aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorArjun Vynipadath <arjun@chelsio.com>2018-05-24 19:33:37 +0530
committerDavid S. Miller <davem@davemloft.net>2018-05-25 15:10:07 -0400
commite2f4f4e927f1356d561f612f1c55d64654f60353 (patch)
treed1b1745d736331e32a67420122c2486458a1d79a
parentcxgb4: clean up init_one (diff)
downloadlinux-dev-e2f4f4e927f1356d561f612f1c55d64654f60353.tar.xz
linux-dev-e2f4f4e927f1356d561f612f1c55d64654f60353.zip
cxgb4/cxgb4vf: Notify link changes to OS-dependent code
We have a confusion of two different abstractions in the Common Code: Physical Link (Port) and Logical Network Interface (Virtual Interface), and we haven't been properly managing the state of the intersection of those two abstractions. On the one hand we have the Physical state of the Link -- up or down -- and on the other we have the logical state of the VI, enabled or not. {ethN} refers to both the Physical and Logical State. In this case, ifconfig only affects/interrogates the Logical State of a VI, and ethtool only deals with the Physical State. And these are different. So, just because we disable the VI, we don't really want to change the Physical Link Up/Down state. Thus, the previous hack to set "lc->link_ok = 0" when we disable a VI is completely incorrect. Where we get into trouble is where the Physical Link State and the Logical VI State cross swords. And that happens in t4_handle_get_port_info() where we need to manage/safe the Physical Link State, but we also need to know when the Logical VI State has changed and pass that back up to the OS-dependent Driver routine t4_os_link_changed() which is concerned about the Logical Interface. So we enable a VI and that causes Firmware to send us a new Port Information message, but if none of the Physical Link State particulars have changed, we don't call t4_os_link_changed(). This fix uses the existing OS Contract APIs for the Common Code to inform the OS-dependent portion of the Host Driver when the "Link" (really Logical Network Interface) is "up" or "down". A new API t4_enable_pi_params() is added which calls t4_enable_vi_params() and, if that is successful, then calls back to the OS Contract API t4_os_link_changed() notifying the OS-dependent layer of the potential Link State change. Original Work by : Casey Leedom <leedom@chelsio.com> Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4.h3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c5
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_hw.c28
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c5
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h5
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c24
6 files changed, 64 insertions, 6 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 0f305d97f4ee..0dbe2d9e22d6 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -1738,6 +1738,9 @@ int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid,
bool ucast, u64 vec, bool sleep_ok);
int t4_enable_vi_params(struct adapter *adap, unsigned int mbox,
unsigned int viid, bool rx_en, bool tx_en, bool dcb_en);
+int t4_enable_pi_params(struct adapter *adap, unsigned int mbox,
+ struct port_info *pi,
+ bool rx_en, bool tx_en, bool dcb_en);
int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
bool rx_en, bool tx_en);
int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid,
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 903c0af37456..0efae2030e71 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -465,7 +465,7 @@ static int link_start(struct net_device *dev)
&pi->link_cfg);
if (ret == 0) {
local_bh_disable();
- ret = t4_enable_vi_params(pi->adapter, mb, pi->viid, true,
+ ret = t4_enable_pi_params(pi->adapter, mb, pi, true,
true, CXGB4_DCB_ENABLED);
local_bh_enable();
}
@@ -2344,7 +2344,8 @@ static int cxgb_close(struct net_device *dev)
netif_tx_stop_all_queues(dev);
netif_carrier_off(dev);
- ret = t4_enable_vi(adapter, adapter->pf, pi->viid, false, false);
+ ret = t4_enable_pi_params(adapter, adapter->pf, pi,
+ false, false, false);
#ifdef CONFIG_CHELSIO_T4_DCB
cxgb4_dcb_reset(dev);
dcb_tx_queue_prio_enable(dev, false);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 962384cdd64b..39da7e3c804b 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -8014,6 +8014,34 @@ int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
}
/**
+ * t4_enable_pi_params - enable/disable a Port's Virtual Interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pi: the Port Information structure
+ * @rx_en: 1=enable Rx, 0=disable Rx
+ * @tx_en: 1=enable Tx, 0=disable Tx
+ * @dcb_en: 1=enable delivery of Data Center Bridging messages.
+ *
+ * Enables/disables a Port's Virtual Interface. Note that setting DCB
+ * Enable only makes sense when enabling a Virtual Interface ...
+ * If the Virtual Interface enable/disable operation is successful,
+ * we notify the OS-specific code of a potential Link Status change
+ * via the OS Contract API t4_os_link_changed().
+ */
+int t4_enable_pi_params(struct adapter *adap, unsigned int mbox,
+ struct port_info *pi,
+ bool rx_en, bool tx_en, bool dcb_en)
+{
+ int ret = t4_enable_vi_params(adap, mbox, pi->viid,
+ rx_en, tx_en, dcb_en);
+ if (ret)
+ return ret;
+ t4_os_link_changed(adap, pi->port_id,
+ rx_en && tx_en && pi->link_cfg.link_ok);
+ return 0;
+}
+
+/**
* t4_identify_port - identify a VI's port by blinking its LED
* @adap: the adapter
* @mbox: mailbox to use for the FW command
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 71f13bd2b5e4..ff84791a0ff8 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -274,7 +274,7 @@ static int link_start(struct net_device *dev)
* is enabled on a port.
*/
if (ret == 0)
- ret = t4vf_enable_vi(pi->adapter, pi->viid, true, true);
+ ret = t4vf_enable_pi(pi->adapter, pi, true, true);
/* The Virtual Interfaces are connected to an internal switch on the
* chip which allows VIs attached to the same port to talk to each
@@ -822,8 +822,7 @@ static int cxgb4vf_stop(struct net_device *dev)
netif_tx_stop_all_queues(dev);
netif_carrier_off(dev);
- t4vf_enable_vi(adapter, pi->viid, false, false);
- pi->link_cfg.link_ok = 0;
+ t4vf_enable_pi(adapter, pi, false, false);
clear_bit(pi->port_id, &adapter->open_device_map);
if (adapter->open_device_map == 0)
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
index 712e8f0c71b4..ccca67cf4487 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
@@ -391,7 +391,10 @@ int t4vf_config_rss_range(struct adapter *, unsigned int, int, int,
int t4vf_alloc_vi(struct adapter *, int);
int t4vf_free_vi(struct adapter *, int);
-int t4vf_enable_vi(struct adapter *, unsigned int, bool, bool);
+int t4vf_enable_vi(struct adapter *adapter, unsigned int viid, bool rx_en,
+ bool tx_en);
+int t4vf_enable_pi(struct adapter *adapter, struct port_info *pi, bool rx_en,
+ bool tx_en);
int t4vf_identify_port(struct adapter *, unsigned int, unsigned int);
int t4vf_set_rxmode(struct adapter *, unsigned int, int, int, int, int, int,
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
index 8786431a8825..5b8c08cf523f 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
@@ -1400,6 +1400,30 @@ int t4vf_enable_vi(struct adapter *adapter, unsigned int viid,
}
/**
+ * t4vf_enable_pi - enable/disable a Port's virtual interface
+ * @adapter: the adapter
+ * @pi: the Port Information structure
+ * @rx_en: 1=enable Rx, 0=disable Rx
+ * @tx_en: 1=enable Tx, 0=disable Tx
+ *
+ * Enables/disables a Port's virtual interface. If the Virtual
+ * Interface enable/disable operation is successful, we notify the
+ * OS-specific code of a potential Link Status change via the OS Contract
+ * API t4vf_os_link_changed().
+ */
+int t4vf_enable_pi(struct adapter *adapter, struct port_info *pi,
+ bool rx_en, bool tx_en)
+{
+ int ret = t4vf_enable_vi(adapter, pi->viid, rx_en, tx_en);
+
+ if (ret)
+ return ret;
+ t4vf_os_link_changed(adapter, pi->pidx,
+ rx_en && tx_en && pi->link_cfg.link_ok);
+ return 0;
+}
+
+/**
* t4vf_identify_port - identify a VI's port by blinking its LED
* @adapter: the adapter
* @viid: the Virtual Interface ID