aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDavid Fries <david@fries.net>2008-08-17 23:03:40 -0500
committerIngo Molnar <mingo@elte.hu>2008-08-18 08:50:19 +0200
commite532c06f2a835b5cc4f4166f467437d9b09c1d0e (patch)
tree762fa0f0c22dc1af7d9d6e918f4d48ced8910a4e
parentx86: mpparse.c: fix section mismatch warning (diff)
downloadlinux-dev-e532c06f2a835b5cc4f4166f467437d9b09c1d0e.tar.xz
linux-dev-e532c06f2a835b5cc4f4166f467437d9b09c1d0e.zip
x86: fix i486 suspend to disk CR4 oops
arch/x86/power/cpu_32.c __save_processor_state calls read_cr4() only a i486 CPU doesn't have the CR4 register. Trying to read it produces an invalid opcode oops during suspend to disk. Use the safe rc4 reading op instead. If the value to be written is zero the write is skipped. arch/x86/power/hibernate_asm_32.S done: swapped the use of %eax and %ecx to use jecxz for the zero test and jump over store to %cr4. restore_image: s/%ecx/%eax/ to be consistent with done: In addition to __save_processor_state, acpi_save_state_mem, efi_call_phys_prelog, and efi_call_phys_epilog had checks added (acpi restore was in assembly and already had a check for non-zero). There were other reads and writes of CR4, but MCE and virtualization shouldn't be executed on a i486 anyway. Signed-off-by: David Fries <david@fries.net> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-rw-r--r--arch/x86/kernel/acpi/sleep.c2
-rw-r--r--arch/x86/kernel/efi_32.c4
-rw-r--r--arch/x86/power/cpu_32.c6
-rw-r--r--arch/x86/power/hibernate_asm_32.S26
4 files changed, 22 insertions, 16 deletions
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 81e5ab6542d8..426e5d91b63a 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -86,7 +86,7 @@ int acpi_save_state_mem(void)
#endif /* !CONFIG_64BIT */
header->pmode_cr0 = read_cr0();
- header->pmode_cr4 = read_cr4();
+ header->pmode_cr4 = read_cr4_safe();
header->realmode_flags = acpi_realmode_flags;
header->real_magic = 0x12345678;
diff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c
index 4b63c8e1f13b..5cab48ee61a4 100644
--- a/arch/x86/kernel/efi_32.c
+++ b/arch/x86/kernel/efi_32.c
@@ -53,7 +53,7 @@ void efi_call_phys_prelog(void)
* directory. If I have PAE, I just need to duplicate one entry in
* page directory.
*/
- cr4 = read_cr4();
+ cr4 = read_cr4_safe();
if (cr4 & X86_CR4_PAE) {
efi_bak_pg_dir_pointer[0].pgd =
@@ -91,7 +91,7 @@ void efi_call_phys_epilog(void)
gdt_descr.size = GDT_SIZE - 1;
load_gdt(&gdt_descr);
- cr4 = read_cr4();
+ cr4 = read_cr4_safe();
if (cr4 & X86_CR4_PAE) {
swapper_pg_dir[pgd_index(0)].pgd =
diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c
index 7dc5d5cf50a2..d3e083dea720 100644
--- a/arch/x86/power/cpu_32.c
+++ b/arch/x86/power/cpu_32.c
@@ -45,7 +45,7 @@ static void __save_processor_state(struct saved_context *ctxt)
ctxt->cr0 = read_cr0();
ctxt->cr2 = read_cr2();
ctxt->cr3 = read_cr3();
- ctxt->cr4 = read_cr4();
+ ctxt->cr4 = read_cr4_safe();
}
/* Needed by apm.c */
@@ -98,7 +98,9 @@ static void __restore_processor_state(struct saved_context *ctxt)
/*
* control registers
*/
- write_cr4(ctxt->cr4);
+ /* cr4 was introduced in the Pentium CPU */
+ if (ctxt->cr4)
+ write_cr4(ctxt->cr4);
write_cr3(ctxt->cr3);
write_cr2(ctxt->cr2);
write_cr0(ctxt->cr0);
diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S
index b95aa6cfe3cb..4fc7e872c85e 100644
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -28,9 +28,9 @@ ENTRY(swsusp_arch_suspend)
ret
ENTRY(restore_image)
- movl resume_pg_dir, %ecx
- subl $__PAGE_OFFSET, %ecx
- movl %ecx, %cr3
+ movl resume_pg_dir, %eax
+ subl $__PAGE_OFFSET, %eax
+ movl %eax, %cr3
movl restore_pblist, %edx
.p2align 4,,7
@@ -52,17 +52,21 @@ copy_loop:
done:
/* go back to the original page tables */
- movl $swapper_pg_dir, %ecx
- subl $__PAGE_OFFSET, %ecx
- movl %ecx, %cr3
+ movl $swapper_pg_dir, %eax
+ subl $__PAGE_OFFSET, %eax
+ movl %eax, %cr3
/* Flush TLB, including "global" things (vmalloc) */
- movl mmu_cr4_features, %eax
- movl %eax, %edx
+ movl mmu_cr4_features, %ecx
+ jecxz 1f # cr4 Pentium and higher, skip if zero
+ movl %ecx, %edx
andl $~(1<<7), %edx; # PGE
movl %edx, %cr4; # turn off PGE
- movl %cr3, %ecx; # flush TLB
- movl %ecx, %cr3
- movl %eax, %cr4; # turn PGE back on
+1:
+ movl %cr3, %eax; # flush TLB
+ movl %eax, %cr3
+ jecxz 1f # cr4 Pentium and higher, skip if zero
+ movl %ecx, %cr4; # turn PGE back on
+1:
movl saved_context_esp, %esp
movl saved_context_ebp, %ebp