diff options
| author |   Olliver Schinagl <oliver@schinagl.nl> | 2018-12-11 17:17:07 +0200 |
|---|---|---|
| committer |   Mark Brown <broonie@kernel.org> | 2018-12-13 16:39:54 +0000 |
| commit | fdb0436c35b86759da6d7fce27323e3cdced0e13 (patch) | |
| tree | b3bca3929b2eda0ed56da40374e934bf8144d342 /Documentation/devicetree/bindings | |
| parent | regulator: axp20x: add support for set_ramp_delay for AXP209 (diff) | |
| download | linux-dev-fdb0436c35b86759da6d7fce27323e3cdced0e13.tar.xz linux-dev-fdb0436c35b86759da6d7fce27323e3cdced0e13.zip | |
dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209
The AXP209 supports ramping up voltages on several regulators such as
DCDC2 and LDO3, therefore we can use the standard 'regulator-ramp-delay'
property for those 2 regulators.
Note that the voltage ramp only works when the regulator is already
enabled. E.g. when going from say 0.7 V to 3.6 V.
When turning on the regulator, no voltage ramp is performed in hardware.
What this means, is that if the bootloader brings up the voltage at 0.7 V,
the ramp delay property is properly applied. If however, the bootloader
leaves the power off, no ramp delay is applied when the power is
enabled by the regulator framework.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Priit Laes <plaes@plaes.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/axp20x.txt | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 188f0373d441..c6266052d23f 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -32,6 +32,12 @@ Required properties: - interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 +Supported common regulator properties, see ../regulator/regulator.txt for +more information: +- regulator-ramp-delay: sets the ramp up delay in uV/us + AXP20x/DCDC2: 1600, 800 + AXP20x/LDO3: 1600, 800 + Optional properties: - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz AXP152/20X: range: 750-1875, Default: 1.5 MHz |