Merge tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver updates from Greg KH:
 "Here is the big Staging and IIO driver update for 4.8-rc1.

  We ended up adding more code than removing, again, but it's not all
  that bad.  Lots of cleanups all over the staging tree, and new IIO
  drivers, full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (417 commits)
  drivers:iio:accel:mma8452: removed unwanted return statements
  drivers:iio:accel:mma8452: added cleanup provision in case of failure.
  iio: Add iio.git tree to MAINTAINERS
  iio:st_pressure: clean useless static channel initializers
  iio:st_pressure:lps22hb: temperature support
  iio:st_pressure:lps22hb: open drain support
  iio:st_pressure: temperature triggered buffering
  iio:st_pressure: document sampling gains
  iio:st_pressure: align storagebits on power of 2
  iio:st_sensors: align on storagebits boundaries
  staging:iio:lis3l02dq drop separate driver
  iio: accel: st_accel: Add lis3l02dq support
  iio: adc: add missing of_node references to iio_dev
  iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
  iio: potentiometer: Fix typo in Kconfig
  iio: potentiometer: mcp4531: Add device tree binding
  iio: potentiometer: mcp4531: Add device tree binding documentation
  iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
  iio:imu:mpu6050: icm20608 initial support
  iio: adc: max1363: Add device tree binding
  ...

7 files changed, 328 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 539874490492..acc5cd64711c 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,6 +56,70 @@ maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
 maxim,max1237		Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
 maxim,max6625		9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
 mc,rv3029c2		Real Time Clock Module with I2C-Bus
+microchip,mcp4531-502	Microchip 7-bit Single I2C Digital Potentiometer (5k)
+microchip,mcp4531-103	Microchip 7-bit Single I2C Digital Potentiometer (10k)
+microchip,mcp4531-503	Microchip 7-bit Single I2C Digital Potentiometer (50k)
+microchip,mcp4531-104	Microchip 7-bit Single I2C Digital Potentiometer (100k)
+microchip,mcp4532-502	Microchip 7-bit Single I2C Digital Potentiometer (5k)
+microchip,mcp4532-103	Microchip 7-bit Single I2C Digital Potentiometer (10k)
+microchip,mcp4532-503	Microchip 7-bit Single I2C Digital Potentiometer (50k)
+microchip,mcp4532-104	Microchip 7-bit Single I2C Digital Potentiometer (100k)
+microchip,mcp4541-502	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4541-103	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4541-503	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4541-104	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4542-502	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4542-103	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4542-503	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4542-104	Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4551-502	Microchip 8-bit Single I2C Digital Potentiometer (5k)
+microchip,mcp4551-103	Microchip 8-bit Single I2C Digital Potentiometer (10k)
+microchip,mcp4551-503	Microchip 8-bit Single I2C Digital Potentiometer (50k)
+microchip,mcp4551-104	Microchip 8-bit Single I2C Digital Potentiometer (100k)
+microchip,mcp4552-502	Microchip 8-bit Single I2C Digital Potentiometer (5k)
+microchip,mcp4552-103	Microchip 8-bit Single I2C Digital Potentiometer (10k)
+microchip,mcp4552-503	Microchip 8-bit Single I2C Digital Potentiometer (50k)
+microchip,mcp4552-104	Microchip 8-bit Single I2C Digital Potentiometer (100k)
+microchip,mcp4561-502	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4561-103	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4561-503	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4561-104	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4562-502	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4562-103	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4562-503	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4562-104	Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4631-502	Microchip 7-bit Dual I2C Digital Potentiometer (5k)
+microchip,mcp4631-103	Microchip 7-bit Dual I2C Digital Potentiometer (10k)
+microchip,mcp4631-503	Microchip 7-bit Dual I2C Digital Potentiometer (50k)
+microchip,mcp4631-104	Microchip 7-bit Dual I2C Digital Potentiometer (100k)
+microchip,mcp4632-502	Microchip 7-bit Dual I2C Digital Potentiometer (5k)
+microchip,mcp4632-103	Microchip 7-bit Dual I2C Digital Potentiometer (10k)
+microchip,mcp4632-503	Microchip 7-bit Dual I2C Digital Potentiometer (50k)
+microchip,mcp4632-104	Microchip 7-bit Dual I2C Digital Potentiometer (100k)
+microchip,mcp4641-502	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4641-103	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4641-503	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4641-104	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4642-502	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4642-103	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4642-503	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4642-104	Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4651-502	Microchip 8-bit Dual I2C Digital Potentiometer (5k)
+microchip,mcp4651-103	Microchip 8-bit Dual I2C Digital Potentiometer (10k)
+microchip,mcp4651-503	Microchip 8-bit Dual I2C Digital Potentiometer (50k)
+microchip,mcp4651-104	Microchip 8-bit Dual I2C Digital Potentiometer (100k)
+microchip,mcp4652-502	Microchip 8-bit Dual I2C Digital Potentiometer (5k)
+microchip,mcp4652-103	Microchip 8-bit Dual I2C Digital Potentiometer (10k)
+microchip,mcp4652-503	Microchip 8-bit Dual I2C Digital Potentiometer (50k)
+microchip,mcp4652-104	Microchip 8-bit Dual I2C Digital Potentiometer (100k)
+microchip,mcp4661-502	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4661-103	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4661-503	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4661-104	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k)
+microchip,mcp4662-502	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k)
+microchip,mcp4662-103	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k)
+microchip,mcp4662-503	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k)
+microchip,mcp4662-104	Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k)
 national,lm63		Temperature sensor with integrated fan control
 national,lm75		I2C TEMP SENSOR
 national,lm80		Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
new file mode 100644
index 000000000000..caaaed765ce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
@@ -0,0 +1,41 @@
+* Broadcom's IPROC Static ADC controller
+
+Broadcom iProc ADC controller has 8 channels 10bit ADC.
+Allows user to convert analog input voltage values to digital.
+
+Required properties:
+
+- compatible: Must be "brcm,iproc-static-adc"
+
+- adc-syscon: Handler of syscon node defining physical base address of the
+  controller and length of memory mapped region.
+
+- #io-channel-cells = <1>; As ADC has multiple outputs
+  refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+- io-channel-ranges:
+  refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+- clocks: Clock used for this block.
+
+- clock-names: Clock name should be given as tsc_clk.
+
+- interrupts: interrupt line number.
+
+For example:
+
+	ts_adc_syscon: ts_adc_syscon@180a6000 {
+		compatible = "brcm,iproc-ts-adc-syscon","syscon";
+		reg = <0x180a6000 0xc30>;
+	};
+
+	adc: adc@180a6000 {
+		compatible = "brcm,iproc-static-adc";
+		adc-syscon = <&ts_adc_syscon>;
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+		clock-names = "tsc_clk";
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/iio/adc/max1363.txt b/Documentation/devicetree/bindings/iio/adc/max1363.txt
new file mode 100644
index 000000000000..94a9011dd860
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/max1363.txt
@@ -0,0 +1,63 @@
+* Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC)
+
+The node for this driver must be a child node of a I2C controller, hence
+all mandatory properties for your controller must be specified. See directory:
+
+        Documentation/devicetree/bindings/i2c
+
+for more details.
+
+Required properties:
+  - compatible: Should be one of
+		"maxim,max1361"
+		"maxim,max1362"
+		"maxim,max1363"
+		"maxim,max1364"
+		"maxim,max1036"
+		"maxim,max1037"
+		"maxim,max1038"
+		"maxim,max1039"
+		"maxim,max1136"
+		"maxim,max1137"
+		"maxim,max1138"
+		"maxim,max1139"
+		"maxim,max1236"
+		"maxim,max1237"
+		"maxim,max1238"
+		"maxim,max1239"
+		"maxim,max11600"
+		"maxim,max11601"
+		"maxim,max11602"
+		"maxim,max11603"
+		"maxim,max11604"
+		"maxim,max11605"
+		"maxim,max11606"
+		"maxim,max11607"
+		"maxim,max11608"
+		"maxim,max11609"
+		"maxim,max11610"
+		"maxim,max11611"
+		"maxim,max11612"
+		"maxim,max11613"
+		"maxim,max11614"
+		"maxim,max11615"
+		"maxim,max11616"
+		"maxim,max11617"
+		"maxim,max11644"
+		"maxim,max11645"
+		"maxim,max11646"
+		"maxim,max11647"
+  - reg: Should contain the ADC I2C address
+
+Optional properties:
+  - vcc-supply: phandle to the regulator that provides power to the ADC.
+  - vref-supply: phandle to the regulator for ADC reference voltage.
+  - interrupts: IRQ line for the ADC. If not used the driver will use
+    polling.
+
+Example:
+adc: max11644@36 {
+	compatible = "maxim,max11644";
+	reg = <0x36>;
+	vref-supply = <&adc_vref>;
+};
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt
new file mode 100644
index 000000000000..2962bd9a2b3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt
@@ -0,0 +1,22 @@
+* Atlas Scientific EC-SM OEM sensor
+
+http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf
+
+Required properties:
+
+  - compatible: must be "atlas,ec-sm"
+  - reg: the I2C address of the sensor
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic interrupt client
+  node bindings.
+
+Example:
+
+atlas@64 {
+	compatible = "atlas,ec-sm";
+	reg = <0x64>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 2>;
+};
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
new file mode 100644
index 000000000000..f0bbd7e1029b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
@@ -0,0 +1,124 @@
+* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
+
+Required properties:
+ - compatible: Has to contain one of the following:
+	adi,ad5755
+	adi,ad5755-1
+	adi,ad5757
+	adi,ad5735
+	adi,ad5737
+
+ - reg: spi chip select number for the device
+ - spi-cpha or spi-cpol: is the only modes that is supported
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+See include/dt-bindings/iio/ad5755.h
+ - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
+					 external resistor and thereby bypasses
+					 the internal compensation resistor.
+ - adi,dc-dc-phase:
+	Valid values for DC DC Phase control is:
+	0: All dc-to-dc converters clock on the same edge.
+	1: Channel A and Channel B clock on the same edge,
+	   Channel C and Channel D clock on opposite edges.
+	2: Channel A and Channel C clock on the same edge,
+	   Channel B and Channel D clock on opposite edges.
+	3: Channel A, Channel B, Channel C, and Channel D
+	   clock 90 degrees out of phase from each other.
+ - adi,dc-dc-freq-hz:
+	Valid values for DC DC frequency is [Hz]:
+	250000
+	410000
+	650000
+ - adi,dc-dc-max-microvolt:
+	Valid values for the maximum allowed Vboost voltage supplied by
+	the dc-to-dc converter is:
+	23000000
+	24500000
+	27000000
+	29500000
+
+Optional for every channel:
+ - adi,mode:
+	Valid values for DAC modes is:
+	0: 0 V to 5 V voltage range.
+	1: 0 V to 10 V voltage range.
+	2: Plus minus 5 V voltage range.
+	3: Plus minus 10 V voltage range.
+	4: 4 mA to 20 mA current range.
+	5: 0 mA to 20 mA current range.
+	6: 0 mA to 24 mA current range.
+ - adi,ext-current-sense-resistor: boolean set if the hardware a external
+				   current sense resistor.
+ - adi,enable-voltage-overrange: boolean enable voltage overrange
+ - adi,slew: Array of slewrate settings should contain 3 fields:
+	1: Should be either 0 or 1 in order to enable or disable slewrate.
+	2: Slew rate settings:
+		Valid values for the slew rate update frequency:
+		64000
+		32000
+		16000
+		8000
+		4000
+		2000
+		1000
+		500
+		250
+		125
+		64
+		32
+		16
+		8
+		4
+		0
+	3: Slew step size:
+		Valid values for the step size LSBs:
+		1
+		2
+		4
+		16
+		32
+		64
+		128
+		256
+
+Example:
+dac@0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "adi,ad5755";
+	reg = <0>;
+	spi-max-frequency = <1000000>;
+	spi-cpha;
+	adi,dc-dc-phase = <0>;
+	adi,dc-dc-freq-hz = <410000>;
+	adi,dc-dc-max-microvolt = <23000000>;
+	channel@0 {
+		reg = <0>;
+		adi,mode = <4>;
+		adi,ext-current-sense-resistor;
+		adi,slew = <0 64000 1>;
+	};
+	channel@1 {
+		reg = <1>;
+		adi,mode = <4>;
+		adi,ext-current-sense-resistor;
+		adi,slew = <0 64000 1>;
+	};
+	channel@2 {
+		reg = <2>;
+		adi,mode = <4>;
+		adi,ext-current-sense-resistor;
+		adi,slew = <0 64000 1>;
+	};
+	channel@3 {
+		reg = <3>;
+		adi,mode = <4>;
+		adi,ext-current-sense-resistor;
+		adi,slew = <0 64000 1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
index d7a6deb6b21e..c7198a03c906 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
@@ -1,7 +1,11 @@
-BMP085/BMP18x digital pressure sensors
+BMP085/BMP18x/BMP28x digital pressure sensors
 
 Required properties:
-- compatible: bosch,bmp085
+- compatible: must be one of:
+  "bosch,bmp085"
+  "bosch,bmp180"
+  "bosch,bmp280"
+  "bosch,bme280"
 
 Optional properties:
 - chip-id: configurable chip id for non-default chip revisions
@@ -10,6 +14,10 @@ Optional properties:
   value range is 0-3 with rising sensitivity.
 - interrupt-parent: should be the phandle for the interrupt controller
 - interrupts: interrupt mapping for IRQ
+- reset-gpios: a GPIO line handling reset of the sensor: as the line is
+  active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
+- vddd-supply: digital voltage regulator (see regulator/regulator.txt)
+- vdda-supply: analog voltage regulator (see regulator/regulator.txt)
 
 Example:
 
@@ -21,4 +29,7 @@ pressure@77 {
 	default-oversampling = <2>;
 	interrupt-parent = <&gpio0>;
 	interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+	reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	vddd-supply = <&foo>;
+	vdda-supply = <&bar>;
 };
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index 5844cf72862d..e41fe340162b 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -64,3 +64,4 @@ Pressure sensors:
 - st,lps001wp-press
 - st,lps25h-press
 - st,lps331ap-press
+- st,lps22hb-press