aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBob Liu <lliubbo@gmail.com>2012-07-23 10:47:48 +0800
committerBob Liu <lliubbo@gmail.com>2012-07-24 13:39:49 +0800
commitf82f16d2f55a68a5134e26edbc9303fe8048764f (patch)
tree834e3cec640d2a56958bb5ced476b20a30e99a02
parentbfin-dma: only use MDMA3 on bf609 (diff)
downloadlinux-dev-f82f16d2f55a68a5134e26edbc9303fe8048764f.tar.xz
linux-dev-f82f16d2f55a68a5134e26edbc9303fe8048764f.zip
bfin: reorg clock init steps for bf609
So that user can set the clocks through menuconfig. Signed-off-by: Bob Liu <lliubbo@gmail.com>
-rw-r--r--arch/blackfin/Kconfig5
-rw-r--r--arch/blackfin/include/asm/mem_init.h212
-rw-r--r--arch/blackfin/mach-bf609/include/mach/defBF60x_base.h1
-rw-r--r--arch/blackfin/mach-common/clocks-init.c139
4 files changed, 224 insertions, 133 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 2baa4938d741..f9f6f6971b7e 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -352,6 +352,11 @@ config MEM_MT48H32M16LFCJ_75
depends on (BFIN526_EZBRD)
default y
+config MEM_MT47H64M16
+ bool
+ depends on (BFIN609_EZKIT)
+ default y
+
source "arch/blackfin/mach-bf518/Kconfig"
source "arch/blackfin/mach-bf527/Kconfig"
source "arch/blackfin/mach-bf533/Kconfig"
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index 237579935e29..f019e9bcefe9 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -6,6 +6,9 @@
* Licensed under the GPL-2 or later.
*/
+#ifndef __MEM_INIT_H__
+#define __MEM_INIT_H__
+
#if defined(EBIU_SDGCTL)
#if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
@@ -277,3 +280,212 @@
#else
#define PLL_BYPASS 0
#endif
+
+#ifdef CONFIG_BF60x
+
+/* DMC status bits */
+#define IDLE 0x1
+#define MEMINITDONE 0x4
+#define SRACK 0x8
+#define PDACK 0x10
+#define DPDACK 0x20
+#define DLLCALDONE 0x2000
+#define PENDREF 0xF0000
+#define PHYRDPHASE 0xF00000
+#define PHYRDPHASE_OFFSET 20
+
+/* DMC control bits */
+#define LPDDR 0x2
+#define INIT 0x4
+#define SRREQ 0x8
+#define PDREQ 0x10
+#define DPDREQ 0x20
+#define PREC 0x40
+#define ADDRMODE 0x100
+#define RDTOWR 0xE00
+#define PPREF 0x1000
+#define DLLCAL 0x2000
+
+/* DMC DLL control bits */
+#define DLLCALRDCNT 0xFF
+#define DATACYC 0xF00
+#define DATACYC_OFFSET 8
+
+/* CGU Divisor bits */
+#define CSEL_OFFSET 0
+#define S0SEL_OFFSET 5
+#define SYSSEL_OFFSET 8
+#define S1SEL_OFFSET 13
+#define DSEL_OFFSET 16
+#define OSEL_OFFSET 22
+#define ALGN 0x20000000
+#define UPDT 0x40000000
+#define LOCK 0x80000000
+
+/* CGU Status bits */
+#define PLLEN 0x1
+#define PLLBP 0x2
+#define PLOCK 0x4
+#define CLKSALGN 0x8
+
+/* CGU Control bits */
+#define MSEL_MASK 0x7F00
+#define DF_MASK 0x1
+
+struct ddr_config {
+ u32 ddr_clk;
+ u32 dmc_ddrctl;
+ u32 dmc_ddrcfg;
+ u32 dmc_ddrtr0;
+ u32 dmc_ddrtr1;
+ u32 dmc_ddrtr2;
+ u32 dmc_ddrmr;
+ u32 dmc_ddrmr1;
+};
+
+#if defined(CONFIG_MEM_MT47H64M16)
+static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = {
+ [0] = {
+ .ddr_clk = 125,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20705212,
+ .dmc_ddrtr1 = 0x201003CF,
+ .dmc_ddrtr2 = 0x00320107,
+ .dmc_ddrmr = 0x00000422,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [1] = {
+ .ddr_clk = 133,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20806313,
+ .dmc_ddrtr1 = 0x2013040D,
+ .dmc_ddrtr2 = 0x00320108,
+ .dmc_ddrmr = 0x00000632,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [2] = {
+ .ddr_clk = 150,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20A07323,
+ .dmc_ddrtr1 = 0x20160492,
+ .dmc_ddrtr2 = 0x00320209,
+ .dmc_ddrmr = 0x00000632,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [3] = {
+ .ddr_clk = 166,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20A07323,
+ .dmc_ddrtr1 = 0x2016050E,
+ .dmc_ddrtr2 = 0x00320209,
+ .dmc_ddrmr = 0x00000632,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [4] = {
+ .ddr_clk = 200,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20a07323,
+ .dmc_ddrtr1 = 0x2016050f,
+ .dmc_ddrtr2 = 0x00320509,
+ .dmc_ddrmr = 0x00000632,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [5] = {
+ .ddr_clk = 225,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20E0A424,
+ .dmc_ddrtr1 = 0x302006DB,
+ .dmc_ddrtr2 = 0x0032020D,
+ .dmc_ddrmr = 0x00000842,
+ .dmc_ddrmr1 = 0x4,
+ },
+ [6] = {
+ .ddr_clk = 250,
+ .dmc_ddrctl = 0x00000904,
+ .dmc_ddrcfg = 0x00000422,
+ .dmc_ddrtr0 = 0x20E0A424,
+ .dmc_ddrtr1 = 0x3020079E,
+ .dmc_ddrtr2 = 0x0032020D,
+ .dmc_ddrmr = 0x00000842,
+ .dmc_ddrmr1 = 0x4,
+ },
+};
+#endif
+
+static inline void dmc_enter_self_refresh(void)
+{
+ if (bfin_read_DMC0_STAT() & MEMINITDONE) {
+ bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() | SRREQ);
+ while (!(bfin_read_DMC0_STAT() & SRACK))
+ continue;
+ }
+}
+
+static inline void dmc_exit_self_refresh(void)
+{
+ if (bfin_read_DMC0_STAT() & MEMINITDONE) {
+ bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() & ~SRREQ);
+ while (bfin_read_DMC0_STAT() & SRACK)
+ continue;
+ }
+}
+
+static inline void init_cgu(u32 cgu_div, u32 cgu_ctl)
+{
+ dmc_enter_self_refresh();
+
+ /* Don't set the same value of MSEL and DF to CGU_CTL */
+ if ((bfin_read32(CGU0_CTL) & (MSEL_MASK | DF_MASK))
+ != cgu_ctl) {
+ bfin_write32(CGU0_DIV, cgu_div);
+ bfin_write32(CGU0_CTL, cgu_ctl);
+ while ((bfin_read32(CGU0_STAT) & (CLKSALGN | PLLBP)) ||
+ !(bfin_read32(CGU0_STAT) & PLOCK))
+ continue;
+ }
+
+ bfin_write32(CGU0_DIV, cgu_div | UPDT);
+ while (bfin_read32(CGU0_STAT) & CLKSALGN)
+ continue;
+
+ dmc_exit_self_refresh();
+}
+
+static inline void init_dmc(u32 dmc_clk)
+{
+ int i, dlldatacycle, dll_ctl;
+
+ for (i = 0; i < 7; i++) {
+ if (ddr_config_table[i].ddr_clk == dmc_clk) {
+ bfin_write_DMC0_CFG(ddr_config_table[i].dmc_ddrcfg);
+ bfin_write_DMC0_TR0(ddr_config_table[i].dmc_ddrtr0);
+ bfin_write_DMC0_TR1(ddr_config_table[i].dmc_ddrtr1);
+ bfin_write_DMC0_TR2(ddr_config_table[i].dmc_ddrtr2);
+ bfin_write_DMC0_MR(ddr_config_table[i].dmc_ddrmr);
+ bfin_write_DMC0_EMR1(ddr_config_table[i].dmc_ddrmr1);
+ bfin_write_DMC0_CTL(ddr_config_table[i].dmc_ddrctl);
+ break;
+ }
+ }
+
+ while (!(bfin_read_DMC0_STAT() & MEMINITDONE))
+ continue;
+
+ dlldatacycle = (bfin_read_DMC0_STAT() & PHYRDPHASE) >> PHYRDPHASE_OFFSET;
+ dll_ctl = bfin_read_DMC0_DLLCTL();
+ dll_ctl &= ~DATACYC;
+ bfin_write_DMC0_DLLCTL(dll_ctl | (dlldatacycle << DATACYC_OFFSET));
+
+ while (!(bfin_read_DMC0_STAT() & DLLCALDONE))
+ continue;
+}
+#endif
+
+#endif /*__MEM_INIT_H__*/
+
diff --git a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
index 6aac38544cc9..f1a6afae1a71 100644
--- a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
+++ b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
@@ -2665,7 +2665,6 @@
#define DEVSZ_1G 0x400 /* DMC External Bank Size = 1Gbit */
#define DEVSZ_2G 0x500 /* DMC External Bank Size = 2Gbit */
-
/* =========================
L2CTL Registers
========================= */
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index 7ad2407d1571..2308ce52f849 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -16,23 +16,14 @@
#include <asm/dpmc.h>
#ifdef CONFIG_BF60x
-#define CSEL_P 0
-#define S0SEL_P 5
-#define SYSSEL_P 8
-#define S1SEL_P 13
-#define DSEL_P 16
-#define OSEL_P 22
-#define ALGN_P 29
-#define UPDT_P 30
-#define LOCK_P 31
#define CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CLKIN_HALF)
#define CGU_DIV_VAL \
- ((CONFIG_CCLK_DIV << CSEL_P) | \
- (CONFIG_SCLK_DIV << SYSSEL_P) | \
- (CONFIG_SCLK0_DIV << S0SEL_P) | \
- (CONFIG_SCLK1_DIV << S1SEL_P) | \
- (CONFIG_DCLK_DIV << DSEL_P))
+ ((CONFIG_CCLK_DIV << CSEL_OFFSET) | \
+ (CONFIG_SCLK_DIV << SYSSEL_OFFSET) | \
+ (CONFIG_SCLK0_DIV << S0SEL_OFFSET) | \
+ (CONFIG_SCLK1_DIV << S1SEL_OFFSET) | \
+ (CONFIG_DCLK_DIV << DSEL_OFFSET))
#define CONFIG_BFIN_DCLK (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_DCLK_DIV) / 1000000)
#if ((CONFIG_BFIN_DCLK != 125) && \
@@ -41,89 +32,7 @@
(CONFIG_BFIN_DCLK != 225) && (CONFIG_BFIN_DCLK != 250))
#error "DCLK must be in (125, 133, 150, 166, 200, 225, 250)MHz"
#endif
-struct ddr_config {
- u32 ddr_clk;
- u32 dmc_ddrctl;
- u32 dmc_ddrcfg;
- u32 dmc_ddrtr0;
- u32 dmc_ddrtr1;
- u32 dmc_ddrtr2;
- u32 dmc_ddrmr;
- u32 dmc_ddrmr1;
-};
-struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = {
- [0] = {
- .ddr_clk = 125,
- .dmc_ddrctl = 0x00000904,
- .dmc_ddrcfg = 0x00000422,
- .dmc_ddrtr0 = 0x20705212,
- .dmc_ddrtr1 = 0x201003CF,
- .dmc_ddrtr2 = 0x00320107,
- .dmc_ddrmr = 0x00000422,
- .dmc_ddrmr1 = 0x4,
- },
- [1] = {
- .ddr_clk = 133,
- .dmc_ddrctl = 0x00000904,
- .dmc_ddrcfg = 0x00000422,
- .dmc_ddrtr0 = 0x20806313,
- .dmc_ddrtr1 = 0x2013040D,
- .dmc_ddrtr2 = 0x00320108,
- .dmc_ddrmr = 0x00000632,
- .dmc_ddrmr1 = 0x4,
- },
- [2] = {
- .ddr_clk = 150,
- .dmc_ddrctl = 0x00000904,
- .dmc_ddrcfg = 0x00000422,
- .dmc_ddrtr0 = 0x20A07323,
- .dmc_ddrtr1 = 0x20160492,
- .dmc_ddrtr2 = 0x00320209,
- .dmc_ddrmr = 0x00000632,
- .dmc_ddrmr1 = 0x4,
- },
- [3] = {
- .ddr_clk = 166,
- .dmc_ddrctl = 0x00000904,
- .dmc_ddrcfg = 0x00000422,
- .dmc_ddrtr0 = 0x20A07323,
- .dmc_ddrtr1 = 0x2016050E,
- .dmc_ddrtr2 = 0x00320209,
- .dmc_ddrmr = 0x00000632,
- .dmc_ddrmr1 = 0x4,
- },
- [4] = {
- .ddr_clk = 200,
- .dmc_ddrctl = 0x00000904,
- .dmc_ddrcfg = 0x00000422,
- .dmc_ddrtr0 = 0x20a07323,
- .dmc_ddrtr1 = 0x2016050f,
- .dmc_ddrtr2 = 0x00320509,
- .dmc_ddrmr = 0x00000632,
- .dmc_ddrmr1 = 0x4,
- },
- [5] = {
- .ddr_clk = 225,
- .dmc_ddrctl = 0x00000904,
- .dmc_ddrcfg = 0x00000422,
- .dmc_ddrtr0 = 0x20E0A424,
- .dmc_ddrtr1 = 0x302006DB,
- .dmc_ddrtr2 = 0x0032020D,
- .dmc_ddrmr = 0x00000842,
- .dmc_ddrmr1 = 0x4,
- },
- [6] = {
- .ddr_clk = 250,
- .dmc_ddrctl = 0x00000904,
- .dmc_ddrcfg = 0x00000422,
- .dmc_ddrtr0 = 0x20E0A424,
- .dmc_ddrtr1 = 0x3020079E,
- .dmc_ddrtr2 = 0x0032020D,
- .dmc_ddrmr = 0x00000842,
- .dmc_ddrmr1 = 0x4,
- },
-};
#else
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
@@ -144,43 +53,9 @@ void init_clocks(void)
* in the middle of reprogramming things, and that'll screw us up.
* For example, any automatic DMAs left by U-Boot for splash screens.
*/
-
#ifdef CONFIG_BF60x
- int i, dlldatacycle, dll_ctl;
- bfin_write32(CGU0_DIV, CGU_DIV_VAL);
- bfin_write32(CGU0_CTL, CGU_CTL_VAL);
- while ((bfin_read32(CGU0_STAT) & 0x8) || !(bfin_read32(CGU0_STAT) & 0x4))
- continue;
-
- bfin_write32(CGU0_DIV, CGU_DIV_VAL | (1 << UPDT_P));
- while (bfin_read32(CGU0_STAT) & (1 << 3))
- continue;
-
- for (i = 0; i < 7; i++) {
- if (ddr_config_table[i].ddr_clk == CONFIG_BFIN_DCLK) {
- bfin_write_DDR0_CFG(ddr_config_table[i].dmc_ddrcfg);
- bfin_write_DDR0_TR0(ddr_config_table[i].dmc_ddrtr0);
- bfin_write_DDR0_TR1(ddr_config_table[i].dmc_ddrtr1);
- bfin_write_DDR0_TR2(ddr_config_table[i].dmc_ddrtr2);
- bfin_write_DDR0_MR(ddr_config_table[i].dmc_ddrmr);
- bfin_write_DDR0_EMR1(ddr_config_table[i].dmc_ddrmr1);
- bfin_write_DDR0_CTL(ddr_config_table[i].dmc_ddrctl);
- break;
- }
- }
-
- do_sync();
- while (!(bfin_read_DDR0_STAT() & 0x4))
- continue;
-
- dlldatacycle = (bfin_read_DDR0_STAT() & 0x00f00000) >> 20;
- dll_ctl = bfin_read_DDR0_DLLCTL();
- dll_ctl &= 0x0ff;
- bfin_write_DDR0_DLLCTL(dll_ctl | (dlldatacycle << 8));
-
- do_sync();
- while (!(bfin_read_DDR0_STAT() & 0x2000))
- continue;
+ init_cgu(CGU_DIV_VAL, CGU_CTL_VAL);
+ init_dmc(CONFIG_BFIN_DCLK);
#else
size_t i;
for (i = 0; i < MAX_DMA_CHANNELS; ++i) {