Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Here we go, another merge window full of networking and #ebpf changes:

   1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
      range without dealing with floods of ARP traffic, from Linus
      Lüssing.

   2) Throttle buffered multicast packet transmission in mt76, from
      Felix Fietkau.

   3) Support adaptive interrupt moderation in ice, from Brett Creeley.

   4) A lot of struct_size conversions, from Gustavo A. R. Silva.

   5) Add peek/push/pop commands to bpftool, as well as bash completion,
      from Stanislav Fomichev.

   6) Optimize sk_msg_clone(), from Vakul Garg.

   7) Add SO_BINDTOIFINDEX, from David Herrmann.

   8) Be more conservative with local resends due to local congestion,
      from Yuchung Cheng.

   9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.

  10) Add health buffer support to devlink, from Eran Ben Elisha.

  11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.

  12) Add statistics to basic packet scheduler filter, from Cong Wang.

  13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.

  14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.

  15) Add 3ad stats to bonding, from Nikolay Aleksandrov.

  16) Lots of probing improvements for bpftool, from Quentin Monnet.

  17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.

  18) Allow #ebpf programs to access gso_segs from skb shared info, from
      Eric Dumazet.

  19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.

  20) Support 22260 iwlwifi devices, from Luca Coelho.

  21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.

  22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.

  23) Add spinlock support to #ebpf, from Alexei Starovoitov.

  24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.

  25) Add device infomation API to devlink, from Jakub Kicinski.

  26) Add new timestamping socket options which are y2038 safe, from
      Deepa Dinamani.

  27) Add RX checksum offloading for various sh_eth chips, from Sergei
      Shtylyov.

  28) Flow offload infrastructure, from Pablo Neira Ayuso.

  29) Numerous cleanups, improvements, and bug fixes to the PHY layer
      and many drivers from Heiner Kallweit.

  30) Lots of changes to try and make packet scheduler classifiers run
      lockless as much as possible, from Vlad Buslov.

  31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.

  32) Add concurrency tests to tc-tests infrastructure, from Vlad
      Buslov.

  33) Add hwmon support to aquantia, from Heiner Kallweit.

  34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.

  And I would be remiss if I didn't thank the various major networking
  subsystem maintainers for integrating much of this work before I even
  saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
  Johannes Berg, Kalle Valo, and many others. Thank you!"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
  net/sched: avoid unused-label warning
  net: ignore sysctl_devconf_inherit_init_net without SYSCTL
  phy: mdio-mux: fix Kconfig dependencies
  net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
  net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
  selftest/net: Remove duplicate header
  sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
  net/mlx5e: Update tx reporter status in case channels were successfully opened
  devlink: Add support for direct reporter health state update
  devlink: Update reporter state to error even if recover aborted
  sctp: call iov_iter_revert() after sending ABORT
  team: Free BPF filter when unregistering netdev
  ip6mr: Do not call __IP6_INC_STATS() from preemptible context
  isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
  net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
  cxgb4/chtls: Prefix adapter flags with CXGB4
  net-sysfs: Switch to bitmap_zalloc()
  mellanox: Switch to bitmap_zalloc()
  bpf: add test cases for non-pointer sanitiation logic
  mlxsw: i2c: Extend initialization by querying resources data
  ...

13 files changed, 514 insertions, 61 deletions

diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
index 37d67926dd6d..b1ad6ee68e90 100644
--- a/Documentation/devicetree/bindings/net/btusb.txt
+++ b/Documentation/devicetree/bindings/net/btusb.txt
@@ -9,6 +9,9 @@ Required properties:
 		 (more may be added later) are:
 
 		  "usb1286,204e" (Marvell 8997)
+		  "usbcf3,e300" (Qualcomm QCA6174A)
+		  "usb4ca,301a" (Qualcomm QCA6174A (Lite-On))
+
 
 Also, vendors that use btusb may have device additional properties, e.g:
 Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index 0f407fb371ce..e7db7268fd0f 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -7,6 +7,11 @@ Required properties:
   of the following:
   - "microchip,ksz9477"
   - "microchip,ksz9897"
+  - "microchip,ksz9896"
+  - "microchip,ksz9567"
+  - "microchip,ksz8565"
+  - "microchip,ksz9893"
+  - "microchip,ksz9563"
 
 Optional properties:
 
@@ -19,58 +24,96 @@ Examples:
 
 Ethernet switch connected via SPI to the host, CPU port wired to eth0:
 
-                             eth0: ethernet@10001000 {
-                                             fixed-link {
-                                                             speed = <1000>;
-                                                             full-duplex;
-                                             };
-                             };
+	eth0: ethernet@10001000 {
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+		};
+	};
 
-                             spi1: spi@f8008000 {
-                                             pinctrl-0 = <&pinctrl_spi_ksz>;
-                                             cs-gpios = <&pioC 25 0>;
-                                             id = <1>;
+	spi1: spi@f8008000 {
+		pinctrl-0 = <&pinctrl_spi_ksz>;
+		cs-gpios = <&pioC 25 0>;
+		id = <1>;
 
-                                             ksz9477: ksz9477@0 {
-                                                             compatible = "microchip,ksz9477";
-                                                             reg = <0>;
+		ksz9477: ksz9477@0 {
+			compatible = "microchip,ksz9477";
+			reg = <0>;
 
-                                                             spi-max-frequency = <44000000>;
-                                                             spi-cpha;
-                                                             spi-cpol;
+			spi-max-frequency = <44000000>;
+			spi-cpha;
+			spi-cpol;
 
-                                                             ports {
-                                                                             #address-cells = <1>;
-                                                                             #size-cells = <0>;
-                                                                             port@0 {
-                                                                                             reg = <0>;
-                                                                                             label = "lan1";
-                                                                             };
-                                                                             port@1 {
-                                                                                             reg = <1>;
-                                                                                             label = "lan2";
-                                                                             };
-                                                                             port@2 {
-                                                                                             reg = <2>;
-                                                                                             label = "lan3";
-                                                                             };
-                                                                             port@3 {
-                                                                                             reg = <3>;
-                                                                                             label = "lan4";
-                                                                             };
-                                                                             port@4 {
-                                                                                             reg = <4>;
-                                                                                             label = "lan5";
-                                                                             };
-                                                                             port@5 {
-                                                                                             reg = <5>;
-                                                                                             label = "cpu";
-                                                                                             ethernet = <&eth0>;
-                                                                                             fixed-link {
-                                                                                                             speed = <1000>;
-                                                                                                             full-duplex;
-                                                                                             };
-                                                                             };
-                                                             };
-                                             };
-                             };
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				port@4 {
+					reg = <4>;
+					label = "lan5";
+				};
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&eth0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+		ksz8565: ksz8565@0 {
+			compatible = "microchip,ksz8565";
+			reg = <0>;
+
+			spi-max-frequency = <44000000>;
+			spi-cpha;
+			spi-cpol;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&eth0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index aa3527f71fdc..47aa205ee0bd 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -3,12 +3,16 @@ Mediatek MT7530 Ethernet switch
 
 Required properties:
 
-- compatible: Must be compatible = "mediatek,mt7530";
+- compatible: may be compatible = "mediatek,mt7530"
+	or compatible = "mediatek,mt7621"
 - #address-cells: Must be 1.
 - #size-cells: Must be 0.
 - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
 	on multi-chip module belong to MT7623A has or the remotely standalone
 	chip as the function MT7623N reference board provided for.
+
+If compatible mediatek,mt7530 is set then the following properties are required
+
 - core-supply: Phandle to the regulator node necessary for the core power.
 - io-supply: Phandle to the regulator node necessary for the I/O power.
 	See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
new file mode 100644
index 000000000000..c812e25ae90f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
@@ -0,0 +1,69 @@
+* ENETC ethernet device tree bindings
+
+Depending on board design and ENETC port type (internal or
+external) there are two supported link modes specified by
+below device tree bindings.
+
+Required properties:
+
+- reg		: Specifies PCIe Device Number and Function
+		  Number of the ENETC endpoint device, according
+		  to parent node bindings.
+- compatible	: Should be "fsl,enetc".
+
+1) The ENETC external port is connected to a MDIO configurable phy:
+
+In this case, the ENETC node should include a "mdio" sub-node
+that in turn should contain the "ethernet-phy" node describing the
+external phy.  Below properties are required, their bindings
+already defined in ethernet.txt or phy.txt, under
+Documentation/devicetree/bindings/net/*.
+
+Required:
+
+- phy-handle		: Phandle to a PHY on the MDIO bus.
+			  Defined in ethernet.txt.
+
+- phy-connection-type	: Defined in ethernet.txt.
+
+- mdio			: "mdio" node, defined in mdio.txt.
+
+- ethernet-phy		: "ethernet-phy" node, defined in phy.txt.
+
+Example:
+
+	ethernet@0,0 {
+		compatible = "fsl,enetc";
+		reg = <0x000000 0 0 0 0>;
+		phy-handle = <&sgmii_phy0>;
+		phy-connection-type = "sgmii";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			sgmii_phy0: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+	};
+
+2) The ENETC port is an internal port or has a fixed-link external
+connection:
+
+In this case, the ENETC port node defines a fixed link connection,
+as specified by "fixed-link.txt", under
+Documentation/devicetree/bindings/net/*.
+
+Required:
+
+- fixed-link	: "fixed-link" node, defined in "fixed-link.txt".
+
+Example:
+	ethernet@0,2 {
+		compatible = "fsl,enetc";
+		reg = <0x000200 0 0 0 0>;
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 3e17ac1d5d58..174f292d8a3e 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -3,8 +3,8 @@
 Required properties:
 - compatible: Should be "cdns,[<chip>-]{macb|gem}"
   Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
-  Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
-  available on sama5d3 SoCs.
+  Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
+  Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC.
   Use "cdns,np4-macb" for NP4 SoC devices.
   Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
   Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index bedcfd5a52cd..691f886cfc4a 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -19,7 +19,7 @@ Optional properties:
   "marvell,armada-370-neta" and 9800B for others.
 - clock-names: List of names corresponding to clocks property; shall be
   "core" for core clock and "bus" for the optional bus clock.
-
+- phys: comphy for the ethernet port, see ../phy/phy-bindings.txt
 
 Optional properties (valid only for Armada XP/38x):
 
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt
new file mode 100644
index 000000000000..534e38058fe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt
@@ -0,0 +1,82 @@
+Properties for an MDIO bus multiplexer consumer device
+
+This is a special case of MDIO mux  when MDIO mux is defined as a consumer
+of a mux producer device. The mux producer can be of any type like mmio mux
+producer, gpio mux producer or generic register based mux producer.
+
+Required properties in addition to the MDIO Bus multiplexer properties:
+
+- compatible : should be "mmio-mux-multiplexer"
+- mux-controls : mux controller node to use for operating the mux
+- mdio-parent-bus : phandle to the parent MDIO bus.
+
+each child node of mdio bus multiplexer consumer device represent a mdio
+bus.
+
+for more information please refer
+Documentation/devicetree/bindings/mux/mux-controller.txt
+and Documentation/devicetree/bindings/net/mdio-mux.txt
+
+Example:
+In below example the Mux producer and consumer are separate nodes.
+
+&i2c0 {
+	fpga@66 { // fpga connected to i2c
+		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
+			     "simple-mfd";
+		reg = <0x66>;
+
+		mux: mux-controller { // Mux Producer
+			compatible = "reg-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+					<0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
+		};
+	};
+};
+
+mdio-mux-1 { // Mux consumer
+	compatible = "mdio-mux-multiplexer";
+	mux-controls = <&mux 0>;
+	mdio-parent-bus = <&emdio1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	mdio@0 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	mdio@8 {
+		reg = <0x8>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	..
+	..
+};
+
+mdio-mux-2 { // Mux consumer
+	compatible = "mdio-mux-multiplexer";
+	mux-controls = <&mux 1>;
+	mdio-parent-bus = <&emdio2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	mdio@0 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	mdio@1 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	..
+	..
+};
diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
index 14ceb2a5b4e8..41a7dcc80f5b 100644
--- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
@@ -33,3 +33,67 @@ Example:
 			clock-names = "ref";
 		};
 	};
+
+MediaTek UART based Bluetooth Devices
+==================================
+
+This device is a serial attached device to UART device and thus it must be a
+child node of the serial node with UART.
+
+Please refer to the following documents for generic properties:
+
+	Documentation/devicetree/bindings/serial/slave-device.txt
+
+Required properties:
+
+- compatible:	Must be
+		  "mediatek,mt7663u-bluetooth": for MT7663U device
+		  "mediatek,mt7668u-bluetooth": for MT7668U device
+- vcc-supply:	Main voltage regulator
+- pinctrl-names: Should be "default", "runtime"
+- pinctrl-0: Should contain UART RXD low when the device is powered up to
+	     enter proper bootstrap mode.
+- pinctrl-1: Should contain UART mode pin ctrl
+
+Optional properties:
+
+- reset-gpios:	GPIO used to reset the device whose initial state keeps low,
+		if the GPIO is missing, then board-level design should be
+		guaranteed.
+- current-speed:  Current baud rate of the device whose defaults to 921600
+
+Example:
+
+	uart1_pins_boot: uart1-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_81_URXD1_FUNC_GPIO81>;
+			output-low;
+		};
+	};
+
+	uart1_pins_runtime: uart1-runtime {
+		pins-dat {
+			pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+				 <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+		};
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>,
+			 <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
+
+		bluetooth {
+			compatible = "mediatek,mt7663u-bluetooth";
+			vcc-supply = <&reg_5v>;
+			reset-gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default", "runtime";
+			pinctrl-0 = <&uart1_pins_boot>;
+			pinctrl-1 = <&uart1_pins_runtime>;
+			current-speed = <921600>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt
index e55af7f0881a..85d7240a9b20 100644
--- a/Documentation/devicetree/bindings/net/nixge.txt
+++ b/Documentation/devicetree/bindings/net/nixge.txt
@@ -1,17 +1,53 @@
 * NI XGE Ethernet controller
 
 Required properties:
-- compatible: Should be "ni,xge-enet-2.00"
-- reg: Address and length of the register set for the device
+- compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for
+              older device trees with DMA engines co-located in the address map,
+              with the one reg entry to describe the whole device.
+- reg: Address and length of the register set for the device. It contains the
+       information of registers in the same order as described by reg-names.
+- reg-names: Should contain the reg names
+	"dma":  DMA engine control and status region
+        "ctrl": MDIO and PHY control and status region
 - interrupts: Should contain tx and rx interrupt
 - interrupt-names: Should be "rx" and "tx"
 - phy-mode: See ethernet.txt file in the same directory.
-- phy-handle: See ethernet.txt file in the same directory.
 - nvmem-cells: Phandle of nvmem cell containing the MAC address
 - nvmem-cell-names: Should be "address"
 
+Optional properties:
+- mdio subnode to indicate presence of MDIO controller
+- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
+  Use instead of phy-handle.
+- phy-handle: See ethernet.txt file in the same directory.
+
 Examples (10G generic PHY):
 	nixge0: ethernet@40000000 {
+		compatible = "ni,xge-enet-3.00";
+		reg = <0x40000000 0x4000
+		       0x41002000 0x2000>;
+		reg-names = "dma", "ctrl";
+
+		nvmem-cells = <&eth1_addr>;
+		nvmem-cell-names = "address";
+
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "rx", "tx";
+		interrupt-parent = <&intc>;
+
+		phy-mode = "xgmii";
+		phy-handle = <&ethernet_phy1>;
+
+		mdio {
+			ethernet_phy1: ethernet-phy@4 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <4>;
+			};
+		};
+	};
+
+Examples (10G generic PHY, no MDIO):
+	nixge0: ethernet@40000000 {
 		compatible = "ni,xge-enet-2.00";
 		reg = <0x40000000 0x6000>;
 
@@ -24,9 +60,33 @@ Examples (10G generic PHY):
 
 		phy-mode = "xgmii";
 		phy-handle = <&ethernet_phy1>;
+	};
+
+Examples (1G generic fixed-link + MDIO):
+	nixge0: ethernet@40000000 {
+		compatible = "ni,xge-enet-2.00";
+		reg = <0x40000000 0x6000>;
 
-		ethernet_phy1: ethernet-phy@4 {
-			compatible = "ethernet-phy-ieee802.3-c45";
-			reg = <4>;
+		nvmem-cells = <&eth1_addr>;
+		nvmem-cell-names = "address";
+
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "rx", "tx";
+		interrupt-parent = <&intc>;
+
+		phy-mode = "xgmii";
+
+		fixed-link {
+			speed = <1000>;
+			pause;
+			link-gpios = <&gpio0 63 GPIO_ACTIVE_HIGH>;
+		};
+
+		mdio {
+			ethernet_phy1: ethernet-phy@4 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <4>;
+			};
 		};
+
 	};
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
new file mode 100644
index 000000000000..fcf5035810b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
@@ -0,0 +1,64 @@
+Qualcomm Ethernet ETHQOS device
+
+This documents dwmmac based ethernet device which supports Gigabit
+ethernet for version v2.3.0 onwards.
+
+This device has following properties:
+
+Required properties:
+
+- compatible: Should be qcom,qcs404-ethqos"
+
+- reg: Address and length of the register set for the device
+
+- reg-names: Should contain register names "stmmaceth", "rgmii"
+
+- clocks: Should contain phandle to clocks
+
+- clock-names: Should contain clock names "stmmaceth", "pclk",
+		"ptp_ref", "rgmii"
+
+- interrupts: Should contain phandle to interrupts
+
+- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
+
+Rest of the properties are defined in stmmac.txt file in same directory
+
+
+Example:
+
+ethernet: ethernet@7a80000 {
+	compatible = "qcom,qcs404-ethqos";
+	reg = <0x07a80000 0x10000>,
+		<0x07a96000 0x100>;
+	reg-names = "stmmaceth", "rgmii";
+	clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+	clocks = <&gcc GCC_ETH_AXI_CLK>,
+		<&gcc GCC_ETH_SLAVE_AHB_CLK>,
+		<&gcc GCC_ETH_PTP_CLK>,
+		<&gcc GCC_ETH_RGMII_CLK>;
+	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "macirq", "eth_lpi";
+	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+
+	snps,txpbl = <8>;
+	snps,rxpbl = <2>;
+	snps,aal;
+	snps,tso;
+
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+
+	mdio {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: phy@4 {
+			device_type = "ethernet-phy";
+			reg = <0x4>;
+		};
+	};
+
+};
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
index 0c17a0ec9b7b..7b9a776230c0 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
@@ -4,6 +4,13 @@ This node provides properties for configuring the MediaTek mt76xx wireless
 device. The node is expected to be specified as a child node of the PCI
 controller to which the wireless chip is connected.
 
+Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC.
+For SoC, use the compatible string "mediatek,mt7628-wmac" and the following
+properties:
+
+- reg: Address and length of the register set for the device.
+- interrupts: Main device interrupt
+
 Optional properties:
 
 - mac-address: See ethernet.txt in the parent directory
@@ -30,3 +37,15 @@ Optional nodes:
 		};
 	};
 };
+
+MT7628 example:
+
+wmac: wmac@10300000 {
+	compatible = "mediatek,mt7628-wmac";
+	reg = <0x10300000 0x100000>;
+
+	interrupt-parent = <&cpuintc>;
+	interrupts = <6>;
+
+	mediatek,mtd-eeprom = <&factory 0x0000>;
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
new file mode 100644
index 000000000000..ad49e5c01334
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
@@ -0,0 +1,40 @@
+mvebu armada 38x comphy driver
+------------------------------
+
+This comphy controller can be found on Marvell Armada 38x. It provides a
+number of shared PHYs used by various interfaces (network, sata, usb,
+PCIe...).
+
+Required properties:
+
+- compatible: should be "marvell,armada-380-comphy"
+- reg: should contain the comphy register location and length.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+A sub-node is required for each comphy lane provided by the comphy.
+
+Required properties (child nodes):
+
+- reg: comphy lane number.
+- #phy-cells : from the generic phy bindings, must be 1. Defines the
+               input port to use for a given comphy lane.
+
+Example:
+
+	comphy: phy@18300 {
+		compatible = "marvell,armada-380-comphy";
+		reg = <0x18300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpm_comphy0: phy@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+
+		cpm_comphy1: phy@1 {
+			reg = <1>;
+			#phy-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
index c5d0e7998e2b..454c937076a2 100644
--- a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
+++ b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
@@ -17,6 +17,11 @@ Clock Properties:
   - fsl,tmr-fiper1   Fixed interval period pulse generator.
   - fsl,tmr-fiper2   Fixed interval period pulse generator.
   - fsl,max-adj      Maximum frequency adjustment in parts per billion.
+  - fsl,extts-fifo   The presence of this property indicates hardware
+		     support for the external trigger stamp FIFO.
+  - little-endian    The presence of this property indicates the 1588 timer
+		     IP block is little-endian mode. The default endian mode
+		     is big-endian.
 
   These properties set the operational parameters for the PTP
   clock. You must choose these carefully for the clock to work right.