Merge tag 'mailbox-v4.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jassi Brar:

 - xgene: potential null pointer fix

 - omap: switch to spdx license and use of_device_get_match_data() to
   match data

 - ti-msgmgr: cleanup and optimisation. New TI specific feature - secure
   proxy thread.

 - mediatek: add driver for CMDQ controller.

 - nxp: add driver for MU controller

* tag 'mailbox-v4.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: Add support for i.MX messaging unit
  dt-bindings: mailbox: imx-mu: add generic MU channel support
  dt-bindings: arm: fsl: add mu binding doc
  mailbox: add MODULE_LICENSE() for mtk-cmdq-mailbox.c
  mailbox: mediatek: Add Mediatek CMDQ driver
  dt-bindings: soc: Add documentation for the MediaTek GCE unit
  mailbox: ti-msgmgr: Add support for Secure Proxy
  dt-bindings: mailbox: Add support for secure proxy threads
  mailbox: ti-msgmgr: Move the memory region name to descriptor
  mailbox: ti-msgmgr: Change message count mask to be descriptor based
  mailbox: ti-msgmgr: Allocate Rx channel resources only on request
  mailbox: ti-msgmgr: Get rid of unused structure members
  mailbox/omap: use of_device_get_match_data() to get match data
  mailbox/omap: switch to SPDX license identifier
  mailbox: xgene-slimpro: Fix potential NULL pointer dereference

1 files changed, 57 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
new file mode 100644
index 000000000000..7d72b21c9e94
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -0,0 +1,57 @@
+MediaTek GCE
+===============
+
+The Global Command Engine (GCE) is used to help read/write registers with
+critical time limitation, such as updating display configuration during the
+vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
+
+CMDQ driver uses mailbox framework for communication. Please refer to
+mailbox.txt for generic information about mailbox device-tree bindings.
+
+Required properties:
+- compatible: Must be "mediatek,mt8173-gce"
+- reg: Address range of the GCE unit
+- interrupts: The interrupt signal from the GCE block
+- clock: Clocks according to the common clock binding
+- clock-names: Must be "gce" to stand for GCE clock
+- #mbox-cells: Should be 3.
+	<&phandle channel priority atomic_exec>
+	phandle: Label name of a gce node.
+	channel: Channel of mailbox. Be equal to the thread id of GCE.
+	priority: Priority of GCE thread.
+	atomic_exec: GCE processing continuous packets of commands in atomic
+		way.
+
+Required properties for a client device:
+- mboxes: Client use mailbox to communicate with GCE, it should have this
+  property and list of phandle, mailbox specifiers.
+- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
+  to the register address.
+
+Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'. Such as
+sub-system ids, thread priority, event ids.
+
+Example:
+
+	gce: gce@10212000 {
+		compatible = "mediatek,mt8173-gce";
+		reg = <0 0x10212000 0 0x1000>;
+		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_GCE>;
+		clock-names = "gce";
+		thread-num = CMDQ_THR_MAX_COUNT;
+		#mbox-cells = <3>;
+	};
+
+Example for a client device:
+
+	mmsys: clock-controller@14000000 {
+		compatible = "mediatek,mt8173-mmsys";
+		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
+			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
+		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
+		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
+				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+
+		...
+	};