diff options
author | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2018-04-04 16:11:49 -0700 |
---|---|---|
committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2018-04-04 16:11:49 -0700 |
commit | 664b0bae0b87f69bc9deb098f5e0158b9cf18e04 (patch) | |
tree | d5841492b396ff483723b9339c7c11dc33b67688 /Documentation/devicetree/bindings/mfd | |
parent | Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370 (diff) | |
parent | Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad (diff) | |
download | linux-dev-664b0bae0b87f69bc9deb098f5e0158b9cf18e04.tar.xz linux-dev-664b0bae0b87f69bc9deb098f5e0158b9cf18e04.zip |
Merge branch 'next' into for-linus
Prepare input updates for 4.17 merge window.
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
16 files changed, 161 insertions, 50 deletions
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index b37bdde5cfda..bdd017686ea5 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -65,45 +65,6 @@ Optional properties: a value that is out of range for a 16 bit register then the chip default will be used. If present exactly five values must be specified. - - wlf,inmode : A list of INn_MODE register values, where n is the number - of input signals. Valid values are 0 (Differential), 1 (Single-ended) and - 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. - If present, values must be specified less than or equal to the number of - input signals. If values less than the number of input signals, elements - that have not been specified are set to 0 by default. Entries are: - <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997) - <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814) - - wlf,out-mono : A list of boolean values indicating whether each output is - mono or stereo. Position within the list indicates the output affected - (eg. First entry in the list corresponds to output 1). A non-zero value - indicates a mono output. If present, the number of values should be less - than or equal to the number of outputs, if less values are supplied the - additional outputs will be treated as stereo. - - - wlf,dmic-ref : DMIC reference voltage source for each input, can be - selected from either MICVDD or one of the MICBIAS's, defines - (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If - present, the number of values should be less than or equal to the - number of inputs, unspecified inputs will use the chip default. - - - wlf,max-channels-clocked : The maximum number of channels to be clocked on - each AIF, useful for I2S systems with multiple data lines being mastered. - Specify one cell for each AIF to be configured, specify zero for AIFs that - should be handled normally. - If present, number of cells must be less than or equal to the number of - AIFs. If less than the number of AIFs, for cells that have not been - specified the corresponding AIFs will be treated as default setting. - - - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt @@ -112,6 +73,7 @@ Optional properties: Also see child specific device properties: Regulator - ../regulator/arizona-regulator.txt Extcon - ../extcon/extcon-arizona.txt + Sound - ../sound/arizona.txt Example: diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt index 4fc5b83726d6..ce8cf0ec6279 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt @@ -9,10 +9,16 @@ Required properties: "aspeed,g5-scu", "syscon", "simple-mfd" - reg: contains the offset and length of the SCU memory region +- #clock-cells: should be set to <1> - the system controller is also a + clock provider +- #reset-cells: should be set to <1> - the system controller is also a + reset line provider Example: syscon: syscon@1e6e2000 { compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt new file mode 100644 index 000000000000..c4a83e364cb6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt @@ -0,0 +1,56 @@ +* Device tree bindings for Atmel Timer Counter Blocks +- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon". + <chip> can be "at91rm9200" or "at91sam9x5" +- reg: Should contain registers location and length +- #address-cells: has to be 1 +- #size-cells: has to be 0 +- interrupts: Should contain all interrupts for the TC block + Note that you can specify several interrupt cells if the TC + block has one interrupt per channel. +- clock-names: tuple listing input clock names. + Required elements: "t0_clk", "slow_clk" + Optional elements: "t1_clk", "t2_clk" +- clocks: phandles to input clocks. + +The TCB can expose multiple subdevices: + * a timer + - compatible: Should be "atmel,tcb-timer" + - reg: Should contain the TCB channels to be used. If the + counter width is 16 bits (at91rm9200-tcb), two consecutive + channels are needed. Else, only one channel will be used. + +Examples: + +One interrupt per TC block: + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + +One interrupt per TC channel in a TC block: + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfffdc000 0x100>; + interrupts = <26 4>, <27 4>, <28 4>; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt new file mode 100644 index 000000000000..82f82e069563 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt @@ -0,0 +1,16 @@ +Broadcom iProc Chip Device Resource Unit (CDRU) + +Various Broadcom iProc SoCs have a set of registers that provide various +chip specific device and resource configurations. This node allows access to +these CDRU registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-cdru", "syscon" for Stingray +- reg: base address and range of the CDRU registers + +Example: + cdru: syscon@6641d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0 0x6641d000 0 0x400>; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt new file mode 100644 index 000000000000..4421e9771b8a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt @@ -0,0 +1,18 @@ +Broadcom iProc Multi Host Bridge (MHB) + +Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls +the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint +interface; 3) access to the Nitro (network processing) engine + +This node allows access to these MHB registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-mhb", "syscon" for Stingray +- reg: base address and range of the MHB registers + +Example: + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt index 136e0c2da44d..6245c9b1a68b 100644 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt @@ -41,7 +41,7 @@ Optional properties (all): Example for I2C: -i2c@12CA0000 { +i2c@12ca0000 { cros-ec@1e { reg = <0x1e>; compatible = "google,cros-ec-i2c"; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index 741e76688cf2..0f2587fa42cb 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -19,7 +19,7 @@ Required properties: Example: - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt index 6a1ae3a2b77f..e6754974a745 100644 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/Documentation/devicetree/bindings/mfd/max77693.txt @@ -127,6 +127,12 @@ Required properties for the LED child node: Optional properties for the LED child node: - label : see Documentation/devicetree/bindings/leds/common.txt +Optional nodes: +- max77693-muic : + Node used only by extcon consumers. + Required properties: + - compatible : "maxim,max77693-muic" + Example: #include <dt-bindings/leds/common.h> diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt index 51fc1a60caa5..f2f3fe75901c 100644 --- a/Documentation/devicetree/bindings/mfd/max77802.txt +++ b/Documentation/devicetree/bindings/mfd/max77802.txt @@ -18,7 +18,7 @@ Required properties: Example: - max77802: pmic@09 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&intc>; interrupts = <26 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index 39ba4146769d..8261ea73278a 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -113,7 +113,6 @@ MC13892 regulators: Examples: ecspi@70010000 { /* ECSPI1 */ - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ <&gpio4 25 0>; /* GPIO4_25 */ @@ -131,7 +130,7 @@ ecspi@70010000 { /* ECSPI1 */ #size-cells = <0>; led-control = <0x000 0x000 0x0e0 0x000>; - sysled { + sysled@3 { reg = <3>; label = "system:red:live"; linux,default-trigger = "heartbeat"; diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt index bcb6abb9d413..336c0495c8a3 100644 --- a/Documentation/devicetree/bindings/mfd/mfd.txt +++ b/Documentation/devicetree/bindings/mfd/mfd.txt @@ -41,7 +41,7 @@ foo@1000 { compatible = "syscon", "simple-mfd"; reg = <0x01000 0x1000>; - led@08.0 { + led@8.0 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x01>; diff --git a/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt new file mode 100644 index 000000000000..21b9a897fca5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt @@ -0,0 +1,40 @@ +Spreadtrum SC27xx Power Management Integrated Circuit (PMIC) + +The Spreadtrum SC27xx series PMICs contain SC2720, SC2721, SC2723, SC2730 +and SC2731. The Spreadtrum PMIC belonging to SC27xx series integrates all +mobile handset power management, audio codec, battery management and user +interface support function in a single chip. It has 6 major functional +blocks: +- DCDCs to support CPU, memory. +- LDOs to support both internal and external requirement. +- Battery management system, such as charger, fuel gauge. +- Audio codec. +- User interface function, such as indicator, flash LED and so on. +- IC level interface, such as power on/off control, RTC and typec and so on. + +Required properties: +- compatible: Should be one of the following: + "sprd,sc2720" + "sprd,sc2721" + "sprd,sc2723" + "sprd,sc2730" + "sprd,sc2731" +- reg: The address of the device chip select, should be 0. +- spi-max-frequency: Typically set to 26000000. +- interrupts: The interrupt line the device is connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: The number of cells to describe an PMIC IRQ, must be 2. +- #address-cells: Child device offset number of cells, must be 1. +- #size-cells: Child device size number of cells, must be 0. + +Example: +pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt index badff3611a98..86dd8191b04c 100644 --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt @@ -10,7 +10,7 @@ Required properties: - #io-channel-cells: shall be 0, Example: - ths: ths@01c25000 { + ths: ths@1c25000 { compatible = "allwinner,sun8i-a33-ths"; reg = <0x01c25000 0x100>; #thermal-sensor-cells = <0>; @@ -47,7 +47,7 @@ Optional properties: Example: - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index 03c5a551da55..dd2c06540485 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -15,7 +15,7 @@ The prcm node may contain several subdevices definitions: Example: - prcm: prcm@01f01400 { + prcm: prcm@1f01400 { compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt index 408f768686f1..25d9e9c2fd53 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.txt +++ b/Documentation/devicetree/bindings/mfd/syscon.txt @@ -16,9 +16,17 @@ Required properties: Optional property: - reg-io-width: the size (in bytes) of the IO accesses that should be performed on the device. +- hwlocks: reference to a phandle of a hardware spinlock provider node. Examples: -gpr: iomuxc-gpr@020e0000 { +gpr: iomuxc-gpr@20e0000 { compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e0000 0x38>; + hwlocks = <&hwlock1 1>; +}; + +hwlock1: hwspinlock@40500000 { + ... + reg = <0x40500000 0x1000>; + #hwlock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt index 20963c76b4bc..71a1f5963936 100644 --- a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt +++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt @@ -13,7 +13,7 @@ Required properties: Example: -devctrl: device-state-control@0x02620000 { +devctrl: device-state-control@02620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; |