dt-bindings: consolidate display related bindings

This is a quite large renaming to consolidate display related bindings
into a single "display" directory from various scattered locations of
video, drm, gpu, fb, mipi, and panel. The prior location was somewhat
based on the Linux driver location, but bindings should be independent
of that.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>

1 files changed, 0 insertions, 58 deletions

diff --git a/Documentation/devicetree/bindings/drm/imx/hdmi.txt b/Documentation/devicetree/bindings/drm/imx/hdmi.txt
deleted file mode 100644
index 1b756cf9afb0..000000000000
--- a/Documentation/devicetree/bindings/drm/imx/hdmi.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Device-Tree bindings for HDMI Transmitter
-
-HDMI Transmitter
-================
-
-The HDMI Transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with accompanying PHY IP.
-
-Required properties:
- - #address-cells : should be <1>
- - #size-cells : should be <0>
- - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
- - gpr : should be <&gpr>.
-   The phandle points to the iomuxc-gpr region containing the HDMI
-   multiplexer control register.
- - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described
-   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-   Documentation/devicetree/bindings/clock/imx6q-clock.txt.
- - port@[0-4]: Up to four port nodes with endpoint definitions as defined in
-   Documentation/devicetree/bindings/media/video-interfaces.txt,
-   corresponding to the four inputs to the HDMI multiplexer.
-
-Optional properties:
- - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-
-example:
-
-	gpr: iomuxc-gpr@020e0000 {
-		/* ... */
-	};
-
-        hdmi: hdmi@0120000 {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                compatible = "fsl,imx6q-hdmi";
-                reg = <0x00120000 0x9000>;
-                interrupts = <0 115 0x04>;
-                gpr = <&gpr>;
-                clocks = <&clks 123>, <&clks 124>;
-                clock-names = "iahb", "isfr";
-                ddc-i2c-bus = <&i2c2>;
-
-                port@0 {
-                        reg = <0>;
-
-                        hdmi_mux_0: endpoint {
-                                remote-endpoint = <&ipu1_di0_hdmi>;
-                        };
-                };
-
-                port@1 {
-                        reg = <1>;
-
-                        hdmi_mux_1: endpoint {
-                                remote-endpoint = <&ipu1_di1_hdmi>;
-                        };
-                };
-        };