Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Here's the main drm pull request for 4.7, it's been a busy one, and
  I've been a bit more distracted in real life this merge window.  Lots
  more ARM drivers, not sure if it'll ever end.  I think I've at least
  one more coming the next merge window.

  But changes are all over the place, support for AMD Polaris GPUs is in
  here, some missing GM108 support for nouveau (found in some Lenovos),
  a bunch of MST and skylake fixes.

  I've also noticed a few fixes from Arnd in my inbox, that I'll try and
  get in asap, but I didn't think they should hold this up.

  New drivers:
   - Hisilicon kirin display driver
   - Mediatek MT8173 display driver
   - ARC PGU - bitstreamer on Synopsys ARC SDP boards
   - Allwinner A13 initial RGB output driver
   - Analogix driver for DisplayPort IP found in exynos and rockchip

  DRM Core:
   - UAPI headers fixes and C++ safety
   - DRM connector reference counting
   - DisplayID mode parsing for Dell 5K monitors
   - Removal of struct_mutex from drivers
   - Connector registration cleanups
   - MST robustness fixes
   - MAINTAINERS updates
   - Lockless GEM object freeing
   - Generic fbdev deferred IO support

  panel:
   - Support for a bunch of new panels

  i915:
   - VBT refactoring
   - PLL computation cleanups
   - DSI support for BXT
   - Color manager support
   - More atomic patches
   - GEM improvements
   - GuC fw loading fixes
   - DP detection fixes
   - SKL GPU hang fixes
   - Lots of BXT fixes

  radeon/amdgpu:
   - Initial Polaris support
   - GPUVM/Scheduler/Clock/Power improvements
   - ASYNC pageflip support
   - New mesa feature support

  nouveau:
   - GM108 support
   - Power sensor support improvements
   - GR init + ucode fixes.
   - Use GPU provided topology information

  vmwgfx:
   - Add host messaging support

  gma500:
   - Some cleanups and fixes

  atmel:
   - Bridge support
   - Async atomic commit support

  fsl-dcu:
   - Timing controller for LCD support
   - Pixel clock polarity support

  rcar-du:
   - Misc fixes

  exynos:
   - Pipeline clock support
   - Exynoss4533 SoC support
   - HW trigger mode support
   - export HDMI_PHY clock
   - DECON5433 fixes
   - Use generic prime functions
   - use DMA mapping APIs

  rockchip:
   - Lots of little fixes

  vc4:
   - Render node support
   - Gamma ramp support
   - DPI output support

  msm:
   - Mostly cleanups and fixes
   - Conversion to generic struct fence

  etnaviv:
   - Fix for prime buffer handling
   - Allow hangcheck to be coalesced with other wakeups

  tegra:
   - Gamme table size fix"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits)
  drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)
  drm/edid: move displayid validation to it's own function.
  drm/displayid: Iterate over all DisplayID blocks
  drm/edid: move displayid tiled block parsing into separate function.
  drm: Nuke ->vblank_disable_allowed
  drm/vmwgfx: Report vmwgfx version to vmware.log
  drm/vmwgfx: Add VMWare host messaging capability
  drm/vmwgfx: Kill some lockdep warnings
  drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
  drm/nouveau/core: recognise GM108 chipsets
  drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
  drm/nouveau/gr/gk104-: share implementation of ppc exception init
  drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx
  drm/nouveau/bios/pll: check BIT table version before trying to parse it
  drm/nouveau/bios/pll: prevent oops when limits table can't be parsed
  drm/nouveau/volt/gk104: round up in gk104_volt_set
  drm/nouveau/fb/gm200: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gf100-: allocate mmu debug buffers
  drm/nouveau/fb: allow chipset-specific actions for oneinit()
  ...

20 files changed, 1027 insertions, 75 deletions

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
index 9f97df4d5152..a5ea451e67fc 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
@@ -35,12 +35,22 @@ Optional properties for HDMI:
 		  as an interrupt/status bit in the HDMI controller
 		  itself).  See bindings/pinctrl/brcm,bcm2835-gpio.txt
 
+Required properties for DPI:
+- compatible:	Should be "brcm,bcm2835-dpi"
+- reg:		Physical base address and length of the registers
+- clocks:	a) core: The core clock the unit runs on
+		b) pixel: The pixel clock that feeds the pixelvalve
+- port:		Port node with a single endpoint connecting to the panel
+		  device, as defined in [1]
+
 Required properties for V3D:
 - compatible:	Should be "brcm,bcm2835-v3d"
 - reg:		Physical base address and length of the V3D's registers
 - interrupts:	The interrupt number
 		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
 
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+
 Example:
 pixelvalve@7e807000 {
 	compatible = "brcm,bcm2835-pixelvalve2";
@@ -66,6 +76,22 @@ hdmi: hdmi@7e902000 {
 	clock-names = "pixel", "hdmi";
 };
 
+dpi: dpi@7e208000 {
+	compatible = "brcm,bcm2835-dpi";
+	reg = <0x7e208000 0x8c>;
+	clocks = <&clocks BCM2835_CLOCK_VPU>,
+	         <&clocks BCM2835_CLOCK_DPI>;
+	clock-names = "core", "pixel";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
 v3d: v3d@7ec00000 {
 	compatible = "brcm,bcm2835-v3d";
 	reg = <0x7ec00000 0x1000>;
@@ -75,3 +101,13 @@ v3d: v3d@7ec00000 {
 vc4: gpu {
 	compatible = "brcm,bcm2835-vc4";
 };
+
+panel: panel {
+	compatible = "ontat,yx700wv03", "simple-panel";
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
new file mode 100644
index 000000000000..4f2ba8c13d92
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -0,0 +1,52 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+	-compatible:
+		platform specific such as:
+		 * "samsung,exynos5-dp"
+		 * "rockchip,rk3288-dp"
+	-reg:
+		physical base address of the controller and length
+		of memory mapped region.
+	-interrupts:
+		interrupt combiner values.
+	-clocks:
+		from common clock binding: handle to dp clock.
+	-clock-names:
+		from common clock binding: Shall be "dp".
+	-interrupt-parent:
+		phandle to Interrupt combiner node.
+	-phys:
+		from general PHY binding: the phandle for the PHY device.
+	-phy-names:
+		from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+	-force-hpd:
+		Indicate driver need force hpd when hpd detect failed, this
+		is used for some eDP screen which don't have hpd signal.
+	-hpd-gpios:
+		Hotplug detect GPIO.
+		Indicates which GPIO should be used for hotplug detection
+	-port@[X]: SoC specific port nodes with endpoint definitions as defined
+		in Documentation/devicetree/bindings/media/video-interfaces.txt,
+		please refer to the SoC specific binding document:
+		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+-------------------------------------------------------------------------------
+
+Example:
+
+	dp-controller {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x10000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		clocks = <&clock 342>;
+		clock-names = "dp";
+
+		phys = <&dp_phy>;
+		phy-names = "dp";
+	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
index 377afbf5122a..c9fd7b3807e7 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
@@ -5,7 +5,8 @@ Exynos series of SoCs which transfers the image data from a video memory
 buffer to an external LCD interface.
 
 Required properties:
-- compatible: value should be "samsung,exynos5433-decon";
+- compatible: value should be one of:
+	"samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
 - reg: physical base address and length of the DECON registers set.
 - interrupts: should contain a list of all DECON IP block interrupts in the
 	      order: VSYNC, LCD_SYSTEM. The interrupt specifier format
@@ -16,7 +17,7 @@ Required properties:
 - clocks: must include clock specifiers corresponding to entries in the
 	  clock-names property.
 - clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "aclk_decon", "aclk_smmu_decon0x",
+	       property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x",
 	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
 	       "sclk_decon_eclk"
 - ports: contains a port which is connected to mic node. address-cells and
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index fe4a7a2dea9c..ade5d8eebf85 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -1,20 +1,3 @@
-Device-Tree bindings for Samsung Exynos Embedded DisplayPort Transmitter(eDP)
-
-DisplayPort is industry standard to accommodate the growing board adoption
-of digital display technology within the PC and CE industries.
-It consolidates the internal and external connection methods to reduce device
-complexity and cost. It also supports necessary features for important cross
-industry applications and provides performance scalability to enable the next
-generation of displays that feature higher color depths, refresh rates, and
-display resolutions.
-
-eDP (embedded display port) device is compliant with Embedded DisplayPort
-standard as follows,
-- DisplayPort standard 1.1a for Exynos5250 and Exynos5260.
-- DisplayPort standard 1.3 for Exynos5422s and Exynos5800.
-
-eDP resides between FIMD and panel or FIMD and bridge such as LVDS.
-
 The Exynos display port interface should be configured based on
 the type of panel connected to it.
 
@@ -48,26 +31,6 @@ Required properties for dp-controller:
 		from general PHY binding: the phandle for the PHY device.
 	-phy-names:
 		from general PHY binding: Should be "dp".
-	-samsung,color-space:
-		input video data format.
-			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
-	-samsung,dynamic-range:
-		dynamic range for input video data.
-			VESA = 0, CEA = 1
-	-samsung,ycbcr-coeff:
-		YCbCr co-efficients for input video.
-			COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
-	-samsung,color-depth:
-		number of bits per colour component.
-			COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
-	-samsung,link-rate:
-		link rate supported by the panel.
-			LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
-	-samsung,lane-count:
-		number of lanes supported by the panel.
-			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
-	- display-timings: timings for the connected panel as described by
-		Documentation/devicetree/bindings/display/display-timing.txt
 
 Optional properties for dp-controller:
 	-interlaced:
@@ -83,17 +46,31 @@ Optional properties for dp-controller:
 		Hotplug detect GPIO.
 			Indicates which GPIO should be used for hotplug
 			detection
-Video interfaces:
-  Device node can contain video interface port nodes according to [1].
-  The following are properties specific to those nodes:
-
-  endpoint node connected to bridge or panel node:
-   - remote-endpoint: specifies the endpoint in panel or bridge node.
-		      This node is required in all kinds of exynos dp
-		      to represent the connection between dp and bridge
-		      or dp and panel.
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+	-video interfaces: Device node can contain video interface port
+			nodes according to [1].
+	- display-timings: timings for the connected panel as described by
+		Documentation/devicetree/bindings/display/panel/display-timing.txt
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+	-phys (required)
+	-phy-names (required)
+	-hpd-gpios (optional)
+	 force-hpd (optional)
+
+Deprecated properties for DisplayPort:
+-interlaced:            deprecated prop that can parsed from drm_display_mode.
+-vsync-active-high:     deprecated prop that can parsed from drm_display_mode.
+-hsync-active-high:     deprecated prop that can parsed from drm_display_mode.
+-samsung,ycbcr-coeff:   deprecated prop that can parsed from drm_display_mode.
+-samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode.
+-samsung,color-space:   deprecated prop that can parsed from drm_display_info.
+-samsung,color-depth:   deprecated prop that can parsed from drm_display_info.
+-samsung,link-rate:     deprecated prop that can reading from monitor by dpcd method.
+-samsung,lane-count:    deprecated prop that can reading from monitor by dpcd method.
+-samsung,hpd-gpio:      deprecated name for hpd-gpios.
+
+-------------------------------------------------------------------------------
 
 Example:
 
@@ -112,13 +89,6 @@ SOC specific portion:
 
 Board Specific portion:
 	dp-controller {
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
-
 		display-timings {
 			native-mode = <&lcd_timing>;
 			lcd_timing: 1366x768 {
@@ -135,18 +105,9 @@ Board Specific portion:
 		};
 
 		ports {
-			port {
+			port@0 {
 				dp_out: endpoint {
-					remote-endpoint = <&dp_in>;
-				};
-			};
-		};
-
-		panel {
-			...
-			port {
-				dp_in: endpoint {
-					remote-endpoint = <&dp_out>;
+					remote-endpoint = <&bridge_in>;
 				};
 			};
 		};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
index d474f59be6d6..a2ec4c1c9382 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
@@ -5,6 +5,7 @@ Required properties:
 	1) "samsung,exynos4210-hdmi"
 	2) "samsung,exynos4212-hdmi"
 	3) "samsung,exynos5420-hdmi"
+	4) "samsung,exynos5433-hdmi"
 - reg: physical base address of the hdmi and length of memory mapped
 	region.
 - interrupts: interrupt number to the cpu.
@@ -12,6 +13,11 @@ Required properties:
 	a) phandle of the gpio controller node.
 	b) pin number within the gpio controller.
 	c) optional flags and pull up/down.
+- ddc: phandle to the hdmi ddc node
+- phy: phandle to the hdmi phy node
+- samsung,syscon-phandle: phandle for system controller node for PMU.
+
+Required properties for Exynos 4210, 4212, 5420 and 5433:
 - clocks: list of clock IDs from SoC clock driver.
 	a) hdmi: Gate of HDMI IP bus clock.
 	b) sclk_hdmi: Gate of HDMI special clock.
@@ -25,9 +31,24 @@ Required properties:
 		sclk_pixel.
 - clock-names: aliases as per driver requirements for above clock IDs:
 	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
-- ddc: phandle to the hdmi ddc node
-- phy: phandle to the hdmi phy node
-- samsung,syscon-phandle: phandle for system controller node for PMU.
+
+Required properties for Exynos 5433:
+- clocks: list of clock specifiers according to common clock bindings.
+	a) hdmi_pclk: Gate of HDMI IP APB bus.
+	b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus.
+	d) i_tmds_clk: Gate of HDMI TMDS clock.
+	e) i_pixel_clk: Gate of HDMI pixel clock.
+	f) i_spdif_clk: Gate of HDMI SPDIF clock.
+	g) oscclk: Oscillator clock, used as parent of following *_user clocks
+		in case HDMI-PHY is not operational.
+	h) tmds_clko: TMDS clock generated by HDMI-PHY.
+	i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko,
+		respectively if HDMI-PHY is off and operational.
+	j) pixel_clko: Pixel clock generated by HDMI-PHY.
+	k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko,
+		respectively if HDMI-PHY is off and operational.
+- clock-names: aliases for above clock specfiers.
+- samsung,sysreg: handle to syscon used to control the system registers.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt
index ebf1be9ae393..ae55cde1b69e 100644
--- a/Documentation/devicetree/bindings/display/fsl,dcu.txt
+++ b/Documentation/devicetree/bindings/display/fsl,dcu.txt
@@ -6,17 +6,24 @@ Required properties:
 	* "fsl,vf610-dcu".
 
 - reg:			Address and length of the register set for dcu.
-- clocks:		From common clock binding: handle to dcu clock.
-- clock-names:		From common clock binding: Shall be "dcu".
+- clocks:		Handle to "dcu" and "pix" clock (in the order below)
+			This can be the same clock (e.g. LS1021a)
+			See ../clocks/clock-bindings.txt for details.
+- clock-names:		Should be "dcu" and "pix"
+			See ../clocks/clock-bindings.txt for details.
 - big-endian		Boolean property, LS1021A DCU registers are big-endian.
 - fsl,panel:		The phandle to panel node.
 
+Optional properties:
+- fsl,tcon:		The phandle to the timing controller node.
+
 Examples:
 dcu: dcu@2ce0000 {
 	compatible = "fsl,ls1021a-dcu";
 	reg = <0x0 0x2ce0000 0x0 0x10000>;
-	clocks = <&platform_clk 0>;
-	clock-names = "dcu";
+	clocks = <&platform_clk 0>, <&platform_clk 0>;
+	clock-names = "dcu", "pix";
 	big-endian;
 	fsl,panel = <&panel>;
+	fsl,tcon = <&tcon>;
 };
diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt
new file mode 100644
index 000000000000..6fa4ab668db5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt
@@ -0,0 +1,18 @@
+Device Tree bindings for Freescale TCON Driver
+
+Required properties:
+- compatible:		Should be one of
+	* "fsl,vf610-tcon".
+
+- reg:			Address and length of the register set for tcon.
+- clocks:		From common clock binding: handle to tcon ipg clock.
+- clock-names:		From common clock binding: Shall be "ipg".
+
+Examples:
+timing-controller@4003d000 {
+	compatible = "fsl,vf610-tcon";
+	reg = <0x4003d000 0x1000>;
+	clocks = <&clks VF610_CLK_TCON0>;
+	clock-names = "ipg";
+	status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt
new file mode 100644
index 000000000000..d270bfe4e4e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt
@@ -0,0 +1,72 @@
+Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver
+
+A DSI Host Controller resides in the middle of display controller and external
+HDMI converter or panel.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-dsi".
+- reg: physical base address and length of dsi controller's registers.
+- clocks: contains APB clock phandle + clock-specifier pair.
+- clock-names: should be "pclk".
+- ports: contains DSI controller input and output sub port.
+  The input port connects to ADE output port with the reg value "0".
+  The output port with the reg value "1", it could connect to panel or
+  any other bridge endpoints.
+  See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+A example of HiKey board hi6220 SoC and board specific DT entry:
+Example:
+
+SoC specific:
+	dsi: dsi@f4107800 {
+		compatible = "hisilicon,hi6220-dsi";
+		reg = <0x0 0xf4107800 0x0 0x100>;
+		clocks = <&media_ctrl  HI6220_DSI_PCLK>;
+		clock-names = "pclk";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* 0 for input port */
+			port@0 {
+				reg = <0>;
+				dsi_in: endpoint {
+					remote-endpoint = <&ade_out>;
+				};
+			};
+		};
+	};
+
+
+Board specific:
+	&dsi {
+		status = "ok";
+
+		ports {
+			/* 1 for output port */
+			port@1 {
+				reg = <1>;
+
+				dsi_out0: endpoint@0 {
+					remote-endpoint = <&adv7533_in>;
+				};
+			};
+		};
+	};
+
+	&i2c2 {
+		...
+
+		adv7533: adv7533@39 {
+			...
+
+			port {
+				adv7533_in: endpoint {
+					remote-endpoint = <&dsi_out0>;
+				};
+			};
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
new file mode 100644
index 000000000000..38dc9d60eef8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
@@ -0,0 +1,64 @@
+Device-Tree bindings for hisilicon ADE display controller driver
+
+ADE (Advanced Display Engine) is the display controller which grab image
+data from memory, do composition, do post image processing, generate RGB
+timing stream and transfer to DSI.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-ade".
+- reg: physical base address and length of the ADE controller's registers.
+- hisilicon,noc-syscon: ADE NOC QoS syscon.
+- resets: The ADE reset controller node.
+- interrupt: the ldi vblank interrupt number used.
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+  in clock-names.
+- clock-names: should contain:
+  "clk_ade_core" for the ADE core clock.
+  "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with
+  jpeg codec.
+  "clk_ade_pix" for the ADE pixel clok.
+- assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks'
+  phandle + clock-specifier pairs.
+- assigned-clock-rates: clock rates, one for each entry in assigned-clocks.
+  The rate of "clk_ade_core" could be "360000000" or "180000000";
+  The rate of "clk_codec_jpeg" could be or less than "1440000000".
+  These rate values could be configured according to performance and power
+  consumption.
+- port: the output port. This contains one endpoint subnode, with its
+  remote-endpoint set to the phandle of the connected DSI input endpoint.
+  See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent.
+
+
+A example of HiKey board hi6220 SoC specific DT entry:
+Example:
+
+	ade: ade@f4100000 {
+		compatible = "hisilicon,hi6220-ade";
+		reg = <0x0 0xf4100000 0x0 0x7800>;
+		reg-names = "ade_base";
+		hisilicon,noc-syscon = <&medianoc_ade>;
+		resets = <&media_ctrl MEDIA_ADE>;
+		interrupts = <0 115 4>; /* ldi interrupt */
+
+		clocks = <&media_ctrl HI6220_ADE_CORE>,
+			 <&media_ctrl HI6220_CODEC_JPEG>,
+			 <&media_ctrl HI6220_ADE_PIX_SRC>;
+		/*clock name*/
+		clock-names  = "clk_ade_core",
+			       "clk_codec_jpeg",
+			       "clk_ade_pix";
+
+		assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+			<&media_ctrl HI6220_CODEC_JPEG>;
+		assigned-clock-rates = <360000000>, <288000000>;
+		dma-coherent;
+
+		port {
+			ade_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
new file mode 100644
index 000000000000..db6e77edbea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -0,0 +1,203 @@
+Mediatek display subsystem
+==========================
+
+The Mediatek display subsystem consists of various DISP function blocks in the
+MMSYS register space. The connections between them can be configured by output
+and input selectors in the MMSYS_CONFIG register space. Pixel clock and start
+of frame signal are distributed to the other function blocks by a DISP_MUTEX
+function block.
+
+All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
+For a description of the MMSYS_CONFIG binding, see
+Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt.
+
+DISP function blocks
+====================
+
+A display stream starts at a source function block that reads pixel data from
+memory and ends with a sink function block that drives pixels on a display
+interface, or writes pixels back to memory. All DISP function blocks have
+their own register space, interrupt, and clock gate. The blocks that can
+access memory additionally have to list the IOMMU and local arbiter they are
+connected to.
+
+For a description of the display interface sink function blocks, see
+Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and
+Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt.
+
+Required properties (all function blocks):
+- compatible: "mediatek,<chip>-disp-<function>", one of
+	"mediatek,<chip>-disp-ovl"   - overlay (4 layers, blending, csc)
+	"mediatek,<chip>-disp-rdma"  - read DMA / line buffer
+	"mediatek,<chip>-disp-wdma"  - write DMA
+	"mediatek,<chip>-disp-color" - color processor
+	"mediatek,<chip>-disp-aal"   - adaptive ambient light controller
+	"mediatek,<chip>-disp-gamma" - gamma correction
+	"mediatek,<chip>-disp-merge" - merge streams from two RDMA sources
+	"mediatek,<chip>-disp-split" - split stream to two encoders
+	"mediatek,<chip>-disp-ufoe"  - data compression engine
+	"mediatek,<chip>-dsi"        - DSI controller, see mediatek,dsi.txt
+	"mediatek,<chip>-dpi"        - DPI controller, see mediatek,dpi.txt
+	"mediatek,<chip>-disp-mutex" - display mutex
+	"mediatek,<chip>-disp-od"    - overdrive
+- reg: Physical base address and length of the function block register space
+- interrupts: The interrupt signal from the function block (required, except for
+  merge and split function blocks).
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+  For most function blocks this is just a single clock input. Only the DSI and
+  DPI controller nodes have multiple clock inputs. These are documented in
+  mediatek,dsi.txt and mediatek,dpi.txt, respectively.
+
+Required properties (DMA function blocks):
+- compatible: Should be one of
+	"mediatek,<chip>-disp-ovl"
+	"mediatek,<chip>-disp-rdma"
+	"mediatek,<chip>-disp-wdma"
+- larb: Should contain a phandle pointing to the local arbiter device as defined
+  in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+- iommus: Should point to the respective IOMMU block with master port as
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+  for details.
+
+Examples:
+
+mmsys: clock-controller@14000000 {
+	compatible = "mediatek,mt8173-mmsys", "syscon";
+	reg = <0 0x14000000 0 0x1000>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	#clock-cells = <1>;
+};
+
+ovl0: ovl@1400c000 {
+	compatible = "mediatek,mt8173-disp-ovl";
+	reg = <0 0x1400c000 0 0x1000>;
+	interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_OVL0>;
+	iommus = <&iommu M4U_PORT_DISP_OVL0>;
+	mediatek,larb = <&larb0>;
+};
+
+ovl1: ovl@1400d000 {
+	compatible = "mediatek,mt8173-disp-ovl";
+	reg = <0 0x1400d000 0 0x1000>;
+	interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_OVL1>;
+	iommus = <&iommu M4U_PORT_DISP_OVL1>;
+	mediatek,larb = <&larb4>;
+};
+
+rdma0: rdma@1400e000 {
+	compatible = "mediatek,mt8173-disp-rdma";
+	reg = <0 0x1400e000 0 0x1000>;
+	interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+	mediatek,larb = <&larb0>;
+};
+
+rdma1: rdma@1400f000 {
+	compatible = "mediatek,mt8173-disp-rdma";
+	reg = <0 0x1400f000 0 0x1000>;
+	interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+	mediatek,larb = <&larb4>;
+};
+
+rdma2: rdma@14010000 {
+	compatible = "mediatek,mt8173-disp-rdma";
+	reg = <0 0x14010000 0 0x1000>;
+	interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
+	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
+	mediatek,larb = <&larb4>;
+};
+
+wdma0: wdma@14011000 {
+	compatible = "mediatek,mt8173-disp-wdma";
+	reg = <0 0x14011000 0 0x1000>;
+	interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+	mediatek,larb = <&larb0>;
+};
+
+wdma1: wdma@14012000 {
+	compatible = "mediatek,mt8173-disp-wdma";
+	reg = <0 0x14012000 0 0x1000>;
+	interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
+	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
+	mediatek,larb = <&larb4>;
+};
+
+color0: color@14013000 {
+	compatible = "mediatek,mt8173-disp-color";
+	reg = <0 0x14013000 0 0x1000>;
+	interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+};
+
+color1: color@14014000 {
+	compatible = "mediatek,mt8173-disp-color";
+	reg = <0 0x14014000 0 0x1000>;
+	interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_COLOR1>;
+};
+
+aal@14015000 {
+	compatible = "mediatek,mt8173-disp-aal";
+	reg = <0 0x14015000 0 0x1000>;
+	interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_AAL>;
+};
+
+gamma@14016000 {
+	compatible = "mediatek,mt8173-disp-gamma";
+	reg = <0 0x14016000 0 0x1000>;
+	interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+};
+
+ufoe@1401a000 {
+	compatible = "mediatek,mt8173-disp-ufoe";
+	reg = <0 0x1401a000 0 0x1000>;
+	interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_UFOE>;
+};
+
+dsi0: dsi@1401b000 {
+	/* See mediatek,dsi.txt for details */
+};
+
+dpi0: dpi@1401d000 {
+	/* See mediatek,dpi.txt for details */
+};
+
+mutex: mutex@14020000 {
+	compatible = "mediatek,mt8173-disp-mutex";
+	reg = <0 0x14020000 0 0x1000>;
+	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_MUTEX_32K>;
+};
+
+od@14023000 {
+	compatible = "mediatek,mt8173-disp-od";
+	reg = <0 0x14023000 0 0x1000>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_DISP_OD>;
+};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
new file mode 100644
index 000000000000..b6a7e7397b8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -0,0 +1,35 @@
+Mediatek DPI Device
+===================
+
+The Mediatek DPI function block is a sink of the display subsystem and
+provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
+output bus.
+
+Required properties:
+- compatible: "mediatek,<chip>-dpi"
+- reg: Physical base address and length of the controller's registers
+- interrupts: The interrupt signal from the function block.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "pixel", "engine", and "pll"
+- port: Output port node with endpoint definitions as described in
+  Documentation/devicetree/bindings/graph.txt. This port should be connected
+  to the input port of an attached HDMI or LVDS encoder chip.
+
+Example:
+
+dpi0: dpi@1401d000 {
+	compatible = "mediatek,mt8173-dpi";
+	reg = <0 0x1401d000 0 0x1000>;
+	interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+		 <&mmsys CLK_MM_DPI_ENGINE>,
+		 <&apmixedsys CLK_APMIXED_TVDPLL>;
+	clock-names = "pixel", "engine", "pll";
+
+	port {
+		dpi0_out: endpoint {
+			remote-endpoint = <&hdmi0_in>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
new file mode 100644
index 000000000000..2b1585a34b85
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -0,0 +1,60 @@
+Mediatek DSI Device
+===================
+
+The Mediatek DSI function block is a sink of the display subsystem and can
+drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+channel output.
+
+Required properties:
+- compatible: "mediatek,<chip>-dsi"
+- reg: Physical base address and length of the controller's registers
+- interrupts: The interrupt signal from the function block.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "engine", "digital", and "hs"
+- phys: phandle link to the MIPI D-PHY controller.
+- phy-names: must contain "dphy"
+- port: Output port node with endpoint definitions as described in
+  Documentation/devicetree/bindings/graph.txt. This port should be connected
+  to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
+
+MIPI TX Configuration Module
+============================
+
+The MIPI TX configuration module controls the MIPI D-PHY.
+
+Required properties:
+- compatible: "mediatek,<chip>-mipi-tx"
+- reg: Physical base address and length of the controller's registers
+- clocks: PLL reference clock
+- clock-output-names: name of the output clock line to the DSI encoder
+- #clock-cells: must be <0>;
+- #phy-cells: must be <0>.
+
+Example:
+
+mipi_tx0: mipi-dphy@10215000 {
+	compatible = "mediatek,mt8173-mipi-tx";
+	reg = <0 0x10215000 0 0x1000>;
+	clocks = <&clk26m>;
+	clock-output-names = "mipi_tx0_pll";
+	#clock-cells = <0>;
+	#phy-cells = <0>;
+};
+
+dsi0: dsi@1401b000 {
+	compatible = "mediatek,mt8173-dsi";
+	reg = <0 0x1401b000 0 0x1000>;
+	interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
+		 <&mipi_tx0>;
+	clock-names = "engine", "digital", "hs";
+	phys = <&mipi_tx0>;
+	phy-names = "dphy";
+
+	port {
+		dsi0_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt b/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt
new file mode 100644
index 000000000000..3e10cd782491
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt
@@ -0,0 +1,7 @@
+Innolux AT070TN92 7.0" WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,at070tn92"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt
new file mode 100644
index 000000000000..74540a090669
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt
@@ -0,0 +1,7 @@
+Olimex 4.3" TFT LCD panel
+
+Required properties:
+- compatible: should be "olimex,lcd-olinuxino-43-ts"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
new file mode 100644
index 000000000000..3d8a5e029242
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
@@ -0,0 +1,7 @@
+On Tat Industrial Company 7" DPI TFT panel.
+
+Required properties:
+- compatible: should be "ontat,yx700wv03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt
new file mode 100644
index 000000000000..a2613b9675df
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt
@@ -0,0 +1,8 @@
+TPK U.S.A. LLC Fusion 7" integrated projected capacitive touch display with,
+800 x 480 (WVGA) LCD panel.
+
+Required properties:
+- compatible: should be "tpk,f07a-0102"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt
new file mode 100644
index 000000000000..b9d051196ba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt
@@ -0,0 +1,8 @@
+TPK U.S.A. LLC Fusion 10.1" integrated projected capacitive touch display with,
+1024 x 600 (WSVGA) LCD panel.
+
+Required properties:
+- compatible: should be "tpk,f10a-0102"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000000000000..e832ff98fd61
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,92 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+	  of memory mapped region.
+
+- clock-names: from common clock binding:
+	       Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+	  See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <&edp_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+    Port 0: contained 2 endpoints, connecting to the output of vop.
+    Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+- force-hpd (optional)
+-------------------------------------------------------------------------------
+
+Example:
+	dp-controller: dp@ff970000 {
+		compatible = "rockchip,rk3288-dp";
+		reg = <0xff970000 0x4000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+		clock-names = "dp", "pclk";
+		phys = <&dp_phy>;
+		phy-names = "dp";
+
+		rockchip,grf = <&grf>;
+		resets = <&cru 111>;
+		reset-names = "dp";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_hpd>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+
+			edp_out: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				edp_out_panel: endpoint {
+					reg = <0>;
+					remote-endpoint = <&panel_in_edp>
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		edp {
+			edp_hpd: edp-hpd {
+				rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
new file mode 100644
index 000000000000..c5c7dfd37df2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
@@ -0,0 +1,35 @@
+ARC PGU
+
+This is a display controller found on several development boards produced
+by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
+framebuffer and sends it to a single digital encoder (usually HDMI).
+
+Required properties:
+  - compatible: "snps,arcpgu"
+  - reg: Physical base address and length of the controller's registers.
+  - clocks: A list of phandle + clock-specifier pairs, one for each
+    entry in 'clock-names'.
+  - clock-names: A list of clock names. For ARC PGU it should contain:
+      - "pxlclk" for the clock feeding the output PLL of the controller.
+
+Required sub-nodes:
+  - port: The PGU connection to an encoder chip.
+
+Example:
+
+/ {
+	...
+
+	pgu@XXXXXXXX {
+		compatible = "snps,arcpgu";
+		reg = <0xXXXXXXXX 0x400>;
+		clocks = <&clock_node>;
+		clock-names = "pxlclk";
+
+		port {
+			pgu_output: endpoint {
+				remote-endpoint = <&hdmi_enc_input>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
new file mode 100644
index 000000000000..df8f4aeefe4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -0,0 +1,258 @@
+Allwinner A10 Display Pipeline
+==============================
+
+The Allwinner A10 Display pipeline is composed of several components
+that are going to be documented below:
+
+TV Encoder
+----------
+
+The TV Encoder supports the composite and VGA output. It is one end of
+the pipeline.
+
+Required properties:
+ - compatible: value should be "allwinner,sun4i-a10-tv-encoder".
+ - reg: base address and size of memory-mapped region
+ - clocks: the clocks driving the TV encoder
+ - resets: phandle to the reset controller driving the encoder
+
+- ports: A ports node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. The
+  first port should be the input endpoint.
+
+TCON
+----
+
+The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
+
+Required properties:
+ - compatible: value should be "allwinner,sun5i-a13-tcon".
+ - reg: base address and size of memory-mapped region
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the TCON. Three are needed:
+   - 'ahb': the interface clocks
+   - 'tcon-ch0': The clock driving the TCON channel 0
+   - 'tcon-ch1': The clock driving the TCON channel 1
+ - resets: phandles to the reset controllers driving the encoder
+   - "lcd": the reset line for the TCON channel 0
+
+ - clock-names: the clock names mentioned above
+ - reset-names: the reset names mentioned above
+ - clock-output-names: Name of the pixel clock created
+
+- ports: A ports node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. The
+  first port should be the input endpoint, the second one the output
+
+  The output should have two endpoints. The first is the block
+  connected to the TCON channel 0 (usually a panel or a bridge), the
+  second the block connected to the TCON channel 1 (usually the TV
+  encoder)
+
+
+Display Engine Backend
+----------------------
+
+The display engine backend exposes layers and sprites to the
+system.
+
+Required properties:
+  - compatible: value must be one of:
+    * allwinner,sun5i-a13-display-backend
+  - reg: base address and size of the memory-mapped region.
+  - clocks: phandles to the clocks feeding the frontend and backend
+    * ahb: the backend interface clock
+    * mod: the backend module clock
+    * ram: the backend DRAM clock
+  - clock-names: the clock names mentioned above
+  - resets: phandles to the reset controllers driving the backend
+
+- ports: A ports node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. The
+  first port should be the input endpoints, the second one the output
+
+Display Engine Frontend
+-----------------------
+
+The display engine frontend does formats conversion, scaling,
+deinterlacing and color space conversion.
+
+Required properties:
+  - compatible: value must be one of:
+    * allwinner,sun5i-a13-display-frontend
+  - reg: base address and size of the memory-mapped region.
+  - interrupts: interrupt associated to this IP
+  - clocks: phandles to the clocks feeding the frontend and backend
+    * ahb: the backend interface clock
+    * mod: the backend module clock
+    * ram: the backend DRAM clock
+  - clock-names: the clock names mentioned above
+  - resets: phandles to the reset controllers driving the backend
+
+- ports: A ports node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. The
+  first port should be the input endpoints, the second one the outputs
+
+
+Display Engine Pipeline
+-----------------------
+
+The display engine pipeline (and its entry point, since it can be
+either directly the backend or the frontend) is represented as an
+extra node.
+
+Required properties:
+  - compatible: value must be one of:
+    * allwinner,sun5i-a13-display-engine
+
+  - allwinner,pipelines: list of phandle to the display engine
+    frontends available.
+
+Example:
+
+panel: panel {
+	compatible = "olimex,lcd-olinuxino-43-ts";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		panel_input: endpoint {
+			remote-endpoint = <&tcon0_out_panel>;
+		};
+	};
+};
+
+tve0: tv-encoder@01c0a000 {
+	compatible = "allwinner,sun4i-a10-tv-encoder";
+	reg = <0x01c0a000 0x1000>;
+	clocks = <&ahb_gates 34>;
+	resets = <&tcon_ch0_clk 0>;
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		tve0_in_tcon0: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&tcon0_out_tve0>;
+		};
+	};
+};
+
+tcon0: lcd-controller@1c0c000 {
+	compatible = "allwinner,sun5i-a13-tcon";
+	reg = <0x01c0c000 0x1000>;
+	interrupts = <44>;
+	resets = <&tcon_ch0_clk 1>;
+	reset-names = "lcd";
+	clocks = <&ahb_gates 36>,
+		 <&tcon_ch0_clk>,
+		 <&tcon_ch1_clk>;
+	clock-names = "ahb",
+		      "tcon-ch0",
+		      "tcon-ch1";
+	clock-output-names = "tcon-pixel-clock";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		tcon0_in: port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tcon0_in_be0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&be0_out_tcon0>;
+			};
+		};
+
+		tcon0_out: port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tcon0_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+
+			tcon0_out_tve0: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&tve0_in_tcon0>;
+			};
+		};
+	};
+};
+
+fe0: display-frontend@1e00000 {
+	compatible = "allwinner,sun5i-a13-display-frontend";
+	reg = <0x01e00000 0x20000>;
+	interrupts = <47>;
+	clocks = <&ahb_gates 46>, <&de_fe_clk>,
+		 <&dram_gates 25>;
+	clock-names = "ahb", "mod",
+		      "ram";
+	resets = <&de_fe_clk>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fe0_out: port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			fe0_out_be0: endpoint {
+				remote-endpoint = <&be0_in_fe0>;
+			};
+		};
+	};
+};
+
+be0: display-backend@1e60000 {
+	compatible = "allwinner,sun5i-a13-display-backend";
+	reg = <0x01e60000 0x10000>;
+	clocks = <&ahb_gates 44>, <&de_be_clk>,
+		 <&dram_gates 26>;
+	clock-names = "ahb", "mod",
+		      "ram";
+	resets = <&de_be_clk>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		be0_in: port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			be0_in_fe0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&fe0_out_be0>;
+			};
+		};
+
+		be0_out: port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			be0_out_tcon0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&tcon0_in_be0>;
+			};
+		};
+	};
+};
+
+display-engine {
+	compatible = "allwinner,sun5i-a13-display-engine";
+	allwinner,pipelines = <&fe0>;
+};