Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...

4 files changed, 67 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt b/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt
new file mode 100644
index 000000000000..d4e0141d3620
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt
@@ -0,0 +1,37 @@
+* Interrupt Controller
+
+Properties:
+- compatible: "brcm,bcm3384-intc"
+
+  Compatibility with BCM3384 and possibly other BCM33xx/BCM63xx SoCs.
+
+- reg: Address/length pairs for each mask/status register set.  Length must
+  be 8.  If multiple register sets are specified, the first set will
+  handle IRQ offsets 0..31, the second set 32..63, and so on.
+
+- interrupt-controller: This is an interrupt controller.
+
+- #interrupt-cells: Must be <1>.  Just a simple IRQ offset; no level/edge
+  or polarity configuration is possible with this controller.
+
+- interrupt-parent: This controller is cascaded from a MIPS CPU HW IRQ, or
+  from another INTC.
+
+- interrupts: The IRQ on the parent controller.
+
+Example:
+	periph_intc: periph_intc@14e00038 {
+		compatible = "brcm,bcm3384-intc";
+
+		/*
+		 * IRQs 0..31:  mask reg 0x14e00038, status reg 0x14e0003c
+		 * IRQs 32..63: mask reg 0x14e00340, status reg 0x14e00344
+		 */
+		reg = <0x14e00038 0x8 0x14e00340 0x8>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <4>;
+	};
diff --git a/Documentation/devicetree/bindings/mips/brcm/bmips.txt b/Documentation/devicetree/bindings/mips/brcm/bmips.txt
new file mode 100644
index 000000000000..8ef71b4085ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/bmips.txt
@@ -0,0 +1,8 @@
+* Broadcom MIPS (BMIPS) CPUs
+
+Required properties:
+- compatible: "brcm,bmips3300", "brcm,bmips4350", "brcm,bmips4380",
+  "brcm,bmips5000"
+
+- mips-hpt-frequency: This is common to all CPUs in the system so it lives
+  under the "cpus" node.
diff --git a/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt b/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt
new file mode 100644
index 000000000000..8a139cb3c0b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt
@@ -0,0 +1,11 @@
+* Broadcom cable/DSL platforms
+
+SoCs:
+
+Required properties:
+- compatible: "brcm,bcm3384", "brcm,bcm33843"
+
+Boards:
+
+Required properties:
+- compatible: "brcm,bcm93384wvg"
diff --git a/Documentation/devicetree/bindings/mips/brcm/usb.txt b/Documentation/devicetree/bindings/mips/brcm/usb.txt
new file mode 100644
index 000000000000..452c45c7bf29
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/usb.txt
@@ -0,0 +1,11 @@
+* Broadcom USB controllers
+
+Required properties:
+- compatible: "brcm,bcm3384-ohci", "brcm,bcm3384-ehci"
+
+  These currently use the generic-ohci and generic-ehci drivers.  On some
+  systems, special handling may be needed in the following cases:
+
+  - Restoring state after systemwide power save modes
+  - Sharing PHYs with the USBD (UDC) hardware
+  - Figuring out which controllers are disabled on ASIC bondout variants