diff options
| author |   Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2019-07-20 07:07:56 +0300 |
|---|---|---|
| committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2019-07-20 07:07:56 +0300 |
| commit | c39f2d9db0fd81ea20bb5cce9b3f082ca63753e2 (patch) | |
| tree | 8e80ed5601b4fb8880a2ca8e08802bc8b1f850bd /Documentation/hwmon/ltc4151 | |
| parent | Merge branch 'next' into for-linus (diff) | |
| parent | Input: alps - fix a mismatch between a condition check and its comment (diff) | |
| download | linux-dev-c39f2d9db0fd81ea20bb5cce9b3f082ca63753e2.tar.xz linux-dev-c39f2d9db0fd81ea20bb5cce9b3f082ca63753e2.zip | |
Merge branch 'next' into for-linus
Prepare second round of input updates for 5.3 merge window.
Diffstat (limited to 'Documentation/hwmon/ltc4151')
| -rw-r--r-- | Documentation/hwmon/ltc4151 | 47 |
1 files changed, 0 insertions, 47 deletions
diff --git a/Documentation/hwmon/ltc4151 b/Documentation/hwmon/ltc4151 deleted file mode 100644 index 43c667e6677a..000000000000 --- a/Documentation/hwmon/ltc4151 +++ /dev/null @@ -1,47 +0,0 @@ -Kernel driver ltc4151 -===================== - -Supported chips: - * Linear Technology LTC4151 - Prefix: 'ltc4151' - Addresses scanned: - - Datasheet: - http://www.linear.com/docs/Datasheet/4151fc.pdf - -Author: Per Dalen <per.dalen@appeartv.com> - - -Description ------------ - -The LTC4151 is a High Voltage I2C Current and Voltage Monitor. - - -Usage Notes ------------ - -This driver does not probe for LTC4151 devices, since there is no register -which can be safely used to identify the chip. You will have to instantiate -the devices explicitly. - -Example: the following will load the driver for an LTC4151 at address 0x6f -on I2C bus #0: -# modprobe ltc4151 -# echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device - - -Sysfs entries -------------- - -Voltage readings provided by this driver are reported as obtained from the ADIN -and VIN registers. - -Current reading provided by this driver is reported as obtained from the Current -Sense register. The reported value assumes that a 1 mOhm sense resistor is -installed. - -in1_input VDIN voltage (mV) - -in2_input ADIN voltage (mV) - -curr1_input SENSE current (mA) |