diff options
| author |   Kishon Vijay Abraham I <kishon@ti.com> | 2013-03-07 19:05:16 +0530 |
|---|---|---|
| committer |   Benoit Cousson <benoit.cousson@linaro.org> | 2013-04-09 00:21:00 +0200 |
| commit | ad871c10b55654910ba97af00a00e65725da5e40 (patch) | |
| tree | 8d4a0147738db3942a0537a070706a10cc05973c /Documentation/devicetree/bindings/usb/omap-usb.txt | |
| parent | ARM: dts: OMAP4: Add omap-usb2 data (diff) | |
| download | linux-dev-ad871c10b55654910ba97af00a00e65725da5e40.tar.xz linux-dev-ad871c10b55654910ba97af00a00e65725da5e40.zip | |
ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards
Add usb otg data node in omap4/omap3 device tree file. Also update
the node with board specific setting in omapx-<board>.dts file.
The dt data specifies among others the interface type (ULPI or UTMI),
mode which is mostly OTG, power that specifies the amount of power
this can supply when in host mode.
The information about usb otg node is available @
Documentation/devicetree/bindings/usb/omap-usb.txt
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/usb/omap-usb.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/omap-usb.txt | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 1ef0ce71f8fa..abce25684abc 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -18,6 +18,7 @@ OMAP MUSB GLUE represents PERIPHERAL. - power : Should be "50". This signifies the controller can supply upto 100mA when operating in host mode. + - usb-phy : the phandle for the PHY device Optional properties: - ctrl-module : phandle of the control module this glue uses to write to |