diff options
author | Jacopo Mondi <jacopo+renesas@jmondi.org> | 2019-12-11 18:13:00 +0100 |
---|---|---|
committer | Rob Herring <robh@kernel.org> | 2019-12-20 14:16:46 -0700 |
commit | 58361eaa11d561f338e45558c4cfce03366817c8 (patch) | |
tree | 981fec2d5fa327294773fdd4fc3356bb99bdc391 /Documentation/devicetree/bindings/media/renesas,ceu.txt | |
parent | dt-bindings: watchdog: Convert stm32 watchdog bindings to json-schema (diff) | |
download | linux-dev-58361eaa11d561f338e45558c4cfce03366817c8.tar.xz linux-dev-58361eaa11d561f338e45558c4cfce03366817c8.zip |
dt-bindings: media: renesas,ceu: Convert to yaml
Convert the Renesas CEU bindings description to yaml schema and remove
the existing textual bindings document.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/media/renesas,ceu.txt')
-rw-r--r-- | Documentation/devicetree/bindings/media/renesas,ceu.txt | 86 |
1 files changed, 0 insertions, 86 deletions
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.txt b/Documentation/devicetree/bindings/media/renesas,ceu.txt deleted file mode 100644 index 3e2a2652eb19..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,ceu.txt +++ /dev/null @@ -1,86 +0,0 @@ -Renesas Capture Engine Unit (CEU) ----------------------------------------------- - -The Capture Engine Unit is the image capture interface found in the Renesas -SH Mobile, R-Mobile and RZ SoCs. - -The interface supports a single parallel input with data bus width of 8 or 16 -bits. - -Required properties: -- compatible: Shall be one of the following values: - "renesas,r7s72100-ceu" for CEU units found in RZ/A1H and RZ/A1M SoCs - "renesas,r8a7740-ceu" for CEU units found in R-Mobile A1 R8A7740 SoCs -- reg: Registers address base and size. -- interrupts: The interrupt specifier. - -The CEU supports a single parallel input and should contain a single 'port' -subnode with a single 'endpoint'. Connection to input devices are modeled -according to the video interfaces OF bindings specified in: -[1] Documentation/devicetree/bindings/media/video-interfaces.txt - -Optional endpoint properties applicable to parallel input bus described in -the above mentioned "video-interfaces.txt" file are supported. - -- hsync-active: See [1] for description. If property is not present, - default is active high. -- vsync-active: See [1] for description. If property is not present, - default is active high. -- bus-width: See [1] for description. Accepted values are '8' and '16'. - If property is not present, default is '8'. -- field-even-active: See [1] for description. If property is not present, - an even field is identified by a logic 0 (active-low signal). - -Example: - -The example describes the connection between the Capture Engine Unit and an -OV7670 image sensor connected to i2c1 interface. - -ceu: ceu@e8210000 { - reg = <0xe8210000 0x209c>; - compatible = "renesas,r7s72100-ceu"; - interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&vio_pins>; - - status = "okay"; - - port { - ceu_in: endpoint { - remote-endpoint = <&ov7670_out>; - - hsync-active = <1>; - vsync-active = <0>; - }; - }; -}; - -i2c1: i2c@fcfee400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - status = "okay"; - - clock-frequency = <100000>; - - ov7670: camera@21 { - compatible = "ovti,ov7670"; - reg = <0x21>; - - pinctrl-names = "default"; - pinctrl-0 = <&vio_pins>; - - reset-gpios = <&port3 11 GPIO_ACTIVE_LOW>; - powerdown-gpios = <&port3 12 GPIO_ACTIVE_HIGH>; - - port { - ov7670_out: endpoint { - remote-endpoint = <&ceu_in>; - - hsync-active = <1>; - vsync-active = <0>; - }; - }; - }; -}; |