Merge tag 'media/v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - addition of fwnode support at V4L2 core

 - addition of a few more SDR formats

 - new imx driver to support i.MX6 cameras

 - new driver for Qualcon venus codecs

 - new I2C sensor drivers: dw9714, max2175, ov13858, ov5640

 - new CEC driver: stm32-cec

 - some improvements to DVB frontend documentation and a few fixups

 - several driver improvements and fixups

* tag 'media/v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (361 commits)
  [media] media: entity: Catch unbalanced media_pipeline_stop calls
  [media] media/uapi/v4l: clarify cropcap/crop/selection behavior
  [media] v4l2-ioctl/exynos: fix G/S_SELECTION's type handling
  [media] vimc: sen: Declare vimc_sen_video_ops as static
  [media] vimc: sca: Add scaler
  [media] vimc: deb: Add debayer filter
  [media] vimc: Subdevices as modules
  [media] vimc: cap: Support several image formats
  [media] vimc: sen: Support several image formats
  [media] vimc: common: Add vimc_colorimetry_clamp
  [media] vimc: common: Add vimc_link_validate
  [media] vimc: common: Add vimc_pipeline_s_stream helper
  [media] vimc: common: Add vimc_ent_sd_* helper
  [media] vimc: Move common code from the core
  [media] vimc: sen: Integrate the tpg on the sensor
  [media] media: i2c: ov772x: Force use of SCCB protocol
  [media] dvb uapi docs: enums are passed by value, not reference
  [media] dvb: don't use 'time_t' in event ioctl
  [media] media: venus: enable building with COMPILE_TEST
  [media] af9013: refactor power control
  ...

1 files changed, 45 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt
new file mode 100644
index 000000000000..540b36c4b1f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov5640.txt
@@ -0,0 +1,45 @@
+* Omnivision OV5640 MIPI CSI-2 sensor
+
+Required Properties:
+- compatible: should be "ovti,ov5640"
+- clocks: reference to the xclk input clock.
+- clock-names: should be "xclk".
+- DOVDD-supply: Digital I/O voltage supply, 1.8 volts
+- AVDD-supply: Analog voltage supply, 2.8 volts
+- DVDD-supply: Digital core voltage supply, 1.5 volts
+
+Optional Properties:
+- reset-gpios: reference to the GPIO connected to the reset pin, if any.
+	       This is an active low signal to the OV5640.
+- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
+		   if any. This is an active high signal to the OV5640.
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+&i2c1 {
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v */
+		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_from_ov5640>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};