diff options
| author |   Koen Kooi <koen@dominion.thruhere.net> | 2013-09-12 20:35:35 +0200 |
|---|---|---|
| committer |   Benoit Cousson <bcousson@baylibre.com> | 2013-10-11 21:06:31 +0200 |
| commit | ec8a75979f199fd6fdcf24f8d1c928a48c61483e (patch) | |
| tree | a316581e58ad17e9b27d8faaf62ca0dfffb083d1 | |
| parent | ARM: dts: am335x-bone-common: switch mmc1 to 4-bit mode (diff) | |
ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers
This matches the vendor 3.8.x configuration that is shipping
with the boards.
The LED layout is now:
USR0: heartbeat
USR1: mmc0 (micro-SD slot)
USR2: cpu0
USR3: mmc1 (eMMC)
The cpu0 triggers was put in between the mmc triggers to make
is easier to see where the disk activity is.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Tested-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
| -rw-r--r-- | arch/arm/boot/dts/am335x-bone-common.dtsi | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index fbb11dd76f08..56361ceb418b 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -204,12 +204,14 @@ led@4 { label = "beaglebone:green:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; default-state = "off"; }; led@5 { label = "beaglebone:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; default-state = "off"; }; }; |