Merge tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:
 "The biggest highlight here is the start of using json-schema for DT
  bindings. Being able to validate bindings has been discussed for years
  with little progress.

   - Initial support for DT bindings using json-schema language. This is
     the start of converting DT bindings from free-form text to a
     structured format.

   - Reworking of initrd address initialization. This moves to using the
     phys address instead of virt addr in the DT parsing code. This
     rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
     rebuilding of lots of files.

   - Fix stale phandle entries in phandle cache

   - DT overlay validation improvements. This exposed several memory
     leak bugs which have been fixed.

   - Use node name and device_type helper functions in DT code

   - Last remaining conversions to using %pOFn printk specifier instead
     of device_node.name directly

   - Create new common RTC binding doc and move all trivial RTC devices
     out of trivial-devices.txt.

   - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
     PHY, and Xen shared memory

   - Update dtc to upstream version v1.4.7-57-gf267e674d145"

* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
  of: __of_detach_node() - remove node from phandle cache
  of: of_node_get()/of_node_put() nodes held in phandle cache
  gpio-omap.txt: add reg and interrupts properties
  dt-bindings: mrvl,intc: fix a trivial typo
  dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  dt-bindings: Convert trivial-devices.txt to json-schema
  dt-bindings: arm: mrvl: amend Browstone compatible string
  dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
  dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
  dt-bindings: arm: Add missing Xilinx boards
  dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
  dt-bindings: arm: Convert VIA board/soc bindings to json-schema
  dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
  dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
  dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
  dt-bindings: arm: Convert QCom board/soc bindings to json-schema
  dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
  dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
  dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
  dt-bindings: arm: Convert Altera board/soc bindings to json-schema
  ...

1 files changed, 0 insertions, 46 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
deleted file mode 100644
index 38a05562d1d2..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Device-Tree bindings for i2c gpio driver
-
-Required properties:
-	- compatible = "i2c-gpio";
-	- sda-gpios: gpio used for the sda signal, this should be flagged as
-	  active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
-	  from <dt-bindings/gpio/gpio.h> since the signal is by definition
-	  open drain.
-	- scl-gpios: gpio used for the scl signal, this should be flagged as
-	  active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
-	  from <dt-bindings/gpio/gpio.h> since the signal is by definition
-	  open drain.
-
-Optional properties:
-	- i2c-gpio,scl-output-only: scl as output only
-	- i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
-	- i2c-gpio,timeout-ms: timeout to get data
-
-Deprecated properties, do not use in new device tree sources:
-	- gpios: sda and scl gpio, alternative for {sda,scl}-gpios
-	- i2c-gpio,sda-open-drain: this means that something outside of our
-	  control has put the GPIO line used for SDA into open drain mode, and
-	  that something is not the GPIO chip. It is essentially an
-	  inconsistency flag.
-	- i2c-gpio,scl-open-drain: this means that something outside of our
-	  control has put the GPIO line used for SCL into open drain mode, and
-	  that something is not the GPIO chip. It is essentially an
-	  inconsistency flag.
-
-Example nodes:
-
-#include <dt-bindings/gpio/gpio.h>
-
-i2c@0 {
-	compatible = "i2c-gpio";
-	sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	rv3029c2@56 {
-		compatible = "rv3029c2";
-		reg = <0x56>;
-	};
-};