Merge tag 'rproc-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This adds support to the remoteproc core for detaching Linux from a
  running remoteproc, e.g. to reboot Linux while leaving the remoteproc
  running, and it enable this support in the stm32 remoteproc driver.

  It also introduces a property for memory carveouts to track if they
  are iomem or system ram, to enable proper handling of the differences.

  The imx_rproc received a number of fixes and improvements, in
  particular support for attaching to already running remote processors
  and i.MX8MQ and i.MX8MM support.

  The Qualcomm wcss driver gained support for starting and stopping the
  wireless subsystem on QCS404, when not using the TrustZone-based
  validator/loader.

  Finally it brings a few fixes to the TI PRU and to the firmware loader
  for the Qualcomm modem subsystem drivers"

* tag 'rproc-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (53 commits)
  remoteproc: stm32: add capability to detach
  dt-bindings: remoteproc: stm32-rproc: add new mailbox channel for detach
  remoteproc: imx_rproc: support remote cores booted before Linux Kernel
  remoteproc: imx_rproc: move memory parsing to rproc_ops
  remoteproc: imx_rproc: enlarge IMX7D_RPROC_MEM_MAX
  remoteproc: imx_rproc: add missing of_node_put
  remoteproc: imx_rproc: fix build error without CONFIG_MAILBOX
  remoteproc: qcom: wcss: Remove unnecessary PTR_ERR()
  remoteproc: qcom: wcss: Fix wrong pointer passed to PTR_ERR()
  remoteproc: qcom: pas: Add modem support for SDX55
  dt-bindings: remoteproc: qcom: pas: Add binding for SDX55
  remoteproc: qcom: wcss: Fix return value check in q6v5_wcss_init_mmio()
  remoteproc: pru: Fix and cleanup firmware interrupt mapping logic
  remoteproc: pru: Fix wrong success return value for fw events
  remoteproc: pru: Fixup interrupt-parent logic for fw events
  remoteproc: qcom: wcnss: Allow specifying firmware-name
  remoteproc: qcom: wcss: explicitly request exclusive reset control
  remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404
  dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for QCS404
  remoteproc: qcom: wcss: populate hardcoded param using driver data
  ...

1 files changed, 15 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 7ccd5534b0ae..69c49c7b2cff 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -9,6 +9,7 @@ on the Qualcomm Hexagon core.
 	Definition: must be one of:
 		    "qcom,q6v5-pil",
 		    "qcom,ipq8074-wcss-pil"
+		    "qcom,qcs404-wcss-pil"
 		    "qcom,msm8916-mss-pil",
 		    "qcom,msm8974-mss-pil"
 		    "qcom,msm8996-mss-pil"
@@ -39,6 +40,7 @@ on the Qualcomm Hexagon core.
 		    string:
 	qcom,q6v5-pil:
 	qcom,ipq8074-wcss-pil:
+	qcom,qcs404-wcss-pil:
 	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
@@ -67,6 +69,11 @@ on the Qualcomm Hexagon core.
 	Definition: The clocks needed depend on the compatible string:
 	qcom,ipq8074-wcss-pil:
 		    no clock names required
+	qcom,qcs404-wcss-pil:
+		    must be "xo", "gcc_abhs_cbcr", "gcc_abhs_cbcr",
+		    "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc",
+		    "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc",
+		    "lcc_axim_cbc", "lcc_bcr_sleep"
 	qcom,q6v5-pil:
 	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
@@ -133,6 +140,14 @@ For the compatible string below the following supplies are required:
 		    booting of the Hexagon core
 
 For the compatible string below the following supplies are required:
+  "qcom,qcs404-wcss-pil"
+- cx-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the regulators to be held on behalf of the
+		    booting of the Hexagon core
+
+For the compatible string below the following supplies are required:
   "qcom,msm8996-mss-pil"
 - pll-supply:
 	Usage: required