Merge tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 5.6

*) Add support in PHY core to create link between PHY consumer and PHY
   provider
*) Add DisplayPort PHY configuration set to be used for negotiating the
   configurations to be used between DisplayPort controller and
   DisplayPort PHY
*) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
   TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
   J721E SoC (Supports USB and PCIe)
*) Add PHY driver for eMMC PHY in Intel LGM SoC
*) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
   Synopsys USB Controller
*) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
*) Fix lost packet issue, fix MDIO from getting inaccessible, fix
   occasional transaction failures, fix USB driver from crashing in
   Broadcom USB PHY driver
*) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
*) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
   display controller to rockchip-inno-dsidphy
*) Other cleanups including compile testing for some of the PHY drivers,
   fixing Kconfig indentation, duplicate writes in drivers etc.,

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (54 commits)
  dt-bindings: phy: Add PHY_TYPE_DP definition
  phy: ti: j721e-wiz: Fix return value check in wiz_probe()
  dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema
  phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE
  phy: ti: j721e-wiz: Manage typec-gpio-dir
  dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
  phy: cadence: Sierra: add phy_reset hook
  phy: cadence: Sierra: remove redundant initialization of pointer regmap
  phy: Add DisplayPort configuration options
  phy: Enable compile testing for some of drivers
  phy: mediatek: Fix Kconfig indentation
  phy: intel-lgm-emmc: Add support for eMMC PHY
  dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY
  phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
  dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
  phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove()
  phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz
  phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
  phy: cadence: Sierra: Check for PLL lock during PHY power on
  phy: cadence: Sierra: Get reset control "array" for each link
  ...

8 files changed, 477 insertions, 60 deletions

diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
new file mode 100644
index 000000000000..ded7d6f0a119
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    anyOf:
+      - description: Main PHY Clock
+
+      - items:
+          - description: Main PHY clock
+          - description: HSIC 12MHz clock
+          - description: HSIC 480MHz clock
+
+  clock-names:
+    oneOf:
+      - const: phy
+
+      - items:
+          - const: phy
+          - const: hsic_12M
+          - const: hsic_480M
+
+  resets:
+    anyOf:
+      - description: Normal USB PHY reset
+
+      - items:
+          - description: Normal USB PHY reset
+          - description: HSIC Reset
+
+  reset-names:
+    oneOf:
+      - const: phy
+
+      - items:
+          - const: phy
+          - const: hsic
+
+  phy_type:
+    const: hsic
+    description:
+      When absent, the PHY type will be assumed to be normal USB.
+
+  phy-supply:
+    description:
+      Regulator that powers VBUS
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+if:
+  properties:
+    phy_type:
+      const: hsic
+
+  required:
+    - phy_type
+
+then:
+  properties:
+    clocks:
+      maxItems: 3
+
+    clock-names:
+      maxItems: 3
+
+    resets:
+      maxItems: 2
+
+    reset-names:
+      maxItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-usb.h>
+    #include <dt-bindings/reset/sun9i-a80-usb.h>
+
+    usbphy1: phy@a00800 {
+        compatible = "allwinner,sun9i-a80-usb-phy";
+        reg = <0x00a00800 0x4>;
+        clocks = <&usb_clocks CLK_USB0_PHY>;
+        clock-names = "phy";
+        resets = <&usb_clocks RST_USB0_PHY>;
+        reset-names = "phy";
+        phy-supply = <&reg_usb1_vbus>;
+        #phy-cells = <0>;
+    };
+
+  - |
+    #include <dt-bindings/clock/sun9i-a80-usb.h>
+    #include <dt-bindings/reset/sun9i-a80-usb.h>
+
+    usbphy3: phy@a02800 {
+        compatible = "allwinner,sun9i-a80-usb-phy";
+        reg = <0x00a02800 0x4>;
+        clocks = <&usb_clocks CLK_USB2_PHY>,
+                 <&usb_clocks CLK_USB_HSIC>,
+                 <&usb_clocks CLK_USB2_HSIC>;
+        clock-names = "phy",
+                      "hsic_12M",
+                      "hsic_480M";
+        resets = <&usb_clocks RST_USB2_PHY>,
+                 <&usb_clocks RST_USB2_HSIC>;
+        reset-names = "phy",
+                      "hsic";
+        phy_type = "hsic";
+        phy-supply = <&reg_usb3_vbus>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
index 24a0d06acd1d..698aacbdcfc4 100644
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
@@ -1,30 +1,49 @@
 Broadcom STB USB PHY
 
 Required properties:
- - compatible: brcm,brcmstb-usb-phy
- - reg: two offset and length pairs.
-	The first pair specifies a manditory set of memory mapped
-	registers used for general control of the PHY.
-	The second pair specifies optional registers used by some of
-	the SoCs that support USB 3.x
- - #phy-cells: Shall be 1 as it expects one argument for setting
-	       the type of the PHY. Possible values are:
-	       - PHY_TYPE_USB2 for USB1.1/2.0 PHY
-	       - PHY_TYPE_USB3 for USB3.x PHY
+- compatible: should be one of
+	"brcm,brcmstb-usb-phy"
+	"brcm,bcm7216-usb-phy"
+	"brcm,bcm7211-usb-phy"
+
+- reg and reg-names properties requirements are specific to the
+  compatible string.
+  "brcm,brcmstb-usb-phy":
+    - reg: 1 or 2 offset and length pairs. One for the base CTRL registers
+           and an optional pair for systems with USB 3.x support
+    - reg-names: not specified
+  "brcm,bcm7216-usb-phy":
+    - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
+           registers
+    - reg-names: "ctrl", "xhci_ec", "xhci_gbl"
+  "brcm,bcm7211-usb-phy":
+    - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
+           USB_PHY and USB_MDIO registers and an optional pair
+	   for the BDC registers
+    - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
+
+- #phy-cells: Shall be 1 as it expects one argument for setting
+	      the type of the PHY. Possible values are:
+	      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
+	      - PHY_TYPE_USB3 for USB3.x PHY
 
 Optional Properties:
 - clocks : clock phandles.
 - clock-names: String, clock name.
+- interrupts: wakeup interrupt
+- interrupt-names: "wakeup"
 - brcm,ipp: Boolean, Invert Port Power.
   Possible values are: 0 (Don't invert), 1 (Invert)
 - brcm,ioc: Boolean, Invert Over Current detection.
   Possible values are: 0 (Don't invert), 1 (Invert)
-NOTE: one or both of the following two properties must be set
-- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
-- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
 - dr_mode: String, PHY Device mode.
   Possible values are: "host", "peripheral ", "drd" or "typec-pd"
   If this property is not defined, the phy will default to "host" mode.
+- brcm,syscon-piarbctl: phandle to syscon for handling config registers
+NOTE: one or both of the following two properties must be set
+- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
+- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
+
 
 Example:
 
@@ -41,3 +60,27 @@ usbphy_0: usb-phy@f0470200 {
 	clocks = <&usb20>, <&usb30>;
 	clock-names = "sw_usb", "sw_usb3";
 };
+
+usb-phy@29f0200 {
+	reg = <0x29f0200 0x200>,
+		<0x29c0880 0x30>,
+		<0x29cc100 0x534>,
+		<0x2808000 0x24>,
+		<0x2980080 0x8>;
+	reg-names = "ctrl",
+		"xhci_ec",
+		"xhci_gbl",
+		"usb_phy",
+		"usb_mdio";
+	brcm,ioc = <0x0>;
+	brcm,ipp = <0x0>;
+	compatible = "brcm,bcm7211-usb-phy";
+	interrupts = <0x30>;
+	interrupt-parent = <&vpu_intr1_nosec_intc>;
+	interrupt-names = "wake";
+	#phy-cells = <0x1>;
+	brcm,has-xhci;
+	syscon-piarbctl = <&syscon_piarbctl>;
+	clocks = <&scmi_clk 256>;
+	clock-names = "sw_usb";
+};
diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
index b640845fec67..c03ad2198410 100644
--- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible: should be one or more of
+     "brcm,bcm7216-sata-phy"
      "brcm,bcm7425-sata-phy"
      "brcm,bcm7445-sata-phy"
      "brcm,iproc-ns2-sata-phy"
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
new file mode 100644
index 000000000000..ff7959c21af0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+description: |+
+  Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon
+  node is used to reference the base address of eMMC phy registers.
+
+  The eMMC PHY node should be the child of a syscon node with the
+  required property:
+
+  - compatible:         Should be one of the following:
+                        "intel,lgm-syscon", "syscon"
+  - reg:
+      maxItems: 1
+
+properties:
+  compatible:
+      const: intel,lgm-emmc-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+
+examples:
+  - |
+    sysconf: chiptop@e0200000 {
+      compatible = "intel,lgm-syscon", "syscon";
+      reg = <0xe0200000 0x100>;
+
+      emmc-phy: emmc-phy@a8 {
+        compatible = "intel,lgm-emmc-phy";
+        reg = <0x00a8 0x10>;
+        clocks = <&emmc>;
+        #phy-cells = <0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
index 6e1b47bfce43..03f5939d3d19 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
@@ -2,21 +2,24 @@ Cadence Sierra PHY
 -----------------------
 
 Required properties:
-- compatible:	cdns,sierra-phy-t0
-- clocks:	Must contain an entry in clock-names.
-		See ../clocks/clock-bindings.txt for details.
-- clock-names:	Must be "phy_clk"
+- compatible:	Must be "cdns,sierra-phy-t0" for Sierra in Cadence platform
+		Must be "ti,sierra-phy-t0" for Sierra in TI's J721E SoC.
 - resets:	Must contain an entry for each in reset-names.
 		See ../reset/reset.txt for details.
 - reset-names:	Must include "sierra_reset" and "sierra_apb".
 		"sierra_reset" must control the reset line to the PHY.
 		"sierra_apb" must control the reset line to the APB PHY
-		interface.
+		interface ("sierra_apb" is optional).
 - reg:		register range for the PHY.
 - #address-cells: Must be 1
 - #size-cells:	Must be 0
 
 Optional properties:
+- clocks:		Must contain an entry in clock-names.
+			See ../clocks/clock-bindings.txt for details.
+- clock-names:		Must contain "cmn_refclk_dig_div" and
+			"cmn_refclk1_dig_div" for configuring the frequency of
+			the clock to the lanes. "phy_clk" is deprecated.
 - cdns,autoconf:	A boolean property whose presence indicates that the
 			PHY registers will be configured by hardware. If not
 			present, all sub-node optional properties must be
diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
index bb0da87bcd84..476c56a1dc8c 100644
--- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
@@ -13,9 +13,6 @@ properties:
   "#phy-cells":
     const: 0
 
-  "#clock-cells":
-    const: 0
-
   compatible:
     enum:
       - rockchip,px30-dsi-dphy
@@ -49,7 +46,6 @@ properties:
 
 required:
   - "#phy-cells"
-  - "#clock-cells"
   - compatible
   - reg
   - clocks
@@ -66,7 +62,6 @@ examples:
         reg = <0x0 0xff2e0000 0x0 0x10000>;
         clocks = <&pmucru 13>, <&cru 12>;
         clock-names = "ref", "pclk";
-        #clock-cells = <0>;
         resets = <&cru 12>;
         reset-names = "apb";
         #phy-cells = <0>;
diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
deleted file mode 100644
index 64f7109aea1f..000000000000
--- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Allwinner sun9i USB PHY
------------------------
-
-Required properties:
-- compatible : should be one of
-  * allwinner,sun9i-a80-usb-phy
-- reg : a list of offset + length pairs
-- #phy-cells : from the generic phy bindings, must be 0
-- phy_type : "hsic" for HSIC usage;
-	     other values or absence of this property indicates normal USB
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names : depending on the "phy_type" property,
-  * "phy" for normal USB
-  * "hsic_480M", "hsic_12M" for HSIC
-- resets : a list of phandle + reset specifier pairs
-- reset-names : depending on the "phy_type" property,
-  * "phy" for normal USB
-  * "hsic" for HSIC
-
-Optional Properties:
-- phy-supply : from the generic phy bindings, a phandle to a regulator that
-	       provides power to VBUS.
-
-It is recommended to list all clocks and resets available.
-The driver will only use those matching the phy_type.
-
-Example:
-	usbphy1: phy@a01800 {
-		compatible = "allwinner,sun9i-a80-usb-phy";
-		reg = <0x00a01800 0x4>;
-		clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
-		       <&usb_phy_clk 3>;
-		clock-names = "hsic_480M", "hsic_12M", "phy";
-		resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
-		reset-names = "hsic", "phy";
-		#phy-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
new file mode 100644
index 000000000000..452cee1aed32
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -0,0 +1,221 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E WIZ (SERDES Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-wiz-16g
+      - ti,j721e-wiz-10g
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: clock-specifier to represent input to the WIZ
+
+  clock-names:
+    items:
+      - const: fck
+      - const: core_ref_clk
+      - const: ext_ref_clk
+
+  num-lanes:
+    minimum: 1
+    maximum: 4
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  ranges: true
+
+  assigned-clocks:
+    maxItems: 2
+
+  assigned-clock-parents:
+    maxItems: 2
+
+  typec-dir-gpios:
+    maxItems: 1
+    description:
+      GPIO to signal Type-C cable orientation for lane swap.
+      If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to
+      achieve the funtionality of an external type-C plug flip mux.
+
+  typec-dir-debounce-ms:
+    minimum: 100
+    maximum: 1000
+    default: 100
+    description:
+      Number of milliseconds to wait before sampling typec-dir-gpio.
+      If not specified, the default debounce of 100ms will be used.
+      Type-C spec states minimum CC pin debounce of 100 ms and maximum
+      of 200 ms. However, some solutions might need more than 200 ms.
+
+patternProperties:
+  "^pll[0|1]-refclk$":
+    type: object
+    description: |
+      WIZ node should have subnodes for each of the PLLs present in
+      the SERDES.
+    properties:
+      clocks:
+        maxItems: 2
+        description: Phandle to clock nodes representing the two inputs to PLL.
+
+      "#clock-cells":
+        const: 0
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
+  "^cmn-refclk1?-dig-div$":
+    type: object
+    description:
+      WIZ node should have subnodes for each of the PMA common refclock
+      provided by the SERDES.
+    properties:
+      clocks:
+        maxItems: 1
+        description: Phandle to the clock node representing the input to the
+          divider clock.
+
+      "#clock-cells":
+        const: 0
+
+    required:
+      - clocks
+      - "#clock-cells"
+
+  "^refclk-dig$":
+    type: object
+    description: |
+      WIZ node should have subnode for refclk_dig to select the reference
+      clock source for the reference clock used in the PHY and PMA digital
+      logic.
+    properties:
+      clocks:
+        maxItems: 4
+        description: Phandle to four clock nodes representing the inputs to
+          refclk_dig
+
+      "#clock-cells":
+        const: 0
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
+  "^serdes@[0-9a-f]+$":
+    type: object
+    description: |
+      WIZ node should have '1' subnode for the SERDES. It could be either
+      Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the
+      bindings specified in
+      Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+      Torrent SERDES should follow the bindings specified in
+      Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+
+required:
+  - compatible
+  - power-domains
+  - clocks
+  - clock-names
+  - num-lanes
+  - "#address-cells"
+  - "#size-cells"
+  - "#reset-cells"
+  - ranges
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    wiz@5000000 {
+           compatible = "ti,j721e-wiz-16g";
+           #address-cells = <1>;
+           #size-cells = <1>;
+           power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+           clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+           clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+           assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+           assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+           num-lanes = <2>;
+           #reset-cells = <1>;
+           ranges = <0x5000000 0x5000000 0x10000>;
+
+           pll0-refclk {
+                  clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz1_pll0_refclk>;
+                  assigned-clock-parents = <&k3_clks 293 13>;
+           };
+
+           pll1-refclk {
+                  clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz1_pll1_refclk>;
+                  assigned-clock-parents = <&k3_clks 293 0>;
+           };
+
+           cmn-refclk-dig-div {
+                  clocks = <&wiz1_refclk_dig>;
+                  #clock-cells = <0>;
+           };
+
+           cmn-refclk1-dig-div {
+                  clocks = <&wiz1_pll1_refclk>;
+                  #clock-cells = <0>;
+           };
+
+           refclk-dig {
+                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz0_refclk_dig>;
+                  assigned-clock-parents = <&k3_clks 292 11>;
+           };
+
+           serdes@5000000 {
+                  compatible = "cdns,ti,sierra-phy-t0";
+                  reg-names = "serdes";
+                  reg = <0x5000000 0x10000>;
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  resets = <&serdes_wiz0 0>;
+                  reset-names = "sierra_reset";
+                  clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
+                  clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+           };
+    };