Merge branch 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Features:

   - new drivers: Renesas EMEV2, register based MUX, NXP LPC2xxx
   - core: scans DT and assigns wakeup interrupts.  no driver changes needed.
   - core: some refcouting issues fixed and better API for that
   - core: new helper function for best effort block read emulation
   - slave framework: proper DT bindings and userspace instantiation
   - some bigger work for xiic, pxa, omap drivers

  .. and quite a number of smaller driver fixes, cleanups, improvements"

* 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (65 commits)
  i2c: mux: reg Change ioread endianness for readback
  i2c: mux: reg: fix compilation warnings
  i2c: mux: reg: simplify register size checking
  i2c: muxes: fix leaked i2c adapter device node references
  i2c: allow specifying separate wakeup interrupt in device tree
  of/irq: export of_get_irq_byname()
  i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code
  i2c: Replace I2C_CROS_EC_TUNNEL dependency
  eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated
  i2c: core: Add support for best effort block read emulation
  i2c: lpc2k: add driver
  i2c: mux: Add register-based mux i2c-mux-reg
  i2c: dt: describe generic bindings
  i2c: slave: print warning if slave flag not set
  i2c: support 10 bit and slave addresses in sysfs 'new_device'
  i2c: take address space into account when checking for used addresses
  i2c: apply DT flags when probing
  i2c: make address check indpendent from client struct
  i2c: rename address check functions
  i2c: apply address offset for slaves, too
  ...

3 files changed, 104 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/ina209.txt b/Documentation/devicetree/bindings/hwmon/ina209.txt
new file mode 100644
index 000000000000..9dd2bee80840
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina209.txt
@@ -0,0 +1,18 @@
+ina209 properties
+
+Required properties:
+- compatible: Must be "ti,ina209"
+- reg: I2C address
+
+Optional properties:
+
+- shunt-resistor
+	Shunt resistor value in micro-Ohm
+
+Example:
+
+temp-sensor@4c {
+	compatible = "ti,ina209";
+	reg = <0x4c>;
+	shunt-resistor = <5000>;
+};
diff --git a/Documentation/devicetree/bindings/hwmon/ina2xx.txt b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
new file mode 100644
index 000000000000..a2ad85d7e747
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
@@ -0,0 +1,22 @@
+ina2xx properties
+
+Required properties:
+- compatible: Must be one of the following:
+	- "ti,ina219" for ina219
+	- "ti,ina220" for ina220
+	- "ti,ina226" for ina226
+	- "ti,ina230" for ina230
+- reg: I2C address
+
+Optional properties:
+
+- shunt-resistor
+	Shunt resistor value in micro-Ohm
+
+Example:
+
+ina220@44 {
+	compatible = "ti,ina220";
+	reg = <0x44>;
+	shunt-resistor = <1000>;
+};
diff --git a/Documentation/devicetree/bindings/hwmon/max6697.txt b/Documentation/devicetree/bindings/hwmon/max6697.txt
new file mode 100644
index 000000000000..5f793998e4a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/max6697.txt
@@ -0,0 +1,64 @@
+max6697 properties
+
+Required properties:
+- compatible:
+	Should be one of
+		maxim,max6581
+		maxim,max6602
+		maxim,max6622
+		maxim,max6636
+		maxim,max6689
+		maxim,max6693
+		maxim,max6694
+		maxim,max6697
+		maxim,max6698
+		maxim,max6699
+- reg: I2C address
+
+Optional properties:
+
+- smbus-timeout-disable
+	Set to disable SMBus timeout. If not specified, SMBus timeout will be
+	enabled.
+- extended-range-enable
+	Only valid for MAX6581. Set to enable extended temperature range.
+	Extended temperature will be disabled if not specified.
+- beta-compensation-enable
+	Only valid for MAX6693 and MX6694. Set to enable beta compensation on
+	remote temperature channel 1.
+	Beta compensation will be disabled if not specified.
+- alert-mask
+	Alert bit mask. Alert disabled for bits set.
+	Select bit 0 for local temperature, bit 1..7 for remote temperatures.
+	If not specified, alert will be enabled for all channels.
+- over-temperature-mask
+	Over-temperature bit mask. Over-temperature reporting disabled for
+	bits set.
+	Select bit 0 for local temperature, bit 1..7 for remote temperatures.
+	If not specified, over-temperature reporting will be enabled for all
+	channels.
+- resistance-cancellation
+	Boolean for all chips other than MAX6581. Set to enable resistance
+	cancellation on remote temperature channel 1.
+	For MAX6581, resistance cancellation enabled for all channels if
+	specified as boolean, otherwise as per bit mask specified.
+	Only supported for remote temperatures (bit 1..7).
+	If not specified, resistance cancellation will be disabled for all
+	channels.
+- transistor-ideality
+	For MAX6581 only. Two values; first is bit mask, second is ideality
+	select value as per MAX6581 data sheet. Select bit 1..7 for remote
+	channels.
+	Transistor ideality will be initialized to default (1.008) if not
+	specified.
+
+Example:
+
+temp-sensor@1a {
+	compatible = "maxim,max6697";
+	reg = <0x1a>;
+	smbus-timeout-disable;
+	resistance-cancellation;
+	alert-mask = <0x72>;
+	over-temperature-mask = <0x7f>;
+};