Merge tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert)

 - Fix for DMA coherent devices on Power

 - Rework and simplify the DT phandle cache code

 - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART,
   STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC,
   STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010,
   DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks,
   Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI,
   Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM,
   Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI

 - New binding schemas for SATA and PATA controllers, TI and Infineon VR
   controllers, MAX31730

 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt,
   renesas,etheravb-r8a77961

 - Add USB 'super-speed-plus' as a documented speed

 - Vendor prefixes for broadmobi, calaosystems, kam, and mps

 - Clean-up the multiple flavors of ST-Ericsson vendor prefixes

* tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
  scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles"
  of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc
  dt-bindings: leds: Convert gpio-leds to DT schema
  dt-bindings: leds: Convert common LED binding to schema
  dt-bindings: PCI: Convert generic host binding to DT schema
  dt-bindings: PCI: Convert Arm Versatile binding to DT schema
  dt-bindings: Be explicit about installing deps
  dt-bindings: stm32: convert dfsdm to json-schema
  dt-bindings: serial: Convert STM32 UART to json-schema
  dt-bindings: serial: Convert rs485 bindings to json-schema
  dt-bindings: timer: Use non-empty ranges in example
  dt-bindings: arm-boards: typo fix
  dt-bindings: Add TI and Infineon VR Controllers as trivial devices
  dt-binding: usb: add "super-speed-plus"
  dt-bindings: rcar-csi2: Convert bindings to json-schema
  dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
  dt-bindings: Convert Faraday FTIDE010 to DT schema
  dt-bindings: Create DT bindings for PATA controllers
  dt-bindings: Create DT bindings for SATA controllers
  dt: bindings: add vendor prefix for Kamstrup A/S
  ...

1 files changed, 0 insertions, 37 deletions

diff --git a/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt b/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt
deleted file mode 100644
index 2005bb486705..000000000000
--- a/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Allwinner Memory Bus (MBUS) controller
-
-The MBUS controller drives the MBUS that other devices in the SoC will
-use to perform DMA. It also has a register interface that allows to
-monitor and control the bandwidth and priorities for masters on that
-bus.
-
-Required properties:
- - compatible: Must be one of:
-	- allwinner,sun5i-a13-mbus
-	- allwinner,sun8i-h3-mbus
- - reg: Offset and length of the register set for the controller
- - clocks: phandle to the clock driving the controller
- - dma-ranges: See section 2.3.9 of the DeviceTree Specification
- - #interconnect-cells: Must be one, with the argument being the MBUS
-   port ID
-
-Each device having to perform their DMA through the MBUS must have the
-interconnects and interconnect-names properties set to the MBUS
-controller and with "dma-mem" as the interconnect name.
-
-Example:
-
-mbus: dram-controller@1c01000 {
-	compatible = "allwinner,sun5i-a13-mbus";
-	reg = <0x01c01000 0x1000>;
-	clocks = <&ccu CLK_MBUS>;
-	dma-ranges = <0x00000000 0x40000000 0x20000000>;
-	#interconnect-cells = <1>;
-};
-
-fe0: display-frontend@1e00000 {
-	compatible = "allwinner,sun5i-a13-display-frontend";
-	...
-	interconnects = <&mbus 19>;
-	interconnect-names = "dma-mem";
-};