Merge tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64

This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.13. Please note the following from Eric:

I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
patch series, but it does require being careful since it involves a cross-merge
between branches.

- Anup documents the Broadcom Stingray binding, common clocks, adds initial
  support for the Stingray DTSI and DTS files and adds support for the PL022,
  PL330 and SP805

- Sandeep adds the clock nodes to the Stingray Device Tree nodes

- Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes

- Oza adds I2C Device Tree nodes to the Stingray DTSes

- Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC

- Ravijeta adds support for the USB Dual Role PHY on Northstar 2

- Gerd starts adding references to the sdhost and sdhci controllers, and then
  switches the sdcard to to use the SDHOST (faster than SDHCI)

- Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
  thermal driver to work correctly

* tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: NS2: Add USB DRD PHY device tree node
  ARM64: dts: bcm2837: Define CPU thermal coefficients
  arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
  arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
  arm64: dts: Add I2C DT nodes for Stingray SoC
  arm64: dts: Add GPIO DT nodes for Stingray SOC
  arm64: dts: Add pinctrl DT nodes for Stingray SOC
  arm64: dts: Add NAND DT nodes for Stingray SOC
  arm64: dts: Add clock DT nodes for Stingray SOC
  arm64: dts: Initial DTS files for Broadcom Stingray SOC
  dt-bindings: clk: Extend binding doc for Stingray SOC
  dt-bindings: bcm: Add Broadcom Stingray bindings document
  ARM: dts: bcm283x: switch from &sdhci to &sdhost
  arm64: dts: bcm2837: add &sdhci and &sdhost
  ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
  ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 12 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
new file mode 100644
index 000000000000..23a02178dd44
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
@@ -0,0 +1,12 @@
+Broadcom Stingray device tree bindings
+------------------------------------------------
+
+Boards with Stingray shall have the following properties:
+
+Required root node property:
+
+Stingray Combo SVK board
+compatible = "brcm,bcm958742k", "brcm,stingray";
+
+Stingray SST100 board
+compatible = "brcm,bcm958742t", "brcm,stingray";