Input: auo_pixcir_ts - add devicetree support

Add the necessary code to create the needed platformdata from devicetree
informations.

The interrupt mode of the chip is not set via devicetree, as it is not
a property of the hardware but instead only a preferred type of operation.
This should probably be made settable via configfs in the future.
The option set as default is the mode the datasheet mentions as default.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

1 files changed, 30 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
new file mode 100644
index 000000000000..f40f21c642b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
@@ -0,0 +1,30 @@
+* AUO in-cell touchscreen controller using Pixcir sensors
+
+Required properties:
+- compatible: must be "auo,auo_pixcir_ts"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- gpios: gpios the chip is connected to
+  first one is the interrupt gpio and second one the reset gpio
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		auo_pixcir_ts@5c {
+			compatible = "auo,auo_pixcir_ts";
+			reg = <0x5c>;
+			interrupts = <2 0>;
+
+			gpios = <&gpf 2 0 2>, /* INT */
+				<&gpf 5 1 0>; /* RST */
+
+			x-size = <800>;
+			y-size = <600>;
+		};
+
+		/* ... */
+	};