Merge branch 'for-3.5' of ../cgroup into block/for-3.5/core-merged

cgroup/for-3.5 contains the following changes which blk-cgroup needs
to proceed with the on-going cleanup.

* Dynamic addition and removal of cftypes to make config/stat file
  handling modular for policies.

* cgroup removal update to not wait for css references to drain to fix
  blkcg removal hang caused by cfq caching cfqgs.

Pull in cgroup/for-3.5 into block/for-3.5/core.  This causes the
following conflicts in block/blk-cgroup.c.

* 761b3ef50e "cgroup: remove cgroup_subsys argument from callbacks"
  conflicts with blkiocg_pre_destroy() addition and blkiocg_attach()
  removal.  Resolved by removing @subsys from all subsys methods.

* 676f7c8f84 "cgroup: relocate cftype and cgroup_subsys definitions in
  controllers" conflicts with ->pre_destroy() and ->attach() updates
  and removal of modular config.  Resolved by dropping forward
  declarations of the methods and applying updates to the relocated
  blkio_subsys.

* 4baf6e3325 "cgroup: convert all non-memcg controllers to the new
  cftype interface" builds upon the previous item.  Resolved by adding
  ->base_cftypes to the relocated blkio_subsys.

Signed-off-by: Tejun Heo <tj@kernel.org>

1 files changed, 23 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
new file mode 100644
index 000000000000..16695d9cf1e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
@@ -0,0 +1,23 @@
+twl4030 GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "ti,twl4030-gpio" for twl4030 GPIO controller
+- #gpio-cells : Should be two.
+  - first cell is the pin number
+  - second cell is used to specify optional parameters (unused)
+- gpio-controller : Marks the device node as a GPIO controller.
+- #interrupt-cells : Should be 2.
+- interrupt-controller: Mark the device node as an interrupt controller
+  The first cell is the GPIO number.
+  The second cell is not used.
+
+Example:
+
+twl_gpio: gpio {
+    compatible = "ti,twl4030-gpio";
+    #gpio-cells = <2>;
+    gpio-controller;
+    #interrupt-cells = <2>;
+    interrupt-controller;
+};