diff options
| author |   Hauke Mehrtens <hauke@hauke-m.de> | 2014-11-01 16:54:56 +0100 |
|---|---|---|
| committer |   John W. Linville <linville@tuxdriver.com> | 2014-11-11 16:31:11 -0500 |
| commit | 71783576b5345d63df048c0f18974037eea6e4f9 (patch) | |
| tree | a0f6b1c35b415172b6b525276bef359246786b77 /Documentation/devicetree/bindings/bus/bcma.txt | |
| parent | bcma: make it possible to specify a IRQ num in bcma_core_irq() (diff) | |
| download | linux-dev-71783576b5345d63df048c0f18974037eea6e4f9.tar.xz linux-dev-71783576b5345d63df048c0f18974037eea6e4f9.zip | |
bcma: get IRQ numbers from dt
It is not possible to auto detect the irq numbers used by the cores on
an arm SoC. If bcma was registered with device tree it will search for
some device tree nodes with the irq number and add it to the core
configuration.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'Documentation/devicetree/bindings/bus/bcma.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/bus/bcma.txt | 21 |
1 files changed, 21 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/bus/bcma.txt b/Documentation/devicetree/bindings/bus/bcma.txt index 62a48348ac15..edd44d802139 100644 --- a/Documentation/devicetree/bindings/bus/bcma.txt +++ b/Documentation/devicetree/bindings/bus/bcma.txt @@ -8,6 +8,11 @@ Required properties: The cores on the AXI bus are automatically detected by bcma with the memory ranges they are using and they get registered afterwards. +Automatic detection of the IRQ number is not working on +BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide +them manually through device tree. Use an interrupt-map to specify the +IRQ used by the devices on the bus. The first address is just an index, +because we do not have any special register. The top-level axi bus may contain children representing attached cores (devices). This is needed since some hardware details can't be auto @@ -22,6 +27,22 @@ Example: ranges = <0x00000000 0x18000000 0x00100000>; #address-cells = <1>; #size-cells = <1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x000fffff 0xffff>; + interrupt-map = + /* Ethernet Controller 0 */ + <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 1 */ + <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + + /* PCIe Controller 0 */ + <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; chipcommon { reg = <0x00000000 0x1000>; |