Merge tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...

8 files changed, 238 insertions, 104 deletions

diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
index 98c1bdde9a86..dea36d68cdbe 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
@@ -60,9 +60,7 @@ required:
   - clocks
   - clock-names
 
-# FIXME: We should set it, but it would report all the generic
-# properties as additional properties.
-# additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
new file mode 100644
index 000000000000..41197578f19a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/amlogic,meson-gx-ao-cec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson AO-CEC Controller
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+  The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
+  to handle communication between HDMI connected devices over the CEC bus.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gx-ao-cec # GXBB, GXL, GXM, G12A and SM1 AO_CEC_A module
+      - amlogic,meson-g12a-ao-cec # G12A AO_CEC_B module
+      - amlogic,meson-sm1-ao-cec # SM1 AO_CEC_B module
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  hdmi-phandle:
+    description: phandle to the HDMI controller
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-gx-ao-cec
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AO-CEC clock
+
+        clock-names:
+          maxItems: 1
+          items:
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-g12a-ao-cec
+              - amlogic,meson-sm1-ao-cec
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AO-CEC clock generator source
+
+        clock-names:
+          maxItems: 1
+          items:
+            - const: oscin
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - hdmi-phandle
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    cec_AO: cec@100 {
+        compatible = "amlogic,meson-gx-ao-cec";
+        reg = <0x0 0x00100 0x0 0x14>;
+        interrupts = <199>;
+        clocks = <&clkc_cec>;
+        clock-names = "core";
+        hdmi-phandle = <&hdmi_tx>;
+    };
+
diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt
deleted file mode 100644
index ad92ee41c0dd..000000000000
--- a/Documentation/devicetree/bindings/media/meson-ao-cec.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Amlogic Meson AO-CEC driver
-
-The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
-to handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be following depending on the SoC :
-	For GXBB, GXL, GXM, G12A and SM1 (AO_CEC_A module) :
-	"amlogic,meson-gx-ao-cec"
-	For G12A (AO_CEC_B module) :
-	"amlogic,meson-g12a-ao-cec"
-	For SM1 (AO_CEC_B module) :
-	"amlogic,meson-sm1-ao-cec"
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : AO-CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to AO-CEC clock.
-  - clock-names : from common clock binding, must contain :
-		For GXBB, GXL, GXM, G12A and SM1 (AO_CEC_A module) :
-		- "core"
-		For G12A, SM1 (AO_CEC_B module) :
-		- "oscin"
-		corresponding to entry in the clocks property.
-  - hdmi-phandle: phandle to the HDMI controller
-
-Example:
-
-cec_AO: cec@100 {
-	compatible = "amlogic,meson-gx-ao-cec";
-	reg = <0x0 0x00100 0x0 0x14>;
-	interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
-	clock-names = "core";
-	hdmi-phandle = <&hdmi_tx>;
-};
diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
index cdfc8ee023ac..d11380794ff4 100644
--- a/Documentation/devicetree/bindings/media/rc.yaml
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@@ -83,6 +83,7 @@ properties:
           - rc-it913x-v1
           - rc-it913x-v2
           - rc-kaiomy
+          - rc-khadas
           - rc-kworld-315u
           - rc-kworld-pc150u
           - rc-kworld-plus-tv-analog
@@ -100,6 +101,7 @@ properties:
           - rc-nec-terratec-cinergy-xs
           - rc-norwood
           - rc-npgtech
+          - rc-odroid
           - rc-pctv-sedna
           - rc-pinnacle-color
           - rc-pinnacle-grey
@@ -120,6 +122,7 @@ properties:
           - rc-streamzap
           - rc-su3000
           - rc-tango
+          - rc-tanix-tx3mini
           - rc-tbs-nec
           - rc-technisat-ts35
           - rc-technisat-usb2
@@ -139,7 +142,10 @@ properties:
           - rc-videomate-k100
           - rc-videomate-s350
           - rc-videomate-tv-pvr
+          - rc-wetek-hub
+          - rc-wetek-play2
           - rc-winfast
           - rc-winfast-usbii-deluxe
+          - rc-x96max
           - rc-xbox-dvd
           - rc-zx-irdec
diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.txt b/Documentation/devicetree/bindings/media/st,stm32-cec.txt
deleted file mode 100644
index 6be2381c180d..000000000000
--- a/Documentation/devicetree/bindings/media/st,stm32-cec.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-STMicroelectronics STM32 CEC driver
-
-Required properties:
- - compatible : value should be "st,stm32-cec"
- - reg : Physical base address of the IP registers and length of memory
-	 mapped region.
- - clocks : from common clock binding: handle to CEC clocks
- - clock-names : from common clock binding: must be "cec" and "hdmi-cec".
- - interrupts : CEC interrupt number to the CPU.
-
-Example for stm32f746:
-
-cec: cec@40006c00 {
-	compatible = "st,stm32-cec";
-	reg = <0x40006C00 0x400>;
-	interrupts = <94>;
-	clocks = <&rcc 0 STM32F7_APB1_CLOCK(CEC)>, <&rcc 1 CLK_HDMI_CEC>;
-	clock-names = "cec", "hdmi-cec";
-};
diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
new file mode 100644
index 000000000000..d75019c093a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 CEC bindings
+
+maintainers:
+  - Benjamin Gaignard <benjamin.gaignard@st.com>
+  - Yannick Fertre <yannick.fertre@st.com>
+
+properties:
+  compatible:
+    const: st,stm32-cec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Module Clock
+      - description: Bus Clock
+
+  clock-names:
+    items:
+      - const: cec
+      - const: hdmi-cec
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    cec: cec@40006c00 {
+        compatible = "st,stm32-cec";
+        reg = <0x40006c00 0x400>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc CEC_K>, <&clk_lse>;
+        clock-names = "cec", "hdmi-cec";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt b/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
deleted file mode 100644
index 3122ded82eb4..000000000000
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-STMicroelectronics STM32 Digital Camera Memory Interface (DCMI)
-
-Required properties:
-- compatible: "st,stm32-dcmi"
-- reg: physical base address and length of the registers set for the device
-- interrupts: should contain IRQ line for the DCMI
-- resets: reference to a reset controller,
-          see Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
-- clocks: list of clock specifiers, corresponding to entries in
-          the clock-names property
-- clock-names: must contain "mclk", which is the DCMI peripherial clock
-- pinctrl: the pincontrol settings to configure muxing properly
-           for pins that connect to DCMI device.
-           See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml.
-- dmas: phandle to DMA controller node,
-        see Documentation/devicetree/bindings/dma/stm32-dma.txt
-- dma-names: must contain "tx", which is the transmit channel from DCMI to DMA
-
-DCMI supports a single port node with parallel bus. It should contain one
-'port' child node with child 'endpoint' node. Please refer to the bindings
-defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	dcmi: dcmi@50050000 {
-		compatible = "st,stm32-dcmi";
-		reg = <0x50050000 0x400>;
-		interrupts = <78>;
-		resets = <&rcc STM32F4_AHB2_RESET(DCMI)>;
-		clocks = <&rcc 0 STM32F4_AHB2_CLOCK(DCMI)>;
-		clock-names = "mclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&dcmi_pins>;
-		dmas = <&dma2 1 1 0x414 0x3>;
-		dma-names = "tx";
-		port {
-			dcmi_0: endpoint {
-				remote-endpoint = <...>;
-				bus-width = <8>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				pclk-sample = <1>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
new file mode 100644
index 000000000000..3fe778cb5cc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dcmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) binding
+
+maintainers:
+  - Hugues Fruchet <hugues.fruchet@st.com>
+
+properties:
+  compatible:
+    const: st,stm32-dcmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      DCMI supports a single port node with parallel bus. It should contain
+      one 'port' child node with child 'endpoint' node. Please refer to the
+      bindings defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    dcmi: dcmi@4c006000 {
+        compatible = "st,stm32-dcmi";
+        reg = <0x4c006000 0x400>;
+        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&rcc CAMITF_R>;
+        clocks = <&rcc DCMI>;
+        clock-names = "mclk";
+        dmas = <&dmamux1 75 0x400 0x0d>;
+        dma-names = "tx";
+
+        port {
+             dcmi_0: endpoint {
+                   remote-endpoint = <&ov5640_0>;
+                   bus-width = <8>;
+                   hsync-active = <0>;
+                   vsync-active = <0>;
+                   pclk-sample = <1>;
+             };
+        };
+    };
+
+...