Merge tag 'hwmon-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - Add driver for Intersil ISL68137 PWM Controller

 - Add driver for Lochnagar 2

 - Add driver for Infineon IR38064 Voltage Regulator

 - Add support for TMP75B to lm75 driver

 - Convert documentation to ReST format

 - Use request_muxed_region for Super-IO accesses in several drivers

 - Add 'samples' attribute to ABI, and start using it

 - Add support for custom sysfs attributes to pmbus drivers (used in
   ISL68137 driver)

 - Introduce HWMON_CHANNEL_INFO macro

 - Automated changes:
      - Use permission specific [SENSOR_][DEVICE_]ATTR variants
      - Fix build warnings due to unused of_device_id structures
      - Use HWMON_CHANNEL_INFO macro

 - Various minor improvements and fixes

* tag 'hwmon-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (125 commits)
  hwmon: (lm75) Add support for TMP75B
  dt-bindings: hwmon: Add tmp75b to lm75.txt
  hwmon: (s3c) Use dev_get_drvdata()
  hwmon: (max6650) Drop call to thermal_cdev_update
  docs: hwmon: remove the extension from .rst files
  docs: hwmon: convert three docs to ReST format
  hwmon: (max6650) add thermal cooling device capability
  hwmon: (ina3221) Add voltage conversion time settings
  hwmon: (ina3221) Do not read-back to cache reg_config
  docs: hwmon: Add an index file and rename docs to *.rst
  docs: hwmon: convert remaining files to ReST format
  docs: hwmon: misc files: convert to ReST format
  docs: hwmon: pmbus files: convert to ReST format
  docs: hwmon: k8temp, w83793: convert to ReST format
  docs: hwmon: da9052, da9055: convert to ReST format
  docs: hwmon: wm831x, wm8350: convert to ReST format
  docs: hwmon: dme1737, vt1211: convert to ReST format
  docs: hwmon: ads1015: convert to ReST format
  docs: hwmon: asc7621: convert to ReST format
  docs: hwmon: ibmpowernv: convert to ReST format
  ...

1 files changed, 58 insertions, 0 deletions

diff --git a/Documentation/hwmon/shtc1.rst b/Documentation/hwmon/shtc1.rst
new file mode 100644
index 000000000000..aa116332ba26
--- /dev/null
+++ b/Documentation/hwmon/shtc1.rst
@@ -0,0 +1,58 @@
+Kernel driver shtc1
+===================
+
+Supported chips:
+
+  * Sensirion SHTC1
+
+    Prefix: 'shtc1'
+
+    Addresses scanned: none
+
+    Datasheet: http://www.sensirion.com/file/datasheet_shtc1
+
+
+
+  * Sensirion SHTW1
+
+    Prefix: 'shtw1'
+
+    Addresses scanned: none
+
+    Datasheet: Not publicly available
+
+
+
+Author:
+
+  Johannes Winkelmann <johannes.winkelmann@sensirion.com>
+
+Description
+-----------
+
+This driver implements support for the Sensirion SHTC1 chip, a humidity and
+temperature sensor. Temperature is measured in degrees celsius, relative
+humidity is expressed as a percentage. Driver can be used as well for SHTW1
+chip, which has the same electrical interface.
+
+The device communicates with the I2C protocol. All sensors are set to I2C
+address 0x70. See Documentation/i2c/instantiating-devices for methods to
+instantiate the device.
+
+There are two options configurable by means of shtc1_platform_data:
+
+1. blocking (pull the I2C clock line down while performing the measurement) or
+   non-blocking mode. Blocking mode will guarantee the fastest result but
+   the I2C bus will be busy during that time. By default, non-blocking mode
+   is used. Make sure clock-stretching works properly on your device if you
+   want to use blocking mode.
+2. high or low accuracy. High accuracy is used by default and using it is
+   strongly recommended.
+
+sysfs-Interface
+---------------
+
+temp1_input
+	- temperature input
+humidity1_input
+	- humidity input