Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...

6 files changed, 36 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/net/bluetooth.txt b/Documentation/devicetree/bindings/net/bluetooth.txt
new file mode 100644
index 000000000000..94797df751b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth.txt
@@ -0,0 +1,5 @@
+The following properties are common to the Bluetooth controllers:
+
+- local-bd-address: array of 6 bytes, specifies the BD address that was
+  uniquely assigned to the Bluetooth device, formatted with least significant
+  byte first (little-endian).
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 4448d063ddf6..464d6bf87605 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -52,7 +52,7 @@ I2C managed mode:
 
 			port@1 { /* external port 1 */
 				reg = <1>;
-				label = "lan1;
+				label = "lan1";
 			};
 
 			port@2 { /* external port 2 */
@@ -89,7 +89,7 @@ MDIO managed mode:
 
 					port@1 { /* external port 1 */
 						reg = <1>;
-						label = "lan1;
+						label = "lan1";
 					};
 
 					port@2 { /* external port 2 */
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 6f55bdd52f8a..f0dc94409107 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -34,6 +34,19 @@ Optional properties:
 - fsl,err006687-workaround-present: If present indicates that the system has
   the hardware workaround for ERR006687 applied and does not need a software
   workaround.
+ -interrupt-names:  names of the interrupts listed in interrupts property in
+  the same order. The defaults if not specified are
+  __Number of interrupts__   __Default__
+	1			"int0"
+	2			"int0", "pps"
+	3			"int0", "int1", "int2"
+	4			"int0", "int1", "int2", "pps"
+  The order may be changed as long as they correspond to the interrupts
+  property. Currently, only i.mx7 uses "int1" and "int2". They correspond to
+  tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts.
+  For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse
+  per second interrupt associated with 1588 precision time protocol(PTP).
+
 
 Optional subnodes:
 - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index 16723535e1aa..c902261893b9 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -17,6 +17,8 @@ Required properties:
 
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
+      - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
+      - "renesas,etheravb-r8a77995" for the R8A77995 SoC.
       - "renesas,etheravb-rcar-gen3" as a fallback for the above
 		R-Car Gen3 devices.
 
@@ -40,7 +42,7 @@ Optional properties:
 - interrupt-parent: the phandle for the interrupt controller that services
 		    interrupts for this device.
 - interrupt-names: A list of interrupt names.
-		   For the R8A779[56] SoCs this property is mandatory;
+		   For the R-Car Gen 3 SoCs this property is mandatory;
 		   it should include one entry per channel, named "ch%u",
 		   where %u is the channel number ranging from 0 to 24.
 		   For other SoCs this property is optional; if present
diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt
index 0115c85a2425..5172799a7f1a 100644
--- a/Documentation/devicetree/bindings/net/sh_eth.txt
+++ b/Documentation/devicetree/bindings/net/sh_eth.txt
@@ -4,7 +4,8 @@ This file provides information on what the device node for the SH EtherMAC
 interface contains.
 
 Required properties:
-- compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC.
+- compatible: Must contain one or more of the following:
+	      "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC.
 	      "renesas,ether-r8a7743"  if the device is a part of R8A7743 SoC.
 	      "renesas,ether-r8a7745"  if the device is a part of R8A7745 SoC.
 	      "renesas,ether-r8a7778"  if the device is a part of R8A7778 SoC.
@@ -14,6 +15,14 @@ Required properties:
 	      "renesas,ether-r8a7793"  if the device is a part of R8A7793 SoC.
 	      "renesas,ether-r8a7794"  if the device is a part of R8A7794 SoC.
 	      "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
+	      "renesas,rcar-gen1-ether" for a generic R-Car Gen1 device.
+	      "renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1
+	                                device.
+
+	      When compatible with the generic version, nodes must list
+	      the SoC-specific version corresponding to the platform
+	      first followed by the generic version.
+
 - reg: offset and length of (1) the E-DMAC/feLic register block (required),
        (2) the TSU register block (optional).
 - interrupts: interrupt specifier for the sole interrupt.
@@ -36,7 +45,8 @@ Optional properties:
 Example (Lager board):
 
 	ethernet@ee700000 {
-		compatible = "renesas,ether-r8a7790";
+		compatible = "renesas,ether-r8a7790",
+		             "renesas,rcar-gen2-ether";
 		reg = <0 0xee700000 0 0x400>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index c3a7be6615c5..3a28a5d8857d 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -12,7 +12,7 @@ Required properties:
 	Valid interrupt names are:
   - "macirq" (combined signal for various interrupt events)
   - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection)
-  - "eth_lpi" (the interrupt that occurs when Tx or Rx enters/exits LPI state)
+  - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state)
 - phy-mode: See ethernet.txt file in the same directory.
 - snps,reset-gpio 	gpio number for phy reset.
 - snps,reset-active-low boolean flag to indicate if phy reset is active low.