diff options
| author |   Yuchung Cheng <ycheng@google.com> | 2018-05-16 16:40:10 -0700 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2018-05-17 15:41:28 -0400 |
| commit | 20b654dfe1beaca60ab51894ff405a049248433d (patch) | |
| tree | a6f3037a9fd384c261db36c71a2b4e825104c8a4 /Documentation/networking/ip-sysctl.txt | |
| parent | net: ethernet: ti: cpsw: disable mq feature for "AM33xx ES1.0" devices (diff) | |
| download | linux-dev-20b654dfe1beaca60ab51894ff405a049248433d.tar.xz linux-dev-20b654dfe1beaca60ab51894ff405a049248433d.zip | |
tcp: support DUPACK threshold in RACK
This patch adds support for the classic DUPACK threshold rule
(#DupThresh) in RACK.
When the number of packets SACKed is greater or equal to the
threshold, RACK sets the reordering window to zero which would
immediately mark all the unsacked packets below the highest SACKed
sequence lost. Since this approach is known to not work well with
reordering, RACK only uses it if no reordering has been observed.
The DUPACK threshold rule is a particularly useful extension to the
fast recoveries triggered by RACK reordering timer. For example
data-center transfers where the RTT is much smaller than a timer
tick, or high RTT path where the default RTT/4 may take too long.
Note that this patch differs slightly from RFC6675. RFC6675
considers a packet lost when at least #DupThresh higher-sequence
packets are SACKed.
With RACK, for connections that have seen reordering, RACK
continues to use a dynamically-adaptive time-based reordering
window to detect losses. But for connections on which we have not
yet seen reordering, this patch considers a packet lost when at
least one higher sequence packet is SACKed and the total number
of SACKed packets is at least DupThresh. For example, suppose a
connection has not seen reordering, and sends 10 packets, and
packets 3, 5, 7 are SACKed. RFC6675 considers packets 1 and 2
lost. RACK considers packets 1, 2, 4, 6 lost.
There is some small risk of spurious retransmits here due to
reordering. However, this is mostly limited to the first flight of
a connection on which the sender receives SACKs from reordering.
And RFC 6675 and FACK loss detection have a similar risk on the
first flight with reordering (it's just that the risk of spurious
retransmits from reordering was slightly narrower for those older
algorithms due to the margin of 3*MSS).
Also the minimum reordering window is reduced from 1 msec to 0
to recover quicker on short RTT transfers. Therefore RACK is more
aggressive in marking packets lost during recovery to reduce the
reordering window timeouts.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation/networking/ip-sysctl.txt')
| -rw-r--r-- | Documentation/networking/ip-sysctl.txt | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 59afc9a10b4f..13bbac50dc8b 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -451,6 +451,7 @@ tcp_recovery - INTEGER RACK: 0x1 enables the RACK loss detection for fast detection of lost retransmissions and tail drops. RACK: 0x2 makes RACK's reordering window static (min_rtt/4). + RACK: 0x4 disables RACK's DUPACK threshold heuristic Default: 0x1 |