Merge branch 'kbuild/rc-fixes' into kbuild/kconfig

There is one kconfig fix in the rc-fixes branch that I forgot to submit
for 3.8, so let's add it to the kconfig branch for 3.9-rc1.

6 files changed, 130 insertions, 36 deletions

diff --git a/Documentation/devicetree/bindings/net/can/grcan.txt b/Documentation/devicetree/bindings/net/can/grcan.txt
new file mode 100644
index 000000000000..34ef3498f887
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/grcan.txt
@@ -0,0 +1,28 @@
+Aeroflex Gaisler GRCAN and GRHCAN CAN controllers.
+
+The GRCAN and CRHCAN CAN controllers are available in the GRLIB VHDL IP core
+library.
+
+Note: These properties are built from the AMBA plug&play in a Leon SPARC system
+(the ordinary environment for GRCAN and GRHCAN). There are no dts files for
+sparc.
+
+Required properties:
+
+- name : Should be "GAISLER_GRCAN", "01_03d", "GAISLER_GRHCAN" or "01_034"
+
+- reg : Address and length of the register set for the device
+
+- freq : Frequency of the external oscillator clock in Hz (the frequency of
+	the amba bus in the ordinary case)
+
+- interrupts : Interrupt number for this device
+
+Optional properties:
+
+- systemid : If not present or if the value of the least significant 16 bits
+	of this 32-bit property is smaller than GRCAN_TXBUG_SAFE_GRLIB_VERSION
+	a bug workaround is activated.
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt
new file mode 100644
index 000000000000..09055c2495f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cdns-emac.txt
@@ -0,0 +1,23 @@
+* Cadence EMAC Ethernet controller
+
+Required properties:
+- compatible: Should be "cdns,[<chip>-]{emac}"
+  Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
+  or the generic form: "cdns,emac".
+- reg: Address and length of the register set for the device
+- interrupts: Should contain macb interrupt
+- phy-mode: String, operation mode of the PHY interface.
+  Supported values are: "mii", "rmii".
+
+Optional properties:
+- local-mac-address: 6 bytes, mac address
+
+Examples:
+
+	macb0: ethernet@fffc4000 {
+		compatible = "cdns,at91rm9200-emac";
+		reg = <0xfffc4000 0x4000>;
+		interrupts = <21>;
+		phy-mode = "rmii";
+		local-mac-address = [3a 0e 03 04 05 06];
+	};
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index dcaabe9fe869..6ddd0286a9b7 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -9,21 +9,15 @@ Required properties:
 			  number
 - interrupt-parent	: The parent interrupt controller
 - cpdma_channels 	: Specifies number of channels in CPDMA
-- host_port_no		: Specifies host port shift
-- cpdma_reg_ofs		: Specifies CPDMA submodule register offset
-- cpdma_sram_ofs	: Specifies CPDMA SRAM offset
-- ale_reg_ofs		: Specifies ALE submodule register offset
 - ale_entries		: Specifies No of entries ALE can hold
-- host_port_reg_ofs	: Specifies host port register offset
-- hw_stats_reg_ofs	: Specifies hardware statistics register offset
-- bd_ram_ofs		: Specifies internal desciptor RAM offset
 - bd_ram_size		: Specifies internal descriptor RAM size
 - rx_descs		: Specifies number of Rx descriptors
 - mac_control		: Specifies Default MAC control register content
 			  for the specific platform
 - slaves		: Specifies number for slaves
-- slave_reg_ofs		: Specifies slave register offset
-- sliver_reg_ofs	: Specifies slave sliver register offset
+- cpts_active_slave	: Specifies the slave to use for time stamping
+- cpts_clock_mult	: Numerator to convert input clock ticks into nanoseconds
+- cpts_clock_shift	: Denominator to convert input clock ticks into nanoseconds
 - phy_id		: Specifies slave phy id
 - mac-address		: Specifies slave MAC address
 
@@ -45,30 +39,22 @@ Examples:
 		interrupts = <55 0x4>;
 		interrupt-parent = <&intc>;
 		cpdma_channels = <8>;
-		host_port_no = <0>;
-		cpdma_reg_ofs = <0x800>;
-		cpdma_sram_ofs = <0xa00>;
-		ale_reg_ofs = <0xd00>;
 		ale_entries = <1024>;
-		host_port_reg_ofs = <0x108>;
-		hw_stats_reg_ofs = <0x900>;
-		bd_ram_ofs = <0x2000>;
 		bd_ram_size = <0x2000>;
 		no_bd_ram = <0>;
 		rx_descs = <64>;
 		mac_control = <0x20>;
 		slaves = <2>;
+		cpts_active_slave = <0>;
+		cpts_clock_mult = <0x80000000>;
+		cpts_clock_shift = <29>;
 		cpsw_emac0: slave@0 {
-			slave_reg_ofs = <0x208>;
-			sliver_reg_ofs = <0xd80>;
-			phy_id = "davinci_mdio.16:00";
+			phy_id = <&davinci_mdio>, <0>;
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 		cpsw_emac1: slave@1 {
-			slave_reg_ofs = <0x308>;
-			sliver_reg_ofs = <0xdc0>;
-			phy_id = "davinci_mdio.16:01";
+			phy_id = <&davinci_mdio>, <1>;
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
@@ -79,30 +65,22 @@ Examples:
 		compatible = "ti,cpsw";
 		ti,hwmods = "cpgmac0";
 		cpdma_channels = <8>;
-		host_port_no = <0>;
-		cpdma_reg_ofs = <0x800>;
-		cpdma_sram_ofs = <0xa00>;
-		ale_reg_ofs = <0xd00>;
 		ale_entries = <1024>;
-		host_port_reg_ofs = <0x108>;
-		hw_stats_reg_ofs = <0x900>;
-		bd_ram_ofs = <0x2000>;
 		bd_ram_size = <0x2000>;
 		no_bd_ram = <0>;
 		rx_descs = <64>;
 		mac_control = <0x20>;
 		slaves = <2>;
+		cpts_active_slave = <0>;
+		cpts_clock_mult = <0x80000000>;
+		cpts_clock_shift = <29>;
 		cpsw_emac0: slave@0 {
-			slave_reg_ofs = <0x208>;
-			sliver_reg_ofs = <0xd80>;
-			phy_id = "davinci_mdio.16:00";
+			phy_id = <&davinci_mdio>, <0>;
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 		cpsw_emac1: slave@1 {
-			slave_reg_ofs = <0x308>;
-			sliver_reg_ofs = <0xdc0>;
-			phy_id = "davinci_mdio.16:01";
+			phy_id = <&davinci_mdio>, <1>;
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
new file mode 100644
index 000000000000..859a6fa7569c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -0,0 +1,23 @@
+* Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
+
+Required properties:
+- compatible: should be "marvell,armada-370-neta".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device
+- phy: A phandle to a phy node defining the PHY address (as the reg
+  property, a single integer).
+- phy-mode: The interface between the SoC and the PHY (a string that
+  of_get_phy_mode() can understand)
+- clocks: a pointer to the reference clock for this device.
+
+Example:
+
+ethernet@d0070000 {
+	compatible = "marvell,armada-370-neta";
+	reg = <0xd0070000 0x2500>;
+	interrupts = <8>;
+	clocks = <&gate_clk 4>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
new file mode 100644
index 000000000000..34e7aafa321c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
@@ -0,0 +1,35 @@
+* Marvell MDIO Ethernet Controller interface
+
+The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
+MV78xx0, Armada 370 and Armada XP have an identical unit that provides
+an interface with the MDIO bus. This driver handles this MDIO
+interface.
+
+Required properties:
+- compatible: "marvell,orion-mdio"
+- reg: address and length of the SMI register
+
+The child nodes of the MDIO driver are the individual PHY devices
+connected to this MDIO bus. They must have a "reg" property given the
+PHY address on the MDIO bus.
+
+Example at the SoC level:
+
+mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "marvell,orion-mdio";
+	reg = <0xd0072004 0x4>;
+};
+
+And at the board level:
+
+mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+}
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt
index bc9549529014..c79bab025369 100644
--- a/Documentation/devicetree/bindings/net/mdio-gpio.txt
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.txt
@@ -8,9 +8,16 @@ gpios property as described in section VIII.1 in the following order:
 
 MDC, MDIO.
 
+Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+node.
+
 Example:
 
-mdio {
+aliases {
+	mdio-gpio0 = <&mdio0>;
+};
+
+mdio0: mdio {
 	compatible = "virtual,mdio-gpio";
 	#address-cells = <1>;
 	#size-cells = <0>;