Merge drm-upstream/drm-next into drm-misc-next

We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>

14 files changed, 72 insertions, 21 deletions

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index f4006d3c9fdf..c760ecb81381 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -30,7 +30,6 @@ compatible:
 Optional properties:
 - dma-coherent      : Present if dma operations are coherent
 - clocks            : a list of phandle + clock specifier pairs
-- resets            : a list of phandle + reset specifier pairs
 - target-supply     : regulator for SATA target power
 - phys              : reference to the SATA PHY node
 - phy-names         : must be "sata-phy"
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
index 3a72a103a18a..a41d280c3f9f 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
@@ -14,6 +14,7 @@ Required properties:
 - compatible : Shall contain one or more of
   - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
   - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX
+  - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX
   - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX
 
     When compatible with generic versions, nodes must list the SoC-specific
diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
index 24cc2466185a..1a4eaca40d94 100644
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
@@ -27,6 +27,9 @@ Optional properties:
 	in question is used. The implementation allows one or two DAIs. If two
 	DAIs are defined, they must be of different type.
 
+  - nxp,calib-gpios: calibration GPIO, which must correspond with the
+	gpio used for the TDA998x interrupt pin.
+
 [1] Documentation/sound/alsa/soc/DAI.txt
 [2] include/dt-bindings/display/tda998x.h
 
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
index fc2588292a68..775193e1c641 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
@@ -19,7 +19,8 @@ Required properties:
 	  clock-names property.
 - clock-names: list of clock names sorted in the same order as the clocks
 	       property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x",
-	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
+	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x",
+	       "aclk_xiu_decon1x", "pclk_smmu_decon1x", clk_decon_vclk",
 	       "sclk_decon_eclk"
 - ports: contains a port which is connected to mic node. address-cells and
 	 size-cells must 1 and 0, respectively.
@@ -34,10 +35,14 @@ decon: decon@13800000 {
 	clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
 		<&cmu_disp CLK_ACLK_XIU_DECON0X>,
 		<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+		<&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+		<&cmu_disp CLK_ACLK_XIU_DECON1X>,
+		<&cmu_disp CLK_PCLK_SMMU_DECON1X>,
 		<&cmu_disp CLK_SCLK_DECON_VCLK>,
 		<&cmu_disp CLK_SCLK_DECON_ECLK>;
 	clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
-		"pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk";
+		"pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x",
+		"pclk_smmu_decon1x", "sclk_decon_vclk", "sclk_decon_eclk";
 	interrupt-names = "vsync", "lcd_sys";
 	interrupts = <0 202 0>, <0 203 0>;
 
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt
index 557fa765adcb..5d2519af4bb5 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.txt
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.txt
@@ -38,7 +38,7 @@ Display Timings
   require specific display timings. The panel-timing subnode expresses those
   timings as specified in the timing subnode section of the display timing
   bindings defined in
-  Documentation/devicetree/bindings/display/display-timing.txt.
+  Documentation/devicetree/bindings/display/panel/display-timing.txt.
 
 
 Connectivity
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index c9cd17f99702..7c6854bd0a04 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -13,6 +13,7 @@ Required Properties:
     - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
     - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
     - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
+    - "renesas,du-r8a77965" for R8A77965 (R-Car M3-N) compatible DU
     - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
     - "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU
 
@@ -47,20 +48,21 @@ bindings specified in Documentation/devicetree/bindings/graph.txt.
 The following table lists for each supported model the port number
 corresponding to each DU output.
 
-                      Port0          Port1          Port2          Port3
+                        Port0          Port1          Port2          Port3
 -----------------------------------------------------------------------------
- R8A7743 (RZ/G1M)     DPAD 0         LVDS 0         -              -
- R8A7745 (RZ/G1E)     DPAD 0         DPAD 1         -              -
- R8A7779 (R-Car H1)   DPAD 0         DPAD 1         -              -
- R8A7790 (R-Car H2)   DPAD 0         LVDS 0         LVDS 1         -
- R8A7791 (R-Car M2-W) DPAD 0         LVDS 0         -              -
- R8A7792 (R-Car V2H)  DPAD 0         DPAD 1         -              -
- R8A7793 (R-Car M2-N) DPAD 0         LVDS 0         -              -
- R8A7794 (R-Car E2)   DPAD 0         DPAD 1         -              -
- R8A7795 (R-Car H3)   DPAD 0         HDMI 0         HDMI 1         LVDS 0
- R8A7796 (R-Car M3-W) DPAD 0         HDMI 0         LVDS 0         -
- R8A77970 (R-Car V3M) DPAD 0         LVDS 0         -              -
- R8A77995 (R-Car D3)  DPAD 0         LVDS 0         LVDS 1         -
+ R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
+ R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
+ R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
+ R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
+ R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -
+ R8A7792 (R-Car V2H)    DPAD 0         DPAD 1         -              -
+ R8A7793 (R-Car M2-N)   DPAD 0         LVDS 0         -              -
+ R8A7794 (R-Car E2)     DPAD 0         DPAD 1         -              -
+ R8A7795 (R-Car H3)     DPAD 0         HDMI 0         HDMI 1         LVDS 0
+ R8A7796 (R-Car M3-W)   DPAD 0         HDMI 0         LVDS 0         -
+ R8A77965 (R-Car M3-N)  DPAD 0         HDMI 0         LVDS 0         -
+ R8A77970 (R-Car V3M)   DPAD 0         LVDS 0         -              -
+ R8A77995 (R-Car D3)    DPAD 0         LVDS 0         LVDS 1         -
 
 
 Example: R8A7795 (R-Car H3) ES2.0 DU
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
index aadfb236d53a..61315eaa7660 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -26,6 +26,7 @@ Required Properties:
 		- "renesas,dmac-r8a7794" (R-Car E2)
 		- "renesas,dmac-r8a7795" (R-Car H3)
 		- "renesas,dmac-r8a7796" (R-Car M3-W)
+		- "renesas,dmac-r8a77965" (R-Car M3-N)
 		- "renesas,dmac-r8a77970" (R-Car V3M)
 		- "renesas,dmac-r8a77980" (R-Car V3H)
 
diff --git a/Documentation/devicetree/bindings/gpu/samsung-scaler.txt b/Documentation/devicetree/bindings/gpu/samsung-scaler.txt
new file mode 100644
index 000000000000..9c3d98105dfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/samsung-scaler.txt
@@ -0,0 +1,27 @@
+* Samsung Exynos Image Scaler
+
+Required properties:
+  - compatible : value should be one of the following:
+	(a) "samsung,exynos5420-scaler" for Scaler IP in Exynos5420
+	(b) "samsung,exynos5433-scaler" for Scaler IP in Exynos5433
+
+  - reg : Physical base address of the IP registers and length of memory
+	  mapped region.
+
+  - interrupts : Interrupt specifier for scaler interrupt, according to format
+		 specific to interrupt parent.
+
+  - clocks : Clock specifier for scaler clock, according to generic clock
+	     bindings. (See Documentation/devicetree/bindings/clock/exynos*.txt)
+
+  - clock-names : Names of clocks. For exynos scaler, it should be "mscl"
+		  on 5420 and "pclk", "aclk" and "aclk_xiu" on 5433.
+
+Example:
+	scaler@12800000 {
+		compatible = "samsung,exynos5420-scaler";
+		reg = <0x12800000 0x1294>;
+		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clock CLK_MSCL0>;
+		clock-names = "mscl";
+	};
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index 23e3abc3fdef..c88919480d37 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -4,6 +4,13 @@ Required properties:
 - compatible:
     atmel,maxtouch
 
+    The following compatibles have been used in various products but are
+    deprecated:
+	atmel,qt602240_ts
+	atmel,atmel_mxt_ts
+	atmel,atmel_mxt_tp
+	atmel,mXT224
+
 - reg: The I2C address of the device
 
 - interrupts: The sink for the touchpad's IRQ output
diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
index 93c3a6ae32f9..ac71daa46195 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
@@ -5,7 +5,9 @@ Required properties:
 - compatible: Must contain one or more of the following:
   - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
   - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
-  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3) compatible controller.
+  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
+  - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
+  - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
 
   When compatible with the generic version, nodes must list the
   SoC-specific version corresponding to the platform first, followed by the
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index c306f55d335b..890526dbfc26 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -18,6 +18,7 @@ Required properties:
 
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
+      - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
       - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
       - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
       - "renesas,etheravb-r8a77995" for the R8A77995 SoC.
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index ed5eb547afc8..64bc5c2a76da 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -56,9 +56,9 @@ pins it needs, and how they should be configured, with regard to muxer
 configuration, drive strength and pullups. If one of these options is
 not set, its actual value will be unspecified.
 
-This driver supports the generic pin multiplexing and configuration
-bindings. For details on each properties, you can refer to
-./pinctrl-bindings.txt.
+Allwinner A1X Pin Controller supports the generic pin multiplexing and
+configuration bindings. For details on each properties, you can refer to
+ ./pinctrl-bindings.txt.
 
 Required sub-node properties:
   - pins
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index a006ea4d065f..106808b55b6d 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -43,6 +43,8 @@ Required properties:
     - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
     - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
     - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+    - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
+    - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
     - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
     - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
     - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index b5f978a4cac6..a38d8bfae19c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -182,6 +182,7 @@ karo	Ka-Ro electronics GmbH
 keithkoep	Keith & Koep GmbH
 keymile	Keymile GmbH
 khadas	Khadas
+kiebackpeter    Kieback & Peter GmbH
 kinetic Kinetic Technologies
 kingnovel	Kingnovel Technology Co., Ltd.
 kosagi	Sutajio Ko-Usagi PTE Ltd.