Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc: soc specific changes (part 2) from Olof Johansson:
 "This adds support for the spear13xx platform, which has first been
  under review a long time ago and finally been completed after generic
  spear work has gone into the clock, dt and pinctrl branches.

  Also a number of updates for the samsung socs are part of this branch."

Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much
worse than they are: the exonys5 init code was refactored in commit
fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and
then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a
new gpio chip define and did tiny updates to the init code.

So the conflict diff looks like hell, but it's actually a fairly simple
change.

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: fix building with CONFIG_OF disabled
  ARM: EXYNOS: Add AUXDATA for i2c controllers
  ARM: dts: Update device tree source files for EXYNOS5250
  ARM: EXYNOS: Add device tree support for interrupt combiner
  ARM: EXYNOS: Add irq_domain support for interrupt combiner
  ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
  ARM: EXYNOS: update irqs for EXYNOS5250 SoC
  ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
  ARM: EXYNOS: add GPC4 bank instance
  ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
  ARM: EXYNOS: Modify the GIC physical address for static io-mapping
  ARM: EXYNOS: Add watchdog timer clock instance
  pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
  SPEAr: Update MAINTAINERS and Documentation
  SPEAr13xx: Add defconfig
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add dts and dtsi files
  pinctrl: Add SPEAr13xx pinctrl drivers
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  SPEAr13xx: Add common clock framework support
  ...

3 files changed, 106 insertions, 7 deletions

diff --git a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt
new file mode 100644
index 000000000000..f2f2171e530e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt
@@ -0,0 +1,52 @@
+* Samsung Exynos Interrupt Combiner Controller
+
+Samsung's Exynos4 architecture includes a interrupt combiner controller which
+can combine interrupt sources as a group and provide a single interrupt request
+for the group. The interrupt request from each group are connected to a parent
+interrupt controller, such as GIC in case of Exynos4210.
+
+The interrupt combiner controller consists of multiple combiners. Upto eight
+interrupt sources can be connected to a combiner. The combiner outputs one
+combined interrupt for its eight interrupt sources. The combined interrupt
+is usually connected to a parent interrupt controller.
+
+A single node in the device tree is used to describe the interrupt combiner
+controller module (which includes multiple combiners). A combiner in the
+interrupt controller module shares config/control registers with other
+combiners. For example, a 32-bit interrupt enable/disable config register
+can accommodate upto 4 interrupt combiners (with each combiner supporting
+upto 8 interrupt sources).
+
+Required properties:
+- compatible: should be "samsung,exynos4210-combiner".
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: should be <2>. The meaning of the cells are
+	* First Cell: Combiner Group Number.
+	* Second Cell: Interrupt number within the group.
+- reg: Base address and size of interrupt combiner registers.
+- interrupts: The list of interrupts generated by the combiners which are then
+    connected to a parent interrupt controller. The format of the interrupt
+    specifier depends in the interrupt parent controller.
+
+Optional properties:
+- samsung,combiner-nr: The number of interrupt combiners supported. If this
+  property is not specified, the default number of combiners is assumed
+  to be 16.
+- interrupt-parent: pHandle of the parent interrupt controller, if not
+  inherited from the parent node.
+
+
+Example:
+
+	The following is a an example from the Exynos4210 SoC dtsi file.
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <0x10440000 0x1000>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt
index aa5f355cc947..0d42949df6c2 100644
--- a/Documentation/devicetree/bindings/arm/spear.txt
+++ b/Documentation/devicetree/bindings/arm/spear.txt
@@ -2,25 +2,25 @@ ST SPEAr Platforms Device Tree Bindings
 ---------------------------------------
 
 Boards with the ST SPEAr600 SoC shall have the following properties:
-
 Required root node property:
-
 compatible = "st,spear600";
 
 Boards with the ST SPEAr300 SoC shall have the following properties:
-
 Required root node property:
-
 compatible = "st,spear300";
 
 Boards with the ST SPEAr310 SoC shall have the following properties:
-
 Required root node property:
-
 compatible = "st,spear310";
 
 Boards with the ST SPEAr320 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear320";
 
+Boards with the ST SPEAr1310 SoC shall have the following properties:
 Required root node property:
+compatible = "st,spear1310";
 
-compatible = "st,spear320";
+Boards with the ST SPEAr1340 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear1340";
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
index 3664d37e6799..b4480d5c3aca 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
@@ -4,6 +4,8 @@ Required properties:
 - compatible	: "st,spear300-pinmux"
 		: "st,spear310-pinmux"
 		: "st,spear320-pinmux"
+		: "st,spear1310-pinmux"
+		: "st,spear1340-pinmux"
 - reg		: Address range of the pinctrl registers
 - st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
 	- Its values for SPEAr300:
@@ -89,6 +91,37 @@ For SPEAr320 machines:
 	"rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
 	"i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
 
+For SPEAr1310 machines:
+	"i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp",
+	"i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp",
+	"smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp",
+	"smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp",
+	"nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp",
+	"keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp",
+	"gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp",
+	"sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp",
+	"uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp",
+	"uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp",
+	"i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp",
+	"i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp",
+	"i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp",
+	"can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp",
+	"pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp",
+	"ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp"
+
+For SPEAr1340 machines:
+	"pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp",
+	"keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp",
+	"spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp",
+	"pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp",
+	"vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp",
+	"cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp",
+	"ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp",
+	"uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp",
+	"rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp",
+	"sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp",
+	"miphy_dbg_grp", "pcie_grp", "sata_grp"
+
 Valid values for function names are:
 For All SPEAr3xx machines:
 	"firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
@@ -106,3 +139,17 @@ For SPEAr320 machines:
 	"uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
 	"can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
 	"mii0_1", "i2c1", "i2c2"
+
+
+For SPEAr1310 machines:
+	"i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii",
+	"rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0",
+	"gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3",
+	"uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1",
+	"i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
+
+For SPEAr1340 machines:
+	"pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1",
+	"pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0",
+	"uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf",
+	"xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata"