diff options
| author |   Tony Lindgren <tony@atomide.com> | 2014-05-20 11:17:54 -0700 |
|---|---|---|
| committer |   Lee Jones <lee.jones@linaro.org> | 2014-05-28 08:05:46 +0100 |
| commit | 76714d2c090f836fe005008116075a7b5bfde852 (patch) | |
| tree | 9f787b0187d7a4f6648c1a8176a2855983159eed /Documentation/devicetree/bindings/mfd/twl4030-power.txt | |
| parent | mfd: twl4030-power: Add generic reset configuration (diff) | |
| download | linux-dev-76714d2c090f836fe005008116075a7b5bfde852.tar.xz linux-dev-76714d2c090f836fe005008116075a7b5bfde852.zip | |
mfd: twl4030-power: Add recommended idle configuration
These settings are based on the "Recommended Sleep Sequences for
the Zoom Platform".
The settings assume most of the regulators are under control of
Linux, and twl4030 only cuts off VDD1 and VDD2 during off-idle as
Linux cannot do it.
For any board specific changes to these, let's patch them in as
changes to the generic data in the follow-up patches. This keeps
the board specific changes small.
Note that this does not consider the twl5030 errata 27 and 28.
That can be added later on after it has been tested. For more
information about errata 27 and 28.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/mfd/twl4030-power.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/twl4030-power.txt | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt index b90611650cd9..bbd66039202a 100644 --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt @@ -8,10 +8,14 @@ Required properties: - compatible : must be one of the following "ti,twl4030-power" "ti,twl4030-power-reset" + "ti,twl4030-power-idle" The use of ti,twl4030-power-reset is recommended at least on 3530 that needs a special configuration for warm reset to work. +When using ti,twl4030-power-idle, the TI recommended configuration +for idle modes is loaded to the tlw4030 PMIC. + Optional properties: - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the system poweroffs. |