Merge tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / IIO driver updates from Greg KH:
 "Here is the big staging and iio driver update for 5.2-rc1.

  Lots of tiny fixes all over the staging and IIO driver trees here,
  along with some new IIO drivers.

  The "counter" subsystem was added in here as well, as it is needed by
  the IIO drivers and subsystem.

  Also we ended up deleting two drivers, making this pull request remove
  a few hundred thousand lines of code, always a nice thing to see. Both
  of the drivers removed have been replaced with "real" drivers in their
  various subsystem directories, and they will be coming to you from
  those locations during this merge window.

  There are some core vt/selection changes in here, that was due to some
  cleanups needed for the speakup fixes. Those have all been acked by
  the various subsystem maintainers (i.e. me), so those are ok.

  We also added a few new drivers, for some odd hardware, giving new
  developers plenty to work on with basic coding style cleanups to come
  in the near future.

  Other than that, nothing unusual here.

  All of these have been in linux-next for a while with no reported
  issues, other than an odd gcc warning for one of the new drivers that
  should be fixed up soon"

[ I fixed up the warning myself  - Linus ]

* tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits)
  staging: kpc2000: kpc_spi: Fix build error for {read,write}q
  Staging: rtl8192e: Remove extra space before break statement
  Staging: rtl8192u: ieee80211: Fix if-else indentation warning
  Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces
  staging: most: cdev: fix chrdev_region leak in mod_exit
  staging: wlan-ng: Fix improper SPDX comment style
  staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch
  staging: vc04_services: bcm2835-camera: Compress two lines into one line
  staging: rtl8723bs: core: Use !x in place of NULL comparison.
  staging: rtl8723bs: core: Prefer using the BIT Macro.
  staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling
  staging: kpc2000: fix up build problems with readq()
  staging: rtlwifi: move remaining phydm .h files
  staging: rtlwifi: strip down phydm .h files
  staging: rtlwifi: delete the staging driver
  staging: fieldbus: anybus-s: rename bus id field to avoid confusion
  staging: fieldbus: anybus-s: keep device bus id in bus endianness
  Staging: sm750fb: Change *array into *const array
  staging: rtl8192u: ieee80211: Fix spelling mistake
  staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro
  ...

7 files changed, 140 insertions, 24 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt
index d7b6241ca881..d8652460198e 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt
@@ -7,6 +7,7 @@ Required properties for the AD7606:
 	* "adi,ad7606-8"
 	* "adi,ad7606-6"
 	* "adi,ad7606-4"
+	* "adi,ad7616"
 - reg: SPI chip select number for the device
 - spi-max-frequency: Max SPI frequency to use
 	see: Documentation/devicetree/bindings/spi/spi-bus.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
new file mode 100644
index 000000000000..440e52555349
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
@@ -0,0 +1,48 @@
+* Analog Devices AD7170/AD7171/AD7780/AD7781
+
+Data sheets:
+
+- AD7170:
+	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
+- AD7171:
+	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
+- AD7780:
+	* https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
+- AD7781:
+	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
+
+Required properties:
+
+- compatible: should be one of
+	* "adi,ad7170"
+	* "adi,ad7171"
+	* "adi,ad7780"
+	* "adi,ad7781"
+- reg: spi chip select number for the device
+- vref-supply: the regulator supply for the ADC reference voltage
+
+Optional properties:
+
+- powerdown-gpios:  must be the device tree identifier of the PDRST pin. If
+		    specified, it will be asserted during driver probe. As the
+		    line is active high, it should be marked GPIO_ACTIVE_HIGH.
+- adi,gain-gpios:   must be the device tree identifier of the GAIN pin. Only for
+		    the ad778x chips. If specified, it will be asserted during
+		    driver probe. As the line is active low, it should be marked
+		    GPIO_ACTIVE_LOW.
+- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only
+		    for the ad778x chips. If specified, it will be asserted
+		    during driver probe. As the line is active low, it should be
+		    marked GPIO_ACTIVE_LOW.
+
+Example:
+
+adc@0 {
+	compatible =  "adi,ad7780";
+	reg =	      <0>;
+	vref-supply = <&vdd_supply>
+
+	powerdown-gpios  = <&gpio 12 GPIO_ACTIVE_HIGH>;
+	adi,gain-gpios   = <&gpio  5 GPIO_ACTIVE_LOW>;
+	adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
index 75c775954102..d57e9df25f4f 100644
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
@@ -9,6 +9,7 @@ Required properties:
 			- "amlogic,meson-gxl-saradc" for GXL
 			- "amlogic,meson-gxm-saradc" for GXM
 			- "amlogic,meson-axg-saradc" for AXG
+			- "amlogic,meson-g12a-saradc" for AXG
 		along with the generic "amlogic,meson-saradc"
 - reg:		the physical base address and length of the registers
 - interrupts:	the interrupt indicating end of sampling
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
deleted file mode 100644
index 7222328a3d0d..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* AVIA HX711 ADC chip for weight cells
-  Bit-banging driver
-
-Required properties:
- - compatible:	Should be "avia,hx711"
- - sck-gpios:	Definition of the GPIO for the clock
- - dout-gpios:	Definition of the GPIO for data-out
-		See Documentation/devicetree/bindings/gpio/gpio.txt
- - avdd-supply:	Definition of the regulator used as analog supply
-
-Optional properties:
- - clock-frequency:	Frequency of PD_SCK in Hz
-			Minimum value allowed is 10 kHz because of maximum
-			high time of 50 microseconds.
-
-Example:
-weight {
-	compatible = "avia,hx711";
-	sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
-	dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-	avdd-suppy = <&avdd>;
-	clock-frequency = <100000>;
-};
-
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
new file mode 100644
index 000000000000..8a4100ceeaf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AVIA HX711 ADC chip for weight cells
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Bit-banging driver using two GPIOs:
+  - sck-gpio gives a clock to the sensor with 24 cycles for data retrieval
+    and up to 3 cycles for selection of the input channel and gain for the
+    next measurement
+  - dout-gpio is the sensor data the sensor responds to the clock
+
+  Specifications about the driver can be found at:
+  http://www.aviaic.com/ENProducts.aspx
+
+properties:
+  compatible:
+    enum:
+      - avia,hx711
+
+  sck-gpios:
+    description:
+      Definition of the GPIO for the clock (output). In the datasheet it is
+      named PD_SCK
+    maxItems: 1
+
+  dout-gpios:
+    description:
+      Definition of the GPIO for the data-out sent by the sensor in
+      response to the clock (input).
+      See Documentation/devicetree/bindings/gpio/gpio.txt for information
+      on how to specify a consumer gpio.
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog supply
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 20000
+    maximum: 2500000
+    default: 400000
+
+required:
+  - compatible
+  - sck-gpios
+  - dout-gpios
+  - avdd-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    weight {
+        compatible = "avia,hx711";
+        sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+        dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+        avdd-suppy = <&avdd>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt
index b3629d3a9adf..3a1bc669bd51 100644
--- a/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt
@@ -6,6 +6,10 @@ Required properties:
   region.
 - interrupts: The ADC interrupt
 
+Optional:
+ - vref-supply: The regulator supply ADC reference voltage, optional
+   for legacy reason, but highly encouraging to us in new device tree
+
 Example:
 
 	adc@40048000 {
@@ -13,4 +17,5 @@ Example:
 		reg = <0x40048000 0x1000>;
 		interrupt-parent = <&mic>;
 		interrupts = <39 0>;
+		vref-supply = <&vcc>;
 	};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
new file mode 100644
index 000000000000..e47c3759a82b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
@@ -0,0 +1,19 @@
+* Texas Instruments ADS8344 A/DC chip
+
+Required properties:
+ - compatible: Must be "ti,ads8344"
+ - reg: SPI chip select number for the device
+ - vref-supply: phandle to a regulator node that supplies the
+   reference voltage
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "ti,ads8344";
+	reg = <0>;
+	vref-supply = <&refin_supply>;
+	spi-max-frequency = <10000000>;
+};