bmcr;
+
+	if (bmcr & BMCR_FULLDPLX)
+		phydev->duplex = DUPLEX_FULL;
+	else
+		phydev->duplex = DUPLEX_HALF;
+
+	if (bmcr & BMCR_SPEED1000)
+		phydev->speed = SPEED_1000;
+	else if (bmcr & BMCR_SPEED100)
+		phydev->speed = SPEED_100;
+	else
+		phydev->speed = SPEED_10;
+
+	return 0;
+}
+EXPORT_SYMBOL(genphy_read_status_fixed);
+
+/**
  * genphy_read_status - check the link status and update current link state
  * @phydev: target phy_device struct
  *
@@ -2012,22 +2056,9 @@ int genphy_read_status(struct phy_device *phydev)
 	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
 		phy_resolve_aneg_linkmode(phydev);
 	} else if (phydev->autoneg == AUTONEG_DISABLE) {
-		int bmcr = phy_read(phydev, MII_BMCR);
-
-		if (bmcr < 0)
-			return bmcr;
-
-		if (bmcr & BMCR_FULLDPLX)
-			phydev->duplex = DUPLEX_FULL;
-		else
-			phydev->duplex = DUPLEX_HALF;
-
-		if (bmcr & BMCR_SPEED1000)
-			phydev->speed = SPEED_1000;
-		else if (bmcr & BMCR_SPEED100)
-			phydev->speed = SPEED_100;
-		else
-			phydev->speed = SPEED_10;
+		err = genphy_read_status_fixed(phydev);
+		if (err < 0)
+			return err;
 	}
 
 	return 0;
@@ -2575,7 +2606,6 @@ static struct phy_driver genphy_driver = {
 	.name		= "Generic PHY",
 	.soft_reset	= genphy_no_soft_reset,
 	.get_features	= genphy_read_abilities,
-	.aneg_done	= genphy_aneg_done,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 	.set_loopback   = genphy_loopback,
diff --git a/drivers/net/phy/uPD60620.c b/drivers/net/phy/uPD60620.c
index a32b3fd8a370..38834347a427 100644
--- a/drivers/net/phy/uPD60620.c
+++ b/drivers/net/phy/uPD60620.c
@@ -68,12 +68,7 @@ static int upd60620_read_status(struct phy_device *phydev)
 			mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising,
 						  phy_state);
 
-			if (phydev->duplex == DUPLEX_FULL) {
-				if (phy_state & LPA_PAUSE_CAP)
-					phydev->pause = 1;
-				if (phy_state & LPA_PAUSE_ASYM)
-					phydev->asym_pause = 1;
-			}
+			phy_resolve_aneg_pause(phydev);
 		}
 	}
 	return 0;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 5032d453ac66..b2105e0d72d3 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1094,11 +1094,13 @@ void phy_attached_info(struct phy_device *phydev);
 int genphy_read_abilities(struct phy_device *phydev);
 int genphy_setup_forced(struct phy_device *phydev);
 int genphy_restart_aneg(struct phy_device *phydev);
+int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart);
 int genphy_config_eee_advert(struct phy_device *phydev);
 int __genphy_config_aneg(struct phy_device *phydev, bool changed);
 int genphy_aneg_done(struct phy_device *phydev);
 int genphy_update_link(struct phy_device *phydev);
 int genphy_read_lpa(struct phy_device *phydev);
+int genphy_read_status_fixed(struct phy_device *phydev);
 int genphy_read_status(struct phy_device *phydev);
 int genphy_suspend(struct phy_device *phydev);
 int genphy_resume(struct phy_device *phydev);