|author||Eugeniu Rosca <email@example.com>||2018-08-20 16:49:10 +0200|
|committer||Marc Kleine-Budde <firstname.lastname@example.org>||2018-11-09 17:20:08 +0100|
|parent||can: ucan: remove duplicated include from ucan.c (diff)|
dt-bindings: can: rcar_can: document r8a77965 support
Document the support for rcar_can on R8A77965 SoC devices. Add R8A77965 to the list of SoCs which require the "assigned-clocks" and "assigned-clock-rates" properties (thanks, Sergei). Signed-off-by: Eugeniu Rosca <email@example.com> Reviewed-by: Simon Horman <firstname.lastname@example.org> Reviewed-by: Kieran Bingham <email@example.com> Reviewed-by: Rob Herring <firstname.lastname@example.org> Signed-off-by: Marc Kleine-Budde <email@example.com>
Diffstat (limited to 'Documentation/devicetree/bindings/net/can/rcar_can.txt')
1 files changed, 5 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index cc4372842bf3..47fc68148f38 100644
@@ -14,6 +14,7 @@ Required properties:
"renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
"renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
"renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
+ "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC.
"renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
"renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
@@ -29,11 +30,10 @@ Required properties:
- pinctrl-0: pin control group to be used for this controller.
- pinctrl-names: must be "default".
-Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796"
-In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock
-and can be used by both CAN and CAN FD controller at the same time. It needs to
-be scaled to maximum frequency if any of these controllers use it. This is done
+Required properties for R8A7795, R8A7796 and R8A77965:
+For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
+be used by both CAN and CAN FD controller at the same time. It needs to be
+scaled to maximum frequency if any of these controllers use it. This is done
using the below properties:
- assigned-clocks: phandle of clkp2(CANFD) clock.