[media] DocBook validation fixes

More validation fixes as reported by xmllint.

There are still three xmllint errors after this remaining regarding SVG file support.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 files changed, 255 insertions, 256 deletions

diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 41cd801f0f0b..93b9c6872e53 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3717,232 +3717,231 @@ interface and may change in the future.</para>
 	    use case involving camera or individually.
 	  </para>
 
-	</section>
 
+          <table pgwide="1" frame="none" id="flash-control-id">
+          <title>Flash Control IDs</title>
+    
+          <tgroup cols="4">
+    	<colspec colname="c1" colwidth="1*" />
+    	<colspec colname="c2" colwidth="6*" />
+    	<colspec colname="c3" colwidth="2*" />
+    	<colspec colname="c4" colwidth="6*" />
+    	<spanspec namest="c1" nameend="c2" spanname="id" />
+    	<spanspec namest="c2" nameend="c4" spanname="descr" />
+    	<thead>
+    	  <row>
+    	    <entry spanname="id" align="left">ID</entry>
+    	    <entry align="left">Type</entry>
+    	  </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+    	  </row>
+    	</thead>
+    	<tbody valign="top">
+    	  <row><entry></entry></row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_CLASS</constant></entry>
+    	    <entry>class</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">The FLASH class descriptor.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_LED_MODE</constant></entry>
+    	    <entry>menu</entry>
+    	  </row>
+    	  <row id="v4l2-flash-led-mode">
+    	    <entry spanname="descr">Defines the mode of the flash LED,
+    	    the high-power white LED attached to the flash controller.
+    	    Setting this control may not be possible in presence of
+    	    some faults. See V4L2_CID_FLASH_FAULT.</entry>
+    	  </row>
+    	  <row>
+    	    <entrytbl spanname="descr" cols="2">
+    	      <tbody valign="top">
+    		<row>
+    		  <entry><constant>V4L2_FLASH_LED_MODE_NONE</constant></entry>
+    		  <entry>Off.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_LED_MODE_FLASH</constant></entry>
+    		  <entry>Flash mode.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_LED_MODE_TORCH</constant></entry>
+    		  <entry>Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.</entry>
+    		</row>
+    	      </tbody>
+    	    </entrytbl>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_SOURCE</constant></entry>
+    	    <entry>menu</entry>
+    	  </row>
+    	  <row id="v4l2-flash-strobe-source"><entry
+    	  spanname="descr">Defines the source of the flash LED
+    	  strobe.</entry>
+    	  </row>
+    	  <row>
+    	    <entrytbl spanname="descr" cols="2">
+    	      <tbody valign="top">
+    		<row>
+    		  <entry><constant>V4L2_FLASH_STROBE_SOURCE_SOFTWARE</constant></entry>
+    		  <entry>The flash strobe is triggered by using
+    		  the V4L2_CID_FLASH_STROBE control.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_STROBE_SOURCE_EXTERNAL</constant></entry>
+    		  <entry>The flash strobe is triggered by an
+    		  external source. Typically this is a sensor,
+    		  which makes it possible to synchronises the
+    		  flash strobe start to exposure start.</entry>
+    		</row>
+    	      </tbody>
+    	    </entrytbl>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE</constant></entry>
+    	    <entry>button</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Strobe flash. Valid when
+    	    V4L2_CID_FLASH_LED_MODE is set to
+    	    V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE
+    	    is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this
+    	    control may not be possible in presence of some faults.
+    	    See V4L2_CID_FLASH_FAULT.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STOP</constant></entry>
+    	    <entry>button</entry>
+    	  </row>
+    	  <row><entry spanname="descr">Stop flash strobe immediately.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STATUS</constant></entry>
+    	    <entry>boolean</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Strobe status: whether the flash
+    	    is strobing at the moment or not. This is a read-only
+    	    control.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_TIMEOUT</constant></entry>
+    	    <entry>integer</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Hardware timeout for flash. The
+    	    flash strobe is stopped after this period of time has
+    	    passed from the start of the strobe.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_INTENSITY</constant></entry>
+    	    <entry>integer</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Intensity of the flash strobe when
+    	    the flash LED is in flash mode
+    	    (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps
+    	    (mA) if possible.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_TORCH_INTENSITY</constant></entry>
+    	    <entry>integer</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Intensity of the flash LED in
+    	    torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be
+    	    milliamps (mA) if possible. Setting this control may not
+    	    be possible in presence of some faults. See
+    	    V4L2_CID_FLASH_FAULT.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_INDICATOR_INTENSITY</constant></entry>
+    	    <entry>integer</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Intensity of the indicator LED.
+    	    The indicator LED may be fully independent of the flash
+    	    LED. The unit should be microamps (uA) if possible.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_FAULT</constant></entry>
+    	    <entry>bitmask</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Faults related to the flash. The
+    	    faults tell about specific problems in the flash chip
+    	    itself or the LEDs attached to it. Faults may prevent
+    	    further use of some of the flash controls. In particular,
+    	    V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE
+    	    if the fault affects the flash LED. Exactly which faults
+    	    have such an effect is chip dependent. Reading the faults
+    	    resets the control and returns the chip to a usable state
+    	    if possible.</entry>
+    	  </row>
+    	  <row>
+    	    <entrytbl spanname="descr" cols="2">
+    	      <tbody valign="top">
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_OVER_VOLTAGE</constant></entry>
+    		  <entry>Flash controller voltage to the flash LED
+    		  has exceeded the limit specific to the flash
+    		  controller.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_TIMEOUT</constant></entry>
+    		  <entry>The flash strobe was still on when
+    		  the timeout set by the user ---
+    		  V4L2_CID_FLASH_TIMEOUT control --- has expired.
+    		  Not all flash controllers may set this in all
+    		  such conditions.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_OVER_TEMPERATURE</constant></entry>
+    		  <entry>The flash controller has overheated.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_SHORT_CIRCUIT</constant></entry>
+    		  <entry>The short circuit protection of the flash
+    		  controller has been triggered.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_OVER_CURRENT</constant></entry>
+    		  <entry>Current in the LED power supply has exceeded the limit
+    		  specific to the flash controller.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_INDICATOR</constant></entry>
+    		  <entry>The flash controller has detected a short or open
+    		  circuit condition on the indicator LED.</entry>
+    		</row>
+    	      </tbody>
+    	    </entrytbl>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_CHARGE</constant></entry>
+    	    <entry>boolean</entry>
+    	  </row>
+    	  <row><entry spanname="descr">Enable or disable charging of the xenon
+    	  flash capacitor.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_READY</constant></entry>
+    	    <entry>boolean</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Is the flash ready to strobe?
+    	    Xenon flashes require their capacitors charged before
+    	    strobing. LED flashes often require a cooldown period
+    	    after strobe during which another strobe will not be
+    	    possible. This is a read-only control.</entry>
+    	  </row>
+    	  <row><entry></entry></row>
+    	</tbody>
+          </tgroup>
+          </table>
+	</section>
       </section>
-
-      <table pgwide="1" frame="none" id="flash-control-id">
-      <title>Flash Control IDs</title>
-
-      <tgroup cols="4">
-	<colspec colname="c1" colwidth="1*" />
-	<colspec colname="c2" colwidth="6*" />
-	<colspec colname="c3" colwidth="2*" />
-	<colspec colname="c4" colwidth="6*" />
-	<spanspec namest="c1" nameend="c2" spanname="id" />
-	<spanspec namest="c2" nameend="c4" spanname="descr" />
-	<thead>
-	  <row>
-	    <entry spanname="id" align="left">ID</entry>
-	    <entry align="left">Type</entry>
-	  </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
-	  </row>
-	</thead>
-	<tbody valign="top">
-	  <row><entry></entry></row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_CLASS</constant></entry>
-	    <entry>class</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">The FLASH class descriptor.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_LED_MODE</constant></entry>
-	    <entry>menu</entry>
-	  </row>
-	  <row id="v4l2-flash-led-mode">
-	    <entry spanname="descr">Defines the mode of the flash LED,
-	    the high-power white LED attached to the flash controller.
-	    Setting this control may not be possible in presence of
-	    some faults. See V4L2_CID_FLASH_FAULT.</entry>
-	  </row>
-	  <row>
-	    <entrytbl spanname="descr" cols="2">
-	      <tbody valign="top">
-		<row>
-		  <entry><constant>V4L2_FLASH_LED_MODE_NONE</constant></entry>
-		  <entry>Off.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_LED_MODE_FLASH</constant></entry>
-		  <entry>Flash mode.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_LED_MODE_TORCH</constant></entry>
-		  <entry>Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.</entry>
-		</row>
-	      </tbody>
-	    </entrytbl>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_SOURCE</constant></entry>
-	    <entry>menu</entry>
-	  </row>
-	  <row id="v4l2-flash-strobe-source"><entry
-	  spanname="descr">Defines the source of the flash LED
-	  strobe.</entry>
-	  </row>
-	  <row>
-	    <entrytbl spanname="descr" cols="2">
-	      <tbody valign="top">
-		<row>
-		  <entry><constant>V4L2_FLASH_STROBE_SOURCE_SOFTWARE</constant></entry>
-		  <entry>The flash strobe is triggered by using
-		  the V4L2_CID_FLASH_STROBE control.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_STROBE_SOURCE_EXTERNAL</constant></entry>
-		  <entry>The flash strobe is triggered by an
-		  external source. Typically this is a sensor,
-		  which makes it possible to synchronises the
-		  flash strobe start to exposure start.</entry>
-		</row>
-	      </tbody>
-	    </entrytbl>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE</constant></entry>
-	    <entry>button</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Strobe flash. Valid when
-	    V4L2_CID_FLASH_LED_MODE is set to
-	    V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE
-	    is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this
-	    control may not be possible in presence of some faults.
-	    See V4L2_CID_FLASH_FAULT.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STOP</constant></entry>
-	    <entry>button</entry>
-	  </row>
-	  <row><entry spanname="descr">Stop flash strobe immediately.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STATUS</constant></entry>
-	    <entry>boolean</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Strobe status: whether the flash
-	    is strobing at the moment or not. This is a read-only
-	    control.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_TIMEOUT</constant></entry>
-	    <entry>integer</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Hardware timeout for flash. The
-	    flash strobe is stopped after this period of time has
-	    passed from the start of the strobe.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_INTENSITY</constant></entry>
-	    <entry>integer</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Intensity of the flash strobe when
-	    the flash LED is in flash mode
-	    (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps
-	    (mA) if possible.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_TORCH_INTENSITY</constant></entry>
-	    <entry>integer</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Intensity of the flash LED in
-	    torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be
-	    milliamps (mA) if possible. Setting this control may not
-	    be possible in presence of some faults. See
-	    V4L2_CID_FLASH_FAULT.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_INDICATOR_INTENSITY</constant></entry>
-	    <entry>integer</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Intensity of the indicator LED.
-	    The indicator LED may be fully independent of the flash
-	    LED. The unit should be microamps (uA) if possible.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_FAULT</constant></entry>
-	    <entry>bitmask</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Faults related to the flash. The
-	    faults tell about specific problems in the flash chip
-	    itself or the LEDs attached to it. Faults may prevent
-	    further use of some of the flash controls. In particular,
-	    V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE
-	    if the fault affects the flash LED. Exactly which faults
-	    have such an effect is chip dependent. Reading the faults
-	    resets the control and returns the chip to a usable state
-	    if possible.</entry>
-	  </row>
-	  <row>
-	    <entrytbl spanname="descr" cols="2">
-	      <tbody valign="top">
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_OVER_VOLTAGE</constant></entry>
-		  <entry>Flash controller voltage to the flash LED
-		  has exceeded the limit specific to the flash
-		  controller.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_TIMEOUT</constant></entry>
-		  <entry>The flash strobe was still on when
-		  the timeout set by the user ---
-		  V4L2_CID_FLASH_TIMEOUT control --- has expired.
-		  Not all flash controllers may set this in all
-		  such conditions.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_OVER_TEMPERATURE</constant></entry>
-		  <entry>The flash controller has overheated.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_SHORT_CIRCUIT</constant></entry>
-		  <entry>The short circuit protection of the flash
-		  controller has been triggered.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_OVER_CURRENT</constant></entry>
-		  <entry>Current in the LED power supply has exceeded the limit
-		  specific to the flash controller.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_INDICATOR</constant></entry>
-		  <entry>The flash controller has detected a short or open
-		  circuit condition on the indicator LED.</entry>
-		</row>
-	      </tbody>
-	    </entrytbl>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_CHARGE</constant></entry>
-	    <entry>boolean</entry>
-	  </row>
-	  <row><entry spanname="descr">Enable or disable charging of the xenon
-	  flash capacitor.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_READY</constant></entry>
-	    <entry>boolean</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Is the flash ready to strobe?
-	    Xenon flashes require their capacitors charged before
-	    strobing. LED flashes often require a cooldown period
-	    after strobe during which another strobe will not be
-	    possible. This is a read-only control.</entry>
-	  </row>
-	  <row><entry></entry></row>
-	</tbody>
-      </tgroup>
-      </table>
     </section>
 
     <section id="jpeg-controls">
diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml
index a3d9dd093268..d15aaf83f56f 100644
--- a/Documentation/DocBook/media/v4l/dev-subdev.xml
+++ b/Documentation/DocBook/media/v4l/dev-subdev.xml
@@ -374,29 +374,29 @@
       rectangle --- if it is supported by the hardware.</para>
 
       <orderedlist>
-	<listitem>Sink pad format. The user configures the sink pad
+	<listitem><para>Sink pad format. The user configures the sink pad
 	format. This format defines the parameters of the image the
-	entity receives through the pad for further processing.</listitem>
+	entity receives through the pad for further processing.</para></listitem>
 
-	<listitem>Sink pad actual crop selection. The sink pad crop
-	defines the crop performed to the sink pad format.</listitem>
+	<listitem><para>Sink pad actual crop selection. The sink pad crop
+	defines the crop performed to the sink pad format.</para></listitem>
 
-	<listitem>Sink pad actual compose selection. The size of the
+	<listitem><para>Sink pad actual compose selection. The size of the
 	sink pad compose rectangle defines the scaling ratio compared
 	to the size of the sink pad crop rectangle. The location of
 	the compose rectangle specifies the location of the actual
 	sink compose rectangle in the sink compose bounds
-	rectangle.</listitem>
+	rectangle.</para></listitem>
 
-	<listitem>Source pad actual crop selection. Crop on the source
+	<listitem><para>Source pad actual crop selection. Crop on the source
 	pad defines crop performed to the image in the sink compose
-	bounds rectangle.</listitem>
+	bounds rectangle.</para></listitem>
 
-	<listitem>Source pad format. The source pad format defines the
+	<listitem><para>Source pad format. The source pad format defines the
 	output pixel format of the subdev, as well as the other
 	parameters with the exception of the image width and height.
 	Width and height are defined by the size of the source pad
-	actual crop selection.</listitem>
+	actual crop selection.</para></listitem>
       </orderedlist>
 
       <para>Accessing any of the above rectangles not supported by the
diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
index 8eace3e2e7d4..2d3f0b1aefe0 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml
@@ -22,8 +22,7 @@
 	with 10 bits per colour compressed to 8 bits each, using DPCM
 	compression. DPCM, differential pulse-code modulation, is lossy.
 	Each colour component consumes 8 bits of memory. In other respects
-	this format is similar to <xref
-	linkend="pixfmt-srggb10">.</xref></para>
+	this format is similar to <xref linkend="pixfmt-srggb10" />.</para>
 
       </refsect1>
     </refentry>
diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml
index e7ed5077834d..4c238ce068b0 100644
--- a/Documentation/DocBook/media/v4l/selection-api.xml
+++ b/Documentation/DocBook/media/v4l/selection-api.xml
@@ -40,6 +40,7 @@ cropping and composing rectangles have the same size.</para>
     <section>
       <title>Selection targets</title>
 
+      <para>
       <figure id="sel-targets-capture">
 	<title>Cropping and composing targets</title>
 	<mediaobject>
@@ -52,12 +53,12 @@ cropping and composing rectangles have the same size.</para>
 	  </textobject>
 	</mediaobject>
       </figure>
+      </para>
 
+      <para>See <xref linkend="v4l2-selection-targets" /> for more
+    information.</para>
     </section>
 
-    See <xref linkend="v4l2-selection-targets" /> for more
-    information.
-
   <section>
 
   <title>Configuration</title>
@@ -216,18 +217,17 @@ composing and cropping operations by setting the appropriate targets.  The V4L2
 API lacks any support for composing to and cropping from an image inside a
 memory buffer.  The application could configure a capture device to fill only a
 part of an image by abusing V4L2 API.  Cropping a smaller image from a larger
-one is achieved by setting the field <structfield>
-&v4l2-pix-format;::bytesperline </structfield>.  Introducing an image offsets
-could be done by modifying field <structfield> &v4l2-buffer;::m:userptr
-</structfield> before calling <constant> VIDIOC_QBUF </constant>. Those
+one is achieved by setting the field
+&v4l2-pix-format;<structfield>::bytesperline</structfield>.  Introducing an image offsets
+could be done by modifying field &v4l2-buffer;<structfield>::m_userptr</structfield>
+before calling <constant> VIDIOC_QBUF </constant>. Those
 operations should be avoided because they are not portable (endianness), and do
 not work for macroblock and Bayer formats and mmap buffers.  The selection API
 deals with configuration of buffer cropping/composing in a clear, intuitive and
 portable way.  Next, with the selection API the concepts of the padded target
-and constraints flags are introduced.  Finally, <structname> &v4l2-crop;
-</structname> and <structname> &v4l2-cropcap; </structname> have no reserved
-fields. Therefore there is no way to extend their functionality.  The new
-<structname> &v4l2-selection; </structname> provides a lot of place for future
+and constraints flags are introduced.  Finally, &v4l2-crop; and &v4l2-cropcap;
+have no reserved fields. Therefore there is no way to extend their functionality.
+The new &v4l2-selection; provides a lot of place for future
 extensions.  Driver developers are encouraged to implement only selection API.
 The former cropping API would be simulated using the new one. </para>
 
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
index f76d8a6d9b92..b11ec75e21a1 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
@@ -152,12 +152,10 @@ satisfactory parameters have been negotiated. If constraints flags have to be
 violated at then ERANGE is returned. The error indicates that <emphasis> there
 exist no rectangle </emphasis> that satisfies the constraints.</para>
 
-  </refsect1>
-
   <para>Selection targets and flags are documented in <xref
   linkend="v4l2-selections-common"/>.</para>
 
-    <section>
+    <para>
       <figure id="sel-const-adjust">
 	<title>Size adjustments with constraint flags.</title>
 	<mediaobject>
@@ -170,9 +168,9 @@ exist no rectangle </emphasis> that satisfies the constraints.</para>
 	  </textobject>
 	</mediaobject>
       </figure>
-    </section>
+    </para>
 
-  <refsect1>
+  <para>
     <table pgwide="1" frame="none" id="v4l2-selection">
       <title>struct <structname>v4l2_selection</structname></title>
       <tgroup cols="3">
@@ -208,6 +206,7 @@ exist no rectangle </emphasis> that satisfies the constraints.</para>
 	</tbody>
       </tgroup>
     </table>
+  </para>
   </refsect1>
 
   <refsect1>
diff --git a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml
index 77ff5be0809d..6a821a65a5ae 100644
--- a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml
@@ -155,6 +155,8 @@ or no buffers have been allocated yet, or the
 <structfield>userptr</structfield> or
 <structfield>length</structfield> are invalid.</para>
 	</listitem>
+      </varlistentry>
+      <varlistentry>
 	<term><errorcode>EIO</errorcode></term>
 	<listitem>
 	  <para><constant>VIDIOC_DQBUF</constant> failed due to an
diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
index f33cc814a01d..1ba9e999af3f 100644
--- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
@@ -69,23 +69,22 @@
     more information on how each selection target affects the image
     processing pipeline inside the subdevice.</para>
 
-    <section>
+    <refsect2>
       <title>Types of selection targets</title>
 
       <para>There are two types of selection targets: actual and bounds. The
       actual targets are the targets which configure the hardware. The BOUNDS
       target will return a rectangle that contain all possible actual
       rectangles.</para>
-    </section>
+    </refsect2>
 
-    <section>
+    <refsect2>
       <title>Discovering supported features</title>
 
       <para>To discover which targets are supported, the user can
       perform <constant>VIDIOC_SUBDEV_G_SELECTION</constant> on them.
       Any unsupported target will return
       <constant>EINVAL</constant>.</para>
-    </section>
 
     <para>Selection targets and flags are documented in <xref
     linkend="v4l2-selections-common"/>.</para>
@@ -132,6 +131,7 @@
 	</tbody>
       </tgroup>
     </table>
+    </refsect2>
 
   </refsect1>