Merge branch 'master'; commit 'v2.6.38-rc7' into next

11 files changed, 186 insertions, 22 deletions

diff --git a/Documentation/hwmon/adm9240 b/Documentation/hwmon/adm9240
index 2c6f1fed4618..36e8ec6aa868 100644
--- a/Documentation/hwmon/adm9240
+++ b/Documentation/hwmon/adm9240
@@ -155,7 +155,7 @@ connected to a normally open switch.
 The ADM9240 provides an internal open drain on this line, and may output
 a 20 ms active low pulse to reset an external Chassis Intrusion latch.
 
-Clear the CI latch by writing value 1 to the sysfs chassis_clear file.
+Clear the CI latch by writing value 0 to the sysfs intrusion0_alarm file.
 
 Alarm flags reported as 16-bit word
 
diff --git a/Documentation/hwmon/ads7828 b/Documentation/hwmon/ads7828
index 75bc4beaf447..2bbebe6f771f 100644
--- a/Documentation/hwmon/ads7828
+++ b/Documentation/hwmon/ads7828
@@ -9,7 +9,7 @@ Supported chips:
                http://focus.ti.com/lit/ds/symlink/ads7828.pdf
 
 Authors:
-        Steve Hardy <steve@linuxrealtime.co.uk>
+        Steve Hardy <shardy@redhat.com>
 
 Module Parameters
 -----------------
diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737
index fc5df7654d63..4d2935145a1c 100644
--- a/Documentation/hwmon/dme1737
+++ b/Documentation/hwmon/dme1737
@@ -42,7 +42,7 @@ Description
 This driver implements support for the hardware monitoring capabilities of the
 SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
 and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
-temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
+temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
 automatically.
@@ -105,6 +105,7 @@ SCH5127:
 	in4: V1_IN				0V - 1.5V
 	in5: VTR	(+3.3V standby)		0V - 4.38V
 	in6: Vbat	(+3.0V)			0V - 4.38V
+	in7: Vtrip	(+1.5V)			0V - 1.99V
 
 Each voltage input has associated min and max limits which trigger an alarm
 when crossed.
@@ -217,10 +218,10 @@ cpu0_vid			RO	CPU core reference voltage in
 vrm				RW	Voltage regulator module version
 					number.
 
-in[0-6]_input			RO	Measured voltage in millivolts.
-in[0-6]_min			RW	Low limit for voltage input.
-in[0-6]_max			RW	High limit for voltage input.
-in[0-6]_alarm			RO	Voltage input alarm. Returns 1 if
+in[0-7]_input			RO	Measured voltage in millivolts.
+in[0-7]_min			RW	Low limit for voltage input.
+in[0-7]_max			RW	High limit for voltage input.
+in[0-7]_alarm			RO	Voltage input alarm. Returns 1 if
 					voltage input is or went outside the
 					associated min-max range, 0 otherwise.
 
@@ -324,3 +325,4 @@ fan5			opt		opt
 pwm5			opt		opt
 fan6			opt		opt
 pwm6			opt		opt
+in7						yes
diff --git a/Documentation/hwmon/ds620 b/Documentation/hwmon/ds620
new file mode 100644
index 000000000000..1fbe3cd916cc
--- /dev/null
+++ b/Documentation/hwmon/ds620
@@ -0,0 +1,34 @@
+Kernel driver ds620
+===================
+
+Supported chips:
+  * Dallas Semiconductor DS620
+    Prefix: 'ds620'
+    Datasheet: Publicly available at the Dallas Semiconductor website
+               http://www.dalsemi.com/
+
+Authors:
+        Roland Stigge <stigge@antcom.de>
+        based on ds1621.c by
+        Christian W. Zuckschwerdt <zany@triq.net>
+
+Description
+-----------
+
+The DS620 is a (one instance) digital thermometer and thermostat. It has both
+high and low temperature limits which can be user defined (i.e.  programmed
+into non-volatile on-chip registers). Temperature range is -55 degree Celsius
+to +125. Between 0 and 70 degree Celsius, accuracy is 0.5 Kelvin. The value
+returned via sysfs displays post decimal positions.
+
+The thermostat function works as follows: When configured via platform_data
+(struct ds620_platform_data) .pomode == 0 (default), the thermostat output pin
+PO is always low. If .pomode == 1, the thermostat is in PO_LOW mode. I.e., the
+output pin PO becomes active when the temperature falls below temp1_min and
+stays active until the temperature goes above temp1_max.
+
+Likewise, with .pomode == 2, the thermostat is in PO_HIGH mode. I.e., the PO
+output pin becomes active when the temperature goes above temp1_max and stays
+active until the temperature falls below temp1_min.
+
+The PO output pin of the DS620 operates active-low.
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 0e76ef12e4c6..a22ecf48f255 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -51,7 +51,8 @@ Supported chips:
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet: -
+    Datasheet:
+	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
 Sysfs entries
 -------------
 
 temp1_input		Temperature (RO)
-temp1_min		Minimum temperature (RW)
-temp1_max		Maximum temperature (RW)
-temp1_crit		Critical high temperature (RW)
+temp1_min		Minimum temperature (RO or RW)
+temp1_max		Maximum temperature (RO or RW)
+temp1_crit		Critical high temperature (RO or RW)
 
-temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_crit_hyst		Critical hysteresis temperature (RO or RW)
 temp1_max_hyst		Maximum hysteresis temperature (RO)
 
 temp1_min_alarm		Temperature low alarm
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index 6526eee525a6..d2b56a4fd1f5 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -9,6 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver
diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93
index 7a10616d0b44..f3b2ad2ceb01 100644
--- a/Documentation/hwmon/lm93
+++ b/Documentation/hwmon/lm93
@@ -6,6 +6,10 @@ Supported chips:
     Prefix 'lm93'
     Addresses scanned: I2C 0x2c-0x2e
     Datasheet: http://www.national.com/ds.cgi/LM/LM93.pdf
+  * National Semiconductor LM94
+    Prefix 'lm94'
+    Addresses scanned: I2C 0x2c-0x2e
+    Datasheet: http://www.national.com/ds.cgi/LM/LM94.pdf
 
 Authors:
 	Mark M. Hoffman <mhoffman@lightlink.com>
@@ -56,6 +60,9 @@ previous motherboard management ASICs and uses some of the LM85's features
 for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual
 processor Xeon class motherboard with a minimum of external components.
 
+LM94 is also supported in LM93 compatible mode. Extra sensors and features of
+LM94 are not supported.
+
 
 User Interface
 --------------
diff --git a/Documentation/hwmon/sht21 b/Documentation/hwmon/sht21
new file mode 100644
index 000000000000..db17fda45c3e
--- /dev/null
+++ b/Documentation/hwmon/sht21
@@ -0,0 +1,49 @@
+Kernel driver sht21
+===================
+
+Supported chips:
+  * Sensirion SHT21
+    Prefix: 'sht21'
+    Addresses scanned: none
+    Datasheet: Publicly available at the Sensirion website
+    http://www.sensirion.com/en/pdf/product_information/Datasheet-humidity-sensor-SHT21.pdf
+
+  * Sensirion SHT25
+    Prefix: 'sht21'
+    Addresses scanned: none
+    Datasheet: Publicly available at the Sensirion website
+    http://www.sensirion.com/en/pdf/product_information/Datasheet-humidity-sensor-SHT25.pdf
+
+Author:
+  Urs Fleisch <urs.fleisch@sensirion.com>
+
+Description
+-----------
+
+The SHT21 and SHT25 are humidity and temperature sensors in a DFN package of
+only 3 x 3 mm footprint and 1.1 mm height. The difference between the two
+devices is the higher level of precision of the SHT25 (1.8% relative humidity,
+0.2 degree Celsius) compared with the SHT21 (2.0% relative humidity,
+0.3 degree Celsius).
+
+The devices communicate with the I2C protocol. All sensors are set to the same
+I2C address 0x40, so an entry with I2C_BOARD_INFO("sht21", 0x40) can be used
+in the board setup code.
+
+sysfs-Interface
+---------------
+
+temp1_input - temperature input
+humidity1_input - humidity input
+
+Notes
+-----
+
+The driver uses the default resolution settings of 12 bit for humidity and 14
+bit for temperature, which results in typical measurement times of 22 ms for
+humidity and 66 ms for temperature. To keep self heating below 0.1 degree
+Celsius, the device should not be active for more than 10% of the time,
+e.g. maximum two measurements per second at the given resolution.
+
+Different resolutions, the on-chip heater, using the CRC checksum and reading
+the serial number are not supported yet.
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 645699010551..c6559f153589 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -384,10 +384,20 @@ curr[1-*]_min	Current min value.
 		Unit: milliampere
 		RW
 
+curr[1-*]_lcrit	Current critical low value
+		Unit: milliampere
+		RW
+
+curr[1-*]_crit	Current critical high value.
+		Unit: milliampere
+		RW
+
 curr[1-*]_input	Current input value
 		Unit: milliampere
 		RO
 
+Also see the Alarms section for status flags associated with currents.
+
 *********
 * Power *
 *********
@@ -450,13 +460,6 @@ power[1-*]_accuracy		Accuracy of the power meter.
 				Unit: Percent
 				RO
 
-power[1-*]_alarm		1 if the system is drawing more power than the
-				cap allows; 0 otherwise.  A poll notification is
-				sent to this file when the power use exceeds the
-				cap.  This file only appears if the cap is known
-				to be enforced by hardware.
-				RO
-
 power[1-*]_cap			If power use rises above this limit, the
 				system should take action to reduce power use.
 				A poll notification is sent to this file if the
@@ -479,6 +482,20 @@ power[1-*]_cap_min		Minimum cap that can be set.
 				Unit: microWatt
 				RO
 
+power[1-*]_max			Maximum power.
+				Unit: microWatt
+				RW
+
+power[1-*]_crit			Critical maximum power.
+				If power rises to or above this limit, the
+				system is expected take drastic action to reduce
+				power consumption, such as a system shutdown or
+				a forced powerdown of some devices.
+				Unit: microWatt
+				RW
+
+Also see the Alarms section for status flags associated with power readings.
+
 **********
 * Energy *
 **********
@@ -488,6 +505,15 @@ energy[1-*]_input		Cumulative energy use
 				RO
 
 
+************
+* Humidity *
+************
+
+humidity[1-*]_input		Humidity
+				Unit: milli-percent (per cent mille, pcm)
+				RO
+
+
 **********
 * Alarms *
 **********
@@ -501,6 +527,7 @@ implementation.
 
 in[0-*]_alarm
 curr[1-*]_alarm
+power[1-*]_alarm
 fan[1-*]_alarm
 temp[1-*]_alarm
 		Channel alarm
@@ -512,12 +539,20 @@ OR
 
 in[0-*]_min_alarm
 in[0-*]_max_alarm
+in[0-*]_lcrit_alarm
+in[0-*]_crit_alarm
 curr[1-*]_min_alarm
 curr[1-*]_max_alarm
+curr[1-*]_lcrit_alarm
+curr[1-*]_crit_alarm
+power[1-*]_cap_alarm
+power[1-*]_max_alarm
+power[1-*]_crit_alarm
 fan[1-*]_min_alarm
 fan[1-*]_max_alarm
 temp[1-*]_min_alarm
 temp[1-*]_max_alarm
+temp[1-*]_lcrit_alarm
 temp[1-*]_crit_alarm
 temp[1-*]_emergency_alarm
 		Limit alarm
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index fb145e5e722a..8432e1118173 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -91,3 +91,25 @@ isaset -y -f 0x2e 0xaa
 
 The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but
 0x4e/0x4f is also possible.
+
+Voltage pin mapping
+-------------------
+
+Here is a summary of the voltage pin mapping for the W83627THF. This
+can be useful to convert data provided by board manufacturers into
+working libsensors configuration statements.
+
+    W83627THF		|
+  Pin	| Name		| Register	| Sysfs attribute
+-----------------------------------------------------
+  100	| CPUVCORE	| 20h		| in0
+   99	| VIN0		| 21h		| in1
+   98	| VIN1		| 22h		| in2
+   97	| VIN2		| 24h		| in4
+  114	| AVCC		| 23h		| in3
+   61	| 5VSB		| 50h (bank 5)	| in7
+   74	| VBAT		| 51h (bank 5)	| in8
+
+For other supported devices, you'll have to take the hard path and
+look up the information in the datasheet yourself (and then add it
+to this document please.)
diff --git a/Documentation/hwmon/w83793 b/Documentation/hwmon/w83793
index 51171a83165b..6cc5f639b721 100644
--- a/Documentation/hwmon/w83793
+++ b/Documentation/hwmon/w83793
@@ -92,7 +92,7 @@ This driver implements support for Winbond W83793G/W83793R chips.
 
 * Chassis
   If the case open alarm triggers, it will stay in this state unless cleared
-  by any write to the sysfs file "chassis".
+  by writing 0 to the sysfs file "intrusion0_alarm".
 
 * VID and VRM
   The VRM version is detected automatically, don't modify the it unless you