Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Antonio Quartulli says:

====================
this is another batch intended for net-next/linux-3.13.

This pull request is a bit bigger than usual, but 6 patches are very small
(three of them are about email updates)..

Patch 1 is fixing a previous merge conflict resolution that went wrong
(I realised that only now while checking other patches..).
Patches from 2 to 4 that are updating our emails in all the proper files
(Documentation/, headers and MAINTAINERS).

Patches 5, 6 and 7 are bringing a big improvement to the TranslationTable
component: it is now able to group non-mesh clients based on the VLAN they
belong to. In this way a lot a new enhancements are now possible thanks to the
fact that each batman-adv behaviour can be applied on a per VLAN basis.

And, of course, in patches from 8 to 12 you have some of the enhancements I was
talking about:
- make the batman-Gateway selection VLAN dependent
- make DAT (Distributed ARP Table) group ARP entries on a VLAN basis (this
  allows DAT to work even when the admin decided to use the same IP subnet on
  different VLANs)
- make the AP-Isolation behaviour switchable on each VLAN independently
- export VLAN specific attributes via sysfs. Switches like the AP-Isolation are
  now exported once per VLAN (backward compatibility of the sysfs interface has
  been preserved)

Patches 13 and 14 are small code cleanups.
Patch 15 is a minor improvement in the TT locking mechanism.

Patches 16 and 17 are other enhancements to the TT component. Those allow a
node to parse a "non-mesh client announcement message" and accept only those
TT entries belonging to certain VLANs.

Patch 18 exploits this parse&accept mechanism to make the Bridge Loop Avoidance
component reject only TT entries connected to the VLAN where it is operating.
Previous to this change, BLA was rejecting all the entries coming from any other
Backbone node, regardless of the VLAN (for more details about how the Bridge
Loop Avoidance works please check [1]).

[1] http://www.open-mesh.org/projects/batman-adv/wiki/Bridge-loop-avoidance-II
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 12 insertions, 11 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
index f00a69b68a25..0baa657b18c4 100644
--- a/Documentation/ABI/testing/sysfs-class-net-mesh
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -1,22 +1,23 @@
 
 What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
 Date:           May 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Indicates whether the batman protocol messages of the
                 mesh <mesh_iface> shall be aggregated or not.
 
-What:           /sys/class/net/<mesh_iface>/mesh/ap_isolation
+What:           /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
 Date:           May 2011
-Contact:        Antonio Quartulli <ordex@autistici.org>
+Contact:        Antonio Quartulli <antonio@meshcoding.com>
 Description:
                 Indicates whether the data traffic going from a
                 wireless client to another wireless client will be
-                silently dropped.
+                silently dropped. <vlan_subdir> is empty when referring
+		to the untagged lan.
 
 What:           /sys/class/net/<mesh_iface>/mesh/bonding
 Date:           June 2010
-Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Contact:        Simon Wunderlich <sw@simonwunderlich.de>
 Description:
                 Indicates whether the data traffic going through the
                 mesh will be sent using multiple interfaces at the
@@ -24,7 +25,7 @@ Description:
 
 What:           /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
 Date:           November 2011
-Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Contact:        Simon Wunderlich <sw@simonwunderlich.de>
 Description:
                 Indicates whether the bridge loop avoidance feature
                 is enabled. This feature detects and avoids loops
@@ -41,21 +42,21 @@ Description:
 
 What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
 Date:           October 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Defines the bandwidth which is propagated by this
                 node if gw_mode was set to 'server'.
 
 What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
 Date:           October 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Defines the state of the gateway features. Can be
                 either 'off', 'client' or 'server'.
 
 What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
 Date:           October 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Defines the selection criteria this node will use
                 to choose a gateway if gw_mode was set to 'client'.
@@ -77,14 +78,14 @@ Description:
 
 What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
 Date:           May 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Defines the interval in milliseconds in which batman
                 sends its protocol messages.
 
 What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
 Date:           Dec 2011
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Defines the routing procotol this mesh instance
                 uses to find the optimal paths through the mesh.