aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-06-26 11:54:29 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-06-26 11:54:29 -0700
commitf5dcb68086ba2e033b2af32b0da0c7a7c7872a09 (patch)
tree89c41089b492f8d8d411185bd7cb07538802e837
parentMerge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc (diff)
parentdrivers: soc: sunxi: Introduce SoC driver to map SRAMs (diff)
downloadlinux-dev-f5dcb68086ba2e033b2af32b0da0c7a7c7872a09.tar.xz
linux-dev-f5dcb68086ba2e033b2af32b0da0c7a7c7872a09.zip
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Kevin Hilman: "Some of these are for drivers/soc, where we're now putting SoC-specific drivers these days. Some are for other driver subsystems where we have received acks from the appropriate maintainers. Some highlights: - simple-mfd: document DT bindings and misc updates - migrate mach-berlin to simple-mfd for clock, pinctrl and reset - memory: support for Tegra132 SoC - memory: introduce tegra EMC driver for scaling memory frequency - misc. updates for ARM CCI and CCN busses" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: soc: sunxi: Introduce SoC driver to map SRAMs arm-cci: Add aliases for PMU events arm-cci: Add CCI-500 PMU support arm-cci: Sanitise CCI400 PMU driver specific code arm-cci: Abstract handling for CCI events arm-cci: Abstract out the PMU counter details arm-cci: Cleanup PMU driver code arm-cci: Do not enable CCI-400 PMU by default firmware: qcom: scm: Add HDCP Support ARM: berlin: add an ADC node for the BG2Q ARM: berlin: remove useless chip and system ctrl compatibles clk: berlin: drop direct of_iomap of nodes reg property ARM: berlin: move BG2Q clock node ARM: berlin: move BG2CD clock node ARM: berlin: move BG2 clock node clk: berlin: prepare simple-mfd conversion pinctrl: berlin: drop SoC stub provided regmap ARM: berlin: move pinctrl to simple-mfd nodes pinctrl: berlin: prepare to use regmap provided by syscon reset: berlin: drop arch_initcall initialization ...
-rw-r--r--Documentation/arm/CCN.txt17
-rw-r--r--Documentation/devicetree/bindings/arm/cci.txt4
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt84
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt374
-rw-r--r--Documentation/devicetree/bindings/mfd/mfd.txt41
-rw-r--r--Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt2
-rw-r--r--Documentation/devicetree/bindings/soc/sunxi/sram.txt72
-rw-r--r--arch/arm/boot/dts/arm-realview-pb1176.dts2
-rw-r--r--arch/arm/boot/dts/berlin2.dtsi90
-rw-r--r--arch/arm/boot/dts/berlin2cd.dtsi66
-rw-r--r--arch/arm/boot/dts/berlin2q.dtsi120
-rw-r--r--arch/arm/boot/dts/integrator.dtsi4
-rw-r--r--arch/arm/mach-berlin/Kconfig1
-rw-r--r--arch/arm64/boot/dts/arm/juno-motherboard.dtsi68
-rw-r--r--arch/arm64/configs/defconfig6
-rw-r--r--drivers/bus/Kconfig31
-rw-r--r--drivers/bus/arm-cci.c905
-rw-r--r--drivers/bus/arm-ccn.c270
-rw-r--r--drivers/clk/berlin/bg2.c7
-rw-r--r--drivers/clk/berlin/bg2q.c7
-rw-r--r--drivers/firmware/Makefile3
-rw-r--r--drivers/firmware/qcom_scm-32.c503
-rw-r--r--drivers/firmware/qcom_scm.c474
-rw-r--r--drivers/firmware/qcom_scm.h47
-rw-r--r--drivers/iommu/Kconfig2
-rw-r--r--drivers/iommu/tegra-smmu.c109
-rw-r--r--drivers/leds/leds-syscon.c170
-rw-r--r--drivers/memory/tegra/Kconfig10
-rw-r--r--drivers/memory/tegra/Makefile3
-rw-r--r--drivers/memory/tegra/mc.c143
-rw-r--r--drivers/memory/tegra/mc.h4
-rw-r--r--drivers/memory/tegra/tegra114.c32
-rw-r--r--drivers/memory/tegra/tegra124-emc.c1140
-rw-r--r--drivers/memory/tegra/tegra124.c123
-rw-r--r--drivers/memory/tegra/tegra30.c32
-rw-r--r--drivers/of/platform.c1
-rw-r--r--drivers/pinctrl/berlin/berlin-bg2.c26
-rw-r--r--drivers/pinctrl/berlin/berlin-bg2cd.c26
-rw-r--r--drivers/pinctrl/berlin/berlin-bg2q.c26
-rw-r--r--drivers/pinctrl/berlin/berlin.c9
-rw-r--r--drivers/reset/reset-berlin.c74
-rw-r--r--drivers/soc/Kconfig1
-rw-r--r--drivers/soc/Makefile1
-rw-r--r--drivers/soc/qcom/Kconfig7
-rw-r--r--drivers/soc/qcom/Makefile1
-rw-r--r--drivers/soc/qcom/spm.c385
-rw-r--r--drivers/soc/sunxi/Kconfig10
-rw-r--r--drivers/soc/sunxi/Makefile1
-rw-r--r--drivers/soc/sunxi/sunxi_sram.c284
-rw-r--r--drivers/soc/tegra/fuse/tegra-apbmisc.c21
-rw-r--r--include/linux/qcom_scm.h13
-rw-r--r--include/linux/soc/sunxi/sunxi_sram.h19
-rw-r--r--include/soc/tegra/emc.h19
-rw-r--r--include/soc/tegra/fuse.h1
-rw-r--r--include/soc/tegra/mc.h20
55 files changed, 4844 insertions, 1067 deletions
diff --git a/Documentation/arm/CCN.txt b/Documentation/arm/CCN.txt
index 0632b3aad83e..ffca443a19b4 100644
--- a/Documentation/arm/CCN.txt
+++ b/Documentation/arm/CCN.txt
@@ -33,20 +33,23 @@ directory, with first 8 configurable by user and additional
Cycle counter is described by a "type" value 0xff and does
not require any other settings.
+The driver also provides a "cpumask" sysfs attribute, which contains
+a single CPU ID, of the processor which will be used to handle all
+the CCN PMU events. It is recommended that the user space tools
+request the events on this processor (if not, the perf_event->cpu value
+will be overwritten anyway). In case of this processor being offlined,
+the events are migrated to another one and the attribute is updated.
+
Example of perf tool use:
/ # perf list | grep ccn
ccn/cycles/ [Kernel PMU event]
<...>
- ccn/xp_valid_flit/ [Kernel PMU event]
+ ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/ [Kernel PMU event]
<...>
-/ # perf stat -C 0 -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+/ # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
sleep 1
The driver does not support sampling, therefore "perf record" will
-not work. Also notice that only single cpu is being selected
-("-C 0") - this is because perf framework does not support
-"non-CPU related" counters (yet?) so system-wide session ("-a")
-would try (and in most cases fail) to set up the same event
-per each CPU.
+not work. Per-task (without "-a") perf sessions are not supported.
diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
index 3c5c631328d3..aef1d200a9b2 100644
--- a/Documentation/devicetree/bindings/arm/cci.txt
+++ b/Documentation/devicetree/bindings/arm/cci.txt
@@ -31,8 +31,9 @@ specific to ARM.
- compatible
Usage: required
Value type: <string>
- Definition: must be set to
+ Definition: must contain one of the following:
"arm,cci-400"
+ "arm,cci-500"
- reg
Usage: required
@@ -99,6 +100,7 @@ specific to ARM.
"arm,cci-400-pmu,r1"
"arm,cci-400-pmu" - DEPRECATED, permitted only where OS has
secure acces to CCI registers
+ "arm,cci-500-pmu,r0"
- reg:
Usage: required
Value type: Integer cells. A register entry, expressed
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
index f3db93c85eea..3338a2834ad7 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
@@ -1,6 +1,9 @@
NVIDIA Tegra Memory Controller device tree bindings
===================================================
+memory-controller node
+----------------------
+
Required properties:
- compatible: Should be "nvidia,tegra<chip>-mc"
- reg: Physical base address and length of the controller's registers.
@@ -15,9 +18,49 @@ Required properties:
This device implements an IOMMU that complies with the generic IOMMU binding.
See ../iommu/iommu.txt for details.
-Example:
---------
+emc-timings subnode
+-------------------
+
+The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in
+register PMC_STRAPPING_OPT_A).
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for.
+
+timing subnode
+--------------
+
+Each "emc-timings" node should contain a subnode for every supported EMC clock rate.
+
+Required properties for timing nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC
+(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be
+specified, according to the board documentation:
+
+ MC_EMEM_ARB_CFG
+ MC_EMEM_ARB_OUTSTANDING_REQ
+ MC_EMEM_ARB_TIMING_RCD
+ MC_EMEM_ARB_TIMING_RP
+ MC_EMEM_ARB_TIMING_RC
+ MC_EMEM_ARB_TIMING_RAS
+ MC_EMEM_ARB_TIMING_FAW
+ MC_EMEM_ARB_TIMING_RRD
+ MC_EMEM_ARB_TIMING_RAP2PRE
+ MC_EMEM_ARB_TIMING_WAP2PRE
+ MC_EMEM_ARB_TIMING_R2R
+ MC_EMEM_ARB_TIMING_W2W
+ MC_EMEM_ARB_TIMING_R2W
+ MC_EMEM_ARB_TIMING_W2R
+ MC_EMEM_ARB_DA_TURNS
+ MC_EMEM_ARB_DA_COVERS
+ MC_EMEM_ARB_MISC0
+ MC_EMEM_ARB_MISC1
+ MC_EMEM_ARB_RING1_THROTTLE
+Example SoC include file:
+
+/ {
mc: memory-controller@0,70019000 {
compatible = "nvidia,tegra124-mc";
reg = <0x0 0x70019000 0x0 0x1000>;
@@ -34,3 +77,40 @@ Example:
...
iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
};
+};
+
+Example board file:
+
+/ {
+ memory-controller@0,70019000 {
+ emc-timings-3 {
+ nvidia,ram-code = <3>;
+
+ timing-12750000 {
+ clock-frequency = <12750000>;
+
+ nvidia,emem-configuration = <
+ 0x40040001 /* MC_EMEM_ARB_CFG */
+ 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+ 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+ 0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+ 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+ 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+ 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+ 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+ 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+ 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+ 0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+ 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+ 0x77e30303 /* MC_EMEM_ARB_MISC0 */
+ 0x70000f03 /* MC_EMEM_ARB_MISC1 */
+ 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+ >;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt b/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
new file mode 100644
index 000000000000..b59c625d6336
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
@@ -0,0 +1,374 @@
+NVIDIA Tegra124 SoC EMC (external memory controller)
+====================================================
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-emc".
+- reg : physical base address and length of the controller's registers.
+- nvidia,memory-controller : phandle of the MC driver.
+
+The node should contain a "emc-timings" subnode for each supported RAM type
+(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address
+being its RAM_CODE.
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is
+used for.
+
+Each "emc-timings" node should contain a "timing" subnode for every supported
+EMC clock rate. The "timing" subnodes should have the clock rate in Hz as
+their unit address.
+
+Required properties for "timing" nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- The following properties contain EMC timing characterization values
+(specified in the board documentation) :
+ - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG
+ - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2
+ - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3
+ - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL
+ - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0
+ - nvidia,emc-cfg : EMC_CFG
+ - nvidia,emc-cfg-2 : EMC_CFG_2
+ - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL
+ - nvidia,emc-mode-1 : Mode Register 1
+ - nvidia,emc-mode-2 : Mode Register 2
+ - nvidia,emc-mode-4 : Mode Register 4
+ - nvidia,emc-mode-reset : Mode Register 0
+ - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT
+ - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL
+ - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2
+ - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change
+ - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL
+- nvidia,emc-configuration : EMC timing characterization data. These are the
+registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to
+be specified, according to the board documentation:
+
+ EMC_RC
+ EMC_RFC
+ EMC_RFC_SLR
+ EMC_RAS
+ EMC_RP
+ EMC_R2W
+ EMC_W2R
+ EMC_R2P
+ EMC_W2P
+ EMC_RD_RCD
+ EMC_WR_RCD
+ EMC_RRD
+ EMC_REXT
+ EMC_WEXT
+ EMC_WDV
+ EMC_WDV_MASK
+ EMC_QUSE
+ EMC_QUSE_WIDTH
+ EMC_IBDLY
+ EMC_EINPUT
+ EMC_EINPUT_DURATION
+ EMC_PUTERM_EXTRA
+ EMC_PUTERM_WIDTH
+ EMC_PUTERM_ADJ
+ EMC_CDB_CNTL_1
+ EMC_CDB_CNTL_2
+ EMC_CDB_CNTL_3
+ EMC_QRST
+ EMC_QSAFE
+ EMC_RDV
+ EMC_RDV_MASK
+ EMC_REFRESH
+ EMC_BURST_REFRESH_NUM
+ EMC_PRE_REFRESH_REQ_CNT
+ EMC_PDEX2WR
+ EMC_PDEX2RD
+ EMC_PCHG2PDEN
+ EMC_ACT2PDEN
+ EMC_AR2PDEN
+ EMC_RW2PDEN
+ EMC_TXSR
+ EMC_TXSRDLL
+ EMC_TCKE
+ EMC_TCKESR
+ EMC_TPD
+ EMC_TFAW
+ EMC_TRPAB
+ EMC_TCLKSTABLE
+ EMC_TCLKSTOP
+ EMC_TREFBW
+ EMC_FBIO_CFG6
+ EMC_ODT_WRITE
+ EMC_ODT_READ
+ EMC_FBIO_CFG5
+ EMC_CFG_DIG_DLL
+ EMC_CFG_DIG_DLL_PERIOD
+ EMC_DLL_XFORM_DQS0
+ EMC_DLL_XFORM_DQS1
+ EMC_DLL_XFORM_DQS2
+ EMC_DLL_XFORM_DQS3
+ EMC_DLL_XFORM_DQS4
+ EMC_DLL_XFORM_DQS5
+ EMC_DLL_XFORM_DQS6
+ EMC_DLL_XFORM_DQS7
+ EMC_DLL_XFORM_DQS8
+ EMC_DLL_XFORM_DQS9
+ EMC_DLL_XFORM_DQS10
+ EMC_DLL_XFORM_DQS11
+ EMC_DLL_XFORM_DQS12
+ EMC_DLL_XFORM_DQS13
+ EMC_DLL_XFORM_DQS14
+ EMC_DLL_XFORM_DQS15
+ EMC_DLL_XFORM_QUSE0
+ EMC_DLL_XFORM_QUSE1
+ EMC_DLL_XFORM_QUSE2
+ EMC_DLL_XFORM_QUSE3
+ EMC_DLL_XFORM_QUSE4
+ EMC_DLL_XFORM_QUSE5
+ EMC_DLL_XFORM_QUSE6
+ EMC_DLL_XFORM_QUSE7
+ EMC_DLL_XFORM_ADDR0
+ EMC_DLL_XFORM_ADDR1
+ EMC_DLL_XFORM_ADDR2
+ EMC_DLL_XFORM_ADDR3
+ EMC_DLL_XFORM_ADDR4
+ EMC_DLL_XFORM_ADDR5
+ EMC_DLL_XFORM_QUSE8
+ EMC_DLL_XFORM_QUSE9
+ EMC_DLL_XFORM_QUSE10
+ EMC_DLL_XFORM_QUSE11
+ EMC_DLL_XFORM_QUSE12
+ EMC_DLL_XFORM_QUSE13
+ EMC_DLL_XFORM_QUSE14
+ EMC_DLL_XFORM_QUSE15
+ EMC_DLI_TRIM_TXDQS0
+ EMC_DLI_TRIM_TXDQS1
+ EMC_DLI_TRIM_TXDQS2
+ EMC_DLI_TRIM_TXDQS3
+ EMC_DLI_TRIM_TXDQS4
+ EMC_DLI_TRIM_TXDQS5
+ EMC_DLI_TRIM_TXDQS6
+ EMC_DLI_TRIM_TXDQS7
+ EMC_DLI_TRIM_TXDQS8
+ EMC_DLI_TRIM_TXDQS9
+ EMC_DLI_TRIM_TXDQS10
+ EMC_DLI_TRIM_TXDQS11
+ EMC_DLI_TRIM_TXDQS12
+ EMC_DLI_TRIM_TXDQS13
+ EMC_DLI_TRIM_TXDQS14
+ EMC_DLI_TRIM_TXDQS15
+ EMC_DLL_XFORM_DQ0
+ EMC_DLL_XFORM_DQ1
+ EMC_DLL_XFORM_DQ2
+ EMC_DLL_XFORM_DQ3
+ EMC_DLL_XFORM_DQ4
+ EMC_DLL_XFORM_DQ5
+ EMC_DLL_XFORM_DQ6
+ EMC_DLL_XFORM_DQ7
+ EMC_XM2CMDPADCTRL
+ EMC_XM2CMDPADCTRL4
+ EMC_XM2CMDPADCTRL5
+ EMC_XM2DQPADCTRL2
+ EMC_XM2DQPADCTRL3
+ EMC_XM2CLKPADCTRL
+ EMC_XM2CLKPADCTRL2
+ EMC_XM2COMPPADCTRL
+ EMC_XM2VTTGENPADCTRL
+ EMC_XM2VTTGENPADCTRL2
+ EMC_XM2VTTGENPADCTRL3
+ EMC_XM2DQSPADCTRL3
+ EMC_XM2DQSPADCTRL4
+ EMC_XM2DQSPADCTRL5
+ EMC_XM2DQSPADCTRL6
+ EMC_DSR_VTTGEN_DRV
+ EMC_TXDSRVTTGEN
+ EMC_FBIO_SPARE
+ EMC_ZCAL_WAIT_CNT
+ EMC_MRS_WAIT_CNT2
+ EMC_CTT
+ EMC_CTT_DURATION
+ EMC_CFG_PIPE
+ EMC_DYN_SELF_REF_CONTROL
+ EMC_QPOP
+
+Example SoC include file:
+
+/ {
+ emc@0,7001b000 {
+ compatible = "nvidia,tegra124-emc";
+ reg = <0x0 0x7001b000 0x0 0x1000>;
+
+ nvidia,memory-controller = <&mc>;
+ };
+};
+
+Example board file:
+
+/ {
+ emc@0,7001b000 {
+ emc-timings-3 {
+ nvidia,ram-code = <3>;
+
+ timing-12750000 {
+ clock-frequency = <12750000>;
+
+ nvidia,emc-zcal-cnt-long = <0x00000042>;
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-ctt-term-ctrl = <0x00000802>;
+ nvidia,emc-cfg = <0x73240000>;
+ nvidia,emc-cfg-2 = <0x000008c5>;
+ nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+ nvidia,emc-bgbias-ctl0 = <0x00000008>;
+ nvidia,emc-auto-cal-config = <0xa1430000>;
+ nvidia,emc-auto-cal-config2 = <0x00000000>;
+ nvidia,emc-auto-cal-config3 = <0x00000000>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200008>;
+ nvidia,emc-mode-4 = <0x00000000>;
+
+ nvidia,emc-configuration = <
+ 0x00000000 /* EMC_RC */
+ 0x00000003 /* EMC_RFC */
+ 0x00000000 /* EMC_RFC_SLR */
+ 0x00000000 /* EMC_RAS */
+ 0x00000000 /* EMC_RP */
+ 0x00000004 /* EMC_R2W */
+ 0x0000000a /* EMC_W2R */
+ 0x00000003 /* EMC_R2P */
+ 0x0000000b /* EMC_W2P */
+ 0x00000000 /* EMC_RD_RCD */
+ 0x00000000 /* EMC_WR_RCD */
+ 0x00000003 /* EMC_RRD */
+ 0x00000003 /* EMC_REXT */
+ 0x00000000 /* EMC_WEXT */
+ 0x00000006 /* EMC_WDV */
+ 0x00000006 /* EMC_WDV_MASK */
+ 0x00000006 /* EMC_QUSE */
+ 0x00000002 /* EMC_QUSE_WIDTH */
+ 0x00000000 /* EMC_IBDLY */
+ 0x00000005 /* EMC_EINPUT */
+ 0x00000005 /* EMC_EINPUT_DURATION */
+ 0x00010000 /* EMC_PUTERM_EXTRA */
+ 0x00000003 /* EMC_PUTERM_WIDTH */
+ 0x00000000 /* EMC_PUTERM_ADJ */
+ 0x00000000 /* EMC_CDB_CNTL_1 */
+ 0x00000000 /* EMC_CDB_CNTL_2 */
+ 0x00000000 /* EMC_CDB_CNTL_3 */
+ 0x00000004 /* EMC_QRST */
+ 0x0000000c /* EMC_QSAFE */
+ 0x0000000d /* EMC_RDV */
+ 0x0000000f /* EMC_RDV_MASK */
+ 0x00000060 /* EMC_REFRESH */
+ 0x00000000 /* EMC_BURST_REFRESH_NUM */
+ 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+ 0x00000002 /* EMC_PDEX2WR */
+ 0x00000002 /* EMC_PDEX2RD */
+ 0x00000001 /* EMC_PCHG2PDEN */
+ 0x00000000 /* EMC_ACT2PDEN */
+ 0x00000007 /* EMC_AR2PDEN */
+ 0x0000000f /* EMC_RW2PDEN */
+ 0x00000005 /* EMC_TXSR */
+ 0x00000005 /* EMC_TXSRDLL */
+ 0x00000004 /* EMC_TCKE */
+ 0x00000005 /* EMC_TCKESR */
+ 0x00000004 /* EMC_TPD */
+ 0x00000000 /* EMC_TFAW */
+ 0x00000000 /* EMC_TRPAB */
+ 0x00000005 /* EMC_TCLKSTABLE */
+ 0x00000005 /* EMC_TCLKSTOP */
+ 0x00000064 /* EMC_TREFBW */
+ 0x00000000 /* EMC_FBIO_CFG6 */
+ 0x00000000 /* EMC_ODT_WRITE */
+ 0x00000000 /* EMC_ODT_READ */
+ 0x106aa298 /* EMC_FBIO_CFG5 */
+ 0x002c00a0 /* EMC_CFG_DIG_DLL */
+ 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+ 0x00064000 /* EMC_DLL_XFORM_DQS0 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS1 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS2 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS3 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS4 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS5 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS6 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS7 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS8 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS9 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS10 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS11 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS12 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS13 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS14 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS15 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+ 0x10000280 /* EMC_XM2CMDPADCTRL */
+ 0x00000000 /* EMC_XM2CMDPADCTRL4 */
+ 0x00111111 /* EMC_XM2CMDPADCTRL5 */
+ 0x00000000 /* EMC_XM2DQPADCTRL2 */
+ 0x00000000 /* EMC_XM2DQPADCTRL3 */
+ 0x77ffc081 /* EMC_XM2CLKPADCTRL */
+ 0x00000e0e /* EMC_XM2CLKPADCTRL2 */
+ 0x81f1f108 /* EMC_XM2COMPPADCTRL */
+ 0x07070004 /* EMC_XM2VTTGENPADCTRL */
+ 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+ 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+ 0x51451400 /* EMC_XM2DQSPADCTRL3 */
+ 0x00514514 /* EMC_XM2DQSPADCTRL4 */
+ 0x00514514 /* EMC_XM2DQSPADCTRL5 */
+ 0x51451400 /* EMC_XM2DQSPADCTRL6 */
+ 0x0000003f /* EMC_DSR_VTTGEN_DRV */
+ 0x00000007 /* EMC_TXDSRVTTGEN */
+ 0x00000000 /* EMC_FBIO_SPARE */
+ 0x00000042 /* EMC_ZCAL_WAIT_CNT */
+ 0x000e000e /* EMC_MRS_WAIT_CNT2 */
+ 0x00000000 /* EMC_CTT */
+ 0x00000003 /* EMC_CTT_DURATION */
+ 0x0000f2f3 /* EMC_CFG_PIPE */
+ 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+ 0x0000000a /* EMC_QPOP */
+ >;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
new file mode 100644
index 000000000000..af9d6931a1a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mfd.txt
@@ -0,0 +1,41 @@
+Multi-Function Devices (MFD)
+
+These devices comprise a nexus for heterogeneous hardware blocks containing
+more than one non-unique yet varying hardware functionality.
+
+A typical MFD can be:
+
+- A mixed signal ASIC on an external bus, sometimes a PMIC (Power Management
+ Integrated Circuit) that is manufactured in a lower technology node (rough
+ silicon) that handles analog drivers for things like audio amplifiers, LED
+ drivers, level shifters, PHY (physical interfaces to things like USB or
+ ethernet), regulators etc.
+
+- A range of memory registers containing "miscellaneous system registers" also
+ known as a system controller "syscon" or any other memory range containing a
+ mix of unrelated hardware devices.
+
+Optional properties:
+
+- compatible : "simple-mfd" - this signifies that the operating system should
+ consider all subnodes of the MFD device as separate devices akin to how
+ "simple-bus" inidicates when to see subnodes as children for a simple
+ memory-mapped bus. For more complex devices, when the nexus driver has to
+ probe registers to figure out what child devices exist etc, this should not
+ be used. In the latter case the child devices will be determined by the
+ operating system.
+
+Example:
+
+foo@1000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x01000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "myled";
+ default-state = "on";
+ };
+};
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
index 47b205cc9cc7..4556359c5876 100644
--- a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -10,3 +10,5 @@ Required properties:
The second entry gives the physical address and length of the
registers indicating the strapping options.
+Optional properties:
+- nvidia,long-ram-code: If present, the RAM code is long (4 bit). If not, short (2 bit).
diff --git a/Documentation/devicetree/bindings/soc/sunxi/sram.txt b/Documentation/devicetree/bindings/soc/sunxi/sram.txt
new file mode 100644
index 000000000000..067698112f5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/sunxi/sram.txt
@@ -0,0 +1,72 @@
+Allwinnner SoC SRAM controllers
+-----------------------------------------------------
+
+The SRAM controller found on most Allwinner devices is represented by
+a regular node for the SRAM controller itself, with sub-nodes
+reprensenting the SRAM handled by the SRAM controller.
+
+Controller Node
+---------------
+
+Required properties:
+- compatible : "allwinner,sun4i-a10-sram-controller"
+- reg : sram controller register offset + length
+
+SRAM nodes
+----------
+
+Each SRAM is described using the mmio-sram bindings documented in
+Documentation/devicetree/bindings/misc/sram.txt
+
+Each SRAM will have SRAM sections that are going to be handled by the
+SRAM controller as subnodes. These sections are represented following
+once again the representation described in the mmio-sram binding.
+
+The valid sections compatible are:
+ - allwinner,sun4i-a10-sram-a3-a4
+ - allwinner,sun4i-a10-sram-d
+
+Devices using SRAM sections
+---------------------------
+
+Some devices need to request to the SRAM controller to map an SRAM for
+their exclusive use.
+
+The relationship between such a device and an SRAM section is
+expressed through the allwinner,sram property, that will take a
+phandle and an argument.
+
+This valid values for this argument are:
+ - 0: CPU
+ - 1: Device
+
+Example
+-------
+sram-controller@01c00000 {
+ compatible = "allwinner,sun4i-a10-sram-controller";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_a: sram@00000000 {
+ compatible = "mmio-sram";
+ reg = <0x00000000 0xc000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00000000 0xc000>;
+
+ emac_sram: sram-section@8000 {
+ compatible = "allwinner,sun4i-a10-sram-a3-a4";
+ reg = <0x8000 0x4000>;
+ status = "disabled";
+ };
+ };
+};
+
+emac: ethernet@01c0b000 {
+ compatible = "allwinner,sun4i-a10-emac";
+ ...
+
+ allwinner,sram = <&emac_sram 1>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index ff26c7ed8c41..1bc64cda819e 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -114,7 +114,7 @@
ranges;
syscon: syscon@10000000 {
- compatible = "arm,realview-pb1176-syscon", "syscon";
+ compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
led@08.0 {
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index da9adf8f69da..ef811de09908 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -84,7 +84,7 @@
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
- clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+ clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
clock-names = "io", "core";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -93,7 +93,7 @@
sdhci1: sdhci@ab0800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
- clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+ clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
clock-names = "io", "core";
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -103,7 +103,7 @@
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+ clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
clock-names = "io", "core";
pinctrl-0 = <&emmc_pmux>;
pinctrl-names = "default";
@@ -133,13 +133,13 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&chip CLKID_TWD>;
+ clocks = <&chip_clk CLKID_TWD>;
};
eth1: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
- clocks = <&chip CLKID_GETH1>;
+ clocks = <&chip_clk CLKID_GETH1>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@@ -162,7 +162,7 @@
eth0: ethernet@e50000 {
compatible = "marvell,pxa168-eth";
reg = <0xe50000 0x10000>;
- clocks = <&chip CLKID_GETH0>;
+ clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@@ -261,7 +261,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
interrupts = <8>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@@ -270,7 +270,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
interrupts = <9>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@@ -279,7 +279,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
interrupts = <10>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -288,7 +288,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
interrupts = <11>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -297,7 +297,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
interrupts = <12>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -306,7 +306,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
interrupts = <13>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -315,7 +315,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
interrupts = <14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -324,7 +324,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
interrupts = <15>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -343,7 +343,7 @@
compatible = "marvell,berlin2-ahci", "generic-ahci";
reg = <0xe90000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
@@ -363,7 +363,7 @@
sata_phy: phy@e900a0 {
compatible = "marvell,berlin2-sata-phy";
reg = <0xe900a0 0x200>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
#phy-cells = <1>;
@@ -379,16 +379,28 @@
};
chip: chip-control@ea0000 {
- compatible = "marvell,berlin2-chip-ctrl";
- #clock-cells = <1>;
- #reset-cells = <2>;
+ compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>;
- clocks = <&refclk>;
- clock-names = "refclk";
- emmc_pmux: emmc-pmux {
- groups = "G26";
- function = "emmc";
+ chip_clk: clock {
+ compatible = "marvell,berlin2-clk";
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+ };
+
+ soc_pinctrl: pin-controller {
+ compatible = "marvell,berlin2-soc-pinctrl";
+
+ emmc_pmux: emmc-pmux {
+ groups = "G26";
+ function = "emmc";
+ };
+ };
+
+ chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
};
};
@@ -470,22 +482,24 @@
};
sysctrl: system-controller@d000 {
- compatible = "marvell,berlin2-system-ctrl";
+ compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
- uart0_pmux: uart0-pmux {
- groups = "GSM4";
- function = "uart0";
- };
-
- uart1_pmux: uart1-pmux {
- groups = "GSM5";
- function = "uart1";
- };
-
- uart2_pmux: uart2-pmux {
- groups = "GSM3";
- function = "uart2";
+ sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2-system-pinctrl";
+ uart0_pmux: uart0-pmux {
+ groups = "GSM4";
+ function = "uart0";
+ };
+
+ uart1_pmux: uart1-pmux {
+ groups = "GSM5";
+ function = "uart1";
+ };
+ uart2_pmux: uart2-pmux {
+ groups = "GSM3";
+ function = "uart2";
+ };
};
};
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index cb2a97cb9579..900213d78a32 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -81,7 +81,7 @@
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
- clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+ clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
clock-names = "io", "core";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -105,14 +105,14 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&chip CLKID_TWD>;
+ clocks = <&chip_clk CLKID_TWD>;
};
usb_phy0: usb-phy@b74000 {
compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x178 23>;
+ resets = <&chip_rst 0x178 23>;
status = "disabled";
};
@@ -120,14 +120,14 @@
compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x178 24>;
+ resets = <&chip_rst 0x178 24>;
status = "disabled";
};
eth1: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
- clocks = <&chip CLKID_GETH1>;
+ clocks = <&chip_clk CLKID_GETH1>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@@ -145,7 +145,7 @@
eth0: ethernet@e50000 {
compatible = "marvell,pxa168-eth";
reg = <0xe50000 0x10000>;
- clocks = <&chip CLKID_GETH0>;
+ clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@@ -244,7 +244,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
interrupts = <8>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@@ -253,7 +253,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
interrupts = <9>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@@ -262,7 +262,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
interrupts = <10>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -271,7 +271,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
interrupts = <11>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -280,7 +280,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
interrupts = <12>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -289,7 +289,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
interrupts = <13>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -298,7 +298,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
interrupts = <14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -307,7 +307,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
interrupts = <15>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -323,16 +323,28 @@
};
chip: chip-control@ea0000 {
- compatible = "marvell,berlin2cd-chip-ctrl";
- #clock-cells = <1>;
- #reset-cells = <2>;
+ compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>;
- clocks = <&refclk>;
- clock-names = "refclk";
- uart0_pmux: uart0-pmux {
- groups = "G6";
- function = "uart0";
+ chip_clk: clock {
+ compatible = "marvell,berlin2-clk";
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+ };
+
+ soc_pinctrl: pin-controller {
+ compatible = "marvell,berlin2cd-soc-pinctrl";
+
+ uart0_pmux: uart0-pmux {
+ groups = "G6";
+ function = "uart0";
+ };
+ };
+
+ chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
};
};
@@ -340,7 +352,7 @@
compatible = "chipidea,usb2";
reg = <0xed0000 0x200>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB0>;
+ clocks = <&chip_clk CLKID_USB0>;
phys = <&usb_phy0>;
phy-names = "usb-phy";
status = "disabled";
@@ -350,7 +362,7 @@
compatible = "chipidea,usb2";
reg = <0xee0000 0x200>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB1>;
+ clocks = <&chip_clk CLKID_USB1>;
phys = <&usb_phy1>;
phy-names = "usb-phy";
status = "disabled";
@@ -417,8 +429,12 @@
};
sysctrl: system-controller@d000 {
- compatible = "marvell,berlin2cd-system-ctrl";
+ compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
+
+ sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2cd-system-pinctrl";
+ };
};
sic: interrupt-controller@e000 {
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 703ce384e0d7..63a48490e2f9 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -102,7 +102,7 @@
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
- clocks = <&chip CLKID_SDIO1XIN>;
+ clocks = <&chip_clk CLKID_SDIO1XIN>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -110,7 +110,7 @@
sdhci1: sdhci@ab0800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
- clocks = <&chip CLKID_SDIO1XIN>;
+ clocks = <&chip_clk CLKID_SDIO1XIN>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -119,7 +119,7 @@
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+ clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
clock-names = "io", "core";
status = "disabled";
};
@@ -140,7 +140,7 @@
local-timer@ad0600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
- clocks = <&chip CLKID_TWD>;
+ clocks = <&chip_clk CLKID_TWD>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
@@ -155,7 +155,7 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xa2f400 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 14>;
+ resets = <&chip_rst 0x104 14>;
status = "disabled";
};
@@ -163,7 +163,7 @@
compatible = "chipidea,usb2";
reg = <0xa30000 0x10000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB2>;
+ clocks = <&chip_clk CLKID_USB2>;
phys = <&usb_phy2>;
phy-names = "usb-phy";
status = "disabled";
@@ -173,7 +173,7 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 12>;
+ resets = <&chip_rst 0x104 12>;
status = "disabled";
};
@@ -181,14 +181,14 @@
compatible = "marvell,berlin2-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 13>;
+ resets = <&chip_rst 0x104 13>;
status = "disabled";
};
eth0: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
- clocks = <&chip CLKID_GETH0>;
+ clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@@ -295,7 +295,7 @@
reg = <0x1400 0x100>;
interrupt-parent = <&aic>;
interrupts = <4>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi0_pmux>;
pinctrl-names = "default";
status = "disabled";
@@ -308,7 +308,7 @@
reg = <0x1800 0x100>;
interrupt-parent = <&aic>;
interrupts = <5>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi1_pmux>;
pinctrl-names = "default";
status = "disabled";
@@ -317,7 +317,7 @@
timer0: timer@2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
interrupts = <8>;
};
@@ -325,14 +325,14 @@
timer1: timer@2c14 {
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
};
timer2: timer@2c28 {
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -340,7 +340,7 @@
timer3: timer@2c3c {
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -348,7 +348,7 @@
timer4: timer@2c50 {
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -356,7 +356,7 @@
timer5: timer@2c64 {
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -364,7 +364,7 @@
timer6: timer@2c78 {
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -372,7 +372,7 @@
timer7: timer@2c8c {
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -388,21 +388,33 @@
};
chip: chip-control@ea0000 {
- compatible = "marvell,berlin2q-chip-ctrl";
- #clock-cells = <1>;
- #reset-cells = <2>;
+ compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>, <0xdd0170 0x10>;
- clocks = <&refclk>;
- clock-names = "refclk";
- twsi0_pmux: twsi0-pmux {
- groups = "G6";
- function = "twsi0";
+ chip_clk: clock {
+ compatible = "marvell,berlin2q-clk";
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
};
- twsi1_pmux: twsi1-pmux {
- groups = "G7";
- function = "twsi1";
+ soc_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-soc-pinctrl";
+
+ twsi0_pmux: twsi0-pmux {
+ groups = "G6";
+ function = "twsi0";
+ };
+
+ twsi1_pmux: twsi1-pmux {
+ groups = "G7";
+ function = "twsi1";
+ };
+ };
+
+ chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
};
};
@@ -410,7 +422,7 @@
compatible = "marvell,berlin2q-ahci", "generic-ahci";
reg = <0xe90000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
@@ -430,7 +442,7 @@
sata_phy: phy@e900a0 {
compatible = "marvell,berlin2q-sata-phy";
reg = <0xe900a0 0x200>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
#phy-cells = <1>;
@@ -449,7 +461,7 @@
compatible = "chipidea,usb2";
reg = <0xed0000 0x10000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB0>;
+ clocks = <&chip_clk CLKID_USB0>;
phys = <&usb_phy0>;
phy-names = "usb-phy";
status = "disabled";
@@ -459,7 +471,7 @@
compatible = "chipidea,usb2";
reg = <0xee0000 0x10000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB1>;
+ clocks = <&chip_clk CLKID_USB1>;
phys = <&usb_phy1>;
phy-names = "usb-phy";
status = "disabled";
@@ -554,27 +566,37 @@
};
sysctrl: pin-controller@d000 {
- compatible = "marvell,berlin2q-system-ctrl";
+ compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
- uart0_pmux: uart0-pmux {
- groups = "GSM12";
- function = "uart0";
- };
+ sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-system-pinctrl";
- uart1_pmux: uart1-pmux {
- groups = "GSM14";
- function = "uart1";
- };
+ uart0_pmux: uart0-pmux {
+ groups = "GSM12";
+ function = "uart0";
+ };
+
+ uart1_pmux: uart1-pmux {
+ groups = "GSM14";
+ function = "uart1";
+ };
+
+ twsi2_pmux: twsi2-pmux {
+ groups = "GSM13";
+ function = "twsi2";
+ };
- twsi2_pmux: twsi2-pmux {
- groups = "GSM13";
- function = "twsi2";
+ twsi3_pmux: twsi3-pmux {
+ groups = "GSM14";
+ function = "twsi3";
+ };
};
- twsi3_pmux: twsi3-pmux {
- groups = "GSM14";
- function = "twsi3";
+ adc: adc {
+ compatible = "marvell,berlin2-adc";
+ interrupts = <12>, <14>;
+ interrupt-names = "adc", "tsen";
};
};
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 28e38f8c6b0f..3807d4f46ef7 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -6,7 +6,7 @@
/ {
core-module@10000000 {
- compatible = "arm,core-module-integrator", "syscon";
+ compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
/* Use core module LED to indicate CPU load */
@@ -95,7 +95,7 @@
syscon {
/* Debug registers mapped as syscon */
- compatible = "syscon";
+ compatible = "syscon", "simple-mfd";
reg = <0x1a000000 0x10>;
led@04.0 {
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 3e40a947f3ea..742d53a5f7f9 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -6,6 +6,7 @@ menuconfig ARCH_BERLIN
select DW_APB_ICTL
select DW_APB_TIMER_OF
select GENERIC_IRQ_CHIP
+ select MFD_SYSCON
select PINCTRL
if ARCH_BERLIN
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index fde0cfad09de..021e0f40f419 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -138,6 +138,74 @@
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
+ apbregs@010000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x010000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "vexpress:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "vexpress:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "vexpress:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "vexpress:3";
+ linux,default-trigger = "cpu1";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "vexpress:4";
+ linux,default-trigger = "cpu2";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "vexpress:5";
+ linux,default-trigger = "cpu3";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "vexpress:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "vexpress:7";
+ default-state = "off";
+ };
+ };
+
mmci@050000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 1415e7879019..0fb452b1d01a 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -139,6 +139,12 @@ CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_XGENE=y
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index a1d4af6df3f5..1a82f3a17681 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -7,21 +7,24 @@ menu "Bus devices"
config ARM_CCI
bool
+config ARM_CCI_PMU
+ bool
+ select ARM_CCI
+
config ARM_CCI400_COMMON
bool
select ARM_CCI
config ARM_CCI400_PMU
bool "ARM CCI400 PMU support"
- default y
- depends on ARM || ARM64
- depends on HW_PERF_EVENTS
+ depends on (ARM && CPU_V7) || ARM64
+ depends on PERF_EVENTS
select ARM_CCI400_COMMON
+ select ARM_CCI_PMU
help
- Support for PMU events monitoring on the ARM CCI cache coherent
- interconnect.
-
- If unsure, say Y
+ Support for PMU events monitoring on the ARM CCI-400 (cache coherent
+ interconnect). CCI-400 supports counting events related to the
+ connected slave/master interfaces.
config ARM_CCI400_PORT_CTRL
bool
@@ -31,6 +34,20 @@ config ARM_CCI400_PORT_CTRL
Low level power management driver for CCI400 cache coherent
interconnect for ARM platforms.
+config ARM_CCI500_PMU
+ bool "ARM CCI500 PMU support"
+ default y
+ depends on (ARM && CPU_V7) || ARM64
+ depends on PERF_EVENTS
+ select ARM_CCI_PMU
+ help
+ Support for PMU events monitoring on the ARM CCI-500 cache coherent
+ interconnect. CCI-500 provides 8 independent event counters, which
+ can count events pertaining to the slave/master interfaces as well
+ as the internal events to the CCI.
+
+ If unsure, say Y
+
config ARM_CCN
bool "ARM CCN driver support"
depends on ARM || ARM64
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index 5340604b23a4..577cc4bf6a9d 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -52,12 +52,15 @@ static const struct of_device_id arm_cci_matches[] = {
#ifdef CONFIG_ARM_CCI400_COMMON
{.compatible = "arm,cci-400", .data = CCI400_PORTS_DATA },
#endif
+#ifdef CONFIG_ARM_CCI500_PMU
+ { .compatible = "arm,cci-500", },
+#endif
{},
};
-#ifdef CONFIG_ARM_CCI400_PMU
+#ifdef CONFIG_ARM_CCI_PMU
-#define DRIVER_NAME "CCI-400"
+#define DRIVER_NAME "ARM-CCI"
#define DRIVER_NAME_PMU DRIVER_NAME " PMU"
#define CCI_PMCR 0x0100
@@ -77,20 +80,21 @@ static const struct of_device_id arm_cci_matches[] = {
#define CCI_PMU_OVRFLW_FLAG 1
-#define CCI_PMU_CNTR_BASE(idx) ((idx) * SZ_4K)
-
-#define CCI_PMU_CNTR_MASK ((1ULL << 32) -1)
+#define CCI_PMU_CNTR_SIZE(model) ((model)->cntr_size)
+#define CCI_PMU_CNTR_BASE(model, idx) ((idx) * CCI_PMU_CNTR_SIZE(model))
+#define CCI_PMU_CNTR_MASK ((1ULL << 32) -1)
+#define CCI_PMU_CNTR_LAST(cci_pmu) (cci_pmu->num_cntrs - 1)
-#define CCI_PMU_EVENT_MASK 0xffUL
-#define CCI_PMU_EVENT_SOURCE(event) ((event >> 5) & 0x7)
-#define CCI_PMU_EVENT_CODE(event) (event & 0x1f)
-
-#define CCI_PMU_MAX_HW_EVENTS 5 /* CCI PMU has 4 counters + 1 cycle counter */
+#define CCI_PMU_MAX_HW_CNTRS(model) \
+ ((model)->num_hw_cntrs + (model)->fixed_hw_cntrs)
/* Types of interfaces that can generate events */
enum {
CCI_IF_SLAVE,
CCI_IF_MASTER,
+#ifdef CONFIG_ARM_CCI500_PMU
+ CCI_IF_GLOBAL,
+#endif
CCI_IF_MAX,
};
@@ -100,14 +104,30 @@ struct event_range {
};
struct cci_pmu_hw_events {
- struct perf_event *events[CCI_PMU_MAX_HW_EVENTS];
- unsigned long used_mask[BITS_TO_LONGS(CCI_PMU_MAX_HW_EVENTS)];
+ struct perf_event **events;
+ unsigned long *used_mask;
raw_spinlock_t pmu_lock;
};
+struct cci_pmu;
+/*
+ * struct cci_pmu_model:
+ * @fixed_hw_cntrs - Number of fixed event counters
+ * @num_hw_cntrs - Maximum number of programmable event counters
+ * @cntr_size - Size of an event counter mapping
+ */
struct cci_pmu_model {
char *name;
+ u32 fixed_hw_cntrs;
+ u32 num_hw_cntrs;
+ u32 cntr_size;
+ u64 nformat_attrs;
+ u64 nevent_attrs;
+ struct dev_ext_attribute *format_attrs;
+ struct dev_ext_attribute *event_attrs;
struct event_range event_ranges[CCI_IF_MAX];
+ int (*validate_hw_event)(struct cci_pmu *, unsigned long);
+ int (*get_event_idx)(struct cci_pmu *, struct cci_pmu_hw_events *, unsigned long);
};
static struct cci_pmu_model cci_pmu_models[];
@@ -116,33 +136,59 @@ struct cci_pmu {
void __iomem *base;
struct pmu pmu;
int nr_irqs;
- int irqs[CCI_PMU_MAX_HW_EVENTS];
+ int *irqs;
unsigned long active_irqs;
const struct cci_pmu_model *model;
struct cci_pmu_hw_events hw_events;
struct platform_device *plat_device;
- int num_events;
+ int num_cntrs;
atomic_t active_events;
struct mutex reserve_mutex;
+ struct notifier_block cpu_nb;
cpumask_t cpus;
};
-static struct cci_pmu *pmu;
#define to_cci_pmu(c) (container_of(c, struct cci_pmu, pmu))
+enum cci_models {
+#ifdef CONFIG_ARM_CCI400_PMU
+ CCI400_R0,
+ CCI400_R1,
+#endif
+#ifdef CONFIG_ARM_CCI500_PMU
+ CCI500_R0,
+#endif
+ CCI_MODEL_MAX
+};
+
+static ssize_t cci_pmu_format_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t cci_pmu_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+#define CCI_EXT_ATTR_ENTRY(_name, _func, _config) \
+ { __ATTR(_name, S_IRUGO, _func, NULL), (void *)_config }
+
+#define CCI_FORMAT_EXT_ATTR_ENTRY(_name, _config) \
+ CCI_EXT_ATTR_ENTRY(_name, cci_pmu_format_show, (char *)_config)
+#define CCI_EVENT_EXT_ATTR_ENTRY(_name, _config) \
+ CCI_EXT_ATTR_ENTRY(_name, cci_pmu_event_show, (unsigned long)_config)
+
+/* CCI400 PMU Specific definitions */
+
+#ifdef CONFIG_ARM_CCI400_PMU
+
/* Port ids */
-#define CCI_PORT_S0 0
-#define CCI_PORT_S1 1
-#define CCI_PORT_S2 2
-#define CCI_PORT_S3 3
-#define CCI_PORT_S4 4
-#define CCI_PORT_M0 5
-#define CCI_PORT_M1 6
-#define CCI_PORT_M2 7
-
-#define CCI_REV_R0 0
-#define CCI_REV_R1 1
-#define CCI_REV_R1_PX 5
+#define CCI400_PORT_S0 0
+#define CCI400_PORT_S1 1
+#define CCI400_PORT_S2 2
+#define CCI400_PORT_S3 3
+#define CCI400_PORT_S4 4
+#define CCI400_PORT_M0 5
+#define CCI400_PORT_M1 6
+#define CCI400_PORT_M2 7
+
+#define CCI400_R1_PX 5
/*
* Instead of an event id to monitor CCI cycles, a dedicated counter is
@@ -150,12 +196,11 @@ static struct cci_pmu *pmu;
* make use of this event in hardware.
*/
enum cci400_perf_events {
- CCI_PMU_CYCLES = 0xff
+ CCI400_PMU_CYCLES = 0xff
};
-#define CCI_PMU_CYCLE_CNTR_IDX 0
-#define CCI_PMU_CNTR0_IDX 1
-#define CCI_PMU_CNTR_LAST(cci_pmu) (CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1)
+#define CCI400_PMU_CYCLE_CNTR_IDX 0
+#define CCI400_PMU_CNTR0_IDX 1
/*
* CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8
@@ -169,37 +214,173 @@ enum cci400_perf_events {
* the different revisions and are used to validate the event to be monitored.
*/
-#define CCI_REV_R0_SLAVE_PORT_MIN_EV 0x00
-#define CCI_REV_R0_SLAVE_PORT_MAX_EV 0x13
-#define CCI_REV_R0_MASTER_PORT_MIN_EV 0x14
-#define CCI_REV_R0_MASTER_PORT_MAX_EV 0x1a
+#define CCI400_PMU_EVENT_MASK 0xffUL
+#define CCI400_PMU_EVENT_SOURCE_SHIFT 5
+#define CCI400_PMU_EVENT_SOURCE_MASK 0x7
+#define CCI400_PMU_EVENT_CODE_SHIFT 0
+#define CCI400_PMU_EVENT_CODE_MASK 0x1f
+#define CCI400_PMU_EVENT_SOURCE(event) \
+ ((event >> CCI400_PMU_EVENT_SOURCE_SHIFT) & \
+ CCI400_PMU_EVENT_SOURCE_MASK)
+#define CCI400_PMU_EVENT_CODE(event) \
+ ((event >> CCI400_PMU_EVENT_CODE_SHIFT) & CCI400_PMU_EVENT_CODE_MASK)
+
+#define CCI400_R0_SLAVE_PORT_MIN_EV 0x00
+#define CCI400_R0_SLAVE_PORT_MAX_EV 0x13
+#define CCI400_R0_MASTER_PORT_MIN_EV 0x14
+#define CCI400_R0_MASTER_PORT_MAX_EV 0x1a
+
+#define CCI400_R1_SLAVE_PORT_MIN_EV 0x00
+#define CCI400_R1_SLAVE_PORT_MAX_EV 0x14
+#define CCI400_R1_MASTER_PORT_MIN_EV 0x00
+#define CCI400_R1_MASTER_PORT_MAX_EV 0x11
+
+#define CCI400_CYCLE_EVENT_EXT_ATTR_ENTRY(_name, _config) \
+ CCI_EXT_ATTR_ENTRY(_name, cci400_pmu_cycle_event_show, \
+ (unsigned long)_config)
+
+static ssize_t cci400_pmu_cycle_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static struct dev_ext_attribute cci400_pmu_format_attrs[] = {
+ CCI_FORMAT_EXT_ATTR_ENTRY(event, "config:0-4"),
+ CCI_FORMAT_EXT_ATTR_ENTRY(source, "config:5-7"),
+};
+
+static struct dev_ext_attribute cci400_r0_pmu_event_attrs[] = {
+ /* Slave events */
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_any, 0x0),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_device, 0x01),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_normal_or_nonshareable, 0x2),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_inner_or_outershareable, 0x3),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_cache_maintenance, 0x4),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_mem_barrier, 0x5),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_sync_barrier, 0x6),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_dvm_msg, 0x7),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_dvm_msg_sync, 0x8),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_stall_tt_full, 0x9),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_data_last_hs_snoop, 0xA),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_data_stall_rvalids_h_rready_l, 0xB),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_any, 0xC),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_device, 0xD),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_normal_or_nonshareable, 0xE),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_inner_or_outershare_wback_wclean, 0xF),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_write_unique, 0x10),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_write_line_unique, 0x11),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_evict, 0x12),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_stall_tt_full, 0x13),
+ /* Master events */
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_retry_speculative_fetch, 0x14),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_addr_hazard, 0x15),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_id_hazard, 0x16),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_tt_full, 0x17),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_barrier_hazard, 0x18),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_barrier_hazard, 0x19),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_tt_full, 0x1A),
+ /* Special event for cycles counter */
+ CCI400_CYCLE_EVENT_EXT_ATTR_ENTRY(cycles, 0xff),
+};
+
+static struct dev_ext_attribute cci400_r1_pmu_event_attrs[] = {
+ /* Slave events */
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_any, 0x0),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_device, 0x01),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_normal_or_nonshareable, 0x2),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_inner_or_outershareable, 0x3),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_cache_maintenance, 0x4),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_mem_barrier, 0x5),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_sync_barrier, 0x6),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_dvm_msg, 0x7),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_dvm_msg_sync, 0x8),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_stall_tt_full, 0x9),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_data_last_hs_snoop, 0xA),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_data_stall_rvalids_h_rready_l, 0xB),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_any, 0xC),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_device, 0xD),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_normal_or_nonshareable, 0xE),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_inner_or_outershare_wback_wclean, 0xF),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_write_unique, 0x10),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_write_line_unique, 0x11),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_evict, 0x12),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_stall_tt_full, 0x13),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_stall_slave_id_hazard, 0x14),
+ /* Master events */
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_retry_speculative_fetch, 0x0),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_stall_cycle_addr_hazard, 0x1),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_master_id_hazard, 0x2),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_hi_prio_rtq_full, 0x3),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_barrier_hazard, 0x4),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_barrier_hazard, 0x5),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_wtq_full, 0x6),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_low_prio_rtq_full, 0x7),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_mid_prio_rtq_full, 0x8),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_qvn_vn0, 0x9),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_qvn_vn1, 0xA),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_qvn_vn2, 0xB),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_qvn_vn3, 0xC),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_qvn_vn0, 0xD),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_qvn_vn1, 0xE),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_qvn_vn2, 0xF),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_qvn_vn3, 0x10),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_unique_or_line_unique_addr_hazard, 0x11),
+ /* Special event for cycles counter */
+ CCI400_CYCLE_EVENT_EXT_ATTR_ENTRY(cycles, 0xff),
+};
-#define CCI_REV_R1_SLAVE_PORT_MIN_EV 0x00
-#define CCI_REV_R1_SLAVE_PORT_MAX_EV 0x14
-#define CCI_REV_R1_MASTER_PORT_MIN_EV 0x00
-#define CCI_REV_R1_MASTER_PORT_MAX_EV 0x11
+static ssize_t cci400_pmu_cycle_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+ return snprintf(buf, PAGE_SIZE, "config=0x%lx\n", (unsigned long)eattr->var);
+}
-static int pmu_validate_hw_event(unsigned long hw_event)
+static int cci400_get_event_idx(struct cci_pmu *cci_pmu,
+ struct cci_pmu_hw_events *hw,
+ unsigned long cci_event)
{
- u8 ev_source = CCI_PMU_EVENT_SOURCE(hw_event);
- u8 ev_code = CCI_PMU_EVENT_CODE(hw_event);
+ int idx;
+
+ /* cycles event idx is fixed */
+ if (cci_event == CCI400_PMU_CYCLES) {
+ if (test_and_set_bit(CCI400_PMU_CYCLE_CNTR_IDX, hw->used_mask))
+ return -EAGAIN;
+
+ return CCI400_PMU_CYCLE_CNTR_IDX;
+ }
+
+ for (idx = CCI400_PMU_CNTR0_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); ++idx)
+ if (!test_and_set_bit(idx, hw->used_mask))
+ return idx;
+
+ /* No counters available */
+ return -EAGAIN;
+}
+
+static int cci400_validate_hw_event(struct cci_pmu *cci_pmu, unsigned long hw_event)
+{
+ u8 ev_source = CCI400_PMU_EVENT_SOURCE(hw_event);
+ u8 ev_code = CCI400_PMU_EVENT_CODE(hw_event);
int if_type;
- if (hw_event & ~CCI_PMU_EVENT_MASK)
+ if (hw_event & ~CCI400_PMU_EVENT_MASK)
return -ENOENT;
+ if (hw_event == CCI400_PMU_CYCLES)
+ return hw_event;
+
switch (ev_source) {
- case CCI_PORT_S0:
- case CCI_PORT_S1:
- case CCI_PORT_S2:
- case CCI_PORT_S3:
- case CCI_PORT_S4:
+ case CCI400_PORT_S0:
+ case CCI400_PORT_S1:
+ case CCI400_PORT_S2:
+ case CCI400_PORT_S3:
+ case CCI400_PORT_S4:
/* Slave Interface */
if_type = CCI_IF_SLAVE;
break;
- case CCI_PORT_M0:
- case CCI_PORT_M1:
- case CCI_PORT_M2:
+ case CCI400_PORT_M0:
+ case CCI400_PORT_M1:
+ case CCI400_PORT_M2:
/* Master Interface */
if_type = CCI_IF_MASTER;
break;
@@ -207,87 +388,291 @@ static int pmu_validate_hw_event(unsigned long hw_event)
return -ENOENT;
}
- if (ev_code >= pmu->model->event_ranges[if_type].min &&
- ev_code <= pmu->model->event_ranges[if_type].max)
+ if (ev_code >= cci_pmu->model->event_ranges[if_type].min &&
+ ev_code <= cci_pmu->model->event_ranges[if_type].max)
return hw_event;
return -ENOENT;
}
-static int probe_cci_revision(void)
+static int probe_cci400_revision(void)
{
int rev;
rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
rev >>= CCI_PID2_REV_SHIFT;
- if (rev < CCI_REV_R1_PX)
- return CCI_REV_R0;
+ if (rev < CCI400_R1_PX)
+ return CCI400_R0;
else
- return CCI_REV_R1;
+ return CCI400_R1;
}
static const struct cci_pmu_model *probe_cci_model(struct platform_device *pdev)
{
if (platform_has_secure_cci_access())
- return &cci_pmu_models[probe_cci_revision()];
+ return &cci_pmu_models[probe_cci400_revision()];
return NULL;
}
+#else /* !CONFIG_ARM_CCI400_PMU */
+static inline struct cci_pmu_model *probe_cci_model(struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif /* CONFIG_ARM_CCI400_PMU */
+
+#ifdef CONFIG_ARM_CCI500_PMU
+
+/*
+ * CCI500 provides 8 independent event counters that can count
+ * any of the events available.
+ *
+ * CCI500 PMU event id is an 9-bit value made of two parts.
+ * bits [8:5] - Source for the event
+ * 0x0-0x6 - Slave interfaces
+ * 0x8-0xD - Master interfaces
+ * 0xf - Global Events
+ * 0x7,0xe - Reserved
+ *
+ * bits [4:0] - Event code (specific to type of interface)
+ */
+
+/* Port ids */
+#define CCI500_PORT_S0 0x0
+#define CCI500_PORT_S1 0x1
+#define CCI500_PORT_S2 0x2
+#define CCI500_PORT_S3 0x3
+#define CCI500_PORT_S4 0x4
+#define CCI500_PORT_S5 0x5
+#define CCI500_PORT_S6 0x6
+
+#define CCI500_PORT_M0 0x8
+#define CCI500_PORT_M1 0x9
+#define CCI500_PORT_M2 0xa
+#define CCI500_PORT_M3 0xb
+#define CCI500_PORT_M4 0xc
+#define CCI500_PORT_M5 0xd
+
+#define CCI500_PORT_GLOBAL 0xf
+
+#define CCI500_PMU_EVENT_MASK 0x1ffUL
+#define CCI500_PMU_EVENT_SOURCE_SHIFT 0x5
+#define CCI500_PMU_EVENT_SOURCE_MASK 0xf
+#define CCI500_PMU_EVENT_CODE_SHIFT 0x0
+#define CCI500_PMU_EVENT_CODE_MASK 0x1f
+
+#define CCI500_PMU_EVENT_SOURCE(event) \
+ ((event >> CCI500_PMU_EVENT_SOURCE_SHIFT) & CCI500_PMU_EVENT_SOURCE_MASK)
+#define CCI500_PMU_EVENT_CODE(event) \
+ ((event >> CCI500_PMU_EVENT_CODE_SHIFT) & CCI500_PMU_EVENT_CODE_MASK)
+
+#define CCI500_SLAVE_PORT_MIN_EV 0x00
+#define CCI500_SLAVE_PORT_MAX_EV 0x1f
+#define CCI500_MASTER_PORT_MIN_EV 0x00
+#define CCI500_MASTER_PORT_MAX_EV 0x06
+#define CCI500_GLOBAL_PORT_MIN_EV 0x00
+#define CCI500_GLOBAL_PORT_MAX_EV 0x0f
+
+
+#define CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(_name, _config) \
+ CCI_EXT_ATTR_ENTRY(_name, cci500_pmu_global_event_show, \
+ (unsigned long) _config)
+
+static ssize_t cci500_pmu_global_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static struct dev_ext_attribute cci500_pmu_format_attrs[] = {
+ CCI_FORMAT_EXT_ATTR_ENTRY(event, "config:0-4"),
+ CCI_FORMAT_EXT_ATTR_ENTRY(source, "config:5-8"),
+};
+
+static struct dev_ext_attribute cci500_pmu_event_attrs[] = {
+ /* Slave events */
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_arvalid, 0x0),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_dev, 0x1),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_nonshareable, 0x2),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_shareable_non_alloc, 0x3),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_shareable_alloc, 0x4),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_invalidate, 0x5),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_cache_maint, 0x6),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_dvm_msg, 0x7),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_rval, 0x8),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_rlast_snoop, 0x9),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_awalid, 0xA),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_dev, 0xB),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_non_shareable, 0xC),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_share_wb, 0xD),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_share_wlu, 0xE),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_share_wunique, 0xF),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_evict, 0x10),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_wrevict, 0x11),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_w_data_beat, 0x12),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_srq_acvalid, 0x13),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_srq_read, 0x14),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_srq_clean, 0x15),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_srq_data_transfer_low, 0x16),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_stall_arvalid, 0x17),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_data_stall, 0x18),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_stall, 0x19),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_w_data_stall, 0x1A),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_w_resp_stall, 0x1B),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_srq_stall, 0x1C),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_s_data_stall, 0x1D),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rq_stall_ot_limit, 0x1E),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_stall_arbit, 0x1F),
+
+ /* Master events */
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_r_data_beat_any, 0x0),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_w_data_beat_any, 0x1),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall, 0x2),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_r_data_stall, 0x3),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall, 0x4),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_w_data_stall, 0x5),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_w_resp_stall, 0x6),
+
+ /* Global events */
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_filter_bank_0_1, 0x0),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_filter_bank_2_3, 0x1),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_filter_bank_4_5, 0x2),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_filter_bank_6_7, 0x3),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_miss_filter_bank_0_1, 0x4),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_miss_filter_bank_2_3, 0x5),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_miss_filter_bank_4_5, 0x6),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_miss_filter_bank_6_7, 0x7),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_back_invalidation, 0x8),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_stall_alloc_busy, 0x9),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_stall_tt_full, 0xA),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_wrq, 0xB),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_cd_hs, 0xC),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_rq_stall_addr_hazard, 0xD),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snopp_rq_stall_tt_full, 0xE),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_tzmp1_prot, 0xF),
+};
+
+static ssize_t cci500_pmu_global_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+ /* Global events have single fixed source code */
+ return snprintf(buf, PAGE_SIZE, "event=0x%lx,source=0x%x\n",
+ (unsigned long)eattr->var, CCI500_PORT_GLOBAL);
+}
+
+static int cci500_validate_hw_event(struct cci_pmu *cci_pmu,
+ unsigned long hw_event)
+{
+ u32 ev_source = CCI500_PMU_EVENT_SOURCE(hw_event);
+ u32 ev_code = CCI500_PMU_EVENT_CODE(hw_event);
+ int if_type;
+
+ if (hw_event & ~CCI500_PMU_EVENT_MASK)
+ return -ENOENT;
+
+ switch (ev_source) {
+ case CCI500_PORT_S0:
+ case CCI500_PORT_S1:
+ case CCI500_PORT_S2:
+ case CCI500_PORT_S3:
+ case CCI500_PORT_S4:
+ case CCI500_PORT_S5:
+ case CCI500_PORT_S6:
+ if_type = CCI_IF_SLAVE;
+ break;
+ case CCI500_PORT_M0:
+ case CCI500_PORT_M1:
+ case CCI500_PORT_M2:
+ case CCI500_PORT_M3:
+ case CCI500_PORT_M4:
+ case CCI500_PORT_M5:
+ if_type = CCI_IF_MASTER;
+ break;
+ case CCI500_PORT_GLOBAL:
+ if_type = CCI_IF_GLOBAL;
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ if (ev_code >= cci_pmu->model->event_ranges[if_type].min &&
+ ev_code <= cci_pmu->model->event_ranges[if_type].max)
+ return hw_event;
+
+ return -ENOENT;
+}
+#endif /* CONFIG_ARM_CCI500_PMU */
+
+static ssize_t cci_pmu_format_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+ return snprintf(buf, PAGE_SIZE, "%s\n", (char *)eattr->var);
+}
+
+static ssize_t cci_pmu_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+ /* source parameter is mandatory for normal PMU events */
+ return snprintf(buf, PAGE_SIZE, "source=?,event=0x%lx\n",
+ (unsigned long)eattr->var);
+}
static int pmu_is_valid_counter(struct cci_pmu *cci_pmu, int idx)
{
- return CCI_PMU_CYCLE_CNTR_IDX <= idx &&
- idx <= CCI_PMU_CNTR_LAST(cci_pmu);
+ return 0 <= idx && idx <= CCI_PMU_CNTR_LAST(cci_pmu);
}
-static u32 pmu_read_register(int idx, unsigned int offset)
+static u32 pmu_read_register(struct cci_pmu *cci_pmu, int idx, unsigned int offset)
{
- return readl_relaxed(pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
+ return readl_relaxed(cci_pmu->base +
+ CCI_PMU_CNTR_BASE(cci_pmu->model, idx) + offset);
}
-static void pmu_write_register(u32 value, int idx, unsigned int offset)
+static void pmu_write_register(struct cci_pmu *cci_pmu, u32 value,
+ int idx, unsigned int offset)
{
- return writel_relaxed(value, pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
+ return writel_relaxed(value, cci_pmu->base +
+ CCI_PMU_CNTR_BASE(cci_pmu->model, idx) + offset);
}
-static void pmu_disable_counter(int idx)
+static void pmu_disable_counter(struct cci_pmu *cci_pmu, int idx)
{
- pmu_write_register(0, idx, CCI_PMU_CNTR_CTRL);
+ pmu_write_register(cci_pmu, 0, idx, CCI_PMU_CNTR_CTRL);
}
-static void pmu_enable_counter(int idx)
+static void pmu_enable_counter(struct cci_pmu *cci_pmu, int idx)
{
- pmu_write_register(1, idx, CCI_PMU_CNTR_CTRL);
+ pmu_write_register(cci_pmu, 1, idx, CCI_PMU_CNTR_CTRL);
}
-static void pmu_set_event(int idx, unsigned long event)
+static void pmu_set_event(struct cci_pmu *cci_pmu, int idx, unsigned long event)
{
- pmu_write_register(event, idx, CCI_PMU_EVT_SEL);
+ pmu_write_register(cci_pmu, event, idx, CCI_PMU_EVT_SEL);
}
+/*
+ * Returns the number of programmable counters actually implemented
+ * by the cci
+ */
static u32 pmu_get_max_counters(void)
{
- u32 n_cnts = (readl_relaxed(cci_ctrl_base + CCI_PMCR) &
- CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
-
- /* add 1 for cycle counter */
- return n_cnts + 1;
+ return (readl_relaxed(cci_ctrl_base + CCI_PMCR) &
+ CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
}
static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *event)
{
struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
- struct hw_perf_event *hw_event = &event->hw;
- unsigned long cci_event = hw_event->config_base;
+ unsigned long cci_event = event->hw.config_base;
int idx;
- if (cci_event == CCI_PMU_CYCLES) {
- if (test_and_set_bit(CCI_PMU_CYCLE_CNTR_IDX, hw->used_mask))
- return -EAGAIN;
+ if (cci_pmu->model->get_event_idx)
+ return cci_pmu->model->get_event_idx(cci_pmu, hw, cci_event);
- return CCI_PMU_CYCLE_CNTR_IDX;
- }
-
- for (idx = CCI_PMU_CNTR0_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); ++idx)
+ /* Generic code to find an unused idx from the mask */
+ for(idx = 0; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++)
if (!test_and_set_bit(idx, hw->used_mask))
return idx;
@@ -297,18 +682,13 @@ static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *ev
static int pmu_map_event(struct perf_event *event)
{
- int mapping;
- unsigned long config = event->attr.config;
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
- if (event->attr.type < PERF_TYPE_MAX)
+ if (event->attr.type < PERF_TYPE_MAX ||
+ !cci_pmu->model->validate_hw_event)
return -ENOENT;
- if (config == CCI_PMU_CYCLES)
- mapping = config;
- else
- mapping = pmu_validate_hw_event(config);
-
- return mapping;
+ return cci_pmu->model->validate_hw_event(cci_pmu, event->attr.config);
}
static int pmu_request_irq(struct cci_pmu *cci_pmu, irq_handler_t handler)
@@ -319,7 +699,7 @@ static int pmu_request_irq(struct cci_pmu *cci_pmu, irq_handler_t handler)
if (unlikely(!pmu_device))
return -ENODEV;
- if (pmu->nr_irqs < 1) {
+ if (cci_pmu->nr_irqs < 1) {
dev_err(&pmu_device->dev, "no irqs for CCI PMUs defined\n");
return -ENODEV;
}
@@ -331,16 +711,16 @@ static int pmu_request_irq(struct cci_pmu *cci_pmu, irq_handler_t handler)
*
* This should allow handling of non-unique interrupt for the counters.
*/
- for (i = 0; i < pmu->nr_irqs; i++) {
- int err = request_irq(pmu->irqs[i], handler, IRQF_SHARED,
+ for (i = 0; i < cci_pmu->nr_irqs; i++) {
+ int err = request_irq(cci_pmu->irqs[i], handler, IRQF_SHARED,
"arm-cci-pmu", cci_pmu);
if (err) {
dev_err(&pmu_device->dev, "unable to request IRQ%d for ARM CCI PMU counters\n",
- pmu->irqs[i]);
+ cci_pmu->irqs[i]);
return err;
}
- set_bit(i, &pmu->active_irqs);
+ set_bit(i, &cci_pmu->active_irqs);
}
return 0;
@@ -350,11 +730,11 @@ static void pmu_free_irq(struct cci_pmu *cci_pmu)
{
int i;
- for (i = 0; i < pmu->nr_irqs; i++) {
- if (!test_and_clear_bit(i, &pmu->active_irqs))
+ for (i = 0; i < cci_pmu->nr_irqs; i++) {
+ if (!test_and_clear_bit(i, &cci_pmu->active_irqs))
continue;
- free_irq(pmu->irqs[i], cci_pmu);
+ free_irq(cci_pmu->irqs[i], cci_pmu);
}
}
@@ -369,7 +749,7 @@ static u32 pmu_read_counter(struct perf_event *event)
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
return 0;
}
- value = pmu_read_register(idx, CCI_PMU_CNTR);
+ value = pmu_read_register(cci_pmu, idx, CCI_PMU_CNTR);
return value;
}
@@ -383,7 +763,7 @@ static void pmu_write_counter(struct perf_event *event, u32 value)
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx)))
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
else
- pmu_write_register(value, idx, CCI_PMU_CNTR);
+ pmu_write_register(cci_pmu, value, idx, CCI_PMU_CNTR);
}
static u64 pmu_event_update(struct perf_event *event)
@@ -427,7 +807,7 @@ static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
{
unsigned long flags;
struct cci_pmu *cci_pmu = dev;
- struct cci_pmu_hw_events *events = &pmu->hw_events;
+ struct cci_pmu_hw_events *events = &cci_pmu->hw_events;
int idx, handled = IRQ_NONE;
raw_spin_lock_irqsave(&events->pmu_lock, flags);
@@ -436,7 +816,7 @@ static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
* This should work regardless of whether we have per-counter overflow
* interrupt or a combined overflow interrupt.
*/
- for (idx = CCI_PMU_CYCLE_CNTR_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++) {
+ for (idx = 0; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++) {
struct perf_event *event = events->events[idx];
struct hw_perf_event *hw_counter;
@@ -446,11 +826,12 @@ static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
hw_counter = &event->hw;
/* Did this counter overflow? */
- if (!(pmu_read_register(idx, CCI_PMU_OVRFLW) &
+ if (!(pmu_read_register(cci_pmu, idx, CCI_PMU_OVRFLW) &
CCI_PMU_OVRFLW_FLAG))
continue;
- pmu_write_register(CCI_PMU_OVRFLW_FLAG, idx, CCI_PMU_OVRFLW);
+ pmu_write_register(cci_pmu, CCI_PMU_OVRFLW_FLAG, idx,
+ CCI_PMU_OVRFLW);
pmu_event_update(event);
pmu_event_set_period(event);
@@ -492,7 +873,7 @@ static void cci_pmu_enable(struct pmu *pmu)
{
struct cci_pmu *cci_pmu = to_cci_pmu(pmu);
struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
- int enabled = bitmap_weight(hw_events->used_mask, cci_pmu->num_events);
+ int enabled = bitmap_weight(hw_events->used_mask, cci_pmu->num_cntrs);
unsigned long flags;
u32 val;
@@ -523,6 +904,16 @@ static void cci_pmu_disable(struct pmu *pmu)
raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
}
+/*
+ * Check if the idx represents a non-programmable counter.
+ * All the fixed event counters are mapped before the programmable
+ * counters.
+ */
+static bool pmu_fixed_hw_idx(struct cci_pmu *cci_pmu, int idx)
+{
+ return (idx >= 0) && (idx < cci_pmu->model->fixed_hw_cntrs);
+}
+
static void cci_pmu_start(struct perf_event *event, int pmu_flags)
{
struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
@@ -547,12 +938,12 @@ static void cci_pmu_start(struct perf_event *event, int pmu_flags)
raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
- /* Configure the event to count, unless you are counting cycles */
- if (idx != CCI_PMU_CYCLE_CNTR_IDX)
- pmu_set_event(idx, hwc->config_base);
+ /* Configure the counter unless you are counting a fixed event */
+ if (!pmu_fixed_hw_idx(cci_pmu, idx))
+ pmu_set_event(cci_pmu, idx, hwc->config_base);
pmu_event_set_period(event);
- pmu_enable_counter(idx);
+ pmu_enable_counter(cci_pmu, idx);
raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
}
@@ -575,7 +966,7 @@ static void cci_pmu_stop(struct perf_event *event, int pmu_flags)
* We always reprogram the counter, so ignore PERF_EF_UPDATE. See
* cci_pmu_start()
*/
- pmu_disable_counter(idx);
+ pmu_disable_counter(cci_pmu, idx);
pmu_event_update(event);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
@@ -655,13 +1046,16 @@ static int
validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
+ unsigned long mask[BITS_TO_LONGS(cci_pmu->num_cntrs)];
struct cci_pmu_hw_events fake_pmu = {
/*
* Initialise the fake PMU. We only need to populate the
* used_mask for the purposes of validation.
*/
- .used_mask = { 0 },
+ .used_mask = mask,
};
+ memset(mask, 0, BITS_TO_LONGS(cci_pmu->num_cntrs) * sizeof(unsigned long));
if (!validate_event(event->pmu, &fake_pmu, leader))
return -EINVAL;
@@ -779,20 +1173,27 @@ static int cci_pmu_event_init(struct perf_event *event)
return err;
}
-static ssize_t pmu_attr_cpumask_show(struct device *dev,
+static ssize_t pmu_cpumask_attr_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+ struct cci_pmu *cci_pmu = eattr->var;
+
int n = scnprintf(buf, PAGE_SIZE - 1, "%*pbl",
- cpumask_pr_args(&pmu->cpus));
+ cpumask_pr_args(&cci_pmu->cpus));
buf[n++] = '\n';
buf[n] = '\0';
return n;
}
-static DEVICE_ATTR(cpumask, S_IRUGO, pmu_attr_cpumask_show, NULL);
+static struct dev_ext_attribute pmu_cpumask_attr = {
+ __ATTR(cpumask, S_IRUGO, pmu_cpumask_attr_show, NULL),
+ NULL, /* Populated in cci_pmu_init */
+};
static struct attribute *pmu_attrs[] = {
- &dev_attr_cpumask.attr,
+ &pmu_cpumask_attr.attr.attr,
NULL,
};
@@ -800,14 +1201,78 @@ static struct attribute_group pmu_attr_group = {
.attrs = pmu_attrs,
};
+static struct attribute_group pmu_format_attr_group = {
+ .name = "format",
+ .attrs = NULL, /* Filled in cci_pmu_init_attrs */
+};
+
+static struct attribute_group pmu_event_attr_group = {
+ .name = "events",
+ .attrs = NULL, /* Filled in cci_pmu_init_attrs */
+};
+
static const struct attribute_group *pmu_attr_groups[] = {
&pmu_attr_group,
+ &pmu_format_attr_group,
+ &pmu_event_attr_group,
NULL
};
+static struct attribute **alloc_attrs(struct platform_device *pdev,
+ int n, struct dev_ext_attribute *source)
+{
+ int i;
+ struct attribute **attrs;
+
+ /* Alloc n + 1 (for terminating NULL) */
+ attrs = devm_kcalloc(&pdev->dev, n + 1, sizeof(struct attribute *),
+ GFP_KERNEL);
+ if (!attrs)
+ return attrs;
+ for(i = 0; i < n; i++)
+ attrs[i] = &source[i].attr.attr;
+ return attrs;
+}
+
+static int cci_pmu_init_attrs(struct cci_pmu *cci_pmu, struct platform_device *pdev)
+{
+ const struct cci_pmu_model *model = cci_pmu->model;
+ struct attribute **attrs;
+
+ /*
+ * All allocations below are managed, hence doesn't need to be
+ * free'd explicitly in case of an error.
+ */
+
+ if (model->nevent_attrs) {
+ attrs = alloc_attrs(pdev, model->nevent_attrs,
+ model->event_attrs);
+ if (!attrs)
+ return -ENOMEM;
+ pmu_event_attr_group.attrs = attrs;
+ }
+ if (model->nformat_attrs) {
+ attrs = alloc_attrs(pdev, model->nformat_attrs,
+ model->format_attrs);
+ if (!attrs)
+ return -ENOMEM;
+ pmu_format_attr_group.attrs = attrs;
+ }
+ pmu_cpumask_attr.var = cci_pmu;
+
+ return 0;
+}
+
static int cci_pmu_init(struct cci_pmu *cci_pmu, struct platform_device *pdev)
{
char *name = cci_pmu->model->name;
+ u32 num_cntrs;
+ int rc;
+
+ rc = cci_pmu_init_attrs(cci_pmu, pdev);
+ if (rc)
+ return rc;
+
cci_pmu->pmu = (struct pmu) {
.name = cci_pmu->model->name,
.task_ctx_nr = perf_invalid_context,
@@ -823,7 +1288,15 @@ static int cci_pmu_init(struct cci_pmu *cci_pmu, struct platform_device *pdev)
};
cci_pmu->plat_device = pdev;
- cci_pmu->num_events = pmu_get_max_counters();
+ num_cntrs = pmu_get_max_counters();
+ if (num_cntrs > cci_pmu->model->num_hw_cntrs) {
+ dev_warn(&pdev->dev,
+ "PMU implements more counters(%d) than supported by"
+ " the model(%d), truncated.",
+ num_cntrs, cci_pmu->model->num_hw_cntrs);
+ num_cntrs = cci_pmu->model->num_hw_cntrs;
+ }
+ cci_pmu->num_cntrs = num_cntrs + cci_pmu->model->fixed_hw_cntrs;
return perf_pmu_register(&cci_pmu->pmu, name, -1);
}
@@ -831,12 +1304,14 @@ static int cci_pmu_init(struct cci_pmu *cci_pmu, struct platform_device *pdev)
static int cci_pmu_cpu_notifier(struct notifier_block *self,
unsigned long action, void *hcpu)
{
+ struct cci_pmu *cci_pmu = container_of(self,
+ struct cci_pmu, cpu_nb);
unsigned int cpu = (long)hcpu;
unsigned int target;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_DOWN_PREPARE:
- if (!cpumask_test_and_clear_cpu(cpu, &pmu->cpus))
+ if (!cpumask_test_and_clear_cpu(cpu, &cci_pmu->cpus))
break;
target = cpumask_any_but(cpu_online_mask, cpu);
if (target < 0) // UP, last CPU
@@ -845,7 +1320,7 @@ static int cci_pmu_cpu_notifier(struct notifier_block *self,
* TODO: migrate context once core races on event->ctx have
* been fixed.
*/
- cpumask_set_cpu(target, &pmu->cpus);
+ cpumask_set_cpu(target, &cci_pmu->cpus);
default:
break;
}
@@ -853,57 +1328,103 @@ static int cci_pmu_cpu_notifier(struct notifier_block *self,
return NOTIFY_OK;
}
-static struct notifier_block cci_pmu_cpu_nb = {
- .notifier_call = cci_pmu_cpu_notifier,
- /*
- * to migrate uncore events, our notifier should be executed
- * before perf core's notifier.
- */
- .priority = CPU_PRI_PERF + 1,
-};
-
static struct cci_pmu_model cci_pmu_models[] = {
- [CCI_REV_R0] = {
+#ifdef CONFIG_ARM_CCI400_PMU
+ [CCI400_R0] = {
.name = "CCI_400",
+ .fixed_hw_cntrs = 1, /* Cycle counter */
+ .num_hw_cntrs = 4,
+ .cntr_size = SZ_4K,
+ .format_attrs = cci400_pmu_format_attrs,
+ .nformat_attrs = ARRAY_SIZE(cci400_pmu_format_attrs),
+ .event_attrs = cci400_r0_pmu_event_attrs,
+ .nevent_attrs = ARRAY_SIZE(cci400_r0_pmu_event_attrs),
.event_ranges = {
[CCI_IF_SLAVE] = {
- CCI_REV_R0_SLAVE_PORT_MIN_EV,
- CCI_REV_R0_SLAVE_PORT_MAX_EV,
+ CCI400_R0_SLAVE_PORT_MIN_EV,
+ CCI400_R0_SLAVE_PORT_MAX_EV,
},
[CCI_IF_MASTER] = {
- CCI_REV_R0_MASTER_PORT_MIN_EV,
- CCI_REV_R0_MASTER_PORT_MAX_EV,
+ CCI400_R0_MASTER_PORT_MIN_EV,
+ CCI400_R0_MASTER_PORT_MAX_EV,
},
},
+ .validate_hw_event = cci400_validate_hw_event,
+ .get_event_idx = cci400_get_event_idx,
},
- [CCI_REV_R1] = {
+ [CCI400_R1] = {
.name = "CCI_400_r1",
+ .fixed_hw_cntrs = 1, /* Cycle counter */
+ .num_hw_cntrs = 4,
+ .cntr_size = SZ_4K,
+ .format_attrs = cci400_pmu_format_attrs,
+ .nformat_attrs = ARRAY_SIZE(cci400_pmu_format_attrs),
+ .event_attrs = cci400_r1_pmu_event_attrs,
+ .nevent_attrs = ARRAY_SIZE(cci400_r1_pmu_event_attrs),
.event_ranges = {
[CCI_IF_SLAVE] = {
- CCI_REV_R1_SLAVE_PORT_MIN_EV,
- CCI_REV_R1_SLAVE_PORT_MAX_EV,
+ CCI400_R1_SLAVE_PORT_MIN_EV,
+ CCI400_R1_SLAVE_PORT_MAX_EV,
},
[CCI_IF_MASTER] = {
- CCI_REV_R1_MASTER_PORT_MIN_EV,
- CCI_REV_R1_MASTER_PORT_MAX_EV,
+ CCI400_R1_MASTER_PORT_MIN_EV,
+ CCI400_R1_MASTER_PORT_MAX_EV,
},
},
+ .validate_hw_event = cci400_validate_hw_event,
+ .get_event_idx = cci400_get_event_idx,
},
+#endif
+#ifdef CONFIG_ARM_CCI500_PMU
+ [CCI500_R0] = {
+ .name = "CCI_500",
+ .fixed_hw_cntrs = 0,
+ .num_hw_cntrs = 8,
+ .cntr_size = SZ_64K,
+ .format_attrs = cci500_pmu_format_attrs,
+ .nformat_attrs = ARRAY_SIZE(cci500_pmu_format_attrs),
+ .event_attrs = cci500_pmu_event_attrs,
+ .nevent_attrs = ARRAY_SIZE(cci500_pmu_event_attrs),
+ .event_ranges = {
+ [CCI_IF_SLAVE] = {
+ CCI500_SLAVE_PORT_MIN_EV,
+ CCI500_SLAVE_PORT_MAX_EV,
+ },
+ [CCI_IF_MASTER] = {
+ CCI500_MASTER_PORT_MIN_EV,
+ CCI500_MASTER_PORT_MAX_EV,
+ },
+ [CCI_IF_GLOBAL] = {
+ CCI500_GLOBAL_PORT_MIN_EV,
+ CCI500_GLOBAL_PORT_MAX_EV,
+ },
+ },
+ .validate_hw_event = cci500_validate_hw_event,
+ },
+#endif
};
static const struct of_device_id arm_cci_pmu_matches[] = {
+#ifdef CONFIG_ARM_CCI400_PMU
{
.compatible = "arm,cci-400-pmu",
.data = NULL,
},
{
.compatible = "arm,cci-400-pmu,r0",
- .data = &cci_pmu_models[CCI_REV_R0],
+ .data = &cci_pmu_models[CCI400_R0],
},
{
.compatible = "arm,cci-400-pmu,r1",
- .data = &cci_pmu_models[CCI_REV_R1],
+ .data = &cci_pmu_models[CCI400_R1],
+ },
+#endif
+#ifdef CONFIG_ARM_CCI500_PMU
+ {
+ .compatible = "arm,cci-500-pmu,r0",
+ .data = &cci_pmu_models[CCI500_R0],
},
+#endif
{},
};
@@ -932,68 +1453,114 @@ static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs)
return false;
}
-static int cci_pmu_probe(struct platform_device *pdev)
+static struct cci_pmu *cci_pmu_alloc(struct platform_device *pdev)
{
- struct resource *res;
- int i, ret, irq;
+ struct cci_pmu *cci_pmu;
const struct cci_pmu_model *model;
+ /*
+ * All allocations are devm_* hence we don't have to free
+ * them explicitly on an error, as it would end up in driver
+ * detach.
+ */
model = get_cci_model(pdev);
if (!model) {
dev_warn(&pdev->dev, "CCI PMU version not supported\n");
- return -ENODEV;
+ return ERR_PTR(-ENODEV);
}
- pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
- if (!pmu)
- return -ENOMEM;
+ cci_pmu = devm_kzalloc(&pdev->dev, sizeof(*cci_pmu), GFP_KERNEL);
+ if (!cci_pmu)
+ return ERR_PTR(-ENOMEM);
+
+ cci_pmu->model = model;
+ cci_pmu->irqs = devm_kcalloc(&pdev->dev, CCI_PMU_MAX_HW_CNTRS(model),
+ sizeof(*cci_pmu->irqs), GFP_KERNEL);
+ if (!cci_pmu->irqs)
+ return ERR_PTR(-ENOMEM);
+ cci_pmu->hw_events.events = devm_kcalloc(&pdev->dev,
+ CCI_PMU_MAX_HW_CNTRS(model),
+ sizeof(*cci_pmu->hw_events.events),
+ GFP_KERNEL);
+ if (!cci_pmu->hw_events.events)
+ return ERR_PTR(-ENOMEM);
+ cci_pmu->hw_events.used_mask = devm_kcalloc(&pdev->dev,
+ BITS_TO_LONGS(CCI_PMU_MAX_HW_CNTRS(model)),
+ sizeof(*cci_pmu->hw_events.used_mask),
+ GFP_KERNEL);
+ if (!cci_pmu->hw_events.used_mask)
+ return ERR_PTR(-ENOMEM);
+
+ return cci_pmu;
+}
+
+
+static int cci_pmu_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct cci_pmu *cci_pmu;
+ int i, ret, irq;
+
+ cci_pmu = cci_pmu_alloc(pdev);
+ if (IS_ERR(cci_pmu))
+ return PTR_ERR(cci_pmu);
- pmu->model = model;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pmu->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(pmu->base))
+ cci_pmu->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(cci_pmu->base))
return -ENOMEM;
/*
- * CCI PMU has 5 overflow signals - one per counter; but some may be tied
+ * CCI PMU has one overflow interrupt per counter; but some may be tied
* together to a common interrupt.
*/
- pmu->nr_irqs = 0;
- for (i = 0; i < CCI_PMU_MAX_HW_EVENTS; i++) {
+ cci_pmu->nr_irqs = 0;
+ for (i = 0; i < CCI_PMU_MAX_HW_CNTRS(cci_pmu->model); i++) {
irq = platform_get_irq(pdev, i);
if (irq < 0)
break;
- if (is_duplicate_irq(irq, pmu->irqs, pmu->nr_irqs))
+ if (is_duplicate_irq(irq, cci_pmu->irqs, cci_pmu->nr_irqs))
continue;
- pmu->irqs[pmu->nr_irqs++] = irq;
+ cci_pmu->irqs[cci_pmu->nr_irqs++] = irq;
}
/*
* Ensure that the device tree has as many interrupts as the number
* of counters.
*/
- if (i < CCI_PMU_MAX_HW_EVENTS) {
+ if (i < CCI_PMU_MAX_HW_CNTRS(cci_pmu->model)) {
dev_warn(&pdev->dev, "In-correct number of interrupts: %d, should be %d\n",
- i, CCI_PMU_MAX_HW_EVENTS);
+ i, CCI_PMU_MAX_HW_CNTRS(cci_pmu->model));
return -EINVAL;
}
- raw_spin_lock_init(&pmu->hw_events.pmu_lock);
- mutex_init(&pmu->reserve_mutex);
- atomic_set(&pmu->active_events, 0);
- cpumask_set_cpu(smp_processor_id(), &pmu->cpus);
+ raw_spin_lock_init(&cci_pmu->hw_events.pmu_lock);
+ mutex_init(&cci_pmu->reserve_mutex);
+ atomic_set(&cci_pmu->active_events, 0);
+ cpumask_set_cpu(smp_processor_id(), &cci_pmu->cpus);
+
+ cci_pmu->cpu_nb = (struct notifier_block) {
+ .notifier_call = cci_pmu_cpu_notifier,
+ /*
+ * to migrate uncore events, our notifier should be executed
+ * before perf core's notifier.
+ */
+ .priority = CPU_PRI_PERF + 1,
+ };
- ret = register_cpu_notifier(&cci_pmu_cpu_nb);
+ ret = register_cpu_notifier(&cci_pmu->cpu_nb);
if (ret)
return ret;
- ret = cci_pmu_init(pmu, pdev);
- if (ret)
+ ret = cci_pmu_init(cci_pmu, pdev);
+ if (ret) {
+ unregister_cpu_notifier(&cci_pmu->cpu_nb);
return ret;
+ }
- pr_info("ARM %s PMU driver probed", pmu->model->name);
+ pr_info("ARM %s PMU driver probed", cci_pmu->model->name);
return 0;
}
@@ -1032,14 +1599,14 @@ static int __init cci_platform_init(void)
return platform_driver_register(&cci_platform_driver);
}
-#else /* !CONFIG_ARM_CCI400_PMU */
+#else /* !CONFIG_ARM_CCI_PMU */
static int __init cci_platform_init(void)
{
return 0;
}
-#endif /* CONFIG_ARM_CCI400_PMU */
+#endif /* CONFIG_ARM_CCI_PMU */
#ifdef CONFIG_ARM_CCI400_PORT_CTRL
diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index aaa0f2a87118..7d9879e166cf 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -166,13 +166,17 @@ struct arm_ccn_dt {
struct hrtimer hrtimer;
+ cpumask_t cpu;
+ struct notifier_block cpu_nb;
+
struct pmu pmu;
};
struct arm_ccn {
struct device *dev;
void __iomem *base;
- unsigned irq_used:1;
+ unsigned int irq;
+
unsigned sbas_present:1;
unsigned sbsx_present:1;
@@ -212,7 +216,7 @@ static int arm_ccn_node_to_xp_port(int node)
static void arm_ccn_pmu_config_set(u64 *config, u32 node_xp, u32 type, u32 port)
{
- *config &= ~((0xff << 0) | (0xff << 8) | (0xff << 24));
+ *config &= ~((0xff << 0) | (0xff << 8) | (0x3 << 24));
*config |= (node_xp << 0) | (type << 8) | (port << 24);
}
@@ -336,6 +340,23 @@ static ssize_t arm_ccn_pmu_event_show(struct device *dev,
if (event->mask)
res += snprintf(buf + res, PAGE_SIZE - res, ",mask=0x%x",
event->mask);
+
+ /* Arguments required by an event */
+ switch (event->type) {
+ case CCN_TYPE_CYCLES:
+ break;
+ case CCN_TYPE_XP:
+ res += snprintf(buf + res, PAGE_SIZE - res,
+ ",xp=?,port=?,vc=?,dir=?");
+ if (event->event == CCN_EVENT_WATCHPOINT)
+ res += snprintf(buf + res, PAGE_SIZE - res,
+ ",cmp_l=?,cmp_h=?,mask=?");
+ break;
+ default:
+ res += snprintf(buf + res, PAGE_SIZE - res, ",node=?");
+ break;
+ }
+
res += snprintf(buf + res, PAGE_SIZE - res, "\n");
return res;
@@ -521,6 +542,25 @@ static struct attribute_group arm_ccn_pmu_cmp_mask_attr_group = {
.attrs = arm_ccn_pmu_cmp_mask_attrs,
};
+static ssize_t arm_ccn_pmu_cpumask_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev));
+
+ return cpumap_print_to_pagebuf(true, buf, &ccn->dt.cpu);
+}
+
+static struct device_attribute arm_ccn_pmu_cpumask_attr =
+ __ATTR(cpumask, S_IRUGO, arm_ccn_pmu_cpumask_show, NULL);
+
+static struct attribute *arm_ccn_pmu_cpumask_attrs[] = {
+ &arm_ccn_pmu_cpumask_attr.attr,
+ NULL,
+};
+
+static struct attribute_group arm_ccn_pmu_cpumask_attr_group = {
+ .attrs = arm_ccn_pmu_cpumask_attrs,
+};
/*
* Default poll period is 10ms, which is way over the top anyway,
@@ -542,6 +582,7 @@ static const struct attribute_group *arm_ccn_pmu_attr_groups[] = {
&arm_ccn_pmu_events_attr_group,
&arm_ccn_pmu_format_attr_group,
&arm_ccn_pmu_cmp_mask_attr_group,
+ &arm_ccn_pmu_cpumask_attr_group,
NULL
};
@@ -587,7 +628,65 @@ static int arm_ccn_pmu_type_eq(u32 a, u32 b)
return 0;
}
-static void arm_ccn_pmu_event_destroy(struct perf_event *event)
+static int arm_ccn_pmu_event_alloc(struct perf_event *event)
+{
+ struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
+ struct hw_perf_event *hw = &event->hw;
+ u32 node_xp, type, event_id;
+ struct arm_ccn_component *source;
+ int bit;
+
+ node_xp = CCN_CONFIG_NODE(event->attr.config);
+ type = CCN_CONFIG_TYPE(event->attr.config);
+ event_id = CCN_CONFIG_EVENT(event->attr.config);
+
+ /* Allocate the cycle counter */
+ if (type == CCN_TYPE_CYCLES) {
+ if (test_and_set_bit(CCN_IDX_PMU_CYCLE_COUNTER,
+ ccn->dt.pmu_counters_mask))
+ return -EAGAIN;
+
+ hw->idx = CCN_IDX_PMU_CYCLE_COUNTER;
+ ccn->dt.pmu_counters[CCN_IDX_PMU_CYCLE_COUNTER].event = event;
+
+ return 0;
+ }
+
+ /* Allocate an event counter */
+ hw->idx = arm_ccn_pmu_alloc_bit(ccn->dt.pmu_counters_mask,
+ CCN_NUM_PMU_EVENT_COUNTERS);
+ if (hw->idx < 0) {
+ dev_dbg(ccn->dev, "No more counters available!\n");
+ return -EAGAIN;
+ }
+
+ if (type == CCN_TYPE_XP)
+ source = &ccn->xp[node_xp];
+ else
+ source = &ccn->node[node_xp];
+ ccn->dt.pmu_counters[hw->idx].source = source;
+
+ /* Allocate an event source or a watchpoint */
+ if (type == CCN_TYPE_XP && event_id == CCN_EVENT_WATCHPOINT)
+ bit = arm_ccn_pmu_alloc_bit(source->xp.dt_cmp_mask,
+ CCN_NUM_XP_WATCHPOINTS);
+ else
+ bit = arm_ccn_pmu_alloc_bit(source->pmu_events_mask,
+ CCN_NUM_PMU_EVENTS);
+ if (bit < 0) {
+ dev_dbg(ccn->dev, "No more event sources/watchpoints on node/XP %d!\n",
+ node_xp);
+ clear_bit(hw->idx, ccn->dt.pmu_counters_mask);
+ return -EAGAIN;
+ }
+ hw->config_base = bit;
+
+ ccn->dt.pmu_counters[hw->idx].event = event;
+
+ return 0;
+}
+
+static void arm_ccn_pmu_event_release(struct perf_event *event)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
struct hw_perf_event *hw = &event->hw;
@@ -616,15 +715,14 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
struct arm_ccn *ccn;
struct hw_perf_event *hw = &event->hw;
u32 node_xp, type, event_id;
- int valid, bit;
- struct arm_ccn_component *source;
+ int valid;
int i;
+ struct perf_event *sibling;
if (event->attr.type != event->pmu->type)
return -ENOENT;
ccn = pmu_to_arm_ccn(event->pmu);
- event->destroy = arm_ccn_pmu_event_destroy;
if (hw->sample_period) {
dev_warn(ccn->dev, "Sampling not supported!\n");
@@ -642,6 +740,16 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
dev_warn(ccn->dev, "Can't provide per-task data!\n");
return -EOPNOTSUPP;
}
+ /*
+ * Many perf core operations (eg. events rotation) operate on a
+ * single CPU context. This is obvious for CPU PMUs, where one
+ * expects the same sets of events being observed on all CPUs,
+ * but can lead to issues for off-core PMUs, like CCN, where each
+ * event could be theoretically assigned to a different CPU. To
+ * mitigate this, we enforce CPU assignment to one, selected
+ * processor (the one described in the "cpumask" attribute).
+ */
+ event->cpu = cpumask_first(&ccn->dt.cpu);
node_xp = CCN_CONFIG_NODE(event->attr.config);
type = CCN_CONFIG_TYPE(event->attr.config);
@@ -711,48 +819,20 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
node_xp, type, port);
}
- /* Allocate the cycle counter */
- if (type == CCN_TYPE_CYCLES) {
- if (test_and_set_bit(CCN_IDX_PMU_CYCLE_COUNTER,
- ccn->dt.pmu_counters_mask))
- return -EAGAIN;
-
- hw->idx = CCN_IDX_PMU_CYCLE_COUNTER;
- ccn->dt.pmu_counters[CCN_IDX_PMU_CYCLE_COUNTER].event = event;
-
- return 0;
- }
-
- /* Allocate an event counter */
- hw->idx = arm_ccn_pmu_alloc_bit(ccn->dt.pmu_counters_mask,
- CCN_NUM_PMU_EVENT_COUNTERS);
- if (hw->idx < 0) {
- dev_warn(ccn->dev, "No more counters available!\n");
- return -EAGAIN;
- }
-
- if (type == CCN_TYPE_XP)
- source = &ccn->xp[node_xp];
- else
- source = &ccn->node[node_xp];
- ccn->dt.pmu_counters[hw->idx].source = source;
-
- /* Allocate an event source or a watchpoint */
- if (type == CCN_TYPE_XP && event_id == CCN_EVENT_WATCHPOINT)
- bit = arm_ccn_pmu_alloc_bit(source->xp.dt_cmp_mask,
- CCN_NUM_XP_WATCHPOINTS);
- else
- bit = arm_ccn_pmu_alloc_bit(source->pmu_events_mask,
- CCN_NUM_PMU_EVENTS);
- if (bit < 0) {
- dev_warn(ccn->dev, "No more event sources/watchpoints on node/XP %d!\n",
- node_xp);
- clear_bit(hw->idx, ccn->dt.pmu_counters_mask);
- return -EAGAIN;
- }
- hw->config_base = bit;
+ /*
+ * We must NOT create groups containing mixed PMUs, although software
+ * events are acceptable (for example to create a CCN group
+ * periodically read when a hrtimer aka cpu-clock leader triggers).
+ */
+ if (event->group_leader->pmu != event->pmu &&
+ !is_software_event(event->group_leader))
+ return -EINVAL;
- ccn->dt.pmu_counters[hw->idx].event = event;
+ list_for_each_entry(sibling, &event->group_leader->sibling_list,
+ group_entry)
+ if (sibling->pmu != event->pmu &&
+ !is_software_event(sibling))
+ return -EINVAL;
return 0;
}
@@ -835,9 +915,14 @@ static void arm_ccn_pmu_event_start(struct perf_event *event, int flags)
arm_ccn_pmu_read_counter(ccn, hw->idx));
hw->state = 0;
- if (!ccn->irq_used)
+ /*
+ * Pin the timer, so that the overflows are handled by the chosen
+ * event->cpu (this is the same one as presented in "cpumask"
+ * attribute).
+ */
+ if (!ccn->irq)
hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
- HRTIMER_MODE_REL);
+ HRTIMER_MODE_REL_PINNED);
/* Set the DT bus input, engaging the counter */
arm_ccn_pmu_xp_dt_config(event, 1);
@@ -852,7 +937,7 @@ static void arm_ccn_pmu_event_stop(struct perf_event *event, int flags)
/* Disable counting, setting the DT bus to pass-through mode */
arm_ccn_pmu_xp_dt_config(event, 0);
- if (!ccn->irq_used)
+ if (!ccn->irq)
hrtimer_cancel(&ccn->dt.hrtimer);
/* Let the DT bus drain */
@@ -1014,8 +1099,13 @@ static void arm_ccn_pmu_event_config(struct perf_event *event)
static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
{
+ int err;
struct hw_perf_event *hw = &event->hw;
+ err = arm_ccn_pmu_event_alloc(event);
+ if (err)
+ return err;
+
arm_ccn_pmu_event_config(event);
hw->state = PERF_HES_STOPPED;
@@ -1029,6 +1119,8 @@ static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
static void arm_ccn_pmu_event_del(struct perf_event *event, int flags)
{
arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE);
+
+ arm_ccn_pmu_event_release(event);
}
static void arm_ccn_pmu_event_read(struct perf_event *event)
@@ -1079,12 +1171,39 @@ static enum hrtimer_restart arm_ccn_pmu_timer_handler(struct hrtimer *hrtimer)
}
+static int arm_ccn_pmu_cpu_notifier(struct notifier_block *nb,
+ unsigned long action, void *hcpu)
+{
+ struct arm_ccn_dt *dt = container_of(nb, struct arm_ccn_dt, cpu_nb);
+ struct arm_ccn *ccn = container_of(dt, struct arm_ccn, dt);
+ unsigned int cpu = (long)hcpu; /* for (long) see kernel/cpu.c */
+ unsigned int target;
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_DOWN_PREPARE:
+ if (!cpumask_test_and_clear_cpu(cpu, &dt->cpu))
+ break;
+ target = cpumask_any_but(cpu_online_mask, cpu);
+ if (target < 0)
+ break;
+ perf_pmu_migrate_context(&dt->pmu, cpu, target);
+ cpumask_set_cpu(target, &dt->cpu);
+ WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
+ default:
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+
static DEFINE_IDA(arm_ccn_pmu_ida);
static int arm_ccn_pmu_init(struct arm_ccn *ccn)
{
int i;
char *name;
+ int err;
/* Initialize DT subsystem */
ccn->dt.base = ccn->base + CCN_REGION_SIZE;
@@ -1136,20 +1255,58 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
};
/* No overflow interrupt? Have to use a timer instead. */
- if (!ccn->irq_used) {
+ if (!ccn->irq) {
dev_info(ccn->dev, "No access to interrupts, using timer.\n");
hrtimer_init(&ccn->dt.hrtimer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
ccn->dt.hrtimer.function = arm_ccn_pmu_timer_handler;
}
- return perf_pmu_register(&ccn->dt.pmu, name, -1);
+ /* Pick one CPU which we will use to collect data from CCN... */
+ cpumask_set_cpu(smp_processor_id(), &ccn->dt.cpu);
+
+ /*
+ * ... and change the selection when it goes offline. Priority is
+ * picked to have a chance to migrate events before perf is notified.
+ */
+ ccn->dt.cpu_nb.notifier_call = arm_ccn_pmu_cpu_notifier;
+ ccn->dt.cpu_nb.priority = CPU_PRI_PERF + 1,
+ err = register_cpu_notifier(&ccn->dt.cpu_nb);
+ if (err)
+ goto error_cpu_notifier;
+
+ /* Also make sure that the overflow interrupt is handled by this CPU */
+ if (ccn->irq) {
+ err = irq_set_affinity(ccn->irq, &ccn->dt.cpu);
+ if (err) {
+ dev_err(ccn->dev, "Failed to set interrupt affinity!\n");
+ goto error_set_affinity;
+ }
+ }
+
+ err = perf_pmu_register(&ccn->dt.pmu, name, -1);
+ if (err)
+ goto error_pmu_register;
+
+ return 0;
+
+error_pmu_register:
+error_set_affinity:
+ unregister_cpu_notifier(&ccn->dt.cpu_nb);
+error_cpu_notifier:
+ ida_simple_remove(&arm_ccn_pmu_ida, ccn->dt.id);
+ for (i = 0; i < ccn->num_xps; i++)
+ writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
+ writel(0, ccn->dt.base + CCN_DT_PMCR);
+ return err;
}
static void arm_ccn_pmu_cleanup(struct arm_ccn *ccn)
{
int i;
+ irq_set_affinity(ccn->irq, cpu_possible_mask);
+ unregister_cpu_notifier(&ccn->dt.cpu_nb);
for (i = 0; i < ccn->num_xps; i++)
writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
writel(0, ccn->dt.base + CCN_DT_PMCR);
@@ -1285,6 +1442,7 @@ static int arm_ccn_probe(struct platform_device *pdev)
{
struct arm_ccn *ccn;
struct resource *res;
+ unsigned int irq;
int err;
ccn = devm_kzalloc(&pdev->dev, sizeof(*ccn), GFP_KERNEL);
@@ -1309,6 +1467,7 @@ static int arm_ccn_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res)
return -EINVAL;
+ irq = res->start;
/* Check if we can use the interrupt */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__DISABLE,
@@ -1318,13 +1477,12 @@ static int arm_ccn_probe(struct platform_device *pdev)
/* Can set 'disable' bits, so can acknowledge interrupts */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE,
ccn->base + CCN_MN_ERRINT_STATUS);
- err = devm_request_irq(ccn->dev, res->start,
- arm_ccn_irq_handler, 0, dev_name(ccn->dev),
- ccn);
+ err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0,
+ dev_name(ccn->dev), ccn);
if (err)
return err;
- ccn->irq_used = 1;
+ ccn->irq = irq;
}
diff --git a/drivers/clk/berlin/bg2.c b/drivers/clk/berlin/bg2.c
index 515fb133495c..73153fc45ee9 100644
--- a/drivers/clk/berlin/bg2.c
+++ b/drivers/clk/berlin/bg2.c
@@ -502,12 +502,13 @@ static const struct berlin2_gate_data bg2_gates[] __initconst = {
static void __init berlin2_clock_setup(struct device_node *np)
{
+ struct device_node *parent_np = of_get_parent(np);
const char *parent_names[9];
struct clk *clk;
u8 avpll_flags = 0;
int n;
- gbase = of_iomap(np, 0);
+ gbase = of_iomap(parent_np, 0);
if (!gbase)
return;
@@ -685,7 +686,5 @@ static void __init berlin2_clock_setup(struct device_node *np)
bg2_fail:
iounmap(gbase);
}
-CLK_OF_DECLARE(berlin2_clock, "marvell,berlin2-chip-ctrl",
- berlin2_clock_setup);
-CLK_OF_DECLARE(berlin2cd_clock, "marvell,berlin2cd-chip-ctrl",
+CLK_OF_DECLARE(berlin2_clk, "marvell,berlin2-clk",
berlin2_clock_setup);
diff --git a/drivers/clk/berlin/bg2q.c b/drivers/clk/berlin/bg2q.c
index 440ef81ab15c..221f40c2b850 100644
--- a/drivers/clk/berlin/bg2q.c
+++ b/drivers/clk/berlin/bg2q.c
@@ -290,18 +290,19 @@ static const struct berlin2_gate_data bg2q_gates[] __initconst = {
static void __init berlin2q_clock_setup(struct device_node *np)
{
+ struct device_node *parent_np = of_get_parent(np);
const char *parent_names[9];
struct clk *clk;
int n;
- gbase = of_iomap(np, 0);
+ gbase = of_iomap(parent_np, 0);
if (!gbase) {
pr_err("%s: Unable to map global base\n", np->full_name);
return;
}
/* BG2Q CPU PLL is not part of global registers */
- cpupll_base = of_iomap(np, 1);
+ cpupll_base = of_iomap(parent_np, 1);
if (!cpupll_base) {
pr_err("%s: Unable to map cpupll base\n", np->full_name);
iounmap(gbase);
@@ -384,5 +385,5 @@ bg2q_fail:
iounmap(cpupll_base);
iounmap(gbase);
}
-CLK_OF_DECLARE(berlin2q_clock, "marvell,berlin2q-chip-ctrl",
+CLK_OF_DECLARE(berlin2q_clk, "marvell,berlin2q-clk",
berlin2q_clock_setup);
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 3fdd3912709a..3001f1ae1062 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -12,7 +12,8 @@ obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
-CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+obj-$(CONFIG_QCOM_SCM) += qcom_scm-32.o
+CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
obj-$(CONFIG_EFI) += efi/
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
new file mode 100644
index 000000000000..1bd6f9c34331
--- /dev/null
+++ b/drivers/firmware/qcom_scm-32.c
@@ -0,0 +1,503 @@
+/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/qcom_scm.h>
+
+#include <asm/outercache.h>
+#include <asm/cacheflush.h>
+
+#include "qcom_scm.h"
+
+#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
+#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
+#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
+#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
+
+#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
+#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
+#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
+#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
+
+struct qcom_scm_entry {
+ int flag;
+ void *entry;
+};
+
+static struct qcom_scm_entry qcom_scm_wb[] = {
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
+};
+
+static DEFINE_MUTEX(qcom_scm_lock);
+
+/**
+ * struct qcom_scm_command - one SCM command buffer
+ * @len: total available memory for command and response
+ * @buf_offset: start of command buffer
+ * @resp_hdr_offset: start of response buffer
+ * @id: command to be executed
+ * @buf: buffer returned from qcom_scm_get_command_buffer()
+ *
+ * An SCM command is laid out in memory as follows:
+ *
+ * ------------------- <--- struct qcom_scm_command
+ * | command header |
+ * ------------------- <--- qcom_scm_get_command_buffer()
+ * | command buffer |
+ * ------------------- <--- struct qcom_scm_response and
+ * | response header | qcom_scm_command_to_response()
+ * ------------------- <--- qcom_scm_get_response_buffer()
+ * | response buffer |
+ * -------------------
+ *
+ * There can be arbitrary padding between the headers and buffers so
+ * you should always use the appropriate qcom_scm_get_*_buffer() routines
+ * to access the buffers in a safe manner.
+ */
+struct qcom_scm_command {
+ __le32 len;
+ __le32 buf_offset;
+ __le32 resp_hdr_offset;
+ __le32 id;
+ __le32 buf[0];
+};
+
+/**
+ * struct qcom_scm_response - one SCM response buffer
+ * @len: total available memory for response
+ * @buf_offset: start of response data relative to start of qcom_scm_response
+ * @is_complete: indicates if the command has finished processing
+ */
+struct qcom_scm_response {
+ __le32 len;
+ __le32 buf_offset;
+ __le32 is_complete;
+};
+
+/**
+ * alloc_qcom_scm_command() - Allocate an SCM command
+ * @cmd_size: size of the command buffer
+ * @resp_size: size of the response buffer
+ *
+ * Allocate an SCM command, including enough room for the command
+ * and response headers as well as the command and response buffers.
+ *
+ * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
+ */
+static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
+{
+ struct qcom_scm_command *cmd;
+ size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
+ resp_size;
+ u32 offset;
+
+ cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
+ if (cmd) {
+ cmd->len = cpu_to_le32(len);
+ offset = offsetof(struct qcom_scm_command, buf);
+ cmd->buf_offset = cpu_to_le32(offset);
+ cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
+ }
+ return cmd;
+}
+
+/**
+ * free_qcom_scm_command() - Free an SCM command
+ * @cmd: command to free
+ *
+ * Free an SCM command.
+ */
+static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
+{
+ kfree(cmd);
+}
+
+/**
+ * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
+ * @cmd: command
+ *
+ * Returns a pointer to a response for a command.
+ */
+static inline struct qcom_scm_response *qcom_scm_command_to_response(
+ const struct qcom_scm_command *cmd)
+{
+ return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
+}
+
+/**
+ * qcom_scm_get_command_buffer() - Get a pointer to a command buffer
+ * @cmd: command
+ *
+ * Returns a pointer to the command buffer of a command.
+ */
+static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
+{
+ return (void *)cmd->buf;
+}
+
+/**
+ * qcom_scm_get_response_buffer() - Get a pointer to a response buffer
+ * @rsp: response
+ *
+ * Returns a pointer to a response buffer of a response.
+ */
+static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
+{
+ return (void *)rsp + le32_to_cpu(rsp->buf_offset);
+}
+
+static int qcom_scm_remap_error(int err)
+{
+ pr_err("qcom_scm_call failed with error code %d\n", err);
+ switch (err) {
+ case QCOM_SCM_ERROR:
+ return -EIO;
+ case QCOM_SCM_EINVAL_ADDR:
+ case QCOM_SCM_EINVAL_ARG:
+ return -EINVAL;
+ case QCOM_SCM_EOPNOTSUPP:
+ return -EOPNOTSUPP;
+ case QCOM_SCM_ENOMEM:
+ return -ENOMEM;
+ }
+ return -EINVAL;
+}
+
+static u32 smc(u32 cmd_addr)
+{
+ int context_id;
+ register u32 r0 asm("r0") = 1;
+ register u32 r1 asm("r1") = (u32)&context_id;
+ register u32 r2 asm("r2") = cmd_addr;
+ do {
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ __asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0)
+ : "r" (r0), "r" (r1), "r" (r2)
+ : "r3");
+ } while (r0 == QCOM_SCM_INTERRUPTED);
+
+ return r0;
+}
+
+static int __qcom_scm_call(const struct qcom_scm_command *cmd)
+{
+ int ret;
+ u32 cmd_addr = virt_to_phys(cmd);
+
+ /*
+ * Flush the command buffer so that the secure world sees
+ * the correct data.
+ */
+ __cpuc_flush_dcache_area((void *)cmd, cmd->len);
+ outer_flush_range(cmd_addr, cmd_addr + cmd->len);
+
+ ret = smc(cmd_addr);
+ if (ret < 0)
+ ret = qcom_scm_remap_error(ret);
+
+ return ret;
+}
+
+static void qcom_scm_inv_range(unsigned long start, unsigned long end)
+{
+ u32 cacheline_size, ctr;
+
+ asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
+ cacheline_size = 4 << ((ctr >> 16) & 0xf);
+
+ start = round_down(start, cacheline_size);
+ end = round_up(end, cacheline_size);
+ outer_inv_range(start, end);
+ while (start < end) {
+ asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
+ : "memory");
+ start += cacheline_size;
+ }
+ dsb();
+ isb();
+}
+
+/**
+ * qcom_scm_call() - Send an SCM command
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @cmd_buf: command buffer
+ * @cmd_len: length of the command buffer
+ * @resp_buf: response buffer
+ * @resp_len: length of the response buffer
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ *
+ * A note on cache maintenance:
+ * Note that any buffers that are expected to be accessed by the secure world
+ * must be flushed before invoking qcom_scm_call and invalidated in the cache
+ * immediately after qcom_scm_call returns. Cache maintenance on the command
+ * and response buffers is taken care of by qcom_scm_call; however, callers are
+ * responsible for any other cached buffers passed over to the secure world.
+ */
+static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
+ size_t cmd_len, void *resp_buf, size_t resp_len)
+{
+ int ret;
+ struct qcom_scm_command *cmd;
+ struct qcom_scm_response *rsp;
+ unsigned long start, end;
+
+ cmd = alloc_qcom_scm_command(cmd_len, resp_len);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
+ if (cmd_buf)
+ memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+
+ mutex_lock(&qcom_scm_lock);
+ ret = __qcom_scm_call(cmd);
+ mutex_unlock(&qcom_scm_lock);
+ if (ret)
+ goto out;
+
+ rsp = qcom_scm_command_to_response(cmd);
+ start = (unsigned long)rsp;
+
+ do {
+ qcom_scm_inv_range(start, start + sizeof(*rsp));
+ } while (!rsp->is_complete);
+
+ end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
+ qcom_scm_inv_range(start, end);
+
+ if (resp_buf)
+ memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
+out:
+ free_qcom_scm_command(cmd);
+ return ret;
+}
+
+#define SCM_CLASS_REGISTER (0x2 << 8)
+#define SCM_MASK_IRQS BIT(5)
+#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
+ SCM_CLASS_REGISTER | \
+ SCM_MASK_IRQS | \
+ (n & 0xf))
+
+/**
+ * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @arg1: first argument
+ *
+ * This shall only be used with commands that are guaranteed to be
+ * uninterruptable, atomic and SMP safe.
+ */
+static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
+{
+ int context_id;
+
+ register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
+ register u32 r1 asm("r1") = (u32)&context_id;
+ register u32 r2 asm("r2") = arg1;
+
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ __asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0)
+ : "r" (r0), "r" (r1), "r" (r2)
+ : "r3");
+ return r0;
+}
+
+u32 qcom_scm_get_version(void)
+{
+ int context_id;
+ static u32 version = -1;
+ register u32 r0 asm("r0");
+ register u32 r1 asm("r1");
+
+ if (version != -1)
+ return version;
+
+ mutex_lock(&qcom_scm_lock);
+
+ r0 = 0x1 << 8;
+ r1 = (u32)&context_id;
+ do {
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r1")
+ __asmeq("%2", "r0")
+ __asmeq("%3", "r1")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0), "=r" (r1)
+ : "r" (r0), "r" (r1)
+ : "r2", "r3");
+ } while (r0 == QCOM_SCM_INTERRUPTED);
+
+ version = r1;
+ mutex_unlock(&qcom_scm_lock);
+
+ return version;
+}
+EXPORT_SYMBOL(qcom_scm_get_version);
+
+/*
+ * Set the cold/warm boot address for one of the CPU cores.
+ */
+static int qcom_scm_set_boot_addr(u32 addr, int flags)
+{
+ struct {
+ __le32 flags;
+ __le32 addr;
+ } cmd;
+
+ cmd.addr = cpu_to_le32(addr);
+ cmd.flags = cpu_to_le32(flags);
+ return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+ &cmd, sizeof(cmd), NULL, 0);
+}
+
+/**
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the cold boot address of the cpus. Any cpu outside the supported
+ * range would be removed from the cpu present mask.
+ */
+int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+{
+ int flags = 0;
+ int cpu;
+ int scm_cb_flags[] = {
+ QCOM_SCM_FLAG_COLDBOOT_CPU0,
+ QCOM_SCM_FLAG_COLDBOOT_CPU1,
+ QCOM_SCM_FLAG_COLDBOOT_CPU2,
+ QCOM_SCM_FLAG_COLDBOOT_CPU3,
+ };
+
+ if (!cpus || (cpus && cpumask_empty(cpus)))
+ return -EINVAL;
+
+ for_each_cpu(cpu, cpus) {
+ if (cpu < ARRAY_SIZE(scm_cb_flags))
+ flags |= scm_cb_flags[cpu];
+ else
+ set_cpu_present(cpu, false);
+ }
+
+ return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+}
+
+/**
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the Linux entry point for the SCM to transfer control to when coming
+ * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ */
+int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+{
+ int ret;
+ int flags = 0;
+ int cpu;
+
+ /*
+ * Reassign only if we are switching from hotplug entry point
+ * to cpuidle entry point or vice versa.
+ */
+ for_each_cpu(cpu, cpus) {
+ if (entry == qcom_scm_wb[cpu].entry)
+ continue;
+ flags |= qcom_scm_wb[cpu].flag;
+ }
+
+ /* No change in entry function */
+ if (!flags)
+ return 0;
+
+ ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+ if (!ret) {
+ for_each_cpu(cpu, cpus)
+ qcom_scm_wb[cpu].entry = entry;
+ }
+
+ return ret;
+}
+
+/**
+ * qcom_scm_cpu_power_down() - Power down the cpu
+ * @flags - Flags to flush cache
+ *
+ * This is an end point to power down cpu. If there was a pending interrupt,
+ * the control would return from this function, otherwise, the cpu jumps to the
+ * warm boot entry point set for this cpu upon reset.
+ */
+void __qcom_scm_cpu_power_down(u32 flags)
+{
+ qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
+ flags & QCOM_SCM_FLUSH_FLAG_MASK);
+}
+
+int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+{
+ int ret;
+ u32 svc_cmd = (svc_id << 10) | cmd_id;
+ u32 ret_val = 0;
+
+ ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
+ sizeof(svc_cmd), &ret_val, sizeof(ret_val));
+ if (ret)
+ return ret;
+
+ return ret_val;
+}
+
+int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+ if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+ return -ERANGE;
+
+ return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
+ req, req_cnt * sizeof(*req), resp, sizeof(*resp));
+}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 994b50fd997c..45c008d68891 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
@@ -16,393 +16,12 @@
* 02110-1301, USA.
*/
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/err.h>
+#include <linux/cpumask.h>
+#include <linux/export.h>
+#include <linux/types.h>
#include <linux/qcom_scm.h>
-#include <asm/outercache.h>
-#include <asm/cacheflush.h>
-
-
-#define QCOM_SCM_ENOMEM -5
-#define QCOM_SCM_EOPNOTSUPP -4
-#define QCOM_SCM_EINVAL_ADDR -3
-#define QCOM_SCM_EINVAL_ARG -2
-#define QCOM_SCM_ERROR -1
-#define QCOM_SCM_INTERRUPTED 1
-
-#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
-#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
-#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
-#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
-
-#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
-#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
-#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
-#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
-
-struct qcom_scm_entry {
- int flag;
- void *entry;
-};
-
-static struct qcom_scm_entry qcom_scm_wb[] = {
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
-};
-
-static DEFINE_MUTEX(qcom_scm_lock);
-
-/**
- * struct qcom_scm_command - one SCM command buffer
- * @len: total available memory for command and response
- * @buf_offset: start of command buffer
- * @resp_hdr_offset: start of response buffer
- * @id: command to be executed
- * @buf: buffer returned from qcom_scm_get_command_buffer()
- *
- * An SCM command is laid out in memory as follows:
- *
- * ------------------- <--- struct qcom_scm_command
- * | command header |
- * ------------------- <--- qcom_scm_get_command_buffer()
- * | command buffer |
- * ------------------- <--- struct qcom_scm_response and
- * | response header | qcom_scm_command_to_response()
- * ------------------- <--- qcom_scm_get_response_buffer()
- * | response buffer |
- * -------------------
- *
- * There can be arbitrary padding between the headers and buffers so
- * you should always use the appropriate qcom_scm_get_*_buffer() routines
- * to access the buffers in a safe manner.
- */
-struct qcom_scm_command {
- __le32 len;
- __le32 buf_offset;
- __le32 resp_hdr_offset;
- __le32 id;
- __le32 buf[0];
-};
-
-/**
- * struct qcom_scm_response - one SCM response buffer
- * @len: total available memory for response
- * @buf_offset: start of response data relative to start of qcom_scm_response
- * @is_complete: indicates if the command has finished processing
- */
-struct qcom_scm_response {
- __le32 len;
- __le32 buf_offset;
- __le32 is_complete;
-};
-
-/**
- * alloc_qcom_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
- */
-static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
-{
- struct qcom_scm_command *cmd;
- size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
- resp_size;
- u32 offset;
-
- cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
- if (cmd) {
- cmd->len = cpu_to_le32(len);
- offset = offsetof(struct qcom_scm_command, buf);
- cmd->buf_offset = cpu_to_le32(offset);
- cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
- }
- return cmd;
-}
-
-/**
- * free_qcom_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
-{
- kfree(cmd);
-}
-
-/**
- * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
- * @cmd: command
- *
- * Returns a pointer to a response for a command.
- */
-static inline struct qcom_scm_response *qcom_scm_command_to_response(
- const struct qcom_scm_command *cmd)
-{
- return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
-}
-
-/**
- * qcom_scm_get_command_buffer() - Get a pointer to a command buffer
- * @cmd: command
- *
- * Returns a pointer to the command buffer of a command.
- */
-static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
-{
- return (void *)cmd->buf;
-}
-
-/**
- * qcom_scm_get_response_buffer() - Get a pointer to a response buffer
- * @rsp: response
- *
- * Returns a pointer to a response buffer of a response.
- */
-static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
-{
- return (void *)rsp + le32_to_cpu(rsp->buf_offset);
-}
-
-static int qcom_scm_remap_error(int err)
-{
- pr_err("qcom_scm_call failed with error code %d\n", err);
- switch (err) {
- case QCOM_SCM_ERROR:
- return -EIO;
- case QCOM_SCM_EINVAL_ADDR:
- case QCOM_SCM_EINVAL_ARG:
- return -EINVAL;
- case QCOM_SCM_EOPNOTSUPP:
- return -EOPNOTSUPP;
- case QCOM_SCM_ENOMEM:
- return -ENOMEM;
- }
- return -EINVAL;
-}
-
-static u32 smc(u32 cmd_addr)
-{
- int context_id;
- register u32 r0 asm("r0") = 1;
- register u32 r1 asm("r1") = (u32)&context_id;
- register u32 r2 asm("r2") = cmd_addr;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r0")
- __asmeq("%2", "r1")
- __asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0)
- : "r" (r0), "r" (r1), "r" (r2)
- : "r3");
- } while (r0 == QCOM_SCM_INTERRUPTED);
-
- return r0;
-}
-
-static int __qcom_scm_call(const struct qcom_scm_command *cmd)
-{
- int ret;
- u32 cmd_addr = virt_to_phys(cmd);
-
- /*
- * Flush the command buffer so that the secure world sees
- * the correct data.
- */
- __cpuc_flush_dcache_area((void *)cmd, cmd->len);
- outer_flush_range(cmd_addr, cmd_addr + cmd->len);
-
- ret = smc(cmd_addr);
- if (ret < 0)
- ret = qcom_scm_remap_error(ret);
-
- return ret;
-}
-
-static void qcom_scm_inv_range(unsigned long start, unsigned long end)
-{
- u32 cacheline_size, ctr;
-
- asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
- cacheline_size = 4 << ((ctr >> 16) & 0xf);
-
- start = round_down(start, cacheline_size);
- end = round_up(end, cacheline_size);
- outer_inv_range(start, end);
- while (start < end) {
- asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
- : "memory");
- start += cacheline_size;
- }
- dsb();
- isb();
-}
-
-/**
- * qcom_scm_call() - Send an SCM command
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @cmd_buf: command buffer
- * @cmd_len: length of the command buffer
- * @resp_buf: response buffer
- * @resp_len: length of the response buffer
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- *
- * A note on cache maintenance:
- * Note that any buffers that are expected to be accessed by the secure world
- * must be flushed before invoking qcom_scm_call and invalidated in the cache
- * immediately after qcom_scm_call returns. Cache maintenance on the command
- * and response buffers is taken care of by qcom_scm_call; however, callers are
- * responsible for any other cached buffers passed over to the secure world.
- */
-static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
- size_t cmd_len, void *resp_buf, size_t resp_len)
-{
- int ret;
- struct qcom_scm_command *cmd;
- struct qcom_scm_response *rsp;
- unsigned long start, end;
-
- cmd = alloc_qcom_scm_command(cmd_len, resp_len);
- if (!cmd)
- return -ENOMEM;
-
- cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
- if (cmd_buf)
- memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
-
- mutex_lock(&qcom_scm_lock);
- ret = __qcom_scm_call(cmd);
- mutex_unlock(&qcom_scm_lock);
- if (ret)
- goto out;
-
- rsp = qcom_scm_command_to_response(cmd);
- start = (unsigned long)rsp;
-
- do {
- qcom_scm_inv_range(start, start + sizeof(*rsp));
- } while (!rsp->is_complete);
-
- end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
- qcom_scm_inv_range(start, end);
-
- if (resp_buf)
- memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
-out:
- free_qcom_scm_command(cmd);
- return ret;
-}
-
-#define SCM_CLASS_REGISTER (0x2 << 8)
-#define SCM_MASK_IRQS BIT(5)
-#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
- SCM_CLASS_REGISTER | \
- SCM_MASK_IRQS | \
- (n & 0xf))
-
-/**
- * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @arg1: first argument
- *
- * This shall only be used with commands that are guaranteed to be
- * uninterruptable, atomic and SMP safe.
- */
-static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
-{
- int context_id;
-
- register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
- register u32 r1 asm("r1") = (u32)&context_id;
- register u32 r2 asm("r2") = arg1;
-
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r0")
- __asmeq("%2", "r1")
- __asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0)
- : "r" (r0), "r" (r1), "r" (r2)
- : "r3");
- return r0;
-}
-
-u32 qcom_scm_get_version(void)
-{
- int context_id;
- static u32 version = -1;
- register u32 r0 asm("r0");
- register u32 r1 asm("r1");
-
- if (version != -1)
- return version;
-
- mutex_lock(&qcom_scm_lock);
-
- r0 = 0x1 << 8;
- r1 = (u32)&context_id;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r1")
- __asmeq("%2", "r0")
- __asmeq("%3", "r1")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0), "=r" (r1)
- : "r" (r0), "r" (r1)
- : "r2", "r3");
- } while (r0 == QCOM_SCM_INTERRUPTED);
-
- version = r1;
- mutex_unlock(&qcom_scm_lock);
-
- return version;
-}
-EXPORT_SYMBOL(qcom_scm_get_version);
-
-#define QCOM_SCM_SVC_BOOT 0x1
-#define QCOM_SCM_BOOT_ADDR 0x1
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-static int qcom_scm_set_boot_addr(u32 addr, int flags)
-{
- struct {
- __le32 flags;
- __le32 addr;
- } cmd;
-
- cmd.addr = cpu_to_le32(addr);
- cmd.flags = cpu_to_le32(flags);
- return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
- &cmd, sizeof(cmd), NULL, 0);
-}
+#include "qcom_scm.h"
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
@@ -414,26 +33,7 @@ static int qcom_scm_set_boot_addr(u32 addr, int flags)
*/
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
- int flags = 0;
- int cpu;
- int scm_cb_flags[] = {
- QCOM_SCM_FLAG_COLDBOOT_CPU0,
- QCOM_SCM_FLAG_COLDBOOT_CPU1,
- QCOM_SCM_FLAG_COLDBOOT_CPU2,
- QCOM_SCM_FLAG_COLDBOOT_CPU3,
- };
-
- if (!cpus || (cpus && cpumask_empty(cpus)))
- return -EINVAL;
-
- for_each_cpu(cpu, cpus) {
- if (cpu < ARRAY_SIZE(scm_cb_flags))
- flags |= scm_cb_flags[cpu];
- else
- set_cpu_present(cpu, false);
- }
-
- return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+ return __qcom_scm_set_cold_boot_addr(entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
@@ -447,37 +47,10 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
*/
int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
- int ret;
- int flags = 0;
- int cpu;
-
- /*
- * Reassign only if we are switching from hotplug entry point
- * to cpuidle entry point or vice versa.
- */
- for_each_cpu(cpu, cpus) {
- if (entry == qcom_scm_wb[cpu].entry)
- continue;
- flags |= qcom_scm_wb[cpu].flag;
- }
-
- /* No change in entry function */
- if (!flags)
- return 0;
-
- ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
- if (!ret) {
- for_each_cpu(cpu, cpus)
- qcom_scm_wb[cpu].entry = entry;
- }
-
- return ret;
+ return __qcom_scm_set_warm_boot_addr(entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
-#define QCOM_SCM_CMD_TERMINATE_PC 0x2
-#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
-
/**
* qcom_scm_cpu_power_down() - Power down the cpu
* @flags - Flags to flush cache
@@ -488,7 +61,36 @@ EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
*/
void qcom_scm_cpu_power_down(u32 flags)
{
- qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
- flags & QCOM_SCM_FLUSH_FLAG_MASK);
+ __qcom_scm_cpu_power_down(flags);
}
EXPORT_SYMBOL(qcom_scm_cpu_power_down);
+
+/**
+ * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
+ *
+ * Return true if HDCP is supported, false if not.
+ */
+bool qcom_scm_hdcp_available(void)
+{
+ int ret;
+
+ ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP,
+ QCOM_SCM_CMD_HDCP);
+
+ return (ret > 0) ? true : false;
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_available);
+
+/**
+ * qcom_scm_hdcp_req() - Send HDCP request.
+ * @req: HDCP request array
+ * @req_cnt: HDCP request array count
+ * @resp: response buffer passed to SCM
+ *
+ * Write HDCP register(s) through SCM.
+ */
+int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+ return __qcom_scm_hdcp_req(req, req_cnt, resp);
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_req);
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
new file mode 100644
index 000000000000..2cce75c08b99
--- /dev/null
+++ b/drivers/firmware/qcom_scm.h
@@ -0,0 +1,47 @@
+/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_SCM_INT_H
+#define __QCOM_SCM_INT_H
+
+#define QCOM_SCM_SVC_BOOT 0x1
+#define QCOM_SCM_BOOT_ADDR 0x1
+#define QCOM_SCM_BOOT_ADDR_MC 0x11
+
+#define QCOM_SCM_FLAG_HLOS 0x01
+#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
+#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
+extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
+
+#define QCOM_SCM_CMD_TERMINATE_PC 0x2
+#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
+#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10
+extern void __qcom_scm_cpu_power_down(u32 flags);
+
+#define QCOM_SCM_SVC_INFO 0x6
+#define QCOM_IS_CALL_AVAIL_CMD 0x1
+extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id);
+
+#define QCOM_SCM_SVC_HDCP 0x11
+#define QCOM_SCM_CMD_HDCP 0x01
+extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+ u32 *resp);
+
+/* common error codes */
+#define QCOM_SCM_ENOMEM -5
+#define QCOM_SCM_EOPNOTSUPP -4
+#define QCOM_SCM_EINVAL_ADDR -3
+#define QCOM_SCM_EINVAL_ARG -2
+#define QCOM_SCM_ERROR -1
+#define QCOM_SCM_INTERRUPTED 1
+
+#endif
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 40f37a2b4a8a..9fd2691efbe7 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -219,7 +219,7 @@ config TEGRA_IOMMU_SMMU
select IOMMU_API
help
This driver supports the IOMMU hardware (SMMU) found on NVIDIA Tegra
- SoCs (Tegra30 up to Tegra124).
+ SoCs (Tegra30 up to Tegra132).
config EXYNOS_IOMMU
bool "Exynos IOMMU Support"
diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index c845d99ecf6b..c1f2e521dc52 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -7,6 +7,7 @@
*/
#include <linux/bitops.h>
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/iommu.h>
#include <linux/kernel.h>
@@ -31,6 +32,8 @@ struct tegra_smmu {
struct mutex lock;
struct list_head list;
+
+ struct dentry *debugfs;
};
struct tegra_smmu_as {
@@ -673,6 +676,103 @@ static void tegra_smmu_ahb_enable(void)
}
}
+static int tegra_smmu_swgroups_show(struct seq_file *s, void *data)
+{
+ struct tegra_smmu *smmu = s->private;
+ unsigned int i;
+ u32 value;
+
+ seq_printf(s, "swgroup enabled ASID\n");
+ seq_printf(s, "------------------------\n");
+
+ for (i = 0; i < smmu->soc->num_swgroups; i++) {
+ const struct tegra_smmu_swgroup *group = &smmu->soc->swgroups[i];
+ const char *status;
+ unsigned int asid;
+
+ value = smmu_readl(smmu, group->reg);
+
+ if (value & SMMU_ASID_ENABLE)
+ status = "yes";
+ else
+ status = "no";
+
+ asid = value & SMMU_ASID_MASK;
+
+ seq_printf(s, "%-9s %-7s %#04x\n", group->name, status,
+ asid);
+ }
+
+ return 0;
+}
+
+static int tegra_smmu_swgroups_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, tegra_smmu_swgroups_show, inode->i_private);
+}
+
+static const struct file_operations tegra_smmu_swgroups_fops = {
+ .open = tegra_smmu_swgroups_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int tegra_smmu_clients_show(struct seq_file *s, void *data)
+{
+ struct tegra_smmu *smmu = s->private;
+ unsigned int i;
+ u32 value;
+
+ seq_printf(s, "client enabled\n");
+ seq_printf(s, "--------------------\n");
+
+ for (i = 0; i < smmu->soc->num_clients; i++) {
+ const struct tegra_mc_client *client = &smmu->soc->clients[i];
+ const char *status;
+
+ value = smmu_readl(smmu, client->smmu.reg);
+
+ if (value & BIT(client->smmu.bit))
+ status = "yes";
+ else
+ status = "no";
+
+ seq_printf(s, "%-12s %s\n", client->name, status);
+ }
+
+ return 0;
+}
+
+static int tegra_smmu_clients_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, tegra_smmu_clients_show, inode->i_private);
+}
+
+static const struct file_operations tegra_smmu_clients_fops = {
+ .open = tegra_smmu_clients_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void tegra_smmu_debugfs_init(struct tegra_smmu *smmu)
+{
+ smmu->debugfs = debugfs_create_dir("smmu", NULL);
+ if (!smmu->debugfs)
+ return;
+
+ debugfs_create_file("swgroups", S_IRUGO, smmu->debugfs, smmu,
+ &tegra_smmu_swgroups_fops);
+ debugfs_create_file("clients", S_IRUGO, smmu->debugfs, smmu,
+ &tegra_smmu_clients_fops);
+}
+
+static void tegra_smmu_debugfs_exit(struct tegra_smmu *smmu)
+{
+ debugfs_remove_recursive(smmu->debugfs);
+}
+
struct tegra_smmu *tegra_smmu_probe(struct device *dev,
const struct tegra_smmu_soc *soc,
struct tegra_mc *mc)
@@ -743,5 +843,14 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev,
if (err < 0)
return ERR_PTR(err);
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ tegra_smmu_debugfs_init(smmu);
+
return smmu;
}
+
+void tegra_smmu_remove(struct tegra_smmu *smmu)
+{
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ tegra_smmu_debugfs_exit(smmu);
+}
diff --git a/drivers/leds/leds-syscon.c b/drivers/leds/leds-syscon.c
index 6896e2d9ba58..d1660b039812 100644
--- a/drivers/leds/leds-syscon.c
+++ b/drivers/leds/leds-syscon.c
@@ -20,6 +20,7 @@
* MA 02111-1307 USA
*/
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
@@ -66,102 +67,101 @@ static void syscon_led_set(struct led_classdev *led_cdev,
dev_err(sled->cdev.dev, "error updating LED status\n");
}
-static int __init syscon_leds_spawn(struct device_node *np,
- struct device *dev,
- struct regmap *map)
+static int syscon_led_probe(struct platform_device *pdev)
{
- struct device_node *child;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device *parent;
+ struct regmap *map;
+ struct syscon_led *sled;
+ const char *state;
int ret;
- for_each_available_child_of_node(np, child) {
- struct syscon_led *sled;
- const char *state;
-
- /* Only check for register-bit-leds */
- if (of_property_match_string(child, "compatible",
- "register-bit-led") < 0)
- continue;
-
- sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
- if (!sled)
- return -ENOMEM;
-
- sled->map = map;
-
- if (of_property_read_u32(child, "offset", &sled->offset))
- return -EINVAL;
- if (of_property_read_u32(child, "mask", &sled->mask))
- return -EINVAL;
- sled->cdev.name =
- of_get_property(child, "label", NULL) ? : child->name;
- sled->cdev.default_trigger =
- of_get_property(child, "linux,default-trigger", NULL);
-
- state = of_get_property(child, "default-state", NULL);
- if (state) {
- if (!strcmp(state, "keep")) {
- u32 val;
-
- ret = regmap_read(map, sled->offset, &val);
- if (ret < 0)
- return ret;
- sled->state = !!(val & sled->mask);
- } else if (!strcmp(state, "on")) {
- sled->state = true;
- ret = regmap_update_bits(map, sled->offset,
- sled->mask,
- sled->mask);
- if (ret < 0)
- return ret;
- } else {
- sled->state = false;
- ret = regmap_update_bits(map, sled->offset,
- sled->mask, 0);
- if (ret < 0)
- return ret;
- }
+ parent = dev->parent;
+ if (!parent) {
+ dev_err(dev, "no parent for syscon LED\n");
+ return -ENODEV;
+ }
+ map = syscon_node_to_regmap(parent->of_node);
+ if (!map) {
+ dev_err(dev, "no regmap for syscon LED parent\n");
+ return -ENODEV;
+ }
+
+ sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
+ if (!sled)
+ return -ENOMEM;
+
+ sled->map = map;
+
+ if (of_property_read_u32(np, "offset", &sled->offset))
+ return -EINVAL;
+ if (of_property_read_u32(np, "mask", &sled->mask))
+ return -EINVAL;
+ sled->cdev.name =
+ of_get_property(np, "label", NULL) ? : np->name;
+ sled->cdev.default_trigger =
+ of_get_property(np, "linux,default-trigger", NULL);
+
+ state = of_get_property(np, "default-state", NULL);
+ if (state) {
+ if (!strcmp(state, "keep")) {
+ u32 val;
+
+ ret = regmap_read(map, sled->offset, &val);
+ if (ret < 0)
+ return ret;
+ sled->state = !!(val & sled->mask);
+ } else if (!strcmp(state, "on")) {
+ sled->state = true;
+ ret = regmap_update_bits(map, sled->offset,
+ sled->mask,
+ sled->mask);
+ if (ret < 0)
+ return ret;
+ } else {
+ sled->state = false;
+ ret = regmap_update_bits(map, sled->offset,
+ sled->mask, 0);
+ if (ret < 0)
+ return ret;
}
- sled->cdev.brightness_set = syscon_led_set;
+ }
+ sled->cdev.brightness_set = syscon_led_set;
- ret = led_classdev_register(dev, &sled->cdev);
- if (ret < 0)
- return ret;
+ ret = led_classdev_register(dev, &sled->cdev);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, sled);
+ dev_info(dev, "registered LED %s\n", sled->cdev.name);
- dev_info(dev, "registered LED %s\n", sled->cdev.name);
- }
return 0;
}
-static int __init syscon_leds_init(void)
+static int syscon_led_remove(struct platform_device *pdev)
{
- struct device_node *np;
-
- for_each_of_allnodes(np) {
- struct platform_device *pdev;
- struct regmap *map;
- int ret;
+ struct syscon_led *sled = platform_get_drvdata(pdev);
- if (!of_device_is_compatible(np, "syscon"))
- continue;
+ led_classdev_unregister(&sled->cdev);
+ /* Turn it off */
+ regmap_update_bits(sled->map, sled->offset, sled->mask, 0);
+ return 0;
+}
- map = syscon_node_to_regmap(np);
- if (IS_ERR(map)) {
- pr_err("error getting regmap for syscon LEDs\n");
- continue;
- }
+static const struct of_device_id of_syscon_leds_match[] = {
+ { .compatible = "register-bit-led", },
+ {},
+};
- /*
- * If the map is there, the device should be there, we allocate
- * memory on the syscon device's behalf here.
- */
- pdev = of_find_device_by_node(np);
- if (!pdev)
- return -ENODEV;
- ret = syscon_leds_spawn(np, &pdev->dev, map);
- if (ret)
- dev_err(&pdev->dev, "could not spawn syscon LEDs\n");
- }
+MODULE_DEVICE_TABLE(of, of_syscon_leds_match);
- return 0;
-}
-device_initcall(syscon_leds_init);
+static struct platform_driver syscon_led_driver = {
+ .probe = syscon_led_probe,
+ .remove = syscon_led_remove,
+ .driver = {
+ .name = "leds-syscon",
+ .of_match_table = of_syscon_leds_match,
+ },
+};
+module_platform_driver(syscon_led_driver);
diff --git a/drivers/memory/tegra/Kconfig b/drivers/memory/tegra/Kconfig
index 571087621827..6d74e499e18d 100644
--- a/drivers/memory/tegra/Kconfig
+++ b/drivers/memory/tegra/Kconfig
@@ -5,3 +5,13 @@ config TEGRA_MC
help
This driver supports the Memory Controller (MC) hardware found on
NVIDIA Tegra SoCs.
+
+config TEGRA124_EMC
+ bool "NVIDIA Tegra124 External Memory Controller driver"
+ default y
+ depends on TEGRA_MC && ARCH_TEGRA_124_SOC
+ help
+ This driver is for the External Memory Controller (EMC) found on
+ Tegra124 chips. The EMC controls the external DRAM on the board.
+ This driver is required to change memory timings / clock rate for
+ external memory.
diff --git a/drivers/memory/tegra/Makefile b/drivers/memory/tegra/Makefile
index 0d9f497b786c..6a0b9ac54f05 100644
--- a/drivers/memory/tegra/Makefile
+++ b/drivers/memory/tegra/Makefile
@@ -3,5 +3,8 @@ tegra-mc-y := mc.o
tegra-mc-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30.o
tegra-mc-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114.o
tegra-mc-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra124.o
obj-$(CONFIG_TEGRA_MC) += tegra-mc.o
+
+obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o
diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c
index fe3c44e7e1d1..c71ede67e6c8 100644
--- a/drivers/memory/tegra/mc.c
+++ b/drivers/memory/tegra/mc.c
@@ -13,6 +13,9 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/sort.h>
+
+#include <soc/tegra/fuse.h>
#include "mc.h"
@@ -48,6 +51,9 @@
#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK 0x1ff
#define MC_EMEM_ARB_MISC0 0xd8
+#define MC_EMEM_ADR_CFG 0x54
+#define MC_EMEM_ADR_CFG_EMEM_NUMDEV BIT(0)
+
static const struct of_device_id tegra_mc_of_match[] = {
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
{ .compatible = "nvidia,tegra30-mc", .data = &tegra30_mc_soc },
@@ -58,6 +64,9 @@ static const struct of_device_id tegra_mc_of_match[] = {
#ifdef CONFIG_ARCH_TEGRA_124_SOC
{ .compatible = "nvidia,tegra124-mc", .data = &tegra124_mc_soc },
#endif
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+ { .compatible = "nvidia,tegra132-mc", .data = &tegra132_mc_soc },
+#endif
{ }
};
MODULE_DEVICE_TABLE(of, tegra_mc_of_match);
@@ -91,6 +100,130 @@ static int tegra_mc_setup_latency_allowance(struct tegra_mc *mc)
return 0;
}
+void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate)
+{
+ unsigned int i;
+ struct tegra_mc_timing *timing = NULL;
+
+ for (i = 0; i < mc->num_timings; i++) {
+ if (mc->timings[i].rate == rate) {
+ timing = &mc->timings[i];
+ break;
+ }
+ }
+
+ if (!timing) {
+ dev_err(mc->dev, "no memory timing registered for rate %lu\n",
+ rate);
+ return;
+ }
+
+ for (i = 0; i < mc->soc->num_emem_regs; ++i)
+ mc_writel(mc, timing->emem_data[i], mc->soc->emem_regs[i]);
+}
+
+unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc)
+{
+ u8 dram_count;
+
+ dram_count = mc_readl(mc, MC_EMEM_ADR_CFG);
+ dram_count &= MC_EMEM_ADR_CFG_EMEM_NUMDEV;
+ dram_count++;
+
+ return dram_count;
+}
+
+static int load_one_timing(struct tegra_mc *mc,
+ struct tegra_mc_timing *timing,
+ struct device_node *node)
+{
+ int err;
+ u32 tmp;
+
+ err = of_property_read_u32(node, "clock-frequency", &tmp);
+ if (err) {
+ dev_err(mc->dev,
+ "timing %s: failed to read rate\n", node->name);
+ return err;
+ }
+
+ timing->rate = tmp;
+ timing->emem_data = devm_kcalloc(mc->dev, mc->soc->num_emem_regs,
+ sizeof(u32), GFP_KERNEL);
+ if (!timing->emem_data)
+ return -ENOMEM;
+
+ err = of_property_read_u32_array(node, "nvidia,emem-configuration",
+ timing->emem_data,
+ mc->soc->num_emem_regs);
+ if (err) {
+ dev_err(mc->dev,
+ "timing %s: failed to read EMEM configuration\n",
+ node->name);
+ return err;
+ }
+
+ return 0;
+}
+
+static int load_timings(struct tegra_mc *mc, struct device_node *node)
+{
+ struct device_node *child;
+ struct tegra_mc_timing *timing;
+ int child_count = of_get_child_count(node);
+ int i = 0, err;
+
+ mc->timings = devm_kcalloc(mc->dev, child_count, sizeof(*timing),
+ GFP_KERNEL);
+ if (!mc->timings)
+ return -ENOMEM;
+
+ mc->num_timings = child_count;
+
+ for_each_child_of_node(node, child) {
+ timing = &mc->timings[i++];
+
+ err = load_one_timing(mc, timing, child);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int tegra_mc_setup_timings(struct tegra_mc *mc)
+{
+ struct device_node *node;
+ u32 ram_code, node_ram_code;
+ int err;
+
+ ram_code = tegra_read_ram_code();
+
+ mc->num_timings = 0;
+
+ for_each_child_of_node(mc->dev->of_node, node) {
+ err = of_property_read_u32(node, "nvidia,ram-code",
+ &node_ram_code);
+ if (err || (node_ram_code != ram_code)) {
+ of_node_put(node);
+ continue;
+ }
+
+ err = load_timings(mc, node);
+ if (err)
+ return err;
+ of_node_put(node);
+ break;
+ }
+
+ if (mc->num_timings == 0)
+ dev_warn(mc->dev,
+ "no memory timings for RAM code %u registered\n",
+ ram_code);
+
+ return 0;
+}
+
static const char *const status_names[32] = {
[ 1] = "External interrupt",
[ 6] = "EMEM address decode error",
@@ -248,6 +381,12 @@ static int tegra_mc_probe(struct platform_device *pdev)
return err;
}
+ err = tegra_mc_setup_timings(mc);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to setup timings: %d\n", err);
+ return err;
+ }
+
if (IS_ENABLED(CONFIG_TEGRA_IOMMU_SMMU)) {
mc->smmu = tegra_smmu_probe(&pdev->dev, mc->soc->smmu, mc);
if (IS_ERR(mc->smmu)) {
@@ -273,8 +412,8 @@ static int tegra_mc_probe(struct platform_device *pdev)
value = MC_INT_DECERR_MTS | MC_INT_SECERR_SEC | MC_INT_DECERR_VPR |
MC_INT_INVALID_APB_ASID_UPDATE | MC_INT_INVALID_SMMU_PAGE |
- MC_INT_ARBITRATION_EMEM | MC_INT_SECURITY_VIOLATION |
- MC_INT_DECERR_EMEM;
+ MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM;
+
mc_writel(mc, value, MC_INTMASK);
return 0;
diff --git a/drivers/memory/tegra/mc.h b/drivers/memory/tegra/mc.h
index d5d21147fc77..b7361b0a6696 100644
--- a/drivers/memory/tegra/mc.h
+++ b/drivers/memory/tegra/mc.h
@@ -37,4 +37,8 @@ extern const struct tegra_mc_soc tegra114_mc_soc;
extern const struct tegra_mc_soc tegra124_mc_soc;
#endif
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+extern const struct tegra_mc_soc tegra132_mc_soc;
+#endif
+
#endif /* MEMORY_TEGRA_MC_H */
diff --git a/drivers/memory/tegra/tegra114.c b/drivers/memory/tegra/tegra114.c
index 511e9a25c151..9f579589e800 100644
--- a/drivers/memory/tegra/tegra114.c
+++ b/drivers/memory/tegra/tegra114.c
@@ -896,22 +896,22 @@ static const struct tegra_mc_client tegra114_mc_clients[] = {
};
static const struct tegra_smmu_swgroup tegra114_swgroups[] = {
- { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
- { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
- { .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
- { .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
- { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
- { .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
- { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
- { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
- { .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
- { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
- { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
- { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
- { .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
- { .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
- { .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
- { .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
+ { .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
+ { .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
+ { .name = "epp", .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
+ { .name = "g2", .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
+ { .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
+ { .name = "nv", .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
+ { .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
+ { .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
+ { .name = "msenc", .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
+ { .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
+ { .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
+ { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
+ { .name = "isp", .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
+ { .name = "xusb_host", .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
+ { .name = "xusb_dev", .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
+ { .name = "tsec", .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
};
static void tegra114_flush_dcache(struct page *page, unsigned long offset,
diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
new file mode 100644
index 000000000000..8620355776fe
--- /dev/null
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -0,0 +1,1140 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author:
+ * Mikko Perttunen <mperttunen@nvidia.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sort.h>
+#include <linux/string.h>
+
+#include <soc/tegra/emc.h>
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/mc.h>
+
+#define EMC_FBIO_CFG5 0x104
+#define EMC_FBIO_CFG5_DRAM_TYPE_MASK 0x3
+#define EMC_FBIO_CFG5_DRAM_TYPE_SHIFT 0
+
+#define EMC_INTSTATUS 0x0
+#define EMC_INTSTATUS_CLKCHANGE_COMPLETE BIT(4)
+
+#define EMC_CFG 0xc
+#define EMC_CFG_DRAM_CLKSTOP_PD BIT(31)
+#define EMC_CFG_DRAM_CLKSTOP_SR BIT(30)
+#define EMC_CFG_DRAM_ACPD BIT(29)
+#define EMC_CFG_DYN_SREF BIT(28)
+#define EMC_CFG_PWR_MASK ((0xF << 28) | BIT(18))
+#define EMC_CFG_DSR_VTTGEN_DRV_EN BIT(18)
+
+#define EMC_REFCTRL 0x20
+#define EMC_REFCTRL_DEV_SEL_SHIFT 0
+#define EMC_REFCTRL_ENABLE BIT(31)
+
+#define EMC_TIMING_CONTROL 0x28
+#define EMC_RC 0x2c
+#define EMC_RFC 0x30
+#define EMC_RAS 0x34
+#define EMC_RP 0x38
+#define EMC_R2W 0x3c
+#define EMC_W2R 0x40
+#define EMC_R2P 0x44
+#define EMC_W2P 0x48
+#define EMC_RD_RCD 0x4c
+#define EMC_WR_RCD 0x50
+#define EMC_RRD 0x54
+#define EMC_REXT 0x58
+#define EMC_WDV 0x5c
+#define EMC_QUSE 0x60
+#define EMC_QRST 0x64
+#define EMC_QSAFE 0x68
+#define EMC_RDV 0x6c
+#define EMC_REFRESH 0x70
+#define EMC_BURST_REFRESH_NUM 0x74
+#define EMC_PDEX2WR 0x78
+#define EMC_PDEX2RD 0x7c
+#define EMC_PCHG2PDEN 0x80
+#define EMC_ACT2PDEN 0x84
+#define EMC_AR2PDEN 0x88
+#define EMC_RW2PDEN 0x8c
+#define EMC_TXSR 0x90
+#define EMC_TCKE 0x94
+#define EMC_TFAW 0x98
+#define EMC_TRPAB 0x9c
+#define EMC_TCLKSTABLE 0xa0
+#define EMC_TCLKSTOP 0xa4
+#define EMC_TREFBW 0xa8
+#define EMC_ODT_WRITE 0xb0
+#define EMC_ODT_READ 0xb4
+#define EMC_WEXT 0xb8
+#define EMC_CTT 0xbc
+#define EMC_RFC_SLR 0xc0
+#define EMC_MRS_WAIT_CNT2 0xc4
+
+#define EMC_MRS_WAIT_CNT 0xc8
+#define EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT 0
+#define EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK \
+ (0x3FF << EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT)
+#define EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT 16
+#define EMC_MRS_WAIT_CNT_LONG_WAIT_MASK \
+ (0x3FF << EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT)
+
+#define EMC_MRS 0xcc
+#define EMC_MODE_SET_DLL_RESET BIT(8)
+#define EMC_MODE_SET_LONG_CNT BIT(26)
+#define EMC_EMRS 0xd0
+#define EMC_REF 0xd4
+#define EMC_PRE 0xd8
+
+#define EMC_SELF_REF 0xe0
+#define EMC_SELF_REF_CMD_ENABLED BIT(0)
+#define EMC_SELF_REF_DEV_SEL_SHIFT 30
+
+#define EMC_MRW 0xe8
+
+#define EMC_MRR 0xec
+#define EMC_MRR_MA_SHIFT 16
+#define LPDDR2_MR4_TEMP_SHIFT 0
+
+#define EMC_XM2DQSPADCTRL3 0xf8
+#define EMC_FBIO_SPARE 0x100
+
+#define EMC_FBIO_CFG6 0x114
+#define EMC_EMRS2 0x12c
+#define EMC_MRW2 0x134
+#define EMC_MRW4 0x13c
+#define EMC_EINPUT 0x14c
+#define EMC_EINPUT_DURATION 0x150
+#define EMC_PUTERM_EXTRA 0x154
+#define EMC_TCKESR 0x158
+#define EMC_TPD 0x15c
+
+#define EMC_AUTO_CAL_CONFIG 0x2a4
+#define EMC_AUTO_CAL_CONFIG_AUTO_CAL_START BIT(31)
+#define EMC_AUTO_CAL_INTERVAL 0x2a8
+#define EMC_AUTO_CAL_STATUS 0x2ac
+#define EMC_AUTO_CAL_STATUS_ACTIVE BIT(31)
+#define EMC_STATUS 0x2b4
+#define EMC_STATUS_TIMING_UPDATE_STALLED BIT(23)
+
+#define EMC_CFG_2 0x2b8
+#define EMC_CFG_2_MODE_SHIFT 0
+#define EMC_CFG_2_DIS_STP_OB_CLK_DURING_NON_WR BIT(6)
+
+#define EMC_CFG_DIG_DLL 0x2bc
+#define EMC_CFG_DIG_DLL_PERIOD 0x2c0
+#define EMC_RDV_MASK 0x2cc
+#define EMC_WDV_MASK 0x2d0
+#define EMC_CTT_DURATION 0x2d8
+#define EMC_CTT_TERM_CTRL 0x2dc
+#define EMC_ZCAL_INTERVAL 0x2e0
+#define EMC_ZCAL_WAIT_CNT 0x2e4
+
+#define EMC_ZQ_CAL 0x2ec
+#define EMC_ZQ_CAL_CMD BIT(0)
+#define EMC_ZQ_CAL_LONG BIT(4)
+#define EMC_ZQ_CAL_LONG_CMD_DEV0 \
+ (DRAM_DEV_SEL_0 | EMC_ZQ_CAL_LONG | EMC_ZQ_CAL_CMD)
+#define EMC_ZQ_CAL_LONG_CMD_DEV1 \
+ (DRAM_DEV_SEL_1 | EMC_ZQ_CAL_LONG | EMC_ZQ_CAL_CMD)
+
+#define EMC_XM2CMDPADCTRL 0x2f0
+#define EMC_XM2DQSPADCTRL 0x2f8
+#define EMC_XM2DQSPADCTRL2 0x2fc
+#define EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE BIT(0)
+#define EMC_XM2DQSPADCTRL2_VREF_ENABLE BIT(5)
+#define EMC_XM2DQPADCTRL 0x300
+#define EMC_XM2DQPADCTRL2 0x304
+#define EMC_XM2CLKPADCTRL 0x308
+#define EMC_XM2COMPPADCTRL 0x30c
+#define EMC_XM2VTTGENPADCTRL 0x310
+#define EMC_XM2VTTGENPADCTRL2 0x314
+#define EMC_XM2VTTGENPADCTRL3 0x318
+#define EMC_XM2DQSPADCTRL4 0x320
+#define EMC_DLL_XFORM_DQS0 0x328
+#define EMC_DLL_XFORM_DQS1 0x32c
+#define EMC_DLL_XFORM_DQS2 0x330
+#define EMC_DLL_XFORM_DQS3 0x334
+#define EMC_DLL_XFORM_DQS4 0x338
+#define EMC_DLL_XFORM_DQS5 0x33c
+#define EMC_DLL_XFORM_DQS6 0x340
+#define EMC_DLL_XFORM_DQS7 0x344
+#define EMC_DLL_XFORM_QUSE0 0x348
+#define EMC_DLL_XFORM_QUSE1 0x34c
+#define EMC_DLL_XFORM_QUSE2 0x350
+#define EMC_DLL_XFORM_QUSE3 0x354
+#define EMC_DLL_XFORM_QUSE4 0x358
+#define EMC_DLL_XFORM_QUSE5 0x35c
+#define EMC_DLL_XFORM_QUSE6 0x360
+#define EMC_DLL_XFORM_QUSE7 0x364
+#define EMC_DLL_XFORM_DQ0 0x368
+#define EMC_DLL_XFORM_DQ1 0x36c
+#define EMC_DLL_XFORM_DQ2 0x370
+#define EMC_DLL_XFORM_DQ3 0x374
+#define EMC_DLI_TRIM_TXDQS0 0x3a8
+#define EMC_DLI_TRIM_TXDQS1 0x3ac
+#define EMC_DLI_TRIM_TXDQS2 0x3b0
+#define EMC_DLI_TRIM_TXDQS3 0x3b4
+#define EMC_DLI_TRIM_TXDQS4 0x3b8
+#define EMC_DLI_TRIM_TXDQS5 0x3bc
+#define EMC_DLI_TRIM_TXDQS6 0x3c0
+#define EMC_DLI_TRIM_TXDQS7 0x3c4
+#define EMC_STALL_THEN_EXE_AFTER_CLKCHANGE 0x3cc
+#define EMC_SEL_DPD_CTRL 0x3d8
+#define EMC_SEL_DPD_CTRL_DATA_SEL_DPD BIT(8)
+#define EMC_SEL_DPD_CTRL_ODT_SEL_DPD BIT(5)
+#define EMC_SEL_DPD_CTRL_RESET_SEL_DPD BIT(4)
+#define EMC_SEL_DPD_CTRL_CA_SEL_DPD BIT(3)
+#define EMC_SEL_DPD_CTRL_CLK_SEL_DPD BIT(2)
+#define EMC_SEL_DPD_CTRL_DDR3_MASK \
+ ((0xf << 2) | BIT(8))
+#define EMC_SEL_DPD_CTRL_MASK \
+ ((0x3 << 2) | BIT(5) | BIT(8))
+#define EMC_PRE_REFRESH_REQ_CNT 0x3dc
+#define EMC_DYN_SELF_REF_CONTROL 0x3e0
+#define EMC_TXSRDLL 0x3e4
+#define EMC_CCFIFO_ADDR 0x3e8
+#define EMC_CCFIFO_DATA 0x3ec
+#define EMC_CCFIFO_STATUS 0x3f0
+#define EMC_CDB_CNTL_1 0x3f4
+#define EMC_CDB_CNTL_2 0x3f8
+#define EMC_XM2CLKPADCTRL2 0x3fc
+#define EMC_AUTO_CAL_CONFIG2 0x458
+#define EMC_AUTO_CAL_CONFIG3 0x45c
+#define EMC_IBDLY 0x468
+#define EMC_DLL_XFORM_ADDR0 0x46c
+#define EMC_DLL_XFORM_ADDR1 0x470
+#define EMC_DLL_XFORM_ADDR2 0x474
+#define EMC_DSR_VTTGEN_DRV 0x47c
+#define EMC_TXDSRVTTGEN 0x480
+#define EMC_XM2CMDPADCTRL4 0x484
+#define EMC_XM2CMDPADCTRL5 0x488
+#define EMC_DLL_XFORM_DQS8 0x4a0
+#define EMC_DLL_XFORM_DQS9 0x4a4
+#define EMC_DLL_XFORM_DQS10 0x4a8
+#define EMC_DLL_XFORM_DQS11 0x4ac
+#define EMC_DLL_XFORM_DQS12 0x4b0
+#define EMC_DLL_XFORM_DQS13 0x4b4
+#define EMC_DLL_XFORM_DQS14 0x4b8
+#define EMC_DLL_XFORM_DQS15 0x4bc
+#define EMC_DLL_XFORM_QUSE8 0x4c0
+#define EMC_DLL_XFORM_QUSE9 0x4c4
+#define EMC_DLL_XFORM_QUSE10 0x4c8
+#define EMC_DLL_XFORM_QUSE11 0x4cc
+#define EMC_DLL_XFORM_QUSE12 0x4d0
+#define EMC_DLL_XFORM_QUSE13 0x4d4
+#define EMC_DLL_XFORM_QUSE14 0x4d8
+#define EMC_DLL_XFORM_QUSE15 0x4dc
+#define EMC_DLL_XFORM_DQ4 0x4e0
+#define EMC_DLL_XFORM_DQ5 0x4e4
+#define EMC_DLL_XFORM_DQ6 0x4e8
+#define EMC_DLL_XFORM_DQ7 0x4ec
+#define EMC_DLI_TRIM_TXDQS8 0x520
+#define EMC_DLI_TRIM_TXDQS9 0x524
+#define EMC_DLI_TRIM_TXDQS10 0x528
+#define EMC_DLI_TRIM_TXDQS11 0x52c
+#define EMC_DLI_TRIM_TXDQS12 0x530
+#define EMC_DLI_TRIM_TXDQS13 0x534
+#define EMC_DLI_TRIM_TXDQS14 0x538
+#define EMC_DLI_TRIM_TXDQS15 0x53c
+#define EMC_CDB_CNTL_3 0x540
+#define EMC_XM2DQSPADCTRL5 0x544
+#define EMC_XM2DQSPADCTRL6 0x548
+#define EMC_XM2DQPADCTRL3 0x54c
+#define EMC_DLL_XFORM_ADDR3 0x550
+#define EMC_DLL_XFORM_ADDR4 0x554
+#define EMC_DLL_XFORM_ADDR5 0x558
+#define EMC_CFG_PIPE 0x560
+#define EMC_QPOP 0x564
+#define EMC_QUSE_WIDTH 0x568
+#define EMC_PUTERM_WIDTH 0x56c
+#define EMC_BGBIAS_CTL0 0x570
+#define EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX BIT(3)
+#define EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_VTTGEN BIT(2)
+#define EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD BIT(1)
+#define EMC_PUTERM_ADJ 0x574
+
+#define DRAM_DEV_SEL_ALL 0
+#define DRAM_DEV_SEL_0 (2 << 30)
+#define DRAM_DEV_SEL_1 (1 << 30)
+
+#define EMC_CFG_POWER_FEATURES_MASK \
+ (EMC_CFG_DYN_SREF | EMC_CFG_DRAM_ACPD | EMC_CFG_DRAM_CLKSTOP_SR | \
+ EMC_CFG_DRAM_CLKSTOP_PD | EMC_CFG_DSR_VTTGEN_DRV_EN)
+#define EMC_REFCTRL_DEV_SEL(n) (((n > 1) ? 0 : 2) << EMC_REFCTRL_DEV_SEL_SHIFT)
+#define EMC_DRAM_DEV_SEL(n) ((n > 1) ? DRAM_DEV_SEL_ALL : DRAM_DEV_SEL_0)
+
+/* Maximum amount of time in us. to wait for changes to become effective */
+#define EMC_STATUS_UPDATE_TIMEOUT 1000
+
+enum emc_dram_type {
+ DRAM_TYPE_DDR3 = 0,
+ DRAM_TYPE_DDR1 = 1,
+ DRAM_TYPE_LPDDR3 = 2,
+ DRAM_TYPE_DDR2 = 3
+};
+
+enum emc_dll_change {
+ DLL_CHANGE_NONE,
+ DLL_CHANGE_ON,
+ DLL_CHANGE_OFF
+};
+
+static const unsigned long emc_burst_regs[] = {
+ EMC_RC,
+ EMC_RFC,
+ EMC_RFC_SLR,
+ EMC_RAS,
+ EMC_RP,
+ EMC_R2W,
+ EMC_W2R,
+ EMC_R2P,
+ EMC_W2P,
+ EMC_RD_RCD,
+ EMC_WR_RCD,
+ EMC_RRD,
+ EMC_REXT,
+ EMC_WEXT,
+ EMC_WDV,
+ EMC_WDV_MASK,
+ EMC_QUSE,
+ EMC_QUSE_WIDTH,
+ EMC_IBDLY,
+ EMC_EINPUT,
+ EMC_EINPUT_DURATION,
+ EMC_PUTERM_EXTRA,
+ EMC_PUTERM_WIDTH,
+ EMC_PUTERM_ADJ,
+ EMC_CDB_CNTL_1,
+ EMC_CDB_CNTL_2,
+ EMC_CDB_CNTL_3,
+ EMC_QRST,
+ EMC_QSAFE,
+ EMC_RDV,
+ EMC_RDV_MASK,
+ EMC_REFRESH,
+ EMC_BURST_REFRESH_NUM,
+ EMC_PRE_REFRESH_REQ_CNT,
+ EMC_PDEX2WR,
+ EMC_PDEX2RD,
+ EMC_PCHG2PDEN,
+ EMC_ACT2PDEN,
+ EMC_AR2PDEN,
+ EMC_RW2PDEN,
+ EMC_TXSR,
+ EMC_TXSRDLL,
+ EMC_TCKE,
+ EMC_TCKESR,
+ EMC_TPD,
+ EMC_TFAW,
+ EMC_TRPAB,
+ EMC_TCLKSTABLE,
+ EMC_TCLKSTOP,
+ EMC_TREFBW,
+ EMC_FBIO_CFG6,
+ EMC_ODT_WRITE,
+ EMC_ODT_READ,
+ EMC_FBIO_CFG5,
+ EMC_CFG_DIG_DLL,
+ EMC_CFG_DIG_DLL_PERIOD,
+ EMC_DLL_XFORM_DQS0,
+ EMC_DLL_XFORM_DQS1,
+ EMC_DLL_XFORM_DQS2,
+ EMC_DLL_XFORM_DQS3,
+ EMC_DLL_XFORM_DQS4,
+ EMC_DLL_XFORM_DQS5,
+ EMC_DLL_XFORM_DQS6,
+ EMC_DLL_XFORM_DQS7,
+ EMC_DLL_XFORM_DQS8,
+ EMC_DLL_XFORM_DQS9,
+ EMC_DLL_XFORM_DQS10,
+ EMC_DLL_XFORM_DQS11,
+ EMC_DLL_XFORM_DQS12,
+ EMC_DLL_XFORM_DQS13,
+ EMC_DLL_XFORM_DQS14,
+ EMC_DLL_XFORM_DQS15,
+ EMC_DLL_XFORM_QUSE0,
+ EMC_DLL_XFORM_QUSE1,
+ EMC_DLL_XFORM_QUSE2,
+ EMC_DLL_XFORM_QUSE3,
+ EMC_DLL_XFORM_QUSE4,
+ EMC_DLL_XFORM_QUSE5,
+ EMC_DLL_XFORM_QUSE6,
+ EMC_DLL_XFORM_QUSE7,
+ EMC_DLL_XFORM_ADDR0,
+ EMC_DLL_XFORM_ADDR1,
+ EMC_DLL_XFORM_ADDR2,
+ EMC_DLL_XFORM_ADDR3,
+ EMC_DLL_XFORM_ADDR4,
+ EMC_DLL_XFORM_ADDR5,
+ EMC_DLL_XFORM_QUSE8,
+ EMC_DLL_XFORM_QUSE9,
+ EMC_DLL_XFORM_QUSE10,
+ EMC_DLL_XFORM_QUSE11,
+ EMC_DLL_XFORM_QUSE12,
+ EMC_DLL_XFORM_QUSE13,
+ EMC_DLL_XFORM_QUSE14,
+ EMC_DLL_XFORM_QUSE15,
+ EMC_DLI_TRIM_TXDQS0,
+ EMC_DLI_TRIM_TXDQS1,
+ EMC_DLI_TRIM_TXDQS2,
+ EMC_DLI_TRIM_TXDQS3,
+ EMC_DLI_TRIM_TXDQS4,
+ EMC_DLI_TRIM_TXDQS5,
+ EMC_DLI_TRIM_TXDQS6,
+ EMC_DLI_TRIM_TXDQS7,
+ EMC_DLI_TRIM_TXDQS8,
+ EMC_DLI_TRIM_TXDQS9,
+ EMC_DLI_TRIM_TXDQS10,
+ EMC_DLI_TRIM_TXDQS11,
+ EMC_DLI_TRIM_TXDQS12,
+ EMC_DLI_TRIM_TXDQS13,
+ EMC_DLI_TRIM_TXDQS14,
+ EMC_DLI_TRIM_TXDQS15,
+ EMC_DLL_XFORM_DQ0,
+ EMC_DLL_XFORM_DQ1,
+ EMC_DLL_XFORM_DQ2,
+ EMC_DLL_XFORM_DQ3,
+ EMC_DLL_XFORM_DQ4,
+ EMC_DLL_XFORM_DQ5,
+ EMC_DLL_XFORM_DQ6,
+ EMC_DLL_XFORM_DQ7,
+ EMC_XM2CMDPADCTRL,
+ EMC_XM2CMDPADCTRL4,
+ EMC_XM2CMDPADCTRL5,
+ EMC_XM2DQPADCTRL2,
+ EMC_XM2DQPADCTRL3,
+ EMC_XM2CLKPADCTRL,
+ EMC_XM2CLKPADCTRL2,
+ EMC_XM2COMPPADCTRL,
+ EMC_XM2VTTGENPADCTRL,
+ EMC_XM2VTTGENPADCTRL2,
+ EMC_XM2VTTGENPADCTRL3,
+ EMC_XM2DQSPADCTRL3,
+ EMC_XM2DQSPADCTRL4,
+ EMC_XM2DQSPADCTRL5,
+ EMC_XM2DQSPADCTRL6,
+ EMC_DSR_VTTGEN_DRV,
+ EMC_TXDSRVTTGEN,
+ EMC_FBIO_SPARE,
+ EMC_ZCAL_WAIT_CNT,
+ EMC_MRS_WAIT_CNT2,
+ EMC_CTT,
+ EMC_CTT_DURATION,
+ EMC_CFG_PIPE,
+ EMC_DYN_SELF_REF_CONTROL,
+ EMC_QPOP
+};
+
+struct emc_timing {
+ unsigned long rate;
+
+ u32 emc_burst_data[ARRAY_SIZE(emc_burst_regs)];
+
+ u32 emc_auto_cal_config;
+ u32 emc_auto_cal_config2;
+ u32 emc_auto_cal_config3;
+ u32 emc_auto_cal_interval;
+ u32 emc_bgbias_ctl0;
+ u32 emc_cfg;
+ u32 emc_cfg_2;
+ u32 emc_ctt_term_ctrl;
+ u32 emc_mode_1;
+ u32 emc_mode_2;
+ u32 emc_mode_4;
+ u32 emc_mode_reset;
+ u32 emc_mrs_wait_cnt;
+ u32 emc_sel_dpd_ctrl;
+ u32 emc_xm2dqspadctrl2;
+ u32 emc_zcal_cnt_long;
+ u32 emc_zcal_interval;
+};
+
+struct tegra_emc {
+ struct device *dev;
+
+ struct tegra_mc *mc;
+
+ void __iomem *regs;
+
+ enum emc_dram_type dram_type;
+ unsigned int dram_num;
+
+ struct emc_timing last_timing;
+ struct emc_timing *timings;
+ unsigned int num_timings;
+};
+
+/* Timing change sequence functions */
+
+static void emc_ccfifo_writel(struct tegra_emc *emc, u32 value,
+ unsigned long offset)
+{
+ writel(value, emc->regs + EMC_CCFIFO_DATA);
+ writel(offset, emc->regs + EMC_CCFIFO_ADDR);
+}
+
+static void emc_seq_update_timing(struct tegra_emc *emc)
+{
+ unsigned int i;
+ u32 value;
+
+ writel(1, emc->regs + EMC_TIMING_CONTROL);
+
+ for (i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; ++i) {
+ value = readl(emc->regs + EMC_STATUS);
+ if ((value & EMC_STATUS_TIMING_UPDATE_STALLED) == 0)
+ return;
+ udelay(1);
+ }
+
+ dev_err(emc->dev, "timing update timed out\n");
+}
+
+static void emc_seq_disable_auto_cal(struct tegra_emc *emc)
+{
+ unsigned int i;
+ u32 value;
+
+ writel(0, emc->regs + EMC_AUTO_CAL_INTERVAL);
+
+ for (i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; ++i) {
+ value = readl(emc->regs + EMC_AUTO_CAL_STATUS);
+ if ((value & EMC_AUTO_CAL_STATUS_ACTIVE) == 0)
+ return;
+ udelay(1);
+ }
+
+ dev_err(emc->dev, "auto cal disable timed out\n");
+}
+
+static void emc_seq_wait_clkchange(struct tegra_emc *emc)
+{
+ unsigned int i;
+ u32 value;
+
+ for (i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; ++i) {
+ value = readl(emc->regs + EMC_INTSTATUS);
+ if (value & EMC_INTSTATUS_CLKCHANGE_COMPLETE)
+ return;
+ udelay(1);
+ }
+
+ dev_err(emc->dev, "clock change timed out\n");
+}
+
+static struct emc_timing *tegra_emc_find_timing(struct tegra_emc *emc,
+ unsigned long rate)
+{
+ struct emc_timing *timing = NULL;
+ unsigned int i;
+
+ for (i = 0; i < emc->num_timings; i++) {
+ if (emc->timings[i].rate == rate) {
+ timing = &emc->timings[i];
+ break;
+ }
+ }
+
+ if (!timing) {
+ dev_err(emc->dev, "no timing for rate %lu\n", rate);
+ return NULL;
+ }
+
+ return timing;
+}
+
+int tegra_emc_prepare_timing_change(struct tegra_emc *emc,
+ unsigned long rate)
+{
+ struct emc_timing *timing = tegra_emc_find_timing(emc, rate);
+ struct emc_timing *last = &emc->last_timing;
+ enum emc_dll_change dll_change;
+ unsigned int pre_wait = 0;
+ u32 val, val2, mask;
+ bool update = false;
+ unsigned int i;
+
+ if (!timing)
+ return -ENOENT;
+
+ if ((last->emc_mode_1 & 0x1) == (timing->emc_mode_1 & 0x1))
+ dll_change = DLL_CHANGE_NONE;
+ else if (timing->emc_mode_1 & 0x1)
+ dll_change = DLL_CHANGE_ON;
+ else
+ dll_change = DLL_CHANGE_OFF;
+
+ /* Clear CLKCHANGE_COMPLETE interrupts */
+ writel(EMC_INTSTATUS_CLKCHANGE_COMPLETE, emc->regs + EMC_INTSTATUS);
+
+ /* Disable dynamic self-refresh */
+ val = readl(emc->regs + EMC_CFG);
+ if (val & EMC_CFG_PWR_MASK) {
+ val &= ~EMC_CFG_POWER_FEATURES_MASK;
+ writel(val, emc->regs + EMC_CFG);
+
+ pre_wait = 5;
+ }
+
+ /* Disable SEL_DPD_CTRL for clock change */
+ if (emc->dram_type == DRAM_TYPE_DDR3)
+ mask = EMC_SEL_DPD_CTRL_DDR3_MASK;
+ else
+ mask = EMC_SEL_DPD_CTRL_MASK;
+
+ val = readl(emc->regs + EMC_SEL_DPD_CTRL);
+ if (val & mask) {
+ val &= ~mask;
+ writel(val, emc->regs + EMC_SEL_DPD_CTRL);
+ }
+
+ /* Prepare DQ/DQS for clock change */
+ val = readl(emc->regs + EMC_BGBIAS_CTL0);
+ val2 = last->emc_bgbias_ctl0;
+ if (!(timing->emc_bgbias_ctl0 &
+ EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX) &&
+ (val & EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX)) {
+ val2 &= ~EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX;
+ update = true;
+ }
+
+ if ((val & EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD) ||
+ (val & EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_VTTGEN)) {
+ update = true;
+ }
+
+ if (update) {
+ writel(val2, emc->regs + EMC_BGBIAS_CTL0);
+ if (pre_wait < 5)
+ pre_wait = 5;
+ }
+
+ update = false;
+ val = readl(emc->regs + EMC_XM2DQSPADCTRL2);
+ if (timing->emc_xm2dqspadctrl2 & EMC_XM2DQSPADCTRL2_VREF_ENABLE &&
+ !(val & EMC_XM2DQSPADCTRL2_VREF_ENABLE)) {
+ val |= EMC_XM2DQSPADCTRL2_VREF_ENABLE;
+ update = true;
+ }
+
+ if (timing->emc_xm2dqspadctrl2 & EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE &&
+ !(val & EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE)) {
+ val |= EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE;
+ update = true;
+ }
+
+ if (update) {
+ writel(val, emc->regs + EMC_XM2DQSPADCTRL2);
+ if (pre_wait < 30)
+ pre_wait = 30;
+ }
+
+ /* Wait to settle */
+ if (pre_wait) {
+ emc_seq_update_timing(emc);
+ udelay(pre_wait);
+ }
+
+ /* Program CTT_TERM control */
+ if (last->emc_ctt_term_ctrl != timing->emc_ctt_term_ctrl) {
+ emc_seq_disable_auto_cal(emc);
+ writel(timing->emc_ctt_term_ctrl,
+ emc->regs + EMC_CTT_TERM_CTRL);
+ emc_seq_update_timing(emc);
+ }
+
+ /* Program burst shadow registers */
+ for (i = 0; i < ARRAY_SIZE(timing->emc_burst_data); ++i)
+ writel(timing->emc_burst_data[i],
+ emc->regs + emc_burst_regs[i]);
+
+ writel(timing->emc_xm2dqspadctrl2, emc->regs + EMC_XM2DQSPADCTRL2);
+ writel(timing->emc_zcal_interval, emc->regs + EMC_ZCAL_INTERVAL);
+
+ tegra_mc_write_emem_configuration(emc->mc, timing->rate);
+
+ val = timing->emc_cfg & ~EMC_CFG_POWER_FEATURES_MASK;
+ emc_ccfifo_writel(emc, val, EMC_CFG);
+
+ /* Program AUTO_CAL_CONFIG */
+ if (timing->emc_auto_cal_config2 != last->emc_auto_cal_config2)
+ emc_ccfifo_writel(emc, timing->emc_auto_cal_config2,
+ EMC_AUTO_CAL_CONFIG2);
+
+ if (timing->emc_auto_cal_config3 != last->emc_auto_cal_config3)
+ emc_ccfifo_writel(emc, timing->emc_auto_cal_config3,
+ EMC_AUTO_CAL_CONFIG3);
+
+ if (timing->emc_auto_cal_config != last->emc_auto_cal_config) {
+ val = timing->emc_auto_cal_config;
+ val &= EMC_AUTO_CAL_CONFIG_AUTO_CAL_START;
+ emc_ccfifo_writel(emc, val, EMC_AUTO_CAL_CONFIG);
+ }
+
+ /* DDR3: predict MRS long wait count */
+ if (emc->dram_type == DRAM_TYPE_DDR3 &&
+ dll_change == DLL_CHANGE_ON) {
+ u32 cnt = 512;
+
+ if (timing->emc_zcal_interval != 0 &&
+ last->emc_zcal_interval == 0)
+ cnt -= emc->dram_num * 256;
+
+ val = (timing->emc_mrs_wait_cnt
+ & EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK)
+ >> EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT;
+ if (cnt < val)
+ cnt = val;
+
+ val = timing->emc_mrs_wait_cnt
+ & ~EMC_MRS_WAIT_CNT_LONG_WAIT_MASK;
+ val |= (cnt << EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT)
+ & EMC_MRS_WAIT_CNT_LONG_WAIT_MASK;
+
+ writel(val, emc->regs + EMC_MRS_WAIT_CNT);
+ }
+
+ val = timing->emc_cfg_2;
+ val &= ~EMC_CFG_2_DIS_STP_OB_CLK_DURING_NON_WR;
+ emc_ccfifo_writel(emc, val, EMC_CFG_2);
+
+ /* DDR3: Turn off DLL and enter self-refresh */
+ if (emc->dram_type == DRAM_TYPE_DDR3 && dll_change == DLL_CHANGE_OFF)
+ emc_ccfifo_writel(emc, timing->emc_mode_1, EMC_EMRS);
+
+ /* Disable refresh controller */
+ emc_ccfifo_writel(emc, EMC_REFCTRL_DEV_SEL(emc->dram_num),
+ EMC_REFCTRL);
+ if (emc->dram_type == DRAM_TYPE_DDR3)
+ emc_ccfifo_writel(emc, EMC_DRAM_DEV_SEL(emc->dram_num) |
+ EMC_SELF_REF_CMD_ENABLED,
+ EMC_SELF_REF);
+
+ /* Flow control marker */
+ emc_ccfifo_writel(emc, 1, EMC_STALL_THEN_EXE_AFTER_CLKCHANGE);
+
+ /* DDR3: Exit self-refresh */
+ if (emc->dram_type == DRAM_TYPE_DDR3)
+ emc_ccfifo_writel(emc, EMC_DRAM_DEV_SEL(emc->dram_num),
+ EMC_SELF_REF);
+ emc_ccfifo_writel(emc, EMC_REFCTRL_DEV_SEL(emc->dram_num) |
+ EMC_REFCTRL_ENABLE,
+ EMC_REFCTRL);
+
+ /* Set DRAM mode registers */
+ if (emc->dram_type == DRAM_TYPE_DDR3) {
+ if (timing->emc_mode_1 != last->emc_mode_1)
+ emc_ccfifo_writel(emc, timing->emc_mode_1, EMC_EMRS);
+ if (timing->emc_mode_2 != last->emc_mode_2)
+ emc_ccfifo_writel(emc, timing->emc_mode_2, EMC_EMRS2);
+
+ if ((timing->emc_mode_reset != last->emc_mode_reset) ||
+ dll_change == DLL_CHANGE_ON) {
+ val = timing->emc_mode_reset;
+ if (dll_change == DLL_CHANGE_ON) {
+ val |= EMC_MODE_SET_DLL_RESET;
+ val |= EMC_MODE_SET_LONG_CNT;
+ } else {
+ val &= ~EMC_MODE_SET_DLL_RESET;
+ }
+ emc_ccfifo_writel(emc, val, EMC_MRS);
+ }
+ } else {
+ if (timing->emc_mode_2 != last->emc_mode_2)
+ emc_ccfifo_writel(emc, timing->emc_mode_2, EMC_MRW2);
+ if (timing->emc_mode_1 != last->emc_mode_1)
+ emc_ccfifo_writel(emc, timing->emc_mode_1, EMC_MRW);
+ if (timing->emc_mode_4 != last->emc_mode_4)
+ emc_ccfifo_writel(emc, timing->emc_mode_4, EMC_MRW4);
+ }
+
+ /* Issue ZCAL command if turning ZCAL on */
+ if (timing->emc_zcal_interval != 0 && last->emc_zcal_interval == 0) {
+ emc_ccfifo_writel(emc, EMC_ZQ_CAL_LONG_CMD_DEV0, EMC_ZQ_CAL);
+ if (emc->dram_num > 1)
+ emc_ccfifo_writel(emc, EMC_ZQ_CAL_LONG_CMD_DEV1,
+ EMC_ZQ_CAL);
+ }
+
+ /* Write to RO register to remove stall after change */
+ emc_ccfifo_writel(emc, 0, EMC_CCFIFO_STATUS);
+
+ if (timing->emc_cfg_2 & EMC_CFG_2_DIS_STP_OB_CLK_DURING_NON_WR)
+ emc_ccfifo_writel(emc, timing->emc_cfg_2, EMC_CFG_2);
+
+ /* Disable AUTO_CAL for clock change */
+ emc_seq_disable_auto_cal(emc);
+
+ /* Read register to wait until programming has settled */
+ readl(emc->regs + EMC_INTSTATUS);
+
+ return 0;
+}
+
+void tegra_emc_complete_timing_change(struct tegra_emc *emc,
+ unsigned long rate)
+{
+ struct emc_timing *timing = tegra_emc_find_timing(emc, rate);
+ struct emc_timing *last = &emc->last_timing;
+ u32 val;
+
+ if (!timing)
+ return;
+
+ /* Wait until the state machine has settled */
+ emc_seq_wait_clkchange(emc);
+
+ /* Restore AUTO_CAL */
+ if (timing->emc_ctt_term_ctrl != last->emc_ctt_term_ctrl)
+ writel(timing->emc_auto_cal_interval,
+ emc->regs + EMC_AUTO_CAL_INTERVAL);
+
+ /* Restore dynamic self-refresh */
+ if (timing->emc_cfg & EMC_CFG_PWR_MASK)
+ writel(timing->emc_cfg, emc->regs + EMC_CFG);
+
+ /* Set ZCAL wait count */
+ writel(timing->emc_zcal_cnt_long, emc->regs + EMC_ZCAL_WAIT_CNT);
+
+ /* LPDDR3: Turn off BGBIAS if low frequency */
+ if (emc->dram_type == DRAM_TYPE_LPDDR3 &&
+ timing->emc_bgbias_ctl0 &
+ EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX) {
+ val = timing->emc_bgbias_ctl0;
+ val |= EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_VTTGEN;
+ val |= EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD;
+ writel(val, emc->regs + EMC_BGBIAS_CTL0);
+ } else {
+ if (emc->dram_type == DRAM_TYPE_DDR3 &&
+ readl(emc->regs + EMC_BGBIAS_CTL0) !=
+ timing->emc_bgbias_ctl0) {
+ writel(timing->emc_bgbias_ctl0,
+ emc->regs + EMC_BGBIAS_CTL0);
+ }
+
+ writel(timing->emc_auto_cal_interval,
+ emc->regs + EMC_AUTO_CAL_INTERVAL);
+ }
+
+ /* Wait for timing to settle */
+ udelay(2);
+
+ /* Reprogram SEL_DPD_CTRL */
+ writel(timing->emc_sel_dpd_ctrl, emc->regs + EMC_SEL_DPD_CTRL);
+ emc_seq_update_timing(emc);
+
+ emc->last_timing = *timing;
+}
+
+/* Initialization and deinitialization */
+
+static void emc_read_current_timing(struct tegra_emc *emc,
+ struct emc_timing *timing)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(emc_burst_regs); ++i)
+ timing->emc_burst_data[i] =
+ readl(emc->regs + emc_burst_regs[i]);
+
+ timing->emc_cfg = readl(emc->regs + EMC_CFG);
+
+ timing->emc_auto_cal_interval = 0;
+ timing->emc_zcal_cnt_long = 0;
+ timing->emc_mode_1 = 0;
+ timing->emc_mode_2 = 0;
+ timing->emc_mode_4 = 0;
+ timing->emc_mode_reset = 0;
+}
+
+static int emc_init(struct tegra_emc *emc)
+{
+ emc->dram_type = readl(emc->regs + EMC_FBIO_CFG5);
+ emc->dram_type &= EMC_FBIO_CFG5_DRAM_TYPE_MASK;
+ emc->dram_type >>= EMC_FBIO_CFG5_DRAM_TYPE_SHIFT;
+
+ emc->dram_num = tegra_mc_get_emem_device_count(emc->mc);
+
+ emc_read_current_timing(emc, &emc->last_timing);
+
+ return 0;
+}
+
+static int load_one_timing_from_dt(struct tegra_emc *emc,
+ struct emc_timing *timing,
+ struct device_node *node)
+{
+ u32 value;
+ int err;
+
+ err = of_property_read_u32(node, "clock-frequency", &value);
+ if (err) {
+ dev_err(emc->dev, "timing %s: failed to read rate: %d\n",
+ node->name, err);
+ return err;
+ }
+
+ timing->rate = value;
+
+ err = of_property_read_u32_array(node, "nvidia,emc-configuration",
+ timing->emc_burst_data,
+ ARRAY_SIZE(timing->emc_burst_data));
+ if (err) {
+ dev_err(emc->dev,
+ "timing %s: failed to read emc burst data: %d\n",
+ node->name, err);
+ return err;
+ }
+
+#define EMC_READ_PROP(prop, dtprop) { \
+ err = of_property_read_u32(node, dtprop, &timing->prop); \
+ if (err) { \
+ dev_err(emc->dev, "timing %s: failed to read " #prop ": %d\n", \
+ node->name, err); \
+ return err; \
+ } \
+}
+
+ EMC_READ_PROP(emc_auto_cal_config, "nvidia,emc-auto-cal-config")
+ EMC_READ_PROP(emc_auto_cal_config2, "nvidia,emc-auto-cal-config2")
+ EMC_READ_PROP(emc_auto_cal_config3, "nvidia,emc-auto-cal-config3")
+ EMC_READ_PROP(emc_auto_cal_interval, "nvidia,emc-auto-cal-interval")
+ EMC_READ_PROP(emc_bgbias_ctl0, "nvidia,emc-bgbias-ctl0")
+ EMC_READ_PROP(emc_cfg, "nvidia,emc-cfg")
+ EMC_READ_PROP(emc_cfg_2, "nvidia,emc-cfg-2")
+ EMC_READ_PROP(emc_ctt_term_ctrl, "nvidia,emc-ctt-term-ctrl")
+ EMC_READ_PROP(emc_mode_1, "nvidia,emc-mode-1")
+ EMC_READ_PROP(emc_mode_2, "nvidia,emc-mode-2")
+ EMC_READ_PROP(emc_mode_4, "nvidia,emc-mode-4")
+ EMC_READ_PROP(emc_mode_reset, "nvidia,emc-mode-reset")
+ EMC_READ_PROP(emc_mrs_wait_cnt, "nvidia,emc-mrs-wait-cnt")
+ EMC_READ_PROP(emc_sel_dpd_ctrl, "nvidia,emc-sel-dpd-ctrl")
+ EMC_READ_PROP(emc_xm2dqspadctrl2, "nvidia,emc-xm2dqspadctrl2")
+ EMC_READ_PROP(emc_zcal_cnt_long, "nvidia,emc-zcal-cnt-long")
+ EMC_READ_PROP(emc_zcal_interval, "nvidia,emc-zcal-interval")
+
+#undef EMC_READ_PROP
+
+ return 0;
+}
+
+static int cmp_timings(const void *_a, const void *_b)
+{
+ const struct emc_timing *a = _a;
+ const struct emc_timing *b = _b;
+
+ if (a->rate < b->rate)
+ return -1;
+ else if (a->rate == b->rate)
+ return 0;
+ else
+ return 1;
+}
+
+static int tegra_emc_load_timings_from_dt(struct tegra_emc *emc,
+ struct device_node *node)
+{
+ int child_count = of_get_child_count(node);
+ struct device_node *child;
+ struct emc_timing *timing;
+ unsigned int i = 0;
+ int err;
+
+ emc->timings = devm_kcalloc(emc->dev, child_count, sizeof(*timing),
+ GFP_KERNEL);
+ if (!emc->timings)
+ return -ENOMEM;
+
+ emc->num_timings = child_count;
+
+ for_each_child_of_node(node, child) {
+ timing = &emc->timings[i++];
+
+ err = load_one_timing_from_dt(emc, timing, child);
+ if (err)
+ return err;
+ }
+
+ sort(emc->timings, emc->num_timings, sizeof(*timing), cmp_timings,
+ NULL);
+
+ return 0;
+}
+
+static const struct of_device_id tegra_emc_of_match[] = {
+ { .compatible = "nvidia,tegra124-emc" },
+ {}
+};
+
+static struct device_node *
+tegra_emc_find_node_by_ram_code(struct device_node *node, u32 ram_code)
+{
+ struct device_node *np;
+ int err;
+
+ for_each_child_of_node(node, np) {
+ u32 value;
+
+ err = of_property_read_u32(np, "nvidia,ram-code", &value);
+ if (err || (value != ram_code)) {
+ of_node_put(np);
+ continue;
+ }
+
+ return np;
+ }
+
+ return NULL;
+}
+
+/* Debugfs entry */
+
+static int emc_debug_rate_get(void *data, u64 *rate)
+{
+ struct clk *c = data;
+
+ *rate = clk_get_rate(c);
+
+ return 0;
+}
+
+static int emc_debug_rate_set(void *data, u64 rate)
+{
+ struct clk *c = data;
+
+ return clk_set_rate(c, rate);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(emc_debug_rate_fops, emc_debug_rate_get,
+ emc_debug_rate_set, "%lld\n");
+
+static void emc_debugfs_init(struct device *dev)
+{
+ struct dentry *root, *file;
+ struct clk *clk;
+
+ root = debugfs_create_dir("emc", NULL);
+ if (!root) {
+ dev_err(dev, "failed to create debugfs directory\n");
+ return;
+ }
+
+ clk = clk_get_sys("tegra-clk-debug", "emc");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to get debug clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+
+ file = debugfs_create_file("rate", S_IRUGO | S_IWUSR, root, clk,
+ &emc_debug_rate_fops);
+ if (!file)
+ dev_err(dev, "failed to create debugfs entry\n");
+}
+
+static int tegra_emc_probe(struct platform_device *pdev)
+{
+ struct platform_device *mc;
+ struct device_node *np;
+ struct tegra_emc *emc;
+ struct resource *res;
+ u32 ram_code;
+ int err;
+
+ emc = devm_kzalloc(&pdev->dev, sizeof(*emc), GFP_KERNEL);
+ if (!emc)
+ return -ENOMEM;
+
+ emc->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ emc->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(emc->regs))
+ return PTR_ERR(emc->regs);
+
+ np = of_parse_phandle(pdev->dev.of_node, "nvidia,memory-controller", 0);
+ if (!np) {
+ dev_err(&pdev->dev, "could not get memory controller\n");
+ return -ENOENT;
+ }
+
+ mc = of_find_device_by_node(np);
+ if (!mc)
+ return -ENOENT;
+
+ of_node_put(np);
+
+ emc->mc = platform_get_drvdata(mc);
+ if (!emc->mc)
+ return -EPROBE_DEFER;
+
+ ram_code = tegra_read_ram_code();
+
+ np = tegra_emc_find_node_by_ram_code(pdev->dev.of_node, ram_code);
+ if (!np) {
+ dev_err(&pdev->dev,
+ "no memory timings for RAM code %u found in DT\n",
+ ram_code);
+ return -ENOENT;
+ }
+
+ err = tegra_emc_load_timings_from_dt(emc, np);
+
+ of_node_put(np);
+
+ if (err)
+ return err;
+
+ if (emc->num_timings == 0) {
+ dev_err(&pdev->dev,
+ "no memory timings for RAM code %u registered\n",
+ ram_code);
+ return -ENOENT;
+ }
+
+ err = emc_init(emc);
+ if (err) {
+ dev_err(&pdev->dev, "EMC initialization failed: %d\n", err);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, emc);
+
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ emc_debugfs_init(&pdev->dev);
+
+ return 0;
+};
+
+static struct platform_driver tegra_emc_driver = {
+ .probe = tegra_emc_probe,
+ .driver = {
+ .name = "tegra-emc",
+ .of_match_table = tegra_emc_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+
+static int tegra_emc_init(void)
+{
+ return platform_driver_register(&tegra_emc_driver);
+}
+subsys_initcall(tegra_emc_init);
diff --git a/drivers/memory/tegra/tegra124.c b/drivers/memory/tegra/tegra124.c
index 278d40b854c1..966e1557e6f4 100644
--- a/drivers/memory/tegra/tegra124.c
+++ b/drivers/memory/tegra/tegra124.c
@@ -15,6 +15,48 @@
#include "mc.h"
+#define MC_EMEM_ARB_CFG 0x90
+#define MC_EMEM_ARB_OUTSTANDING_REQ 0x94
+#define MC_EMEM_ARB_TIMING_RCD 0x98
+#define MC_EMEM_ARB_TIMING_RP 0x9c
+#define MC_EMEM_ARB_TIMING_RC 0xa0
+#define MC_EMEM_ARB_TIMING_RAS 0xa4
+#define MC_EMEM_ARB_TIMING_FAW 0xa8
+#define MC_EMEM_ARB_TIMING_RRD 0xac
+#define MC_EMEM_ARB_TIMING_RAP2PRE 0xb0
+#define MC_EMEM_ARB_TIMING_WAP2PRE 0xb4
+#define MC_EMEM_ARB_TIMING_R2R 0xb8
+#define MC_EMEM_ARB_TIMING_W2W 0xbc
+#define MC_EMEM_ARB_TIMING_R2W 0xc0
+#define MC_EMEM_ARB_TIMING_W2R 0xc4
+#define MC_EMEM_ARB_DA_TURNS 0xd0
+#define MC_EMEM_ARB_DA_COVERS 0xd4
+#define MC_EMEM_ARB_MISC0 0xd8
+#define MC_EMEM_ARB_MISC1 0xdc
+#define MC_EMEM_ARB_RING1_THROTTLE 0xe0
+
+static const unsigned long tegra124_mc_emem_regs[] = {
+ MC_EMEM_ARB_CFG,
+ MC_EMEM_ARB_OUTSTANDING_REQ,
+ MC_EMEM_ARB_TIMING_RCD,
+ MC_EMEM_ARB_TIMING_RP,
+ MC_EMEM_ARB_TIMING_RC,
+ MC_EMEM_ARB_TIMING_RAS,
+ MC_EMEM_ARB_TIMING_FAW,
+ MC_EMEM_ARB_TIMING_RRD,
+ MC_EMEM_ARB_TIMING_RAP2PRE,
+ MC_EMEM_ARB_TIMING_WAP2PRE,
+ MC_EMEM_ARB_TIMING_R2R,
+ MC_EMEM_ARB_TIMING_W2W,
+ MC_EMEM_ARB_TIMING_R2W,
+ MC_EMEM_ARB_TIMING_W2R,
+ MC_EMEM_ARB_DA_TURNS,
+ MC_EMEM_ARB_DA_COVERS,
+ MC_EMEM_ARB_MISC0,
+ MC_EMEM_ARB_MISC1,
+ MC_EMEM_ARB_RING1_THROTTLE
+};
+
static const struct tegra_mc_client tegra124_mc_clients[] = {
{
.id = 0x00,
@@ -934,29 +976,29 @@ static const struct tegra_mc_client tegra124_mc_clients[] = {
};
static const struct tegra_smmu_swgroup tegra124_swgroups[] = {
- { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
- { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
- { .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
- { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
- { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
- { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
- { .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
- { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
- { .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x274 },
- { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
- { .swgroup = TEGRA_SWGROUP_ISP2, .reg = 0x258 },
- { .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
- { .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
- { .swgroup = TEGRA_SWGROUP_ISP2B, .reg = 0xaa4 },
- { .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
- { .swgroup = TEGRA_SWGROUP_A9AVP, .reg = 0x290 },
- { .swgroup = TEGRA_SWGROUP_GPU, .reg = 0xaac },
- { .swgroup = TEGRA_SWGROUP_SDMMC1A, .reg = 0xa94 },
- { .swgroup = TEGRA_SWGROUP_SDMMC2A, .reg = 0xa98 },
- { .swgroup = TEGRA_SWGROUP_SDMMC3A, .reg = 0xa9c },
- { .swgroup = TEGRA_SWGROUP_SDMMC4A, .reg = 0xaa0 },
- { .swgroup = TEGRA_SWGROUP_VIC, .reg = 0x284 },
- { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
+ { .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
+ { .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
+ { .name = "afi", .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
+ { .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
+ { .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
+ { .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
+ { .name = "msenc", .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
+ { .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
+ { .name = "sata", .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x274 },
+ { .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
+ { .name = "isp2", .swgroup = TEGRA_SWGROUP_ISP2, .reg = 0x258 },
+ { .name = "xusb_host", .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
+ { .name = "xusb_dev", .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
+ { .name = "isp2b", .swgroup = TEGRA_SWGROUP_ISP2B, .reg = 0xaa4 },
+ { .name = "tsec", .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
+ { .name = "a9avp", .swgroup = TEGRA_SWGROUP_A9AVP, .reg = 0x290 },
+ { .name = "gpu", .swgroup = TEGRA_SWGROUP_GPU, .reg = 0xaac },
+ { .name = "sdmmc1a", .swgroup = TEGRA_SWGROUP_SDMMC1A, .reg = 0xa94 },
+ { .name = "sdmmc2a", .swgroup = TEGRA_SWGROUP_SDMMC2A, .reg = 0xa98 },
+ { .name = "sdmmc3a", .swgroup = TEGRA_SWGROUP_SDMMC3A, .reg = 0xa9c },
+ { .name = "sdmmc4a", .swgroup = TEGRA_SWGROUP_SDMMC4A, .reg = 0xaa0 },
+ { .name = "vic", .swgroup = TEGRA_SWGROUP_VIC, .reg = 0x284 },
+ { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
};
#ifdef CONFIG_ARCH_TEGRA_124_SOC
@@ -991,5 +1033,40 @@ const struct tegra_mc_soc tegra124_mc_soc = {
.num_address_bits = 34,
.atom_size = 32,
.smmu = &tegra124_smmu_soc,
+ .emem_regs = tegra124_mc_emem_regs,
+ .num_emem_regs = ARRAY_SIZE(tegra124_mc_emem_regs),
};
#endif /* CONFIG_ARCH_TEGRA_124_SOC */
+
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+static void tegra132_flush_dcache(struct page *page, unsigned long offset,
+ size_t size)
+{
+ void *virt = page_address(page) + offset;
+
+ __flush_dcache_area(virt, size);
+}
+
+static const struct tegra_smmu_ops tegra132_smmu_ops = {
+ .flush_dcache = tegra132_flush_dcache,
+};
+
+static const struct tegra_smmu_soc tegra132_smmu_soc = {
+ .clients = tegra124_mc_clients,
+ .num_clients = ARRAY_SIZE(tegra124_mc_clients),
+ .swgroups = tegra124_swgroups,
+ .num_swgroups = ARRAY_SIZE(tegra124_swgroups),
+ .supports_round_robin_arbitration = true,
+ .supports_request_limit = true,
+ .num_asids = 128,
+ .ops = &tegra132_smmu_ops,
+};
+
+const struct tegra_mc_soc tegra132_mc_soc = {
+ .clients = tegra124_mc_clients,
+ .num_clients = ARRAY_SIZE(tegra124_mc_clients),
+ .num_address_bits = 34,
+ .atom_size = 32,
+ .smmu = &tegra132_smmu_soc,
+};
+#endif /* CONFIG_ARCH_TEGRA_132_SOC */
diff --git a/drivers/memory/tegra/tegra30.c b/drivers/memory/tegra/tegra30.c
index 71fe9376fe53..1abcd8f6f3ba 100644
--- a/drivers/memory/tegra/tegra30.c
+++ b/drivers/memory/tegra/tegra30.c
@@ -918,22 +918,22 @@ static const struct tegra_mc_client tegra30_mc_clients[] = {
};
static const struct tegra_smmu_swgroup tegra30_swgroups[] = {
- { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
- { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
- { .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
- { .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
- { .swgroup = TEGRA_SWGROUP_MPE, .reg = 0x264 },
- { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
- { .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
- { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
- { .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
- { .swgroup = TEGRA_SWGROUP_NV2, .reg = 0x26c },
- { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
- { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
- { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
- { .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x278 },
- { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
- { .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
+ { .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
+ { .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
+ { .name = "epp", .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
+ { .name = "g2", .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
+ { .name = "mpe", .swgroup = TEGRA_SWGROUP_MPE, .reg = 0x264 },
+ { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
+ { .name = "afi", .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
+ { .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
+ { .name = "nv", .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
+ { .name = "nv2", .swgroup = TEGRA_SWGROUP_NV2, .reg = 0x26c },
+ { .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
+ { .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
+ { .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
+ { .name = "sata", .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x278 },
+ { .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
+ { .name = "isp", .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
};
static void tegra30_flush_dcache(struct page *page, unsigned long offset,
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index a01f57c9e34e..ddf8e42c9367 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -25,6 +25,7 @@
const struct of_device_id of_default_bus_match_table[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "simple-mfd", },
#ifdef CONFIG_ARM_AMBA
{ .compatible = "arm,amba-bus", },
#endif /* CONFIG_ARM_AMBA */
diff --git a/drivers/pinctrl/berlin/berlin-bg2.c b/drivers/pinctrl/berlin/berlin-bg2.c
index b467e6e14f8a..274c5535b531 100644
--- a/drivers/pinctrl/berlin/berlin-bg2.c
+++ b/drivers/pinctrl/berlin/berlin-bg2.c
@@ -218,11 +218,11 @@ static const struct berlin_pinctrl_desc berlin2_sysmgr_pinctrl_data = {
static const struct of_device_id berlin2_pinctrl_match[] = {
{
- .compatible = "marvell,berlin2-chip-ctrl",
+ .compatible = "marvell,berlin2-soc-pinctrl",
.data = &berlin2_soc_pinctrl_data
},
{
- .compatible = "marvell,berlin2-system-ctrl",
+ .compatible = "marvell,berlin2-system-pinctrl",
.data = &berlin2_sysmgr_pinctrl_data
},
{}
@@ -233,28 +233,6 @@ static int berlin2_pinctrl_probe(struct platform_device *pdev)
{
const struct of_device_id *match =
of_match_device(berlin2_pinctrl_match, &pdev->dev);
- struct regmap_config *rmconfig;
- struct regmap *regmap;
- struct resource *res;
- void __iomem *base;
-
- rmconfig = devm_kzalloc(&pdev->dev, sizeof(*rmconfig), GFP_KERNEL);
- if (!rmconfig)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- rmconfig->reg_bits = 32,
- rmconfig->val_bits = 32,
- rmconfig->reg_stride = 4,
- rmconfig->max_register = resource_size(res);
-
- regmap = devm_regmap_init_mmio(&pdev->dev, base, rmconfig);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
return berlin_pinctrl_probe(pdev, match->data);
}
diff --git a/drivers/pinctrl/berlin/berlin-bg2cd.c b/drivers/pinctrl/berlin/berlin-bg2cd.c
index a8b98083a031..0cb793a3552a 100644
--- a/drivers/pinctrl/berlin/berlin-bg2cd.c
+++ b/drivers/pinctrl/berlin/berlin-bg2cd.c
@@ -161,11 +161,11 @@ static const struct berlin_pinctrl_desc berlin2cd_sysmgr_pinctrl_data = {
static const struct of_device_id berlin2cd_pinctrl_match[] = {
{
- .compatible = "marvell,berlin2cd-chip-ctrl",
+ .compatible = "marvell,berlin2cd-soc-pinctrl",
.data = &berlin2cd_soc_pinctrl_data
},
{
- .compatible = "marvell,berlin2cd-system-ctrl",
+ .compatible = "marvell,berlin2cd-system-pinctrl",
.data = &berlin2cd_sysmgr_pinctrl_data
},
{}
@@ -176,28 +176,6 @@ static int berlin2cd_pinctrl_probe(struct platform_device *pdev)
{
const struct of_device_id *match =
of_match_device(berlin2cd_pinctrl_match, &pdev->dev);
- struct regmap_config *rmconfig;
- struct regmap *regmap;
- struct resource *res;
- void __iomem *base;
-
- rmconfig = devm_kzalloc(&pdev->dev, sizeof(*rmconfig), GFP_KERNEL);
- if (!rmconfig)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- rmconfig->reg_bits = 32,
- rmconfig->val_bits = 32,
- rmconfig->reg_stride = 4,
- rmconfig->max_register = resource_size(res);
-
- regmap = devm_regmap_init_mmio(&pdev->dev, base, rmconfig);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
return berlin_pinctrl_probe(pdev, match->data);
}
diff --git a/drivers/pinctrl/berlin/berlin-bg2q.c b/drivers/pinctrl/berlin/berlin-bg2q.c
index 65fb8711a42f..a466054a8206 100644
--- a/drivers/pinctrl/berlin/berlin-bg2q.c
+++ b/drivers/pinctrl/berlin/berlin-bg2q.c
@@ -380,11 +380,11 @@ static const struct berlin_pinctrl_desc berlin2q_sysmgr_pinctrl_data = {
static const struct of_device_id berlin2q_pinctrl_match[] = {
{
- .compatible = "marvell,berlin2q-chip-ctrl",
+ .compatible = "marvell,berlin2q-soc-pinctrl",
.data = &berlin2q_soc_pinctrl_data,
},
{
- .compatible = "marvell,berlin2q-system-ctrl",
+ .compatible = "marvell,berlin2q-system-pinctrl",
.data = &berlin2q_sysmgr_pinctrl_data,
},
{}
@@ -395,28 +395,6 @@ static int berlin2q_pinctrl_probe(struct platform_device *pdev)
{
const struct of_device_id *match =
of_match_device(berlin2q_pinctrl_match, &pdev->dev);
- struct regmap_config *rmconfig;
- struct regmap *regmap;
- struct resource *res;
- void __iomem *base;
-
- rmconfig = devm_kzalloc(&pdev->dev, sizeof(*rmconfig), GFP_KERNEL);
- if (!rmconfig)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- rmconfig->reg_bits = 32,
- rmconfig->val_bits = 32,
- rmconfig->reg_stride = 4,
- rmconfig->max_register = resource_size(res);
-
- regmap = devm_regmap_init_mmio(&pdev->dev, base, rmconfig);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
return berlin_pinctrl_probe(pdev, match->data);
}
diff --git a/drivers/pinctrl/berlin/berlin.c b/drivers/pinctrl/berlin/berlin.c
index ddbcd1d7de52..f49580617055 100644
--- a/drivers/pinctrl/berlin/berlin.c
+++ b/drivers/pinctrl/berlin/berlin.c
@@ -11,6 +11,7 @@
*/
#include <linux/io.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -295,13 +296,15 @@ int berlin_pinctrl_probe(struct platform_device *pdev,
const struct berlin_pinctrl_desc *desc)
{
struct device *dev = &pdev->dev;
+ struct device_node *parent_np = of_get_parent(dev->of_node);
struct berlin_pinctrl *pctrl;
struct regmap *regmap;
int ret;
- regmap = dev_get_regmap(&pdev->dev, NULL);
- if (!regmap)
- return -ENODEV;
+ regmap = syscon_node_to_regmap(parent_np);
+ of_node_put(parent_np);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL);
if (!pctrl)
diff --git a/drivers/reset/reset-berlin.c b/drivers/reset/reset-berlin.c
index f8b48a13cf0b..3c922d37255c 100644
--- a/drivers/reset/reset-berlin.c
+++ b/drivers/reset/reset-berlin.c
@@ -11,10 +11,12 @@
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -25,8 +27,7 @@
container_of((p), struct berlin_reset_priv, rcdev)
struct berlin_reset_priv {
- void __iomem *base;
- unsigned int size;
+ struct regmap *regmap;
struct reset_controller_dev rcdev;
};
@@ -37,7 +38,7 @@ static int berlin_reset_reset(struct reset_controller_dev *rcdev,
int offset = id >> 8;
int mask = BIT(id & 0x1f);
- writel(mask, priv->base + offset);
+ regmap_write(priv->regmap, offset, mask);
/* let the reset be effective */
udelay(10);
@@ -52,7 +53,6 @@ static struct reset_control_ops berlin_reset_ops = {
static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
- struct berlin_reset_priv *priv = to_berlin_reset_priv(rcdev);
unsigned offset, bit;
if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
@@ -61,71 +61,53 @@ static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
offset = reset_spec->args[0];
bit = reset_spec->args[1];
- if (offset >= priv->size)
- return -EINVAL;
-
if (bit >= BERLIN_MAX_RESETS)
return -EINVAL;
return (offset << 8) | bit;
}
-static int __berlin_reset_init(struct device_node *np)
+static int berlin2_reset_probe(struct platform_device *pdev)
{
+ struct device_node *parent_np = of_get_parent(pdev->dev.of_node);
struct berlin_reset_priv *priv;
- struct resource res;
- resource_size_t size;
- int ret;
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
- ret = of_address_to_resource(np, 0, &res);
- if (ret)
- goto err;
-
- size = resource_size(&res);
- priv->base = ioremap(res.start, size);
- if (!priv->base) {
- ret = -ENOMEM;
- goto err;
- }
- priv->size = size;
+ priv->regmap = syscon_node_to_regmap(parent_np);
+ of_node_put(parent_np);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
priv->rcdev.owner = THIS_MODULE;
priv->rcdev.ops = &berlin_reset_ops;
- priv->rcdev.of_node = np;
+ priv->rcdev.of_node = pdev->dev.of_node;
priv->rcdev.of_reset_n_cells = 2;
priv->rcdev.of_xlate = berlin_reset_xlate;
reset_controller_register(&priv->rcdev);
return 0;
-
-err:
- kfree(priv);
- return ret;
}
-static const struct of_device_id berlin_reset_of_match[] __initconst = {
- { .compatible = "marvell,berlin2-chip-ctrl" },
- { .compatible = "marvell,berlin2cd-chip-ctrl" },
- { .compatible = "marvell,berlin2q-chip-ctrl" },
+static const struct of_device_id berlin_reset_dt_match[] = {
+ { .compatible = "marvell,berlin2-reset" },
{ },
};
+MODULE_DEVICE_TABLE(of, berlin_reset_dt_match);
+
+static struct platform_driver berlin_reset_driver = {
+ .probe = berlin2_reset_probe,
+ .driver = {
+ .name = "berlin2-reset",
+ .of_match_table = berlin_reset_dt_match,
+ },
+};
+module_platform_driver(berlin_reset_driver);
-static int __init berlin_reset_init(void)
-{
- struct device_node *np;
- int ret;
-
- for_each_matching_node(np, berlin_reset_of_match) {
- ret = __berlin_reset_init(np);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-arch_initcall(berlin_reset_init);
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Marvell Berlin reset driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index d8bde82f0370..96ddecb92254 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -2,6 +2,7 @@ menu "SOC (System On Chip) specific Drivers"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
+source "drivers/soc/sunxi/Kconfig"
source "drivers/soc/ti/Kconfig"
source "drivers/soc/versatile/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 70042b259744..7dc7c0d8a2c1 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_QCOM) += qcom/
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_SOC_TI) += ti/
obj-$(CONFIG_PLAT_VERSATILE) += versatile/
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 460b2dba109c..5eea374c8fa6 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -10,3 +10,10 @@ config QCOM_GSBI
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
+config QCOM_PM
+ bool "Qualcomm Power Management"
+ depends on ARCH_QCOM && !ARM64
+ help
+ QCOM Platform specific power driver to manage cores and L2 low power
+ modes. It interface with various system drivers to put the cores in
+ low power modes.
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 438901257ac1..931d385386c5 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
+obj-$(CONFIG_QCOM_PM) += spm.o
diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
new file mode 100644
index 000000000000..b562af816c0a
--- /dev/null
+++ b/drivers/soc/qcom/spm.c
@@ -0,0 +1,385 @@
+/*
+ * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014,2015, Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/qcom_scm.h>
+
+#include <asm/cpuidle.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+
+#define MAX_PMIC_DATA 2
+#define MAX_SEQ_DATA 64
+#define SPM_CTL_INDEX 0x7f
+#define SPM_CTL_INDEX_SHIFT 4
+#define SPM_CTL_EN BIT(0)
+
+enum pm_sleep_mode {
+ PM_SLEEP_MODE_STBY,
+ PM_SLEEP_MODE_RET,
+ PM_SLEEP_MODE_SPC,
+ PM_SLEEP_MODE_PC,
+ PM_SLEEP_MODE_NR,
+};
+
+enum spm_reg {
+ SPM_REG_CFG,
+ SPM_REG_SPM_CTL,
+ SPM_REG_DLY,
+ SPM_REG_PMIC_DLY,
+ SPM_REG_PMIC_DATA_0,
+ SPM_REG_PMIC_DATA_1,
+ SPM_REG_VCTL,
+ SPM_REG_SEQ_ENTRY,
+ SPM_REG_SPM_STS,
+ SPM_REG_PMIC_STS,
+ SPM_REG_NR,
+};
+
+struct spm_reg_data {
+ const u8 *reg_offset;
+ u32 spm_cfg;
+ u32 spm_dly;
+ u32 pmic_dly;
+ u32 pmic_data[MAX_PMIC_DATA];
+ u8 seq[MAX_SEQ_DATA];
+ u8 start_index[PM_SLEEP_MODE_NR];
+};
+
+struct spm_driver_data {
+ void __iomem *reg_base;
+ const struct spm_reg_data *reg_data;
+};
+
+static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
+ [SPM_REG_CFG] = 0x08,
+ [SPM_REG_SPM_CTL] = 0x30,
+ [SPM_REG_DLY] = 0x34,
+ [SPM_REG_SEQ_ENTRY] = 0x80,
+};
+
+/* SPM register data for 8974, 8084 */
+static const struct spm_reg_data spm_reg_8974_8084_cpu = {
+ .reg_offset = spm_reg_offset_v2_1,
+ .spm_cfg = 0x1,
+ .spm_dly = 0x3C102800,
+ .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03,
+ 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30,
+ 0x0F },
+ .start_index[PM_SLEEP_MODE_STBY] = 0,
+ .start_index[PM_SLEEP_MODE_SPC] = 3,
+};
+
+static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
+ [SPM_REG_CFG] = 0x08,
+ [SPM_REG_SPM_CTL] = 0x20,
+ [SPM_REG_PMIC_DLY] = 0x24,
+ [SPM_REG_PMIC_DATA_0] = 0x28,
+ [SPM_REG_PMIC_DATA_1] = 0x2C,
+ [SPM_REG_SEQ_ENTRY] = 0x80,
+};
+
+/* SPM register data for 8064 */
+static const struct spm_reg_data spm_reg_8064_cpu = {
+ .reg_offset = spm_reg_offset_v1_1,
+ .spm_cfg = 0x1F,
+ .pmic_dly = 0x02020004,
+ .pmic_data[0] = 0x0084009C,
+ .pmic_data[1] = 0x00A4001C,
+ .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,
+ 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F },
+ .start_index[PM_SLEEP_MODE_STBY] = 0,
+ .start_index[PM_SLEEP_MODE_SPC] = 2,
+};
+
+static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv);
+
+typedef int (*idle_fn)(int);
+static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops);
+
+static inline void spm_register_write(struct spm_driver_data *drv,
+ enum spm_reg reg, u32 val)
+{
+ if (drv->reg_data->reg_offset[reg])
+ writel_relaxed(val, drv->reg_base +
+ drv->reg_data->reg_offset[reg]);
+}
+
+/* Ensure a guaranteed write, before return */
+static inline void spm_register_write_sync(struct spm_driver_data *drv,
+ enum spm_reg reg, u32 val)
+{
+ u32 ret;
+
+ if (!drv->reg_data->reg_offset[reg])
+ return;
+
+ do {
+ writel_relaxed(val, drv->reg_base +
+ drv->reg_data->reg_offset[reg]);
+ ret = readl_relaxed(drv->reg_base +
+ drv->reg_data->reg_offset[reg]);
+ if (ret == val)
+ break;
+ cpu_relax();
+ } while (1);
+}
+
+static inline u32 spm_register_read(struct spm_driver_data *drv,
+ enum spm_reg reg)
+{
+ return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]);
+}
+
+static void spm_set_low_power_mode(struct spm_driver_data *drv,
+ enum pm_sleep_mode mode)
+{
+ u32 start_index;
+ u32 ctl_val;
+
+ start_index = drv->reg_data->start_index[mode];
+
+ ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL);
+ ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT);
+ ctl_val |= start_index << SPM_CTL_INDEX_SHIFT;
+ ctl_val |= SPM_CTL_EN;
+ spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val);
+}
+
+static int qcom_pm_collapse(unsigned long int unused)
+{
+ qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON);
+
+ /*
+ * Returns here only if there was a pending interrupt and we did not
+ * power down as a result.
+ */
+ return -1;
+}
+
+static int qcom_cpu_spc(int cpu)
+{
+ int ret;
+ struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu);
+
+ spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);
+ ret = cpu_suspend(0, qcom_pm_collapse);
+ /*
+ * ARM common code executes WFI without calling into our driver and
+ * if the SPM mode is not reset, then we may accidently power down the
+ * cpu when we intended only to gate the cpu clock.
+ * Ensure the state is set to standby before returning.
+ */
+ spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
+
+ return ret;
+}
+
+static int qcom_idle_enter(int cpu, unsigned long index)
+{
+ return per_cpu(qcom_idle_ops, cpu)[index](cpu);
+}
+
+static const struct of_device_id qcom_idle_state_match[] __initconst = {
+ { .compatible = "qcom,idle-state-spc", .data = qcom_cpu_spc },
+ { },
+};
+
+static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
+{
+ const struct of_device_id *match_id;
+ struct device_node *state_node;
+ int i;
+ int state_count = 1;
+ idle_fn idle_fns[CPUIDLE_STATE_MAX];
+ idle_fn *fns;
+ cpumask_t mask;
+ bool use_scm_power_down = false;
+
+ for (i = 0; ; i++) {
+ state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+ if (!state_node)
+ break;
+
+ if (!of_device_is_available(state_node))
+ continue;
+
+ if (i == CPUIDLE_STATE_MAX) {
+ pr_warn("%s: cpuidle states reached max possible\n",
+ __func__);
+ break;
+ }
+
+ match_id = of_match_node(qcom_idle_state_match, state_node);
+ if (!match_id)
+ return -ENODEV;
+
+ idle_fns[state_count] = match_id->data;
+
+ /* Check if any of the states allow power down */
+ if (match_id->data == qcom_cpu_spc)
+ use_scm_power_down = true;
+
+ state_count++;
+ }
+
+ if (state_count == 1)
+ goto check_spm;
+
+ fns = devm_kcalloc(get_cpu_device(cpu), state_count, sizeof(*fns),
+ GFP_KERNEL);
+ if (!fns)
+ return -ENOMEM;
+
+ for (i = 1; i < state_count; i++)
+ fns[i] = idle_fns[i];
+
+ if (use_scm_power_down) {
+ /* We have atleast one power down mode */
+ cpumask_clear(&mask);
+ cpumask_set_cpu(cpu, &mask);
+ qcom_scm_set_warm_boot_addr(cpu_resume, &mask);
+ }
+
+ per_cpu(qcom_idle_ops, cpu) = fns;
+
+ /*
+ * SPM probe for the cpu should have happened by now, if the
+ * SPM device does not exist, return -ENXIO to indicate that the
+ * cpu does not support idle states.
+ */
+check_spm:
+ return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO;
+}
+
+static struct cpuidle_ops qcom_cpuidle_ops __initdata = {
+ .suspend = qcom_idle_enter,
+ .init = qcom_cpuidle_init,
+};
+
+CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v1, "qcom,kpss-acc-v1", &qcom_cpuidle_ops);
+CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v2, "qcom,kpss-acc-v2", &qcom_cpuidle_ops);
+
+static struct spm_driver_data *spm_get_drv(struct platform_device *pdev,
+ int *spm_cpu)
+{
+ struct spm_driver_data *drv = NULL;
+ struct device_node *cpu_node, *saw_node;
+ int cpu;
+ bool found;
+
+ for_each_possible_cpu(cpu) {
+ cpu_node = of_cpu_device_node_get(cpu);
+ if (!cpu_node)
+ continue;
+ saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
+ found = (saw_node == pdev->dev.of_node);
+ of_node_put(saw_node);
+ of_node_put(cpu_node);
+ if (found)
+ break;
+ }
+
+ if (found) {
+ drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
+ if (drv)
+ *spm_cpu = cpu;
+ }
+
+ return drv;
+}
+
+static const struct of_device_id spm_match_table[] = {
+ { .compatible = "qcom,msm8974-saw2-v2.1-cpu",
+ .data = &spm_reg_8974_8084_cpu },
+ { .compatible = "qcom,apq8084-saw2-v2.1-cpu",
+ .data = &spm_reg_8974_8084_cpu },
+ { .compatible = "qcom,apq8064-saw2-v1.1-cpu",
+ .data = &spm_reg_8064_cpu },
+ { },
+};
+
+static int spm_dev_probe(struct platform_device *pdev)
+{
+ struct spm_driver_data *drv;
+ struct resource *res;
+ const struct of_device_id *match_id;
+ void __iomem *addr;
+ int cpu;
+
+ drv = spm_get_drv(pdev, &cpu);
+ if (!drv)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ drv->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(drv->reg_base))
+ return PTR_ERR(drv->reg_base);
+
+ match_id = of_match_node(spm_match_table, pdev->dev.of_node);
+ if (!match_id)
+ return -ENODEV;
+
+ drv->reg_data = match_id->data;
+
+ /* Write the SPM sequences first.. */
+ addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY];
+ __iowrite32_copy(addr, drv->reg_data->seq,
+ ARRAY_SIZE(drv->reg_data->seq) / 4);
+
+ /*
+ * ..and then the control registers.
+ * On some SoC if the control registers are written first and if the
+ * CPU was held in reset, the reset signal could trigger the SPM state
+ * machine, before the sequences are completely written.
+ */
+ spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
+ spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
+ spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
+ spm_register_write(drv, SPM_REG_PMIC_DATA_0,
+ drv->reg_data->pmic_data[0]);
+ spm_register_write(drv, SPM_REG_PMIC_DATA_1,
+ drv->reg_data->pmic_data[1]);
+
+ /* Set up Standby as the default low power mode */
+ spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
+
+ per_cpu(cpu_spm_drv, cpu) = drv;
+
+ return 0;
+}
+
+static struct platform_driver spm_driver = {
+ .probe = spm_dev_probe,
+ .driver = {
+ .name = "saw",
+ .of_match_table = spm_match_table,
+ },
+};
+module_platform_driver(spm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SAW power controller driver");
+MODULE_ALIAS("platform:saw");
diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
new file mode 100644
index 000000000000..353b07e40176
--- /dev/null
+++ b/drivers/soc/sunxi/Kconfig
@@ -0,0 +1,10 @@
+#
+# Allwinner sunXi SoC drivers
+#
+config SUNXI_SRAM
+ bool
+ default ARCH_SUNXI
+ help
+ Say y here to enable the SRAM controller support. This
+ device is responsible on mapping the SRAM in the sunXi SoCs
+ whether to the CPU/DMA, or to the devices.
diff --git a/drivers/soc/sunxi/Makefile b/drivers/soc/sunxi/Makefile
new file mode 100644
index 000000000000..4cf9dbdf346e
--- /dev/null
+++ b/drivers/soc/sunxi/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SUNXI_SRAM) += sunxi_sram.o
diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c
new file mode 100644
index 000000000000..bc52670c8f4b
--- /dev/null
+++ b/drivers/soc/sunxi/sunxi_sram.c
@@ -0,0 +1,284 @@
+/*
+ * Allwinner SoCs SRAM Controller Driver
+ *
+ * Copyright (C) 2015 Maxime Ripard
+ *
+ * Author: Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <linux/soc/sunxi/sunxi_sram.h>
+
+struct sunxi_sram_func {
+ char *func;
+ u8 val;
+};
+
+struct sunxi_sram_data {
+ char *name;
+ u8 reg;
+ u8 offset;
+ u8 width;
+ struct sunxi_sram_func *func;
+ struct list_head list;
+};
+
+struct sunxi_sram_desc {
+ struct sunxi_sram_data data;
+ bool claimed;
+};
+
+#define SUNXI_SRAM_MAP(_val, _func) \
+ { \
+ .func = _func, \
+ .val = _val, \
+ }
+
+#define SUNXI_SRAM_DATA(_name, _reg, _off, _width, ...) \
+ { \
+ .name = _name, \
+ .reg = _reg, \
+ .offset = _off, \
+ .width = _width, \
+ .func = (struct sunxi_sram_func[]){ \
+ __VA_ARGS__, { } }, \
+ }
+
+static struct sunxi_sram_desc sun4i_a10_sram_a3_a4 = {
+ .data = SUNXI_SRAM_DATA("A3-A4", 0x4, 0x4, 2,
+ SUNXI_SRAM_MAP(0, "cpu"),
+ SUNXI_SRAM_MAP(1, "emac")),
+};
+
+static struct sunxi_sram_desc sun4i_a10_sram_d = {
+ .data = SUNXI_SRAM_DATA("D", 0x4, 0x0, 1,
+ SUNXI_SRAM_MAP(0, "cpu"),
+ SUNXI_SRAM_MAP(1, "usb-otg")),
+};
+
+static const struct of_device_id sunxi_sram_dt_ids[] = {
+ {
+ .compatible = "allwinner,sun4i-a10-sram-a3-a4",
+ .data = &sun4i_a10_sram_a3_a4.data,
+ },
+ {
+ .compatible = "allwinner,sun4i-a10-sram-d",
+ .data = &sun4i_a10_sram_d.data,
+ },
+ {}
+};
+
+static struct device *sram_dev;
+static LIST_HEAD(claimed_sram);
+static DEFINE_SPINLOCK(sram_lock);
+static void __iomem *base;
+
+static int sunxi_sram_show(struct seq_file *s, void *data)
+{
+ struct device_node *sram_node, *section_node;
+ const struct sunxi_sram_data *sram_data;
+ const struct of_device_id *match;
+ struct sunxi_sram_func *func;
+ const __be32 *sram_addr_p, *section_addr_p;
+ u32 val;
+
+ seq_puts(s, "Allwinner sunXi SRAM\n");
+ seq_puts(s, "--------------------\n\n");
+
+ for_each_child_of_node(sram_dev->of_node, sram_node) {
+ sram_addr_p = of_get_address(sram_node, 0, NULL, NULL);
+
+ seq_printf(s, "sram@%08x\n",
+ be32_to_cpu(*sram_addr_p));
+
+ for_each_child_of_node(sram_node, section_node) {
+ match = of_match_node(sunxi_sram_dt_ids, section_node);
+ if (!match)
+ continue;
+ sram_data = match->data;
+
+ section_addr_p = of_get_address(section_node, 0,
+ NULL, NULL);
+
+ seq_printf(s, "\tsection@%04x\t(%s)\n",
+ be32_to_cpu(*section_addr_p),
+ sram_data->name);
+
+ val = readl(base + sram_data->reg);
+ val >>= sram_data->offset;
+ val &= sram_data->width;
+
+ for (func = sram_data->func; func->func; func++) {
+ seq_printf(s, "\t\t%s%c\n", func->func,
+ func->val == val ? '*' : ' ');
+ }
+ }
+
+ seq_puts(s, "\n");
+ }
+
+ return 0;
+}
+
+static int sunxi_sram_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, sunxi_sram_show, inode->i_private);
+}
+
+static const struct file_operations sunxi_sram_fops = {
+ .open = sunxi_sram_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static inline struct sunxi_sram_desc *to_sram_desc(const struct sunxi_sram_data *data)
+{
+ return container_of(data, struct sunxi_sram_desc, data);
+}
+
+static const struct sunxi_sram_data *sunxi_sram_of_parse(struct device_node *node,
+ unsigned int *value)
+{
+ const struct of_device_id *match;
+ struct of_phandle_args args;
+ int ret;
+
+ ret = of_parse_phandle_with_fixed_args(node, "allwinner,sram", 1, 0,
+ &args);
+ if (ret)
+ return ERR_PTR(ret);
+
+ if (!of_device_is_available(args.np)) {
+ ret = -EBUSY;
+ goto err;
+ }
+
+ if (value)
+ *value = args.args[0];
+
+ match = of_match_node(sunxi_sram_dt_ids, args.np);
+ if (!match) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ of_node_put(args.np);
+ return match->data;
+
+err:
+ of_node_put(args.np);
+ return ERR_PTR(ret);
+}
+
+int sunxi_sram_claim(struct device *dev)
+{
+ const struct sunxi_sram_data *sram_data;
+ struct sunxi_sram_desc *sram_desc;
+ unsigned int device;
+ u32 val, mask;
+
+ if (IS_ERR(base))
+ return -EPROBE_DEFER;
+
+ if (!dev || !dev->of_node)
+ return -EINVAL;
+
+ sram_data = sunxi_sram_of_parse(dev->of_node, &device);
+ if (IS_ERR(sram_data))
+ return PTR_ERR(sram_data);
+
+ sram_desc = to_sram_desc(sram_data);
+
+ spin_lock(&sram_lock);
+
+ if (sram_desc->claimed) {
+ spin_unlock(&sram_lock);
+ return -EBUSY;
+ }
+
+ mask = GENMASK(sram_data->offset + sram_data->width, sram_data->offset);
+ val = readl(base + sram_data->reg);
+ val &= ~mask;
+ writel(val | ((device << sram_data->offset) & mask),
+ base + sram_data->reg);
+
+ spin_unlock(&sram_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(sunxi_sram_claim);
+
+int sunxi_sram_release(struct device *dev)
+{
+ const struct sunxi_sram_data *sram_data;
+ struct sunxi_sram_desc *sram_desc;
+
+ if (!dev || !dev->of_node)
+ return -EINVAL;
+
+ sram_data = sunxi_sram_of_parse(dev->of_node, NULL);
+ if (IS_ERR(sram_data))
+ return -EINVAL;
+
+ sram_desc = to_sram_desc(sram_data);
+
+ spin_lock(&sram_lock);
+ sram_desc->claimed = false;
+ spin_unlock(&sram_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(sunxi_sram_release);
+
+static int sunxi_sram_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct dentry *d;
+
+ sram_dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+
+ d = debugfs_create_file("sram", S_IRUGO, NULL, NULL,
+ &sunxi_sram_fops);
+ if (!d)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static const struct of_device_id sunxi_sram_dt_match[] = {
+ { .compatible = "allwinner,sun4i-a10-sram-controller" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sunxi_sram_dt_match);
+
+static struct platform_driver sunxi_sram_driver = {
+ .driver = {
+ .name = "sunxi-sram",
+ .of_match_table = sunxi_sram_dt_match,
+ },
+ .probe = sunxi_sram_probe,
+};
+module_platform_driver(sunxi_sram_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner sunXi SRAM Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/tegra/fuse/tegra-apbmisc.c b/drivers/soc/tegra/fuse/tegra-apbmisc.c
index 3bf5aba4caaa..73fad05d8f2c 100644
--- a/drivers/soc/tegra/fuse/tegra-apbmisc.c
+++ b/drivers/soc/tegra/fuse/tegra-apbmisc.c
@@ -28,8 +28,15 @@
#define APBMISC_SIZE 0x64
#define FUSE_SKU_INFO 0x10
+#define PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT 4
+#define PMC_STRAPPING_OPT_A_RAM_CODE_MASK_LONG \
+ (0xf << PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT)
+#define PMC_STRAPPING_OPT_A_RAM_CODE_MASK_SHORT \
+ (0x3 << PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT)
+
static void __iomem *apbmisc_base;
static void __iomem *strapping_base;
+static bool long_ram_code;
u32 tegra_read_chipid(void)
{
@@ -54,6 +61,18 @@ u32 tegra_read_straps(void)
return 0;
}
+u32 tegra_read_ram_code(void)
+{
+ u32 straps = tegra_read_straps();
+
+ if (long_ram_code)
+ straps &= PMC_STRAPPING_OPT_A_RAM_CODE_MASK_LONG;
+ else
+ straps &= PMC_STRAPPING_OPT_A_RAM_CODE_MASK_SHORT;
+
+ return straps >> PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT;
+}
+
static const struct of_device_id apbmisc_match[] __initconst = {
{ .compatible = "nvidia,tegra20-apbmisc", },
{},
@@ -112,4 +131,6 @@ void __init tegra_init_apbmisc(void)
strapping_base = of_iomap(np, 1);
if (!strapping_base)
pr_err("ioremap tegra strapping_base failed\n");
+
+ long_ram_code = of_property_read_bool(np, "nvidia,long-ram-code");
}
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index d7a974d5f57c..6e7d5ec65838 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
@@ -16,6 +16,17 @@
extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+#define QCOM_SCM_HDCP_MAX_REQ_CNT 5
+
+struct qcom_scm_hdcp_req {
+ u32 addr;
+ u32 val;
+};
+
+extern bool qcom_scm_hdcp_available(void);
+extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+ u32 *resp);
+
#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0
#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1
diff --git a/include/linux/soc/sunxi/sunxi_sram.h b/include/linux/soc/sunxi/sunxi_sram.h
new file mode 100644
index 000000000000..c5f663bba9c2
--- /dev/null
+++ b/include/linux/soc/sunxi/sunxi_sram.h
@@ -0,0 +1,19 @@
+/*
+ * Allwinner SoCs SRAM Controller Driver
+ *
+ * Copyright (C) 2015 Maxime Ripard
+ *
+ * Author: Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _SUNXI_SRAM_H_
+#define _SUNXI_SRAM_H_
+
+int sunxi_sram_claim(struct device *dev);
+int sunxi_sram_release(struct device *dev);
+
+#endif /* _SUNXI_SRAM_H_ */
diff --git a/include/soc/tegra/emc.h b/include/soc/tegra/emc.h
new file mode 100644
index 000000000000..f6db33b579ec
--- /dev/null
+++ b/include/soc/tegra/emc.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2014 NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_TEGRA_EMC_H__
+#define __SOC_TEGRA_EMC_H__
+
+struct tegra_emc;
+
+int tegra_emc_prepare_timing_change(struct tegra_emc *emc,
+ unsigned long rate);
+void tegra_emc_complete_timing_change(struct tegra_emc *emc,
+ unsigned long rate);
+
+#endif /* __SOC_TEGRA_EMC_H__ */
diff --git a/include/soc/tegra/fuse.h b/include/soc/tegra/fuse.h
index b5f7b5f8d008..b019e3465f11 100644
--- a/include/soc/tegra/fuse.h
+++ b/include/soc/tegra/fuse.h
@@ -56,6 +56,7 @@ struct tegra_sku_info {
};
u32 tegra_read_straps(void);
+u32 tegra_read_ram_code(void);
u32 tegra_read_chipid(void);
int tegra_fuse_readl(unsigned long offset, u32 *value);
diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h
index 63deb8d9f82a..1ab2813273cd 100644
--- a/include/soc/tegra/mc.h
+++ b/include/soc/tegra/mc.h
@@ -20,6 +20,12 @@ struct tegra_smmu_enable {
unsigned int bit;
};
+struct tegra_mc_timing {
+ unsigned long rate;
+
+ u32 *emem_data;
+};
+
/* latency allowance */
struct tegra_mc_la {
unsigned int reg;
@@ -40,6 +46,7 @@ struct tegra_mc_client {
};
struct tegra_smmu_swgroup {
+ const char *name;
unsigned int swgroup;
unsigned int reg;
};
@@ -71,6 +78,7 @@ struct tegra_smmu;
struct tegra_smmu *tegra_smmu_probe(struct device *dev,
const struct tegra_smmu_soc *soc,
struct tegra_mc *mc);
+void tegra_smmu_remove(struct tegra_smmu *smmu);
#else
static inline struct tegra_smmu *
tegra_smmu_probe(struct device *dev, const struct tegra_smmu_soc *soc,
@@ -78,13 +86,17 @@ tegra_smmu_probe(struct device *dev, const struct tegra_smmu_soc *soc,
{
return NULL;
}
+
+static inline void tegra_smmu_remove(struct tegra_smmu *smmu)
+{
+}
#endif
struct tegra_mc_soc {
const struct tegra_mc_client *clients;
unsigned int num_clients;
- const unsigned int *emem_regs;
+ const unsigned long *emem_regs;
unsigned int num_emem_regs;
unsigned int num_address_bits;
@@ -102,6 +114,12 @@ struct tegra_mc {
const struct tegra_mc_soc *soc;
unsigned long tick;
+
+ struct tegra_mc_timing *timings;
+ unsigned int num_timings;
};
+void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate);
+unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc);
+
#endif /* __SOC_TEGRA_MC_H__ */