diff options
author | Frieder Schrempf <frieder.schrempf@kontron.de> | 2019-01-07 09:29:49 +0000 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2019-01-07 16:56:40 +0000 |
commit | 80261459804507a349daf754d6e5d835bb8578ae (patch) | |
tree | 2545171d1c9d41b0d3beddcc9fc300057e686a1b /Documentation/devicetree/bindings/mtd/fsl-quadspi.txt | |
parent | spi: Add a driver for the Freescale/NXP QuadSPI controller (diff) | |
download | linux-dev-80261459804507a349daf754d6e5d835bb8578ae.tar.xz linux-dev-80261459804507a349daf754d6e5d835bb8578ae.zip |
dt-bindings: spi: Move the bindings for the FSL QSPI driver
Move the documentation of the old SPI NOR driver to the place of the new
SPI memory interface based driver.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/fsl-quadspi.txt')
-rw-r--r-- | Documentation/devicetree/bindings/mtd/fsl-quadspi.txt | 65 |
1 files changed, 0 insertions, 65 deletions
diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt deleted file mode 100644 index 483e9cfac1b1..000000000000 --- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt +++ /dev/null @@ -1,65 +0,0 @@ -* Freescale Quad Serial Peripheral Interface(QuadSPI) - -Required properties: - - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi", - "fsl,imx7d-qspi", "fsl,imx6ul-qspi", - "fsl,ls1021a-qspi" - or - "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi", - "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi" - - reg : the first contains the register location and length, - the second contains the memory mapping address and length - - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory" - - interrupts : Should contain the interrupt for the device - - clocks : The clocks needed by the QuadSPI controller - - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi". - -Optional properties: - - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B. - Each bus can be connected with two NOR flashes. - Most of the time, each bus only has one NOR flash - connected, this is the default case. - But if there are two NOR flashes connected to the - bus, you should enable this property. - (Please check the board's schematic.) - - big-endian : That means the IP register is big endian - -Example: - -qspi0: quadspi@40044000 { - compatible = "fsl,vf610-qspi"; - reg = <0x40044000 0x1000>, <0x20000000 0x10000000>; - reg-names = "QuadSPI", "QuadSPI-memory"; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_QSPI0_EN>, - <&clks VF610_CLK_QSPI0>; - clock-names = "qspi_en", "qspi"; - - flash0: s25fl128s@0 { - .... - }; -}; - -Example showing the usage of two SPI NOR devices: - -&qspi2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi2>; - status = "okay"; - - flash0: n25q256a@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q256a", "jedec,spi-nor"; - spi-max-frequency = <29000000>; - reg = <0>; - }; - - flash1: n25q256a@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q256a", "jedec,spi-nor"; - spi-max-frequency = <29000000>; - reg = <1>; - }; -}; |