diff options
| author |   Sascha Hauer <s.hauer@pengutronix.de> | 2013-08-20 10:04:32 +0200 |
|---|---|---|
| committer |   Vinod Koul <vinod.koul@intel.com> | 2013-08-26 20:47:16 +0530 |
| commit | dcfec3c09890120d86d4e86887074c76763075ca (patch) | |
| tree | 9522a808823128c8ec673f2ded11f5f40b1671d0 /Documentation/devicetree/bindings/dma | |
| parent | dma: imx-sdma: Use struct for driver data (diff) | |
| download | linux-dev-dcfec3c09890120d86d4e86887074c76763075ca.tar.xz linux-dev-dcfec3c09890120d86d4e86887074c76763075ca.zip | |
dma: imx-sdma: Add ROM script addresses to driver
This adds the ROM script addresses for i.MX25, i.MX5x and i.MX6 to the
SDMA driver needed for the driver to work without additional firmware.
The ROM script addresses are SoC specific and in some cases even tapeout
specific. This patch adds the ROM script addresses only for SoCs which
do not have a tapeout specific SDMA ROM, because currently it's unclear
how this case should be handled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Diffstat (limited to 'Documentation/devicetree/bindings/dma')
| -rw-r--r-- | Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index 68cee4f5539f..4fa814d38321 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -1,7 +1,12 @@ * Freescale Smart Direct Memory Access (SDMA) Controller for i.MX Required properties: -- compatible : Should be "fsl,<chip>-sdma" +- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma", + "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma", + "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or + "fsl,imx6q-sdma". The -to variants should be preferred since they + allow to determnine the correct ROM script addresses needed for + the driver to work without additional firmware. - reg : Should contain SDMA registers location and length - interrupts : Should contain SDMA interrupt - #dma-cells : Must be <3>. |