Merge branch 'lorenzo/pci/tegra'

  - Fix Tegra OF node reference leak (Nishka Dasgupta)

  - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s
    features (Vidya Sagar)

  - Disable MSI for Tegra Root Ports since they don't support using MSI for
    all Root Port events (Vidya Sagar)

  - Group DesignWare write-protected register writes together (Vidya Sagar)

  - Move DesignWare capability search interfaces so they can be used by
    both host and endpoint drivers (Vidya Sagar)

  - Add DesignWare extended capability search interfaces (Vidya Sagar)

  - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar)

  - Add "snps,enable-cdm-check" DT binding for Configuration Dependent
    Module (CDM) register checking (Vidya Sagar)

  - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya
    Sagar)

  - Add "supports-clkreq" DT binding for host drivers to decide whether to
    advertise low power features (Vidya Sagar)

  - Add DT binding for Tegra194 (Vidya Sagar)

  - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar)

  - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar)

  - Add support for Tegra194 host controller (Vidya Sagar)

  - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar)

  - Add Tegra support for slot regulators for p2972-0000 platform (Vidya
    Sagar)

* lorenzo/pci/tegra:
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  phy: tegra: Add PCIe PIPE2UPHY support
  dt-bindings: PHY: P2U: Add Tegra194 P2U block
  dt-bindings: PCI: tegra: Add device tree support for Tegra194
  dt-bindings: Add PCIe supports-clkreq property
  PCI: dwc: Add support to enable CDM register check
  dt-bindings: PCI: designware: Add binding for CDM register check
  PCI: dwc: Export dw_pcie_wait_for_link() API
  PCI: dwc: Add extended configuration space capability search API
  PCI: dwc: Move config space capability search API
  PCI: dwc: Group DBI registers writes requiring unlocking
  PCI: Disable MSI for Tegra root ports
  PCI: Add #defines for some of PCIe spec r4.0 features
  PCI: tegra: Fix OF node reference leak

1 files changed, 5 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index bd880df39a79..78494c4050f7 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -33,6 +33,11 @@ Optional properties:
 - clock-names: Must include the following entries:
 	- "pcie"
 	- "pcie_bus"
+- snps,enable-cdm-check: This is a boolean property and if present enables
+   automatic checking of CDM (Configuration Dependent Module) registers
+   for data corruption. CDM registers include standard PCIe configuration
+   space registers, Port Logic registers, DMA and iATU (internal Address
+   Translation Unit) registers.
 RC mode:
 - num-viewport: number of view ports configured in hardware. If a platform
   does not specify it, the driver assumes 2.