diff options
| author |   Rob Herring <robh@kernel.org> | 2015-09-21 10:51:09 -0500 |
|---|---|---|
| committer | Rob Herring <robh@kernel.org> | 2015-10-22 09:21:21 -0500 |
| commit | efdbd7345f8836f7495f3ac6ee237d86cb3bb6b0 (patch) | |
| tree | 58263b9ed39c7378fe8df2e796edae86815342c4 /Documentation/devicetree/bindings/video | |
| parent | Linux 4.3-rc3 (diff) | |
| download | linux-dev-efdbd7345f8836f7495f3ac6ee237d86cb3bb6b0.tar.xz linux-dev-efdbd7345f8836f7495f3ac6ee237d86cb3bb6b0.zip | |
dt-bindings: consolidate display related bindings
This is a quite large renaming to consolidate display related bindings
into a single "display" directory from various scattered locations of
video, drm, gpu, fb, mipi, and panel. The prior location was somewhat
based on the Linux driver location, but bindings should be independent
of that.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Diffstat (limited to 'Documentation/devicetree/bindings/video')
52 files changed, 0 insertions, 2899 deletions
diff --git a/Documentation/devicetree/bindings/video/adi,adv7123.txt b/Documentation/devicetree/bindings/video/adi,adv7123.txt deleted file mode 100644 index a6b2b2b8f3d9..000000000000 --- a/Documentation/devicetree/bindings/video/adi,adv7123.txt +++ /dev/null @@ -1,50 +0,0 @@ -Analog Device ADV7123 Video DAC -------------------------------- - -The ADV7123 is a digital-to-analog converter that outputs VGA signals from a -parallel video input. - -Required properties: - -- compatible: Should be "adi,adv7123" - -Optional properties: - -- psave-gpios: Power save control GPIO - -Required nodes: - -The ADV7123 has two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for DPI input -- Video port 1 for VGA output - - -Example -------- - - adv7123: encoder@0 { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adv7123_in: endpoint@0 { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - adv7123_out: endpoint@0 { - remote-endpoint = <&vga_connector_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/adi,adv7511.txt b/Documentation/devicetree/bindings/video/adi,adv7511.txt deleted file mode 100644 index 96c25ee01501..000000000000 --- a/Documentation/devicetree/bindings/video/adi,adv7511.txt +++ /dev/null @@ -1,88 +0,0 @@ -Analog Device ADV7511(W)/13 HDMI Encoders ------------------------------------------ - -The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters -compatible with HDMI 1.4 and DVI 1.0. They support color space conversion, -S/PDIF, CEC and HDCP. - -Required properties: - -- compatible: Should be one of "adi,adv7511", "adi,adv7511w" or "adi,adv7513" -- reg: I2C slave address - -The ADV7511 supports a large number of input data formats that differ by their -color depth, color format, clock mode, bit justification and random -arrangement of components on the data bus. The combination of the following -properties describe the input and map directly to the video input tables of the -ADV7511 datasheet that document all the supported combinations. - -- adi,input-depth: Number of bits per color component at the input (8, 10 or - 12). -- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or - "yuv444". -- adi,input-clock: The input clock type, one of "1x" (one clock cycle per - pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel, - data driven on both edges). - -The following input format properties are required except in "rgb 1x" and -"yuv444 1x" modes, in which case they must not be specified. - -- adi,input-style: The input components arrangement variant (1, 2 or 3), as - listed in the input format tables in the datasheet. -- adi,input-justification: The input bit justification ("left", "evenly", - "right"). - -Optional properties: - -- interrupts: Specifier for the ADV7511 interrupt -- pd-gpios: Specifier for the GPIO connected to the power down signal - -- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps - (-1200 ps .. 1600 ps). Defaults to no delay. -- adi,embedded-sync: The input uses synchronization signals embedded in the - data stream (similar to BT.656). Defaults to separate H/V synchronization - signals. - -Required nodes: - -The ADV7511 has two video ports. Their connections are modelled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for the RGB or YUV input -- Video port 1 for the HDMI output - - -Example -------- - - adv7511w: hdmi@39 { - compatible = "adi,adv7511w"; - reg = <39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_EDGE_FALLING>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511w_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/analog-tv-connector.txt b/Documentation/devicetree/bindings/video/analog-tv-connector.txt deleted file mode 100644 index 0c0970c210ab..000000000000 --- a/Documentation/devicetree/bindings/video/analog-tv-connector.txt +++ /dev/null @@ -1,25 +0,0 @@ -Analog TV Connector -=================== - -Required properties: -- compatible: "composite-video-connector" or "svideo-connector" - -Optional properties: -- label: a symbolic name for the connector - -Required nodes: -- Video port for TV input - -Example -------- - -tv: connector { - compatible = "composite-video-connector"; - label = "tv"; - - port { - tv_connector_in: endpoint { - remote-endpoint = <&venc_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/arm,pl11x.txt b/Documentation/devicetree/bindings/video/arm,pl11x.txt deleted file mode 100644 index 3e3039a8a253..000000000000 --- a/Documentation/devicetree/bindings/video/arm,pl11x.txt +++ /dev/null @@ -1,109 +0,0 @@ -* ARM PrimeCell Color LCD Controller PL110/PL111 - -See also Documentation/devicetree/bindings/arm/primecell.txt - -Required properties: - -- compatible: must be one of: - "arm,pl110", "arm,primecell" - "arm,pl111", "arm,primecell" - -- reg: base address and size of the control registers block - -- interrupt-names: either the single entry "combined" representing a - combined interrupt output (CLCDINTR), or the four entries - "mbe", "vcomp", "lnbu", "fuf" representing the individual - CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts - -- interrupts: contains an interrupt specifier for each entry in - interrupt-names - -- clock-names: should contain "clcdclk" and "apb_pclk" - -- clocks: contains phandle and clock specifier pairs for the entries - in the clock-names property. See - Documentation/devicetree/binding/clock/clock-bindings.txt - -Optional properties: - -- memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer - may be located anywhere in the memory - -- max-memory-bandwidth: maximum bandwidth in bytes per second that the - cell's memory interface can handle; if not present, the memory - interface is fast enough to handle all possible video modes - -Required sub-nodes: - -- port: describes LCD panel signals, following the common binding - for video transmitter interfaces; see - Documentation/devicetree/bindings/media/video-interfaces.txt; - when it is a TFT panel, the port's endpoint must define the - following property: - - - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values, - defining the way CLD pads are wired up; first value - contains index of the "CLD" external pin (pad) used - as R0 (first bit of the red component), second value - index of the pad used as G0, third value index of the - pad used as B0, see also "LCD panel signal multiplexing - details" paragraphs in the PL110/PL111 Technical - Reference Manuals; this implicitly defines available - color modes, for example: - - PL111 TFT 4:4:4 panel: - arm,pl11x,tft-r0g0b0-pads = <4 15 20>; - - PL110 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <1 7 13>; - - PL111 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 11 19>; - - PL111 TFT 5:6:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 10 19>; - - PL110 and PL111 TFT 8:8:8 panel: - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: - arm,pl11x,tft-r0g0b0-pads = <16 8 0>; - - -Example: - - clcd@10020000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x10020000 0x1000>; - interrupt-names = "combined"; - interrupts = <0 44 4>; - clocks = <&oscclk1>, <&oscclk2>; - clock-names = "clcdclk", "apb_pclk"; - max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ - - port { - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - }; - }; - - }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; - }; - }; diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt deleted file mode 100644 index ecb8da063d07..000000000000 --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt +++ /dev/null @@ -1,89 +0,0 @@ -Atmel LCDC Framebuffer ------------------------------------------------------ - -Required properties: -- compatible : - "atmel,at91sam9261-lcdc" , - "atmel,at91sam9263-lcdc" , - "atmel,at91sam9g10-lcdc" , - "atmel,at91sam9g45-lcdc" , - "atmel,at91sam9g45es-lcdc" , - "atmel,at91sam9rl-lcdc" , - "atmel,at32ap-lcdc" -- reg : Should contain 1 register ranges(address and length). - Can contain an additional register range(address and length) - for fixed framebuffer memory. Useful for dedicated memories. -- interrupts : framebuffer controller interrupt -- display: a phandle pointing to the display node - -Required nodes: -- display: a display node is required to initialize the lcd panel - This should be in the board dts. -- default-mode: a videomode within the display with timing parameters - as specified below. - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. - -Example: - - fb0: fb@0x00500000 { - compatible = "atmel,at91sam9g45-lcdc"; - reg = <0x00500000 0x1000>; - interrupts = <23 3 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fb>; - display = <&display0>; - status = "okay"; - #address-cells = <1>; - #size-cells = <1>; - - }; - -Example for fixed framebuffer memory: - - fb0: fb@0x00500000 { - compatible = "atmel,at91sam9263-lcdc"; - reg = <0x00700000 0x1000 0x70000000 0x200000>; - [...] - }; - -Atmel LCDC Display ------------------------------------------------------ -Required properties (as per of_videomode_helper): - - - atmel,dmacon: dma controller configuration - - atmel,lcdcon2: lcd controller configuration - - atmel,guard-time: lcd guard time (Delay in frame periods) - - bits-per-pixel: lcd panel bit-depth. - -Optional properties (as per of_videomode_helper): - - atmel,lcdcon-backlight: enable backlight - - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity - - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" - - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) - -Example: - display0: display { - bits-per-pixel = <32>; - atmel,lcdcon-backlight; - atmel,dmacon = <0x1>; - atmel,lcdcon2 = <0x80008002>; - atmel,guard-time = <9>; - atmel,lcd-wiring-mode = <1>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hback-porch = <1>; - hfront-porch = <1>; - vback-porch = <40>; - vfront-porch = <1>; - hsync-len = <45>; - vsync-len = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/bridge/ps8622.txt b/Documentation/devicetree/bindings/video/bridge/ps8622.txt deleted file mode 100644 index c989c3807f2b..000000000000 --- a/Documentation/devicetree/bindings/video/bridge/ps8622.txt +++ /dev/null @@ -1,31 +0,0 @@ -ps8622-bridge bindings - -Required properties: - - compatible: "parade,ps8622" or "parade,ps8625" - - reg: first i2c address of the bridge - - sleep-gpios: OF device-tree gpio specification for PD_ pin. - - reset-gpios: OF device-tree gpio specification for RST_ pin. - -Optional properties: - - lane-count: number of DP lanes to use - - use-external-pwm: backlight will be controlled by an external PWM - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@48 { - compatible = "parade,ps8622"; - reg = <0x48>; - sleep-gpios = <&gpc3 6 1 0 0>; - reset-gpios = <&gpc3 1 1 0 0>; - lane-count = <1>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/bridge/ptn3460.txt b/Documentation/devicetree/bindings/video/bridge/ptn3460.txt deleted file mode 100644 index 361971ba104d..000000000000 --- a/Documentation/devicetree/bindings/video/bridge/ptn3460.txt +++ /dev/null @@ -1,39 +0,0 @@ -ptn3460 bridge bindings - -Required properties: - - compatible: "nxp,ptn3460" - - reg: i2c address of the bridge - - powerdown-gpio: OF device-tree gpio specification for PD_N pin. - - reset-gpio: OF device-tree gpio specification for RST_N pin. - - edid-emulation: The EDID emulation entry to use - +-------+------------+------------------+ - | Value | Resolution | Description | - | 0 | 1024x768 | NXP Generic | - | 1 | 1920x1080 | NXP Generic | - | 2 | 1920x1080 | NXP Generic | - | 3 | 1600x900 | Samsung LTM200KT | - | 4 | 1920x1080 | Samsung LTM230HT | - | 5 | 1366x768 | NXP Generic | - | 6 | 1600x900 | ChiMei M215HGE | - +-------+------------+------------------+ - - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpio = <&gpy2 5 1 0 0>; - reset-gpio = <&gpx1 5 1 0 0>; - edid-emulation = <5>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt deleted file mode 100644 index 6fc3c6adeefa..000000000000 --- a/Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Currus Logic CLPS711X Framebuffer - -Required properties: -- compatible: Shall contain "cirrus,clps711x-fb". -- reg : Physical base address and length of the controller's registers + - location and size of the framebuffer memory. -- clocks : phandle + clock specifier pair of the FB reference clock. -- display : phandle to a display node as described in - Documentation/devicetree/bindings/video/display-timing.txt. - Additionally, the display node has to define properties: - - bits-per-pixel: Bits per pixel. - - ac-prescale : LCD AC bias frequency. This frequency is the required - AC bias frequency for a given manufacturer's LCD plate. - - cmap-invert : Invert the color levels (Optional). - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. - -Example: - fb: fb@800002c0 { - compatible = "cirrus,ep7312-fb", "cirrus,clps711x-fb"; - reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; - clocks = <&clks 2>; - lcd-supply = <®5v0>; - display = <&display>; - }; - - display: display { - model = "320x240x4"; - native-mode = <&timing0>; - bits-per-pixel = <4>; - ac-prescale = <17>; - - display-timings { - timing0: 320x240 { - hactive = <320>; - hback-porch = <0>; - hfront-porch = <0>; - hsync-len = <0>; - vactive = <240>; - vback-porch = <0>; - vfront-porch = <0>; - vsync-len = <0>; - clock-frequency = <6500000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/display-timing.txt b/Documentation/devicetree/bindings/video/display-timing.txt deleted file mode 100644 index e1d4a0b59612..000000000000 --- a/Documentation/devicetree/bindings/video/display-timing.txt +++ /dev/null @@ -1,110 +0,0 @@ -display-timing bindings -======================= - -display-timings node --------------------- - -required properties: - - none - -optional properties: - - native-mode: The native mode for the display, in case multiple modes are - provided. When omitted, assume the first node is the native. - -timing subnode --------------- - -required properties: - - hactive, vactive: display resolution - - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters - in pixels - vfront-porch, vback-porch, vsync-len: vertical display timing parameters in - lines - - clock-frequency: display clock in Hz - -optional properties: - - hsync-active: hsync pulse is active low/high/ignored - - vsync-active: vsync pulse is active low/high/ignored - - de-active: data-enable pulse is active low/high/ignored - - pixelclk-active: with - - active high = drive pixel data on rising edge/ - sample data on falling edge - - active low = drive pixel data on falling edge/ - sample data on rising edge - - ignored = ignored - - interlaced (bool): boolean to enable interlaced mode - - doublescan (bool): boolean to enable doublescan mode - - doubleclk (bool): boolean to enable doubleclock mode - -All the optional properties that are not bool follow the following logic: - <1>: high active - <0>: low active - omitted: not used on hardware - -There are different ways of describing the capabilities of a display. The -devicetree representation corresponds to the one commonly found in datasheets -for displays. If a display supports multiple signal timings, the native-mode -can be specified. - -The parameters are defined as: - - +----------+-------------------------------------+----------+-------+ - | | ↑ | | | - | | |vback_porch | | | - | | ↓ | | | - +----------#######################################----------+-------+ - | # ↑ # | | - | # | # | | - | hback # | # hfront | hsync | - | porch # | hactive # porch | len | - |<-------->#<-------+--------------------------->#<-------->|<----->| - | # | # | | - | # |vactive # | | - | # | # | | - | # ↓ # | | - +----------#######################################----------+-------+ - | | ↑ | | | - | | |vfront_porch | | | - | | ↓ | | | - +----------+-------------------------------------+----------+-------+ - | | ↑ | | | - | | |vsync_len | | | - | | ↓ | | | - +----------+-------------------------------------+----------+-------+ - -Example: - - display-timings { - native-mode = <&timing0>; - timing0: 1080p24 { - /* 1920x1080p24 */ - clock-frequency = <52000000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <25>; - hback-porch = <25>; - hsync-len = <25>; - vback-porch = <2>; - vfront-porch = <2>; - vsync-len = <2>; - hsync-active = <1>; - }; - }; - -Every required property also supports the use of ranges, so the commonly used -datasheet description with minimum, typical and maximum values can be used. - -Example: - - timing1: timing { - /* 1920x1080p24 */ - clock-frequency = <148500000>; - hactive = <1920>; - vactive = <1080>; - hsync-len = <0 44 60>; - hfront-porch = <80 88 95>; - hback-porch = <100 148 160>; - vfront-porch = <0 4 6>; - vback-porch = <0 36 50>; - vsync-len = <0 5 6>; - }; diff --git a/Documentation/devicetree/bindings/video/dvi-connector.txt b/Documentation/devicetree/bindings/video/dvi-connector.txt deleted file mode 100644 index fc53f7c60bc6..000000000000 --- a/Documentation/devicetree/bindings/video/dvi-connector.txt +++ /dev/null @@ -1,35 +0,0 @@ -DVI Connector -============== - -Required properties: -- compatible: "dvi-connector" - -Optional properties: -- label: a symbolic name for the connector -- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC -- analog: the connector has DVI analog pins -- digital: the connector has DVI digital pins -- dual-link: the connector has pins for DVI dual-link - -Required nodes: -- Video port for DVI input - -Note: One (or both) of 'analog' or 'digital' must be set. - -Example -------- - -dvi0: connector@0 { - compatible = "dvi-connector"; - label = "dvi"; - - digital; - - ddc-i2c-bus = <&i2c3>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt deleted file mode 100644 index 668091f27674..000000000000 --- a/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt +++ /dev/null @@ -1,46 +0,0 @@ -Rockchip specific extensions to the Synopsys Designware HDMI -================================ - -Required properties: -- compatible: "rockchip,rk3288-dw-hdmi"; -- reg: Physical base address and length of the controller's registers. -- clocks: phandle to hdmi iahb and isfr clocks. -- clock-names: should be "iahb" "isfr" -- rockchip,grf: this soc should set GRF regs to mux vopl/vopb. -- interrupts: HDMI interrupt number -- ports: contain a port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. For - vopb,set the reg = <0> and set the reg = <1> for vopl. -- reg-io-width: the width of the reg:1,4, the value should be 4 on - rk3288 platform - -Optional properties -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing -- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec" - -Example: -hdmi: hdmi@ff980000 { - compatible = "rockchip,rk3288-dw-hdmi"; - reg = <0xff980000 0x20000>; - reg-io-width = <4>; - ddc-i2c-bus = <&i2c5>; - rockchip,grf = <&grf>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; - clock-names = "iahb", "isfr"; - status = "disabled"; - ports { - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_hdmi>; - }; - hdmi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_hdmi>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/exynos-mic.txt b/Documentation/devicetree/bindings/video/exynos-mic.txt deleted file mode 100644 index 0fba2ee6440a..000000000000 --- a/Documentation/devicetree/bindings/video/exynos-mic.txt +++ /dev/null @@ -1,51 +0,0 @@ -Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC) - -MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is -not capable to transfer high resoltuion frame data as decon can send. MIC -solves this problem by compressing the frame data by 1/2 before it is -transferred through mipi dsi. The compressed frame data must be uncompressed in -the panel PCB. - -Required properties: -- compatible: value should be "samsung,exynos5433-mic". -- reg: physical base address and length of the MIC registers set and system - register of mic. -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0". -- samsung,disp-syscon: the reference node for syscon for DISP block. -- ports: contains a port which is connected to decon node and dsi node. - address-cells and size-cells must 1 and 0, respectively. -- port: contains an endpoint node which is connected to the endpoint in the - decon node or dsi node. The reg value must be 0 and 1 respectively. - -Example: -SoC specific DT entry: -mic: mic@13930000 { - compatible = "samsung,exynos5433-mic"; - reg = <0x13930000 0x48>; - clocks = <&cmu_disp CLK_PCLK_MIC0>, - <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; - clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; - samsung,disp-syscon = <&syscon_disp>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mic_to_decon: endpoint { - remote-endpoint = <&decon_to_mic>; - }; - }; - - port@1 { - reg = <1>; - mic_to_dsi: endpoint { - remote-endpoint = <&dsi_to_mic>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/exynos5433-decon.txt b/Documentation/devicetree/bindings/video/exynos5433-decon.txt deleted file mode 100644 index 377afbf5122a..000000000000 --- a/Documentation/devicetree/bindings/video/exynos5433-decon.txt +++ /dev/null @@ -1,65 +0,0 @@ -Device-Tree bindings for Samsung Exynos SoC display controller (DECON) - -DECON (Display and Enhancement Controller) is the Display Controller for the -Exynos series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be "samsung,exynos5433-decon"; -- reg: physical base address and length of the DECON registers set. -- interrupts: should contain a list of all DECON IP block interrupts in the - order: VSYNC, LCD_SYSTEM. The interrupt specifier format - depends on the interrupt controller used. -- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys" - in the same order as they were listed in the interrupts - property. -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "aclk_decon", "aclk_smmu_decon0x", - "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk", - "sclk_decon_eclk" -- ports: contains a port which is connected to mic node. address-cells and - size-cells must 1 and 0, respectively. -- port: contains an endpoint node which is connected to the endpoint in the mic - node. The reg value muset be 0. -- i80-if-timings: specify whether the panel which is connected to decon uses - i80 lcd interface or mipi video interface. This node contains - no timing information as that of fimd does. Because there is - no register in decon to specify i80 interface timing value, - it is not needed, but make it remain to use same kind of node - in fimd and exynos7 decon. - -Example: -SoC specific DT entry: -decon: decon@13800000 { - compatible = "samsung,exynos5433-decon"; - reg = <0x13800000 0x2104>; - clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>, - <&cmu_disp CLK_ACLK_XIU_DECON0X>, - <&cmu_disp CLK_PCLK_SMMU_DECON0X>, - <&cmu_disp CLK_SCLK_DECON_VCLK>, - <&cmu_disp CLK_SCLK_DECON_ECLK>; - clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", - "pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk"; - interrupt-names = "vsync", "lcd_sys"; - interrupts = <0 202 0>, <0 203 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - decon_to_mic: endpoint { - remote-endpoint = <&mic_to_decon>; - }; - }; - }; -}; - -Board specific DT entry: -&decon { - i80-if-timings { - }; -}; diff --git a/Documentation/devicetree/bindings/video/exynos7-decon.txt b/Documentation/devicetree/bindings/video/exynos7-decon.txt deleted file mode 100644 index f5f9c8d4a55a..000000000000 --- a/Documentation/devicetree/bindings/video/exynos7-decon.txt +++ /dev/null @@ -1,68 +0,0 @@ -Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON) - -DECON (Display and Enhancement Controller) is the Display Controller for the -Exynos7 series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be "samsung,exynos7-decon"; - -- reg: physical base address and length of the DECON registers set. - -- interrupt-parent: should be the phandle of the decon controller's - parent interrupt controller. - -- interrupts: should contain a list of all DECON IP block interrupts in the - order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- interrupt-names: should contain the interrupt names: "fifo", "vsync", - "lcd_sys", in the same order as they were listed in the interrupts - property. - -- pinctrl-0: pin control group to be used for this controller. - -- pinctrl-names: must contain a "default" entry. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "pclk_decon0", "aclk_decon0", - "decon0_eclk", "decon0_vclk". -- i80-if-timings: timing configuration for lcd i80 interface support. - -Optional Properties: -- samsung,power-domain: a phandle to DECON power domain node. -- display-timings: timing settings for DECON, as described in document [1]. - Can be used in case timings cannot be provided otherwise - or to override timings provided by the panel. - -[1]: Documentation/devicetree/bindings/video/display-timing.txt - -Example: - -SoC specific DT entry: - - decon@13930000 { - compatible = "samsung,exynos7-decon"; - interrupt-parent = <&combiner>; - reg = <0x13930000 0x1000>; - interrupt-names = "lcd_sys", "vsync", "fifo"; - interrupts = <0 188 0>, <0 189 0>, <0 190 0>; - clocks = <&clock_disp PCLK_DECON_INT>, - <&clock_disp ACLK_DECON_INT>, - <&clock_disp SCLK_DECON_INT_ECLK>, - <&clock_disp SCLK_DECON_INT_EXTCLKPLL>; - clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk", - "decon0_vclk"; - status = "disabled"; - }; - -Board specific DT entry: - - decon@13930000 { - pinctrl-0 = <&lcd_clk &pwm1_out>; - pinctrl-names = "default"; - status = "okay"; - }; diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt deleted file mode 100644 index 7a3a9cdb86ab..000000000000 --- a/Documentation/devicetree/bindings/video/exynos_dp.txt +++ /dev/null @@ -1,120 +0,0 @@ -The Exynos display port interface should be configured based on -the type of panel connected to it. - -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: deprecated, use phys and phy-names - -reg: deprecated - Base address of DP PHY register. - -samsung,enable-mask: deprecated - The bit-mask used to enable/disable DP PHY. - -For the Panel initialization, we read data from dp-controller node. -Required properties for dp-controller: - -compatible: - should be "samsung,exynos5-dp". - -reg: - physical base address of the controller and length - of memory mapped region. - -interrupts: - interrupt combiner values. - -clocks: - from common clock binding: handle to dp clock. - -clock-names: - from common clock binding: Shall be "dp". - -interrupt-parent: - phandle to Interrupt combiner node. - -phys: - from general PHY binding: the phandle for the PHY device. - -phy-names: - from general PHY binding: Should be "dp". - -samsung,color-space: - input video data format. - COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2 - -samsung,dynamic-range: - dynamic range for input video data. - VESA = 0, CEA = 1 - -samsung,ycbcr-coeff: - YCbCr co-efficients for input video. - COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1 - -samsung,color-depth: - number of bits per colour component. - COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3 - -samsung,link-rate: - link rate supported by the panel. - LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A - -samsung,lane-count: - number of lanes supported by the panel. - LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4 - - display-timings: timings for the connected panel as described by - Documentation/devicetree/bindings/video/display-timing.txt - -Optional properties for dp-controller: - -interlaced: - interlace scan mode. - Progressive if defined, Interlaced if not defined - -vsync-active-high: - VSYNC polarity configuration. - High if defined, Low if not defined - -hsync-active-high: - HSYNC polarity configuration. - High if defined, Low if not defined - -samsung,hpd-gpio: - Hotplug detect GPIO. - Indicates which GPIO should be used for hotplug - detection - -video interfaces: Device node can contain video interface port - nodes according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - -SOC specific portion: - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x10000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - clocks = <&clock 342>; - clock-names = "dp"; - - phys = <&dp_phy>; - phy-names = "dp"; - }; - -Board Specific portion: - dp-controller { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - - display-timings { - native-mode = <&lcd_timing>; - lcd_timing: 1366x768 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; - - ports { - port@0 { - dp_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt deleted file mode 100644 index 0be036270661..000000000000 --- a/Documentation/devicetree/bindings/video/exynos_dsim.txt +++ /dev/null @@ -1,103 +0,0 @@ -Exynos MIPI DSI Master - -Required properties: - - compatible: value should be one of the following - "samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */ - "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */ - "samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */ - "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */ - "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */ - - reg: physical base address and length of the registers set for the device - - interrupts: should contain DSI interrupt - - clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names - - clock-names: should include "bus_clk"and "sclk_mipi" entries - the use of "pll_clk" is deprecated - - phys: list of phy specifiers, must contain an entry for each required - entry in phy-names - - phy-names: should include "dsim" entry - - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V) - - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V) - - samsung,pll-clock-frequency: specifies frequency of the oscillator clock - - #address-cells, #size-cells: should be set respectively to <1> and <0> - according to DSI host bindings (see MIPI DSI bindings [1]) - -Optional properties: - - power-domains: a phandle to DSIM power domain node - -Child nodes: - Should contain DSI peripheral nodes (see MIPI DSI bindings [1]). - -Video interfaces: - Device node can contain video interface port nodes according to [2]. - The following are properties specific to those nodes: - - port node inbound: - - reg: (required) must be 0. - port node outbound: - - reg: (required) must be 1. - - endpoint node connected from mic node (reg = 0): - - remote-endpoint: specifies the endpoint in mic node. This node is required - for Exynos5433 mipi dsi. So mic can access to panel node - thoughout this dsi node. - endpoint node connected to panel node (reg = 1): - - remote-endpoint: specifies the endpoint in panel node. This node is - required in all kinds of exynos mipi dsi to represent - the connection between mipi dsi and panel. - - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst - mode - - samsung,esc-clock-frequency: specifies DSI frequency in escape mode - -[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - dsi@11C80000 { - compatible = "samsung,exynos4210-mipi-dsi"; - reg = <0x11C80000 0x10000>; - interrupts = <0 79 0>; - clocks = <&clock 286>, <&clock 143>; - clock-names = "bus_clk", "sclk_mipi"; - phys = <&mipi_phy 1>; - phy-names = "dsim"; - vddcore-supply = <&vusb_reg>; - vddio-supply = <&vmipi_reg>; - power-domains = <&pd_lcd0>; - #address-cells = <1>; - #size-cells = <0>; - samsung,pll-clock-frequency = <24000000>; - - panel@1 { - reg = <0>; - ... - port { - panel_ep: endpoint { - remote-endpoint = <&dsi_ep>; - }; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - decon_to_mic: endpoint { - remote-endpoint = <&mic_to_decon>; - }; - }; - - port@1 { - reg = <1>; - dsi_ep: endpoint { - reg = <0>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - remote-endpoint = <&panel_ep>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt deleted file mode 100644 index 1fd8cf9cbfac..000000000000 --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt +++ /dev/null @@ -1,43 +0,0 @@ -Device-Tree bindings for drm hdmi driver - -Required properties: -- compatible: value should be one among the following: - 1) "samsung,exynos5-hdmi" <DEPRECATED> - 2) "samsung,exynos4210-hdmi" - 3) "samsung,exynos4212-hdmi" - 4) "samsung,exynos5420-hdmi" -- reg: physical base address of the hdmi and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- hpd-gpio: following information about the hotplug gpio pin. - a) phandle of the gpio controller node. - b) pin number within the gpio controller. - c) optional flags and pull up/down. -- clocks: list of clock IDs from SoC clock driver. - a) hdmi: Gate of HDMI IP bus clock. - b) sclk_hdmi: Gate of HDMI special clock. - c) sclk_pixel: Pixel special clock, one of the two possible inputs of - HDMI clock mux. - d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of - HDMI clock mux. - e) mout_hdmi: It is required by the driver to switch between the 2 - parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable - after configuration, parent is set to sclk_hdmiphy else - sclk_pixel. -- clock-names: aliases as per driver requirements for above clock IDs: - "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". -- ddc: phandle to the hdmi ddc node -- phy: phandle to the hdmi phy node -- samsung,syscon-phandle: phandle for system controller node for PMU. - -Example: - - hdmi { - compatible = "samsung,exynos4212-hdmi"; - reg = <0x14530000 0x100000>; - interrupts = <0 95 0>; - hpd-gpio = <&gpx3 7 1>; - ddc = <&hdmi_ddc_node>; - phy = <&hdmi_phy_node>; - samsung,syscon-phandle = <&pmu_system_controller>; - }; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt deleted file mode 100644 index 41eee971562b..000000000000 --- a/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt +++ /dev/null @@ -1,15 +0,0 @@ -Device-Tree bindings for hdmiddc driver - -Required properties: -- compatible: value should be one of the following - 1) "samsung,exynos5-hdmiddc" <DEPRECATED> - 2) "samsung,exynos4210-hdmiddc" - -- reg: I2C address of the hdmiddc device. - -Example: - - hdmiddc { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt deleted file mode 100644 index 162f641f7639..000000000000 --- a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt +++ /dev/null @@ -1,15 +0,0 @@ -Device-Tree bindings for hdmiphy driver - -Required properties: -- compatible: value should be one of the following: - 1) "samsung,exynos5-hdmiphy" <DEPRECATED> - 2) "samsung,exynos4210-hdmiphy". - 3) "samsung,exynos4212-hdmiphy". -- reg: I2C address of the hdmiphy device. - -Example: - - hdmiphy { - compatible = "samsung,exynos4210-hdmiphy"; - reg = <0x38>; - }; diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt deleted file mode 100644 index 3e38128f866b..000000000000 --- a/Documentation/devicetree/bindings/video/exynos_mixer.txt +++ /dev/null @@ -1,26 +0,0 @@ -Device-Tree bindings for mixer driver - -Required properties: -- compatible: value should be one of the following: - 1) "samsung,exynos5-mixer" <DEPRECATED> - 2) "samsung,exynos4210-mixer" - 3) "samsung,exynos4212-mixer" - 4) "samsung,exynos5250-mixer" - 5) "samsung,exynos5420-mixer" - -- reg: physical base address of the mixer and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- clocks: list of clock IDs from SoC clock driver. - a) mixer: Gate of Mixer IP bus clock. - b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of - mixer mux. - c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi. - -Example: - - mixer { - compatible = "samsung,exynos5250-mixer"; - reg = <0x14450000 0x10000>; - interrupts = <0 94 0>; - }; diff --git a/Documentation/devicetree/bindings/video/fsl,dcu.txt b/Documentation/devicetree/bindings/video/fsl,dcu.txt deleted file mode 100644 index ebf1be9ae393..000000000000 --- a/Documentation/devicetree/bindings/video/fsl,dcu.txt +++ /dev/null @@ -1,22 +0,0 @@ -Device Tree bindings for Freescale DCU DRM Driver - -Required properties: -- compatible: Should be one of - * "fsl,ls1021a-dcu". - * "fsl,vf610-dcu". - -- reg: Address and length of the register set for dcu. -- clocks: From common clock binding: handle to dcu clock. -- clock-names: From common clock binding: Shall be "dcu". -- big-endian Boolean property, LS1021A DCU registers are big-endian. -- fsl,panel: The phandle to panel node. - -Examples: -dcu: dcu@2ce0000 { - compatible = "fsl,ls1021a-dcu"; - reg = <0x0 0x2ce0000 0x0 0x10000>; - clocks = <&platform_clk 0>; - clock-names = "dcu"; - big-endian; - fsl,panel = <&panel>; -}; diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt deleted file mode 100644 index 8c8c2f4e4c3f..000000000000 --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt +++ /dev/null @@ -1,55 +0,0 @@ -Freescale imx21 Framebuffer - -This framebuffer driver supports devices imx1, imx21, imx25, and imx27. - -Required properties: -- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21 -- reg : Should contain 1 register ranges(address and length) -- interrupts : One interrupt of the fb dev - -Required nodes: -- display: Phandle to a display node as described in - Documentation/devicetree/bindings/video/display-timing.txt - Additional, the display node has to define properties: - - bits-per-pixel: Bits per pixel - - fsl,pcr: LCDC PCR value - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. -- fsl,dmacr: DMA Control Register value. This is optional. By default, the - register is not modified as recommended by the datasheet. -- fsl,lpccr: Contrast Control Register value. This property provides the - default value for the contrast control register. - If that property is omitted, the register is zeroed. -- fsl,lscr1: LCDC Sharp Configuration Register value. - -Example: - - imxfb: fb@10021000 { - compatible = "fsl,imx21-fb"; - interrupts = <61>; - reg = <0x10021000 0x1000>; - display = <&display0>; - }; - - ... - - display0: display0 { - model = "Primeview-PD050VL1"; - native-mode = <&timing_disp0>; - bits-per-pixel = <16>; - fsl,pcr = <0xf0c88080>; /* non-standard but required */ - display-timings { - timing_disp0: 640x480 { - hactive = <640>; - vactive = <480>; - hback-porch = <112>; - hfront-porch = <36>; - hsync-len = <32>; - vback-porch = <33>; - vfront-porch = <33>; - vsync-len = <2>; - clock-frequency = <25000000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/hdmi-connector.txt b/Documentation/devicetree/bindings/video/hdmi-connector.txt deleted file mode 100644 index acd5668b1ce1..000000000000 --- a/Documentation/devicetree/bindings/video/hdmi-connector.txt +++ /dev/null @@ -1,29 +0,0 @@ -HDMI Connector -============== - -Required properties: -- compatible: "hdmi-connector" -- type: the HDMI connector type: "a", "b", "c", "d" or "e" - -Optional properties: -- label: a symbolic name for the connector -- hpd-gpios: HPD GPIO number - -Required nodes: -- Video port for HDMI input - -Example -------- - -hdmi0: connector@1 { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt deleted file mode 100644 index 1a1e653e5407..000000000000 --- a/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt +++ /dev/null @@ -1,33 +0,0 @@ -LG.Philips LB035Q02 Panel -========================= - -Required properties: -- compatible: "lgphilips,lb035q02" -- enable-gpios: panel enable gpio - -Optional properties: -- label: a symbolic name for the panel - -Required nodes: -- Video port for DPI input - -Example -------- - -lcd-panel: panel@0 { - compatible = "lgphilips,lb035q02"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - - enable-gpios = <&gpio7 7 0>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/panel-dpi.txt b/Documentation/devicetree/bindings/video/panel-dpi.txt deleted file mode 100644 index a40180b05bab..000000000000 --- a/Documentation/devicetree/bindings/video/panel-dpi.txt +++ /dev/null @@ -1,45 +0,0 @@ -Generic MIPI DPI Panel -====================== - -Required properties: -- compatible: "panel-dpi" - -Optional properties: -- label: a symbolic name for the panel -- enable-gpios: panel enable gpio - -Required nodes: -- "panel-timing" containing video timings - (Documentation/devicetree/bindings/video/display-timing.txt) -- Video port for DPI input - -Example -------- - -lcd0: display@0 { - compatible = "samsung,lte430wq-f0c", "panel-dpi"; - label = "lcd"; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - panel-timing { - clock-frequency = <9200000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <8>; - hback-porch = <4>; - hsync-len = <41>; - vback-porch = <2>; - vfront-porch = <4>; - vsync-len = <10>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/video/panel-dsi-cm.txt b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt deleted file mode 100644 index dce48eb9db57..000000000000 --- a/Documentation/devicetree/bindings/video/panel-dsi-cm.txt +++ /dev/null @@ -1,29 +0,0 @@ -Generic MIPI DSI Command Mode Panel -=================================== - -Required properties: -- compatible: "panel-dsi-cm" - -Optional properties: -- label: a symbolic name for the panel -- reset-gpios: panel reset gpio -- te-gpios: panel TE gpio - -Required nodes: -- Video port for DSI input - -Example -------- - -lcd0: display { - compatible = "tpo,taal", "panel-dsi-cm"; - label = "lcd0"; - - reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt deleted file mode 100644 index c902323928f7..000000000000 --- a/Documentation/devicetree/bindings/video/renesas,du.txt +++ /dev/null @@ -1,88 +0,0 @@ -* Renesas R-Car Display Unit (DU) - -Required Properties: - - - compatible: must be one of the following. - - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - - "renesas,du-r8a7791" for R8A7791 (R-Car M2) compatible DU - - - reg: A list of base address and length of each memory resource, one for - each entry in the reg-names property. - - reg-names: Name of the memory resources. The DU requires one memory - resource for the DU core (named "du") and one memory resource for each - LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical - index). - - - interrupt-parent: phandle of the parent interrupt controller. - - interrupts: Interrupt specifiers for the DU interrupts. - - - clocks: A list of phandles + clock-specifier pairs, one for each entry in - the clock-names property. - - clock-names: Name of the clocks. This property is model-dependent. - - R8A7779 uses a single functional clock. The clock doesn't need to be - named. - - R8A7790 and R8A7791 use one functional clock per channel and one clock - per LVDS encoder. The functional clocks must be named "du.x" with "x" - being the channel numerical index. The LVDS clocks must be named - "lvds.x" with "x" being the LVDS encoder numerical index. - - In addition to the functional and encoder clocks, all DU versions also - support externally supplied pixel clocks. Those clocks are optional. - When supplied they must be named "dclkin.x" with "x" being the input - clock numerical index. - -Required nodes: - -The connections to the DU output video ports are modeled using the OF graph -bindings specified in Documentation/devicetree/bindings/graph.txt. - -The following table lists for each supported model the port number -corresponding to each DU output. - - Port 0 Port1 Port2 ------------------------------------------------------------------------------ - R8A7779 (H1) DPAD 0 DPAD 1 - - R8A7790 (H2) DPAD LVDS 0 LVDS 1 - R8A7791 (M2) DPAD LVDS 0 - - - -Example: R8A7790 (R-Car H2) DU - - du: du@feb00000 { - compatible = "renesas,du-r8a7790"; - reg = <0 0xfeb00000 0 0x70000>, - <0 0xfeb90000 0 0x1c>, - <0 0xfeb94000 0 0x1c>; - reg-names = "du", "lvds.0", "lvds.1"; - interrupt-parent = <&gic>; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>, - <0 269 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_DU0>, - <&mstp7_clks R8A7790_CLK_DU1>, - <&mstp7_clks R8A7790_CLK_DU2>, - <&mstp7_clks R8A7790_CLK_LVDS0>, - <&mstp7_clks R8A7790_CLK_LVDS1>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - du_out_rgb: endpoint { - }; - }; - port@1 { - reg = <1>; - du_out_lvds0: endpoint { - }; - }; - port@2 { - reg = <2>; - du_out_lvds1: endpoint { - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/rockchip-drm.txt b/Documentation/devicetree/bindings/video/rockchip-drm.txt deleted file mode 100644 index 7fff582495a2..000000000000 --- a/Documentation/devicetree/bindings/video/rockchip-drm.txt +++ /dev/null @@ -1,19 +0,0 @@ -Rockchip DRM master device -================================ - -The Rockchip DRM master device is a virtual device needed to list all -vop devices or other display interface nodes that comprise the -graphics subsystem. - -Required properties: -- compatible: Should be "rockchip,display-subsystem" -- ports: Should contain a list of phandles pointing to display interface port - of vop devices. vop definitions as defined in - Documentation/devicetree/bindings/video/rockchip-vop.txt - -example: - -display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vopl_out>, <&vopb_out>; -}; diff --git a/Documentation/devicetree/bindings/video/rockchip-vop.txt b/Documentation/devicetree/bindings/video/rockchip-vop.txt deleted file mode 100644 index d15351f2313d..000000000000 --- a/Documentation/devicetree/bindings/video/rockchip-vop.txt +++ /dev/null @@ -1,58 +0,0 @@ -device-tree bindings for rockchip soc display controller (vop) - -VOP (Visual Output Processor) is the Display Controller for the Rockchip -series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be one of the following - "rockchip,rk3288-vop"; - -- interrupts: should contain a list of all VOP IP block interrupts in the - order: VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: Must contain - aclk_vop: for ddr buffer transfer. - hclk_vop: for ahb bus to R/W the phy regs. - dclk_vop: pixel clock. - -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - axi - - ahb - - dclk - -- iommus: required a iommu node - -- port: A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: -SoC specific DT entry: - vopb: vopb@ff930000 { - compatible = "rockchip,rk3288-vop"; - reg = <0xff930000 0x19c>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; - reset-names = "axi", "ahb", "dclk"; - iommus = <&vopb_mmu>; - vopb_out: port { - #address-cells = <1>; - #size-cells = <0>; - vopb_out_edp: endpoint@0 { - reg = <0>; - remote-endpoint=<&edp_in_vopb>; - }; - vopb_out_hdmi: endpoint@1 { - reg = <1>; - remote-endpoint=<&hdmi_in_vopb>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt deleted file mode 100644 index a8bbbde03e79..000000000000 --- a/Documentation/devicetree/bindings/video/samsung-fimd.txt +++ /dev/null @@ -1,110 +0,0 @@ -Device-Tree bindings for Samsung SoC display controller (FIMD) - -FIMD (Fully Interactive Mobile Display) is the Display Controller for the -Samsung series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be one of the following - "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */ - "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */ - "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ - "samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */ - "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ - "samsung,exynos4415-fimd"; /* for Exynos4415 SoC */ - "samsung,exynos5250-fimd"; /* for Exynos5 SoCs */ - -- reg: physical base address and length of the FIMD registers set. - -- interrupt-parent: should be the phandle of the fimd controller's - parent interrupt controller. - -- interrupts: should contain a list of all FIMD IP block interrupts in the - order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- interrupt-names: should contain the interrupt names: "fifo", "vsync", - "lcd_sys", in the same order as they were listed in the interrupts - property. - -- pinctrl-0: pin control group to be used for this controller. - -- pinctrl-names: must contain a "default" entry. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "sclk_fimd" and "fimd". - -Optional Properties: -- power-domains: a phandle to FIMD power domain node. -- samsung,invert-vden: video enable signal is inverted -- samsung,invert-vclk: video clock signal is inverted -- display-timings: timing settings for FIMD, as described in document [1]. - Can be used in case timings cannot be provided otherwise - or to override timings provided by the panel. -- samsung,sysreg: handle to syscon used to control the system registers -- i80-if-timings: timing configuration for lcd i80 interface support. - - cs-setup: clock cycles for the active period of address signal is enabled - until chip select is enabled. - If not specified, the default value(0) will be used. - - wr-setup: clock cycles for the active period of CS signal is enabled until - write signal is enabled. - If not specified, the default value(0) will be used. - - wr-active: clock cycles for the active period of CS is enabled. - If not specified, the default value(1) will be used. - - wr-hold: clock cycles for the active period of CS is disabled until write - signal is disabled. - If not specified, the default value(0) will be used. - - The parameters are defined as: - - VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|?? - : : : : : - Address Output --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX - | cs-setup+1 | : : : - |<---------->| : : : - Chip Select ???????????????|____________:____________:____________|?? - | wr-setup+1 | | wr-hold+1 | - |<---------->| |<---------->| - Write Enable ????????????????????????????|____________|??????????????? - | wr-active+1| - |<---------->| - Video Data ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>-- - -The device node can contain 'port' child nodes according to the bindings defined -in [2]. The following are properties specific to those nodes: -- reg: (required) port index, can be: - 0 - for CAMIF0 input, - 1 - for CAMIF1 input, - 2 - for CAMIF2 input, - 3 - for parallel output, - 4 - for write-back interface - -[1]: Documentation/devicetree/bindings/video/display-timing.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - -SoC specific DT entry: - - fimd@11c00000 { - compatible = "samsung,exynos4210-fimd"; - interrupt-parent = <&combiner>; - reg = <0x11c00000 0x20000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <11 0>, <11 1>, <11 2>; - clocks = <&clock 140>, <&clock 283>; - clock-names = "sclk_fimd", "fimd"; - power-domains = <&pd_lcd0>; - status = "disabled"; - }; - -Board specific DT entry: - - fimd@11c00000 { - pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; - pinctrl-names = "default"; - status = "okay"; - }; diff --git a/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt b/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt deleted file mode 100644 index 0cc8981e9d49..000000000000 --- a/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt +++ /dev/null @@ -1,43 +0,0 @@ -SHARP LS037V7DW01 TFT-LCD panel -=================================== - -Required properties: -- compatible: "sharp,ls037v7dw01" - -Optional properties: -- label: a symbolic name for the panel -- enable-gpios: a GPIO spec for the optional enable pin. - This pin is the INI pin as specified in the LS037V7DW01.pdf file. -- reset-gpios: a GPIO spec for the optional reset pin. - This pin is the RESB pin as specified in the LS037V7DW01.pdf file. -- mode-gpios: a GPIO - ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file. - -Required nodes: -- Video port for DPI input - -This panel can have zero to five GPIOs to configure to change configuration -between QVGA and VGA mode and the scan direction. As these pins can be also -configured with external pulls, all the GPIOs are considered optional with holes -in the array. - -Example -------- - -Example when connected to a omap2+ based device: - -lcd0: display { - compatible = "sharp,ls037v7dw01"; - power-supply = <&lcd_3v3>; - enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ - reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ - mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ - &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ - &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer-sunxi.txt b/Documentation/devicetree/bindings/video/simple-framebuffer-sunxi.txt deleted file mode 100644 index c46ba641a1df..000000000000 --- a/Documentation/devicetree/bindings/video/simple-framebuffer-sunxi.txt +++ /dev/null @@ -1,33 +0,0 @@ -Sunxi specific Simple Framebuffer bindings - -This binding documents sunxi specific extensions to the simple-framebuffer -bindings. The sunxi simplefb u-boot code relies on the devicetree containing -pre-populated simplefb nodes. - -These extensions are intended so that u-boot can select the right node based -on which pipeline is being used. As such they are solely intended for -firmware / bootloader use, and the OS should ignore them. - -Required properties: -- compatible: "allwinner,simple-framebuffer" -- allwinner,pipeline, one of: - "de_be0-lcd0" - "de_be1-lcd1" - "de_be0-lcd0-hdmi" - "de_be1-lcd1-hdmi" - -Example: - -chosen { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>; - status = "disabled"; - }; -}; diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt deleted file mode 100644 index 4474ef6e0b95..000000000000 --- a/Documentation/devicetree/bindings/video/simple-framebuffer.txt +++ /dev/null @@ -1,86 +0,0 @@ -Simple Framebuffer - -A simple frame-buffer describes a frame-buffer setup by firmware or -the bootloader, with the assumption that the display hardware has already -been set up to scan out from the memory pointed to by the reg property. - -Since simplefb nodes represent runtime information they must be sub-nodes of -the chosen node (*). Simplefb nodes must be named "framebuffer@<address>". - -If the devicetree contains nodes for the display hardware used by a simplefb, -then the simplefb node must contain a property called "display", which -contains a phandle pointing to the primary display hw node, so that the OS -knows which simplefb to disable when handing over control to a driver for the -real hardware. The bindings for the hw nodes must specify which node is -considered the primary node. - -It is advised to add display# aliases to help the OS determine how to number -things. If display# aliases are used, then if the simplefb node contains a -"display" property then the /aliases/display# path must point to the display -hw node the "display" property points to, otherwise it must point directly -to the simplefb node. - -If a simplefb node represents the preferred console for user interaction, -then the chosen node's stdout-path property should point to it, or to the -primary display hw node, as with display# aliases. If display aliases are -used then it should be set to the alias instead. - -It is advised that devicetree files contain pre-filled, disabled framebuffer -nodes, so that the firmware only needs to update the mode information and -enable them. This way if e.g. later on support for more display clocks get -added, the simplefb nodes will already contain this info and the firmware -does not need to be updated. - -If pre-filled framebuffer nodes are used, the firmware may need extra -information to find the right node. In that case an extra platform specific -compatible and platform specific properties should be used and documented, -see e.g. simple-framebuffer-sunxi.txt . - -Required properties: -- compatible: "simple-framebuffer" -- reg: Should contain the location and size of the framebuffer memory. -- width: The width of the framebuffer in pixels. -- height: The height of the framebuffer in pixels. -- stride: The number of bytes in each line of the framebuffer. -- format: The format of the framebuffer surface. Valid values are: - - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b). - - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r). - -Optional properties: -- clocks : List of clocks used by the framebuffer. Clocks listed here - are expected to already be configured correctly. The OS must - ensure these clocks are not modified or disabled while the - simple framebuffer remains active. -- display : phandle pointing to the primary display hardware node - -Example: - -aliases { - display0 = &lcdc0; -} - -chosen { - framebuffer0: framebuffer@1d385000 { - compatible = "simple-framebuffer"; - reg = <0x1d385000 (1600 * 1200 * 2)>; - width = <1600>; - height = <1200>; - stride = <(1600 * 2)>; - format = "r5g6b5"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; - display = <&lcdc0>; - }; - stdout-path = "display0"; -}; - -soc@01c00000 { - lcdc0: lcdc@1c0c000 { - compatible = "allwinner,sun4i-a10-lcdc"; - ... - }; -}; - - -*) Older devicetree files may have a compatible = "simple-framebuffer" node -in a different place, operating systems must first enumerate any compatible -nodes found under chosen and then check for other compatible nodes. diff --git a/Documentation/devicetree/bindings/video/sony,acx565akm.txt b/Documentation/devicetree/bindings/video/sony,acx565akm.txt deleted file mode 100644 index e12333280749..000000000000 --- a/Documentation/devicetree/bindings/video/sony,acx565akm.txt +++ /dev/null @@ -1,30 +0,0 @@ -Sony ACX565AKM SDI Panel -======================== - -Required properties: -- compatible: "sony,acx565akm" - -Optional properties: -- label: a symbolic name for the panel -- reset-gpios: panel reset gpio - -Required nodes: -- Video port for SDI input - -Example -------- - -acx565akm@2 { - compatible = "sony,acx565akm"; - spi-max-frequency = <6000000>; - reg = <2>; - - label = "lcd"; - reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ - - port { - lcd_in: endpoint { - remote-endpoint = <&sdi_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/ssd1289fb.txt b/Documentation/devicetree/bindings/video/ssd1289fb.txt deleted file mode 100644 index 4fcd5e68cb6e..000000000000 --- a/Documentation/devicetree/bindings/video/ssd1289fb.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Solomon SSD1289 Framebuffer Driver - -Required properties: - - compatible: Should be "solomon,ssd1289fb". The only supported bus for - now is lbc. - - reg: Should contain address of the controller on the LBC bus. The detail - was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt - -Examples: -display@2,0 { - compatible = "solomon,ssd1289fb"; - reg = <0x2 0x0000 0x0004>; -}; diff --git a/Documentation/devicetree/bindings/video/ssd1307fb.txt b/Documentation/devicetree/bindings/video/ssd1307fb.txt deleted file mode 100644 index d1be78db63f5..000000000000 --- a/Documentation/devicetree/bindings/video/ssd1307fb.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Solomon SSD1307 Framebuffer Driver - -Required properties: - - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for - now is i2c, and the supported chips are ssd1305, ssd1306 and ssd1307. - - reg: Should contain address of the controller on the I2C bus. Most likely - 0x3c or 0x3d - - pwm: Should contain the pwm to use according to the OF device tree PWM - specification [0]. Only required for the ssd1307. - - reset-gpios: Should contain the GPIO used to reset the OLED display - - solomon,height: Height in pixel of the screen driven by the controller - - solomon,width: Width in pixel of the screen driven by the controller - - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is - mapped to. - -Optional properties: - - reset-active-low: Is the reset gpio is active on physical low? - - solomon,segment-no-remap: Display needs normal (non-inverted) data column - to segment mapping - - solomon,com-seq: Display uses sequential COM pin configuration - - solomon,com-lrremap: Display uses left-right COM pin remap - - solomon,com-invdir: Display uses inverted COM pin scan direction - - solomon,com-offset: Number of the COM pin wired to the first display line - - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles. - - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles. - This needs to be the higher, the higher the capacitance - of the OLED's pixels is - -[0]: Documentation/devicetree/bindings/pwm/pwm.txt - -Examples: -ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; - reset-active-low; -}; - -ssd1306: oled@3c { - compatible = "solomon,ssd1306fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; - reset-active-low; - solomon,com-lrremap; - solomon,com-invdir; - solomon,com-offset = <32>; -}; diff --git a/Documentation/devicetree/bindings/video/thine,thc63lvdm83d b/Documentation/devicetree/bindings/video/thine,thc63lvdm83d deleted file mode 100644 index 527e236e9a2a..000000000000 --- a/Documentation/devicetree/bindings/video/thine,thc63lvdm83d +++ /dev/null @@ -1,50 +0,0 @@ -THine Electronics THC63LVDM83D LVDS serializer ----------------------------------------------- - -The THC63LVDM83D is an LVDS serializer designed to support pixel data -transmission between a host and a flat panel. - -Required properties: - -- compatible: Should be "thine,thc63lvdm83d" - -Optional properties: - -- pwdn-gpios: Power down control GPIO - -Required nodes: - -The THC63LVDM83D has two video ports. Their connections are modeled using the -OFgraph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for CMOS/TTL input -- Video port 1 for LVDS output - - -Example -------- - - lvds_enc: encoder@0 { - compatible = "thine,thc63lvdm83d"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint@0 { - remote-endpoint = <&rgb_out>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint@0 { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/ti,dra7-dss.txt b/Documentation/devicetree/bindings/video/ti,dra7-dss.txt deleted file mode 100644 index f33a05137b0e..000000000000 --- a/Documentation/devicetree/bindings/video/ti,dra7-dss.txt +++ /dev/null @@ -1,69 +0,0 @@ -Texas Instruments DRA7x Display Subsystem -========================================= - -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic -description about OMAP Display Subsystem bindings. - -DSS Core --------- - -Required properties: -- compatible: "ti,dra7-dss" -- reg: address and length of the register spaces for 'dss' -- ti,hwmods: "dss_core" -- clocks: handle to fclk -- clock-names: "fck" -- syscon: phandle to control module core syscon node - -Optional properties: - -Some DRA7xx SoCs have one dedicated video PLL, some have two. These properties -can be used to describe the video PLLs: - -- reg: address and length of the register spaces for 'pll1_clkctrl', - 'pll1', 'pll2_clkctrl', 'pll2' -- clocks: handle to video1 pll clock and video2 pll clock -- clock-names: "video1_clk" and "video2_clk" - -Required nodes: -- DISPC - -Optional nodes: -- DSS Submodules: HDMI -- Video port for DPI output - -DPI Endpoint required properties: -- data-lines: number of lines used - - -DISPC ------ - -Required properties: -- compatible: "ti,dra7-dispc" -- reg: address and length of the register space -- ti,hwmods: "dss_dispc" -- interrupts: the DISPC interrupt -- clocks: handle to fclk -- clock-names: "fck" - -HDMI ----- - -Required properties: -- compatible: "ti,dra7-hdmi" -- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy', - 'core' -- reg-names: "wp", "pll", "phy", "core" -- interrupts: the HDMI interrupt line -- ti,hwmods: "dss_hdmi" -- vdda-supply: vdda power supply -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -Optional nodes: -- Video port for HDMI output - -HDMI Endpoint optional properties: -- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-, - D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7) diff --git a/Documentation/devicetree/bindings/video/ti,omap-dss.txt b/Documentation/devicetree/bindings/video/ti,omap-dss.txt deleted file mode 100644 index e1ef29569338..000000000000 --- a/Documentation/devicetree/bindings/video/ti,omap-dss.txt +++ /dev/null @@ -1,211 +0,0 @@ -Texas Instruments OMAP Display Subsystem -======================================== - -Generic Description -------------------- - -This document is a generic description of the OMAP Display Subsystem bindings. -Binding details for each OMAP SoC version are described in respective binding -documentation. - -The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and -a number of encoder modules. All DSS versions contain DSS Core and DISPC, but -the encoder modules vary. - -The DSS Core is the parent of the other DSS modules, and manages clock routing, -integration to the SoC, etc. - -DISPC is the display controller, which reads pixels from the memory and outputs -a RGB pixel stream to encoders. - -The encoder modules encode the received RGB pixel stream to a video output like -HDMI, MIPI DPI, etc. - -Video Ports ------------ - -The DSS Core and the encoders have video port outputs. The structure of the -video ports is described in Documentation/devicetree/bindings/graph.txt, -and the properties for the ports and endpoints for each encoder are -described in the SoC's DSS binding documentation. - -The video ports are used to describe the connections to external hardware, like -panels or external encoders. - -Aliases -------- - -The board dts file may define aliases for displays to assign "displayX" style -name for each display. If no aliases are defined, a semi-random number is used -for the display. - -Example -------- - -A shortened example of the DSS description for OMAP4, with non-relevant parts -removed, defined in omap4.dtsi: - -dss: dss@58000000 { - compatible = "ti,omap4-dss"; - reg = <0x58000000 0x80>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&dss_dss_clk>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dispc@58001000 { - compatible = "ti,omap4-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&dss_dss_clk>; - clock-names = "fck"; - }; - - hdmi: encoder@58006000 { - compatible = "ti,omap4-hdmi"; - reg = <0x58006000 0x200>, - <0x58006200 0x100>, - <0x58006300 0x100>, - <0x58006400 0x1000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; - clock-names = "fck", "sys_clk"; - }; -}; - -A shortened example of the board description for OMAP4 Panda board, defined in -omap4-panda.dts. - -The Panda board has a DVI and a HDMI connector, and the board contains a TFP410 -chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level -shifter). The video pipelines for the connectors are formed as follows: - -DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector -OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector - -/ { - aliases { - display0 = &dvi0; - display1 = &hdmi0; - }; - - tfp410: encoder@0 { - compatible = "ti,tfp410"; - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* 0, power-down */ - - pinctrl-names = "default"; - pinctrl-0 = <&tfp410_pins>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint@0 { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint@0 { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; - }; - - dvi0: connector@0 { - compatible = "dvi-connector"; - label = "dvi"; - - i2c-bus = <&i2c3>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; - }; - - tpd12s015: encoder@1 { - compatible = "ti,tpd12s015"; - - pinctrl-names = "default"; - pinctrl-0 = <&tpd12s015_pins>; - - gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ - <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ - <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint@0 { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint@0 { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - hdmi0: connector@1 { - compatible = "hdmi-connector"; - label = "hdmi"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; -}; - -&dss { - status = "ok"; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_dpi_pins>; - - port { - dpi_out: endpoint { - remote-endpoint = <&tfp410_in>; - data-lines = <24>; - }; - }; -}; - -&hdmi { - status = "ok"; - vdda-supply = <&vdac>; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_hdmi_pins>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/ti,omap2-dss.txt b/Documentation/devicetree/bindings/video/ti,omap2-dss.txt deleted file mode 100644 index fa8bb2ed1170..000000000000 --- a/Documentation/devicetree/bindings/video/ti,omap2-dss.txt +++ /dev/null @@ -1,54 +0,0 @@ -Texas Instruments OMAP2 Display Subsystem -========================================= - -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic -description about OMAP Display Subsystem bindings. - -DSS Core --------- - -Required properties: -- compatible: "ti,omap2-dss" -- reg: address and length of the register space -- ti,hwmods: "dss_core" - -Optional nodes: -- Video port for DPI output - -DPI Endpoint required properties: -- data-lines: number of lines used - - -DISPC ------ - -Required properties: -- compatible: "ti,omap2-dispc" -- reg: address and length of the register space -- ti,hwmods: "dss_dispc" -- interrupts: the DISPC interrupt - - -RFBI ----- - -Required properties: -- compatible: "ti,omap2-rfbi" -- reg: address and length of the register space -- ti,hwmods: "dss_rfbi" - - -VENC ----- - -Required properties: -- compatible: "ti,omap2-venc" -- reg: address and length of the register space -- ti,hwmods: "dss_venc" -- vdda-supply: power supply for DAC - -VENC Endpoint required properties: - -Required properties: -- ti,invert-polarity: invert the polarity of the video signal -- ti,channels: 1 for composite, 2 for s-video diff --git a/Documentation/devicetree/bindings/video/ti,omap3-dss.txt b/Documentation/devicetree/bindings/video/ti,omap3-dss.txt deleted file mode 100644 index 0023fa4b1328..000000000000 --- a/Documentation/devicetree/bindings/video/ti,omap3-dss.txt +++ /dev/null @@ -1,83 +0,0 @@ -Texas Instruments OMAP3 Display Subsystem -========================================= - -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic -description about OMAP Display Subsystem bindings. - -DSS Core --------- - -Required properties: -- compatible: "ti,omap3-dss" -- reg: address and length of the register space -- ti,hwmods: "dss_core" -- clocks: handle to fclk -- clock-names: "fck" - -Optional nodes: -- Video ports: - - Port 0: DPI output - - Port 1: SDI output - -DPI Endpoint required properties: -- data-lines: number of lines used - -SDI Endpoint required properties: -- datapairs: number of datapairs used - - -DISPC ------ - -Required properties: -- compatible: "ti,omap3-dispc" -- reg: address and length of the register space -- ti,hwmods: "dss_dispc" -- interrupts: the DISPC interrupt -- clocks: handle to fclk -- clock-names: "fck" - - -RFBI ----- - -Required properties: -- compatible: "ti,omap3-rfbi" -- reg: address and length of the register space -- ti,hwmods: "dss_rfbi" -- clocks: handles to fclk and iclk -- clock-names: "fck", "ick" - - -VENC ----- - -Required properties: -- compatible: "ti,omap3-venc" -- reg: address and length of the register space -- ti,hwmods: "dss_venc" -- vdda-supply: power supply for DAC -- clocks: handle to fclk -- clock-names: "fck" - -VENC Endpoint required properties: -- ti,invert-polarity: invert the polarity of the video signal -- ti,channels: 1 for composite, 2 for s-video - - -DSI ---- - -Required properties: -- compatible: "ti,omap3-dsi" -- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' -- reg-names: "proto", "phy", "pll" -- interrupts: the DSI interrupt line -- ti,hwmods: "dss_dsi1" -- vdd-supply: power supply for DSI -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -DSI Endpoint required properties: -- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, - DATA1+, DATA1-, ... diff --git a/Documentation/devicetree/bindings/video/ti,omap4-dss.txt b/Documentation/devicetree/bindings/video/ti,omap4-dss.txt deleted file mode 100644 index b8c29fbd1fbb..000000000000 --- a/Documentation/devicetree/bindings/video/ti,omap4-dss.txt +++ /dev/null @@ -1,115 +0,0 @@ -Texas Instruments OMAP4 Display Subsystem -========================================= - -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic -description about OMAP Display Subsystem bindings. - -DSS Core --------- - -Required properties: -- compatible: "ti,omap4-dss" -- reg: address and length of the register space -- ti,hwmods: "dss_core" -- clocks: handle to fclk -- clock-names: "fck" - -Required nodes: -- DISPC - -Optional nodes: -- DSS Submodules: RFBI, VENC, DSI, HDMI -- Video port for DPI output - -DPI Endpoint required properties: -- data-lines: number of lines used - - -DISPC ------ - -Required properties: -- compatible: "ti,omap4-dispc" -- reg: address and length of the register space -- ti,hwmods: "dss_dispc" -- interrupts: the DISPC interrupt -- clocks: handle to fclk -- clock-names: "fck" - - -RFBI ----- - -Required properties: -- compatible: "ti,omap4-rfbi" -- reg: address and length of the register space -- ti,hwmods: "dss_rfbi" -- clocks: handles to fclk and iclk -- clock-names: "fck", "ick" - -Optional nodes: -- Video port for RFBI output -- RFBI controlled peripherals - - -VENC ----- - -Required properties: -- compatible: "ti,omap4-venc" -- reg: address and length of the register space -- ti,hwmods: "dss_venc" -- vdda-supply: power supply for DAC -- clocks: handle to fclk -- clock-names: "fck" - -Optional nodes: -- Video port for VENC output - -VENC Endpoint required properties: -- ti,invert-polarity: invert the polarity of the video signal -- ti,channels: 1 for composite, 2 for s-video - - -DSI ---- - -Required properties: -- compatible: "ti,omap4-dsi" -- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' -- reg-names: "proto", "phy", "pll" -- interrupts: the DSI interrupt line -- ti,hwmods: "dss_dsi1" or "dss_dsi2" -- vdd-supply: power supply for DSI -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -Optional nodes: -- Video port for DSI output -- DSI controlled peripherals - -DSI Endpoint required properties: -- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, - DATA1+, DATA1-, ... - - -HDMI ----- - -Required properties: -- compatible: "ti,omap4-hdmi" -- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy', - 'core' -- reg-names: "wp", "pll", "phy", "core" -- interrupts: the HDMI interrupt line -- ti,hwmods: "dss_hdmi" -- vdda-supply: vdda power supply -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -Optional nodes: -- Video port for HDMI output - -HDMI Endpoint optional properties: -- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-, - D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7) diff --git a/Documentation/devicetree/bindings/video/ti,omap5-dss.txt b/Documentation/devicetree/bindings/video/ti,omap5-dss.txt deleted file mode 100644 index 38ffc8fcd816..000000000000 --- a/Documentation/devicetree/bindings/video/ti,omap5-dss.txt +++ /dev/null @@ -1,96 +0,0 @@ -Texas Instruments OMAP5 Display Subsystem -========================================= - -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic -description about OMAP Display Subsystem bindings. - -DSS Core --------- - -Required properties: -- compatible: "ti,omap5-dss" -- reg: address and length of the register space -- ti,hwmods: "dss_core" -- clocks: handle to fclk -- clock-names: "fck" - -Required nodes: -- DISPC - -Optional nodes: -- DSS Submodules: RFBI, DSI, HDMI -- Video port for DPI output - -DPI Endpoint required properties: -- data-lines: number of lines used - - -DISPC ------ - -Required properties: -- compatible: "ti,omap5-dispc" -- reg: address and length of the register space -- ti,hwmods: "dss_dispc" -- interrupts: the DISPC interrupt -- clocks: handle to fclk -- clock-names: "fck" - - -RFBI ----- - -Required properties: -- compatible: "ti,omap5-rfbi" -- reg: address and length of the register space -- ti,hwmods: "dss_rfbi" -- clocks: handles to fclk and iclk -- clock-names: "fck", "ick" - -Optional nodes: -- Video port for RFBI output -- RFBI controlled peripherals - - -DSI ---- - -Required properties: -- compatible: "ti,omap5-dsi" -- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' -- reg-names: "proto", "phy", "pll" -- interrupts: the DSI interrupt line -- ti,hwmods: "dss_dsi1" or "dss_dsi2" -- vdd-supply: power supply for DSI -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -Optional nodes: -- Video port for DSI output -- DSI controlled peripherals - -DSI Endpoint required properties: -- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, - DATA1+, DATA1-, ... - - -HDMI ----- - -Required properties: -- compatible: "ti,omap5-hdmi" -- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy', - 'core' -- reg-names: "wp", "pll", "phy", "core" -- interrupts: the HDMI interrupt line -- ti,hwmods: "dss_hdmi" -- vdda-supply: vdda power supply -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -Optional nodes: -- Video port for HDMI output - -HDMI Endpoint optional properties: -- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-, - D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7) diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt deleted file mode 100644 index f96083c0bd17..000000000000 --- a/Documentation/devicetree/bindings/video/ti,opa362.txt +++ /dev/null @@ -1,38 +0,0 @@ -OPA362 analog video amplifier - -Required properties: -- compatible: "ti,opa362" -- enable-gpios: enable/disable output gpio - -Required node: -- Video port 0 for opa362 input -- Video port 1 for opa362 output - -Example: - -tv_amp: opa362 { - compatible = "ti,opa362"; - enable-gpios = <&gpio1 23 0>; /* GPIO to enable video out amplifier */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - opa_in: endpoint@0 { - remote-endpoint = <&venc_out>; - }; - }; - - port@1 { - reg = <1>; - opa_out: endpoint@0 { - remote-endpoint = <&tv_connector_in>; - }; - }; - }; -}; - - - diff --git a/Documentation/devicetree/bindings/video/ti,tfp410.txt b/Documentation/devicetree/bindings/video/ti,tfp410.txt deleted file mode 100644 index 2cbe32a3d0bb..000000000000 --- a/Documentation/devicetree/bindings/video/ti,tfp410.txt +++ /dev/null @@ -1,41 +0,0 @@ -TFP410 DPI to DVI encoder -========================= - -Required properties: -- compatible: "ti,tfp410" - -Optional properties: -- powerdown-gpios: power-down gpio - -Required nodes: -- Video port 0 for DPI input -- Video port 1 for DVI output - -Example -------- - -tfp410: encoder@0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint@0 { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint@0 { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/ti,tpd12s015.txt b/Documentation/devicetree/bindings/video/ti,tpd12s015.txt deleted file mode 100644 index 26e6d32e3f20..000000000000 --- a/Documentation/devicetree/bindings/video/ti,tpd12s015.txt +++ /dev/null @@ -1,44 +0,0 @@ -TPD12S015 HDMI level shifter and ESD protection chip -==================================================== - -Required properties: -- compatible: "ti,tpd12s015" - -Optional properties: -- gpios: CT CP HPD, LS OE and HPD gpios - -Required nodes: -- Video port 0 for HDMI input -- Video port 1 for HDMI output - -Example -------- - -tpd12s015: encoder@1 { - compatible = "ti,tpd12s015"; - - gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ - <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ - <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint@0 { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint@0 { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt deleted file mode 100644 index 7175dc3740ac..000000000000 --- a/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt +++ /dev/null @@ -1,30 +0,0 @@ -Toppoly TD028TTEC1 Panel -======================== - -Required properties: -- compatible: "toppoly,td028ttec1" - -Optional properties: -- label: a symbolic name for the panel - -Required nodes: -- Video port for DPI input - -Example -------- - -lcd-panel: td028ttec1@0 { - compatible = "toppoly,td028ttec1"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; - diff --git a/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt b/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt deleted file mode 100644 index ec6d62975162..000000000000 --- a/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt +++ /dev/null @@ -1,33 +0,0 @@ -TPO TD043MTEA1 Panel -==================== - -Required properties: -- compatible: "tpo,td043mtea1" -- reset-gpios: panel reset gpio - -Optional properties: -- label: a symbolic name for the panel - -Required nodes: -- Video port for DPI input - -Example -------- - -lcd-panel: panel@0 { - compatible = "tpo,td043mtea1"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - - reset-gpios = <&gpio7 7 0>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/vga-connector.txt b/Documentation/devicetree/bindings/video/vga-connector.txt deleted file mode 100644 index c727f298e7ad..000000000000 --- a/Documentation/devicetree/bindings/video/vga-connector.txt +++ /dev/null @@ -1,36 +0,0 @@ -VGA Connector -============= - -Required properties: - -- compatible: "vga-connector" - -Optional properties: - -- label: a symbolic name for the connector corresponding to a hardware label -- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC - -Required nodes: - -The VGA connector internal connections are modeled using the OF graph bindings -specified in Documentation/devicetree/bindings/graph.txt. - -The VGA connector has a single port that must be connected to a video source -port. - - -Example -------- - -vga0: connector@0 { - compatible = "vga-connector"; - label = "vga"; - - ddc-i2c-bus = <&i2c3>; - - port { - vga_connector_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt deleted file mode 100644 index 2871e218a0fb..000000000000 --- a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt +++ /dev/null @@ -1,36 +0,0 @@ -VIA VT8500 Framebuffer ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-fb" -- reg : Should contain 1 register ranges(address and length) -- interrupts : framebuffer controller interrupt -- bits-per-pixel : bit depth of framebuffer (16 or 32) - -Required subnodes: -- display-timings: see display-timing.txt for information - -Example: - - fb@d8050800 { - compatible = "via,vt8500-fb"; - reg = <0xd800e400 0x400>; - interrupts = <12>; - bits-per-pixel = <16>; - - display-timings { - native-mode = <&timing0>; - timing0: 800x480 { - clock-frequency = <0>; /* unused but required */ - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <88>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt deleted file mode 100644 index a850fa011f02..000000000000 --- a/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt +++ /dev/null @@ -1,13 +0,0 @@ -VIA/Wondermedia Graphics Engine Controller ------------------------------------------------------ - -Required properties: -- compatible : "wm,prizm-ge-rops" -- reg : Should contain 1 register ranges(address and length) - -Example: - - ge_rops@d8050400 { - compatible = "wm,prizm-ge-rops"; - reg = <0xd8050400 0x100>; - }; diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt deleted file mode 100644 index 0bcadb2840a5..000000000000 --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt +++ /dev/null @@ -1,33 +0,0 @@ -Wondermedia WM8505 Framebuffer ------------------------------------------------------ - -Required properties: -- compatible : "wm,wm8505-fb" -- reg : Should contain 1 register ranges(address and length) -- bits-per-pixel : bit depth of framebuffer (16 or 32) - -Required subnodes: -- display-timings: see display-timing.txt for information - -Example: - - fb@d8051700 { - compatible = "wm,wm8505-fb"; - reg = <0xd8051700 0x200>; - bits-per-pixel = <16>; - - display-timings { - native-mode = <&timing0>; - timing0: 800x480 { - clock-frequency = <0>; /* unused but required */ - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <88>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - }; - }; - }; |