diff options
| author |   Baolin Wang <baolin.wang@spreadtrum.com> | 2017-08-17 14:50:36 +0800 |
|---|---|---|
| committer |   Linus Walleij <linus.walleij@linaro.org> | 2017-08-31 09:15:21 +0200 |
| commit | 6606bc9dee63ad8cda2cc310d2ad5992673a785a (patch) | |
| tree | ee19f111f9e01e5699cb8681f8f117d81c4e07a2 /Documentation/devicetree/bindings/pinctrl | |
| parent | pinctrl: mediatek: update PCIe mux data for MT7623 (diff) | |
| download | linux-dev-6606bc9dee63ad8cda2cc310d2ad5992673a785a.tar.xz linux-dev-6606bc9dee63ad8cda2cc310d2ad5992673a785a.zip | |
pinctrl: Add sleep related state to indicate sleep related configs
In some scenarios, we should set some pins as input/output/pullup/pulldown
when the specified system goes into deep sleep mode, then when the system
goes into deep sleep mode, these pins will be set automatically by hardware.
That means some pins are not controlled by any specific driver in the OS, but
need to be controlled when entering sleep mode. Thus we introduce one sleep
state config into pinconf-generic for users to configure.
Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 62d0f33fa65e..4483cc31e531 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -268,6 +268,8 @@ output-enable - enable output on a pin without actively driving it (such as enabling an output buffer) output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level +sleep-hardware-state - indicate this is sleep related state which will be programmed + into the registers for the sleep state. slew-rate - set the slew rate For example: |