Merge branch 'next' into for-linus

Prepare input updates for 5.3 merge window.

16 files changed, 143 insertions, 53 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index ef973a0343c7..b7cec17c3daf 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -33,7 +33,7 @@ i2c0: i2c@fff84000 {
 	clock-frequency = <400000>;
 
 	24c512@50 {
-		compatible = "24c512";
+		compatible = "atmel,24c512";
 		reg = <0x50>;
 		pagesize = <128>;
 	}
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
deleted file mode 100644
index 38a05562d1d2..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Device-Tree bindings for i2c gpio driver
-
-Required properties:
-	- compatible = "i2c-gpio";
-	- sda-gpios: gpio used for the sda signal, this should be flagged as
-	  active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
-	  from <dt-bindings/gpio/gpio.h> since the signal is by definition
-	  open drain.
-	- scl-gpios: gpio used for the scl signal, this should be flagged as
-	  active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
-	  from <dt-bindings/gpio/gpio.h> since the signal is by definition
-	  open drain.
-
-Optional properties:
-	- i2c-gpio,scl-output-only: scl as output only
-	- i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
-	- i2c-gpio,timeout-ms: timeout to get data
-
-Deprecated properties, do not use in new device tree sources:
-	- gpios: sda and scl gpio, alternative for {sda,scl}-gpios
-	- i2c-gpio,sda-open-drain: this means that something outside of our
-	  control has put the GPIO line used for SDA into open drain mode, and
-	  that something is not the GPIO chip. It is essentially an
-	  inconsistency flag.
-	- i2c-gpio,scl-open-drain: this means that something outside of our
-	  control has put the GPIO line used for SCL into open drain mode, and
-	  that something is not the GPIO chip. It is essentially an
-	  inconsistency flag.
-
-Example nodes:
-
-#include <dt-bindings/gpio/gpio.h>
-
-i2c@0 {
-	compatible = "i2c-gpio";
-	sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	rv3029c2@56 {
-		compatible = "rv3029c2";
-		reg = <0x56>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
new file mode 100644
index 000000000000..da6129090a8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for GPIO bitbanged I2C
+
+maintainers:
+  - Wolfram Sang <wolfram@the-dreams.de>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: i2c-gpio
+
+  sda-gpios:
+    description:
+      gpio used for the sda signal, this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is by definition
+      open drain.
+    maxItems: 1
+
+  scl-gpios:
+    description:
+      gpio used for the scl signal, this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is by definition
+      open drain.
+    maxItems: 1
+
+  i2c-gpio,scl-output-only:
+    description: scl as output only
+    type: boolean
+
+  i2c-gpio,delay-us:
+    description: delay between GPIO operations (may depend on each platform)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  i2c-gpio,timeout-ms:
+    description: timeout to get data
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  # Deprecated properties, do not use in new device tree sources:
+  gpios:
+    minItems: 2
+    maxItems: 2
+    description: sda and scl gpio, alternative for {sda,scl}-gpios
+
+  i2c-gpio,sda-open-drain:
+    # Generate a warning if present
+    not: true
+    description: this means that something outside of our control has put
+      the GPIO line used for SDA into open drain mode, and that something is
+      not the GPIO chip. It is essentially an inconsistency flag.
+
+  i2c-gpio,scl-open-drain:
+    # Generate a warning if present
+    not: true
+    description: this means that something outside of our control has put the
+      GPIO line used for SCL into open drain mode, and that something is not
+      the GPIO chip. It is essentially an inconsistency flag.
+
+required:
+  - compatible
+  - sda-gpios
+  - scl-gpios
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt
new file mode 100644
index 000000000000..dcc8390e0d24
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt
@@ -0,0 +1,20 @@
+i2c Controller on XScale platforms such as IOP3xx and IXP4xx
+
+Required properties:
+- compatible : Must be one of
+  "intel,iop3xx-i2c"
+  "intel,ixp4xx-i2c";
+- reg
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example:
+
+i2c@c8011000 {
+	compatible = "intel,ixp4xx-i2c";
+	reg = <0xc8011000 0x18>;
+	interrupts = <33 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
index e199695b1c96..ee4c32454198 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
@@ -10,6 +10,7 @@ Required properties:
       "mediatek,mt6589-i2c": for MediaTek MT6589
       "mediatek,mt7622-i2c": for MediaTek MT7622
       "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
+      "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
       "mediatek,mt8173-i2c": for MediaTek MT8173
   - reg: physical base address of the controller and dma base, length of memory
     mapped region.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
index 1e98c6b3a721..8b1e49cdce3f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
@@ -43,7 +43,7 @@ Example:
 			reg = <0>;
 
 			eeprom@50 {
-				compatible = "at,24c02";
+				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};
 		};
@@ -54,7 +54,7 @@ Example:
 			reg = <1>;
 
 			eeprom@50 {
-				compatible = "at,24c02";
+				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};
 		};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index ccf6c86ed076..30ac6a60f041 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -54,7 +54,7 @@ Example:
 			reg = <2>;
 
 			eeprom@54 {
-				compatible = "at,24c08";
+				compatible = "atmel,24c08";
 				reg = <0x54>;
 			};
 		};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-owl.txt b/Documentation/devicetree/bindings/i2c/i2c-owl.txt
index b743fe444e9f..54c05dbdb2e4 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-owl.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-owl.txt
@@ -2,7 +2,9 @@ Actions Semiconductor Owl I2C controller
 
 Required properties:
 
-- compatible        : Should be "actions,s900-i2c".
+- compatible        : Should be one of the following:
+		      - "actions,s700-i2c" for S700 SoC
+		      - "actions,s900-i2c" for S900 SoC
 - reg               : Offset and length of the register set for the device.
 - #address-cells    : Should be 1.
 - #size-cells       : Should be 0.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index 30c0485b167b..3ee5e8f6ee01 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -7,6 +7,7 @@ Required properties:
 	"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
 	"renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC.
 	"renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC.
+	"renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC.
 	"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
 	"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
 	"renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
index d81b62643655..202602e6e837 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
@@ -8,6 +8,7 @@ Required properties:
 			- "renesas,iic-r8a7744" (RZ/G1N)
 			- "renesas,iic-r8a7745" (RZ/G1E)
 			- "renesas,iic-r8a774a1" (RZ/G2M)
+			- "renesas,iic-r8a774c0" (RZ/G2E)
 			- "renesas,iic-r8a7790" (R-Car H2)
 			- "renesas,iic-r8a7791" (R-Car M2-W)
 			- "renesas,iic-r8a7792" (R-Car V2H)
@@ -16,6 +17,7 @@ Required properties:
 			- "renesas,iic-r8a7795" (R-Car H3)
 			- "renesas,iic-r8a7796" (R-Car M3-W)
 			- "renesas,iic-r8a77965" (R-Car M3-N)
+			- "renesas,iic-r8a77990" (R-Car E3)
 			- "renesas,iic-sh73a0" (SH-Mobile AG5)
 			- "renesas,rcar-gen2-iic" (generic R-Car Gen2 or RZ/G1
 							compatible device)
@@ -28,7 +30,13 @@ Required properties:
 			the platform first followed by the generic R-Car
 			version.
 
-			renesas,rmobile-iic must always follow.
+			When compatible with "renesas,rmobile-iic" it should
+			be the last compatibility string listed.
+
+			The r8a77990 (R-Car E3) and r8a774c0 (RZ/G2E)
+			controllers are not considered compatible with
+			"renesas,rcar-gen3-iic" or "renesas,rmobile-iic"
+			due to the absence of automatic transmission registers.
 
 - reg             : address start and address range size of device
 - interrupts      : interrupt of device
diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
index 3b5489966634..69240e189b01 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
@@ -26,6 +26,11 @@ Optional properties :
 - i2c-scl-falling-time-ns : Only for STM32F7, I2C SCL Falling time for the board
   (default: 10)
   I2C Timings are derived from these 2 values
+- st,syscfg-fmp:  Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG
+  whether Fast Mode Plus speed is selected by slave.
+	1st cell : phandle to syscfg
+	2nd cell : register offset within SYSCFG
+	3rd cell : register bitmask for FMP bit
 
 Example :
 
@@ -53,4 +58,5 @@ Example :
 		clocks = <&rcc 1 CLK_I2C1>;
 		pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>;
 		pinctrl-names = "default";
+		st,syscfg-fmp = <&syscfg 0x4 0x1>;
 	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt
index bd81a482634f..bd81a482634f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt
index 49df0053347a..49df0053347a 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
index 94a425eaa6c7..94a425eaa6c7 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
diff --git a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt
new file mode 100644
index 000000000000..5dc5d2e2573d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt
@@ -0,0 +1,25 @@
+Device-tree bindings for I2C-based On-Chip Controller hwmon device
+------------------------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,p8-occ-hwmon";
+ - reg = <I2C address>;			: I2C bus address
+
+Examples:
+
+    i2c-bus@100 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+        < more properties >
+
+        occ-hwmon@1 {
+            compatible = "ibm,p8-occ-hwmon";
+            reg = <0x50>;
+        };
+
+        occ-hwmon@2 {
+            compatible = "ibm,p8-occ-hwmon";
+            reg = <0x51>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
index 0fbbc6970ec5..42bfc09c8918 100644
--- a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
+++ b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
@@ -22,7 +22,7 @@ Example:
 			#size-cells = <0>;
 
 			eeprom@54 {
-				compatible = "at,24c08";
+				compatible = "atmel,24c08";
 				reg = <0x54>;
 			};
 		};