Merge branch 'akpm' (patches from Andrew)

Merge fourth set of updates from Andrew Morton:

 - the rest of lib/

 - checkpatch updates

 - a few misc things

 - kasan: kernel address sanitizer

 - the rtc tree

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits)
  ARM: mvebu: enable Armada 38x RTC driver in mvebu_v7_defconfig
  ARM: mvebu: add Device Tree description of RTC on Armada 38x
  MAINTAINERS: add the RTC driver for the Armada38x
  drivers/rtc/rtc-armada38x: add a new RTC driver for recent mvebu SoCs
  rtc: armada38x: add the device tree binding documentation
  rtc: rtc-ab-b5ze-s3: add sub-minute alarm support
  rtc: add support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip
  of: add vendor prefix for Abracon Corporation
  drivers/rtc/rtc-rk808.c: fix rtc time reading issue
  drivers/rtc/rtc-isl12057.c: constify struct regmap_config
  drivers/rtc/rtc-at91sam9.c: constify struct regmap_config
  drivers/rtc/rtc-imxdi.c: add more known register bits
  drivers/rtc/rtc-imxdi.c: trivial clean up code
  ARM: mvebu: ISL12057 rtc chip can now wake up RN102, RN102 and RN2120
  rtc: rtc-isl12057: add isil,irq2-can-wakeup-machine property for in-tree users
  drivers/rtc/rtc-isl12057.c: add alarm support to Intersil ISL12057 RTC driver
  drivers/rtc/rtc-pcf2123.c: add support for devicetree
  kprobes: makes kprobes/enabled works correctly for optimized kprobes.
  kprobes: set kprobes_all_disarmed earlier to enable re-optimization.
  init: remove CONFIG_INIT_FALLBACK
  ...

1 files changed, 78 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
new file mode 100644
index 000000000000..501c39ceae79
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
@@ -0,0 +1,78 @@
+Intersil ISL12057 I2C RTC/Alarm chip
+
+ISL12057 is a trivial I2C device (it has simple device tree bindings,
+consisting of a compatible field, an address and possibly an interrupt
+line).
+
+Nonetheless, it also supports an option boolean property
+("isil,irq2-can-wakeup-machine") to handle the specific use-case found
+on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104
+and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip
+(associated with the alarm supported by the driver) is not connected
+to the SoC but to a PMIC. It allows the device to be powered up when
+RTC alarm rings. In order to mark the device has a wakeup source and
+get access to the 'wakealarm' sysfs entry, this specific property can
+be set when the IRQ#2 pin of the chip is not connected to the SoC but
+can wake up the device.
+
+Required properties supported by the device:
+
+ - "compatible": must be "isil,isl12057"
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+ - "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source,
+   independently of the availability of an IRQ line connected to the
+   SoC.
+
+ - "interrupt-parent", "interrupts": for passing the interrupt line
+   of the SoC connected to IRQ#2 of the RTC chip.
+
+
+Example isl12057 node without IRQ#2 pin connected (no alarm support):
+
+	isl12057: isl12057@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+	};
+
+
+Example isl12057 node with IRQ#2 pin connected to main SoC via MPP6 (note
+that the pinctrl-related properties below are given for completeness and
+may not be required or may be different depending on your system or
+SoC, and the main function of the MPP used as IRQ line, i.e.
+"interrupt-parent" and "interrupts" are usually sufficient):
+
+		    pinctrl {
+				...
+
+				rtc_alarm_pin: rtc_alarm_pin {
+					marvell,pins = "mpp6";
+					marvell,function = "gpio";
+				};
+
+				...
+
+		    };
+
+	...
+
+	isl12057: isl12057@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+		pinctrl-0 = <&rtc_alarm_pin>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+
+Example isl12057 node without IRQ#2 pin connected to the SoC but to a
+PMIC, allowing the device to be started based on configured alarm:
+
+	isl12057: isl12057@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+		isil,irq2-can-wakeup-machine;
+	};