Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...

1 files changed, 2 insertions, 158 deletions

diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index d66a5292b9d3..f66bb7ecdb82 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -1,12 +1,6 @@
 Distributed Switch Architecture Device Tree Bindings
 ----------------------------------------------------
 
-Two bindings exist, one of which has been deprecated due to
-limitations.
-
-Current Binding
----------------
-
 Switches are true Linux devices and can be probed by any means. Once
 probed, they register to the DSA framework, passing a node
 pointer. This node is expected to fulfil the following binding, and
@@ -71,9 +65,8 @@ properties, described in binding documents:
 			  Documentation/devicetree/bindings/net/fixed-link.txt
 			  for details.
 
-- local-mac-address	: See
-			  Documentation/devicetree/bindings/net/ethernet.txt
-			  for details.
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
 
 Example
 
@@ -262,152 +255,3 @@ linked into one DSA cluster.
 		};
 	};
 };
-
-Deprecated Binding
-------------------
-
-The deprecated binding makes use of a platform device to represent the
-switches. The switches themselves are not Linux devices, and make use
-of an MDIO bus for management.
-
-Required properties:
-- compatible		: Should be "marvell,dsa"
-- #address-cells	: Must be 2, first cell is the address on the MDIO bus
-			  and second cell is the address in the switch tree.
-			  Second cell is used only when cascading/chaining.
-- #size-cells		: Must be 0
-- dsa,ethernet		: Should be a phandle to a valid Ethernet device node
-- dsa,mii-bus		: Should be a phandle to a valid MDIO bus device node
-
-Optional properties:
-- interrupts		: property with a value describing the switch
-			  interrupt number (not supported by the driver)
-
-A DSA node can contain multiple switch chips which are therefore child nodes of
-the parent DSA node. The maximum number of allowed child nodes is 4
-(DSA_MAX_SWITCHES).
-Each of these switch child nodes should have the following required properties:
-
-- reg			: Contains two fields. The first one describes the
-			  address on the MII bus. The second is the switch
-			  number that must be unique in cascaded configurations
-- #address-cells	: Must be 1
-- #size-cells		: Must be 0
-
-A switch child node has the following optional property:
-
-- eeprom-length		: Set to the length of an EEPROM connected to the
-			  switch. Must be set if the switch can not detect
-			  the presence and/or size of a connected EEPROM,
-			  otherwise optional.
-
-A switch may have multiple "port" children nodes
-
-Each port children node must have the following mandatory properties:
-- reg			: Describes the port address in the switch
-- label			: Describes the label associated with this port, special
-			  labels are "cpu" to indicate a CPU port and "dsa" to
-			  indicate an uplink/downlink port.
-
-Note that a port labelled "dsa" will imply checking for the uplink phandle
-described below.
-
-Optional property:
-- link			: Should be a list of phandles to another switch's DSA port.
-			  This property is only used when switches are being
-			  chained/cascaded together. This port is used as outgoing port
-			  towards the phandle port, which can be more than one hop away.
-
-- phy-handle		: Phandle to a PHY on an external MDIO bus, not the
-			  switch internal one. See
-			  Documentation/devicetree/bindings/net/ethernet.txt
-			  for details.
-
-- phy-mode		: String representing the connection to the designated
-			  PHY node specified by the 'phy-handle' property. See
-			  Documentation/devicetree/bindings/net/ethernet.txt
-			  for details.
-
-- mii-bus		: Should be a phandle to a valid MDIO bus device node.
-			  This mii-bus will be used in preference to the
-			  global dsa,mii-bus defined above, for this switch.
-
-Optional subnodes:
-- fixed-link		: Fixed-link subnode describing a link to a non-MDIO
-			  managed entity. See
-			  Documentation/devicetree/bindings/net/fixed-link.txt
-			  for details.
-
-Example:
-
-	dsa@0 {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		interrupts = <10>;
-		dsa,ethernet = <&ethernet0>;
-		dsa,mii-bus = <&mii_bus0>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <16 0>;	/* MDIO address 16, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-				phy-handle = <&phy0>;
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-
-			switch0port6: port@6 {
-				reg = <6>;
-				label = "dsa";
-				link = <&switch1port0
-				        &switch2port0>;
-			};
-		};
-
-		switch@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <17 1>;	/* MDIO address 17, switch 1 in tree */
-			mii-bus = <&mii_bus1>;
-			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
-			switch1port0: port@0 {
-				reg = <0>;
-				label = "dsa";
-				link = <&switch0port6>;
-			};
-			switch1port1: port@1 {
-				reg = <1>;
-				label = "dsa";
-				link = <&switch2port1>;
-			};
-		};
-
-		switch@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <18 2>;	/* MDIO address 18, switch 2 in tree */
-			mii-bus = <&mii_bus1>;
-
-			switch2port0: port@0 {
-				reg = <0>;
-				label = "dsa";
-				link = <&switch1port1
-				        &switch0port6>;
-			};
-		};
-	};