Merge branch 'broadcom-MDIO-turn-around'

Florian Fainelli says:

====================
net: broadcom MDIO support for broken turn-around

These two patches update the GENET and UniMAC MDIO controllers to deal with
PHYs that are known to have a broken turn-around bug (e.g: BCM53125 and others)

This utilizes the infrastructure that code recently added to do that in 'net-next'.

Note that the changes look nearly identical and I will try to address the MDIO
code duplication between GENET and UniMAC in a future patch series.

Changes in v2:
- remove brcmphy.h include in mdio-bcm-unimac.c
- use the same comment as with GENET's MDIO read function
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 13 insertions, 2 deletions

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 420949cc55aa..6bef04e2f735 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -47,7 +47,12 @@ static int bcmgenet_mii_read(struct mii_bus *bus, int phy_id, int location)
 			   HZ / 100);
 	ret = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD);
 
-	if (ret & MDIO_READ_FAIL)
+	/* Some broken devices are known not to release the line during
+	 * turn-around, e.g: Broadcom BCM53125 external switches, so check for
+	 * that condition here and ignore the MDIO controller read failure
+	 * indication.
+	 */
+	if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (ret & MDIO_READ_FAIL))
 		return -EIO;
 
 	return ret & 0xffff;
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index 414fdf1f343f..fc7abc50b4f1 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -81,7 +81,13 @@ static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 		return -ETIMEDOUT;
 
 	cmd = __raw_readl(priv->base + MDIO_CMD);
-	if (cmd & MDIO_READ_FAIL)
+
+	/* Some broken devices are known not to release the line during
+	 * turn-around, e.g: Broadcom BCM53125 external switches, so check for
+	 * that condition here and ignore the MDIO controller read failure
+	 * indication.
+	 */
+	if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (cmd & MDIO_READ_FAIL))
 		return -EIO;
 
 	return cmd & 0xffff;