Merge branch 'akpm' (patches from Andrew)

Merge fourth set of updates from Andrew Morton:

 - the rest of lib/

 - checkpatch updates

 - a few misc things

 - kasan: kernel address sanitizer

 - the rtc tree

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits)
  ARM: mvebu: enable Armada 38x RTC driver in mvebu_v7_defconfig
  ARM: mvebu: add Device Tree description of RTC on Armada 38x
  MAINTAINERS: add the RTC driver for the Armada38x
  drivers/rtc/rtc-armada38x: add a new RTC driver for recent mvebu SoCs
  rtc: armada38x: add the device tree binding documentation
  rtc: rtc-ab-b5ze-s3: add sub-minute alarm support
  rtc: add support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip
  of: add vendor prefix for Abracon Corporation
  drivers/rtc/rtc-rk808.c: fix rtc time reading issue
  drivers/rtc/rtc-isl12057.c: constify struct regmap_config
  drivers/rtc/rtc-at91sam9.c: constify struct regmap_config
  drivers/rtc/rtc-imxdi.c: add more known register bits
  drivers/rtc/rtc-imxdi.c: trivial clean up code
  ARM: mvebu: ISL12057 rtc chip can now wake up RN102, RN102 and RN2120
  rtc: rtc-isl12057: add isil,irq2-can-wakeup-machine property for in-tree users
  drivers/rtc/rtc-isl12057.c: add alarm support to Intersil ISL12057 RTC driver
  drivers/rtc/rtc-pcf2123.c: add support for devicetree
  kprobes: makes kprobes/enabled works correctly for optimized kprobes.
  kprobes: set kprobes_all_disarmed earlier to enable re-optimization.
  init: remove CONFIG_INIT_FALLBACK
  ...

1 files changed, 22 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
new file mode 100644
index 000000000000..2eb9d4ee7dc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
@@ -0,0 +1,22 @@
+* Real Time Clock of the Armada 38x SoCs
+
+RTC controller for the Armada 38x SoCs
+
+Required properties:
+- compatible : Should be "marvell,armada-380-rtc"
+- reg: a list of base address and size pairs, one for each entry in
+  reg-names
+- reg names: should contain:
+  * "rtc" for the RTC registers
+  * "rtc-soc" for the SoC related registers and among them the one
+    related to the interrupt.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc@a3800 {
+	compatible = "marvell,armada-380-rtc";
+	reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+	reg-names = "rtc", "rtc-soc";
+	interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+};